Influência da geometria oclusal e material restaurador na carga para fratura e distribuição de tensões em coroas totais

Pós-graduação em Odontologia Restauradora - ICT

Biomechanical influence of crown-to-implant ratio on stress distribution over internal hexagon short implant: 3-D finite element analysis with statistical test

The study of short implants is relevant to the biomechanics of dental implants, and research on crown increase has implications for the daily clinic. The aim of this study was to analyze the biomechanical interactions of a singular implant-supported prosthesis of different crown heights under vertical and oblique force, using the 3-D finite element method. Six 3-D models were designed with Invesalius 3.0, Rhinoceros 3D 4.0, and Solidworks 2010 software. Each model was constructed with a mandibular segment of bone block, including an implant supporting a screwed metal-ceramic crown. The crown height was set at 10, 12.5, and 15 mm. The applied force was 200 N (axial) and 100 N (oblique). We performed an ANOVA statistical test and Tukey tests; p < 0.05 was considered statistically significant. The increase of crown height did not influence the stress distribution on screw prosthetic (p > 0.05) under axial load. However, crown heights of 12.5 and 15 mm caused statistically significant damage to the stress distribution of screws and to the cortical bone (p <0.001) under oblique load. High crown to implant (C/I) ratio harmed microstrain distribution on bone tissue under axial and oblique loads (p < 0.001). Crown increase was a possible deleterious factor to the screws and to the different regions of bone tissue. (C) 2014 Elsevier Ltd. All rights reserved.

Vertical variation in autumn leaf phenology of Fagus sylvatica L. in southern Germany

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hopping-tunneling model to describe electric charge injection at metal/organic semiconductor heterojunctions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características agronômicas, bromatológicas e econômicas de alturas de corte para ensilagem da cultura do milho

The aim was to evaluate agronomic, bromatologic and economical characteristics harvest heights for ensiling of corn. The trial was conducted in randomized block design and treatments corresponded to harvest heights of 20; 50; 80 and 110 cm from the soil surface. The agronomic evaluations were conducted 114 days after planting. The percentage of dry matter (DM) and productivity of stem, grain and participation of potassium remaining in the stem increased linearly with increasing cutting height (p<0.05). Therefore, the mass used at ensiling decreased proportionally with increasing cutting height (p<0.05). The silage quality was improved because of the increase in the cutting height. We observed higher crude protein (CP) content and energetic value in the silage harvested at 110 cm from the soil surface, while there was lower fiber content. However, silages produced with plants harvested at 110 cm from the soil surface showed the highest production cost (4.47 times greater than cycling through K in the remainder of the stem). The agronomic and bromatologic characteristics of corn silage improves with increasing cutting height, but the increase cutting height unfeasible economically the practice silage when the generation of final products is not computed. Thus, it is recommended that the cutting height of the corn plant is at most 50 cm.

Seasonal fluctuation of soil carbon dioxide emission in differently managed pastures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interação pontas-adjuvantes na estimativa do risco potencial de deriva de pulverizações

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Retrieval of Trichostrongylus colubriformis infective larvae from grass contaminated in winter and in spring

The survival of infective larvae (L3) of Trichostrongylus colubriformis was evaluated on Brachiaria, Coast-cross and Aruana forage grasses. Feces of sheep parasitized exclusively by T. colubriformis were deposited in winter and spring on experimental plots whose grasses were cut at two heights: 5 cm and 30 cm. One, two, four, eight, 12 and 16 weeks after depositing the feces, fecal and forage samples were collected for the retrieval and quantification of L3. Retrieval of L3 from feces and forage was negligible in winter due to the dry weather, although a few larvae were retrieved in the last larval collections. However, L3 retrieval from fecal samples was greater in spring, especially two weeks after feces were deposited on 30 cm high grasses. At this time, the L3 retrieval rate from the three forage grasses differed significantly (P < 0.05), with Aruana grass showing the highest average L3 retrieval rate, followed by Coast-cross and Brachiaria. In conclusion, the winter drought proved very unfavorable for the presence of L3 in the environment, and the microclimate of Aruana pastureland was generally the most favorable for the retrieval of infective larvae.

Effect of crown-to-implant ratio on peri-implant stress: a finite element analysis

The aim of this study was to evaluate stress distribution in the fixation screws and bone tissue around implants in single-implant supported prostheses with crowns of different heights (10,12.5, 15 mm crown-to-implant ratio 1:1, 1.25:1, 1.5:1, respectively). It was designed using three 3-Dmodels. Each model was developed with a mandibular segment of bone block including an internal hexagon implant supporting a screw-retained, single metalceramic crown. The crown height was set at 10, 12.5, and 15 mm with crown-to-implant ratio of 1:1, 1.25:1, 1.5:1, respectively. The applied forces were 200 N (axial) and 100 N (oblique). The increase of crown height showed differences with the oblique load in some situations. By von Mises'criterion, a high stress area was concentrated at the implant/fixation screw and abutment/implant interfaces at crown-to-implant ratio of 1:1, 1.25:1, 1.5:1, respectively. Using the maxiinum principal criteria, the buccal regions showed higher traction stress intensity, whereas the distal regions showed the largest compressive stress in all models. The increase of C/I ratio must be carefully evaluated by the dentist since the increase of this C/I ratio is proportional to the increase of average stress for both screw fixation (C/I 1:1 to 1:1.25 ratio = 30.1% and C/I 1:1 to 1 :1.5 ratio = 46.3%) and bone tissue (C/I 1:1 to 1:1.25 ratio = 30% and C/I 1:1 to 1:1.5 ratio = 51.5%). (C) 2014 Elsevier B.V. All rights reserved.

Características morfogênicas e estruturais da Brachiaria brizantha cv. Marandu submetida a diferentes doses de nitrogênio e alturas de resíduos

The objective of this study was to evaluate the rate of leaf appearance, leaf elongation rate, number of green leaves, length of blade and stem of Brachiaria brizantha cv. Marandu under different nitrogen levels and two residue heights. A randomized block design was used in a 4 x 2 factorial scheme, four doses of nitrogen (100, 200, 300 and 400 kg N ha(-1) year(-1)) and two residue heights (5 and 15 cm). There was significant interaction between residue height and nitrogen levels for leaf appearance rate of signal grass, which was influenced negatively and linearly by the residue heights being observed an average reduction of 28.20% from lower to higher residue. There was no interaction between the levels of nitrogen x residue height on the number of green leaves. The dosage that provided the highest stalk in the residue height of 5 cm was of 271.5 kg N ha(-1). An increase of 0.0745 cm tiller(-1) day(-1) for 1 kg of N ha(-1) applied to height of 15 cm of residue was observed. Nitrogen fertilization contributes positively to growth and development of rates of appearance and leaf extension. The management of pasture of Brachiaria brizantha cv. Marandu with 5 cm of residue and fertilization with 100 kg N ha(-1) provided better answer morphogenic traits.

Measurement of the natural variation of 13C:12C ratio in leaves at Reserva Ducke Forest, central Amazonia

Investigation of carbon isotope fractionation by plants was carried out at two sub-areas located in Reserva Ducke, central Amazonia: open reserve (virgin forest with low density of plant species); and closed reserve (virgin forest with high density of plant species). Preliminary results (δ‰ 13C: 12C values, PDB) of leaf analysis at different plant heights indicate the following: Eschweilera matamata Hub. (Lecythidaceae), common name 'matamata', -31.55±0.61; Protium heptaplyllum March. (Burseraceae), common name 'breu branco', -32.34±1.39; Calophyllum brasiliense Camb. (Guttiferae), common name 'jacareúba', -30.72±0.23; Scleronema micrantthum Ducke. (Bombacaceae), common name 'cardeiro'. -28.81±0.68; and Carapa guianensis Aubl. (Meliaceae), common name 'andiroba', -31.07±0.51. It is possible that the plant species analysed belong to the C3 photosynthetic cycle. In general, the species in the open reserve show differences of the order of 1.66±0.34‰ (greater in 13C) as compared with the same species in the closed reserve. The old leaves show differences in the relative isotopic enrichment (δ) of the order of 1‰, being smaller in new leaves in both reserves. The probable occurrence of an isotopic gradient from the lower (2-5 m) to the upper part (15-20 m) of the plant, of the order of 1.3‰, smaller in 13C, in species from the dense forest was noted. However, only two plants from each species were analysed during a two-year period, data obtained to far are still preliminary, and results should, therefore, be revised. Moreover, according to the literature, the natural carbon isotope fractionation by plants shows metabolic, physiological and environmental dependence. © 1991.

Variabilidade no andar com ultrapassagem de obstáculo de idosos com doença de Parkinson

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mananas e glucanas em dietas para leitões recém-desmamados

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Implantes curtos do tipo cone-Morse: proporção coroa-implante

The purpose of this study was to analyze the biomechanical interactions in bone tissue between short implants and implant-supported crowns with different heights. Two models were made using the programs InVesalius 3.0, Rhinoceros 4.0 and Solidworks 2010. The models were established from a bone block with the short implant (3.75 x 8.5 mm) with geometry Morse taper connection (MT). The height of the crown (cemented) was set at 10.0 mm and 15.00 mm. The models were processed by programs and 10 NEiNastran Femap 10.0. The force applied was 200N (vertical) and 100N (oblique). The results were plotted on maps Voltage Maximum Principal. Statistical analysis was performed using ANOVA. The results showed that the increase in crown height, increased stress concentration in the crown of 15 mm under oblique loading (p <0.001), the oblique loading has significantly expanded the area of stress concentration (p <0.001). Conclusion:the increase of the crown increased the stress concentration, being statistically significant for short implants Morse taper. The mesial and distal region had the highest concentration of stresses under oblique loading. The oblique loading was more harmful when compared with axial loading, being statistically significant.

Altura do pasto e suplementação na recria de tourinhos e efeitos sobre a terminação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)