Establishing occupational and environmental health design requirements for Lunar and Mars settlements

In a study of Lunar and Mars settlement concepts, an analysis was made of fundamental design assumptions in five technical areas against a model list of occupational and environmental health concerns. The technical areas included the proposed science projects to be supported, habitat and construction issues, closed ecosystem issues, the "MMM" issues--mining, material-processing, and manufacturing, and the human elements of physiology, behavior and mission approach. Four major lessons were learned. First it is possible to relate public health concerns to complex technological development in a proactive design mode, which has the potential for long-term cost savings. Second, it became very apparent that prior to committing any nation or international group to spending the billions to start and complete a lunar settlement, over the next century, that a significantly different approach must be taken from those previously proposed, to solve the closed ecosystem and "MMM" problems. Third, it also appears that the health concerns and technology issues to be addressed for human exploration into space are fundamentally those to be solved for human habitation of the earth (as a closed ecosystem) in the 21st century. Finally, it is proposed that ecosystem design modeling must develop new tools, based on probabilistic models as a step up from closed circuit models. ^

Design and Realization of an Energy Harvester Using Pulsating Arterial Pressure

Most medical implants run on batteries, which require costly and tedious replacement or recharging. It is believed that micro-generators utilizing intracorporeal energy could solve these problems. However, such generators do not, at this time, meet the energy requirements of medical implants.This paper highlights some essential aspects of designing and implementing a power source that scavenges energy from arterial expansion and contraction to operate an implanted medical device. After evaluating various potentially viable transduction mechanisms, the fabricated prototype employs an electromagnetic transduction mechanism. The artery is inserted into a laboratory-fabricated flexible coil which is permitted to freely deform in a magnetic field. This work also investigates the effects of the arterial wall's material properties on energy harvesting potential. For that purpose, two types of arteries (Penrose X-ray tube, which behave elastically, and an artery of a Göttinger minipig, which behaves viscoelastically) were tested. No noticeable difference could be observed between these two cases. For the pig artery, average harvestable power was 42 nW. Moreover, peak power was 2.38 μW. Both values are higher than those of the current state of the art (6 nW/16 nW). A theoretical modelling of the prototype was developed and compared to the experimental results.

Fluorescence-encoded gold nanoparticles: library design and modulation of cellular uptake into dendritic cells.

In order to harness the unique properties of nanoparticles for novel clinical applications and to modulate their uptake into specific immune cells we designed a new library of homo- and hetero-functional fluorescence-encoded gold nanoparticles (Au-NPs) using different poly(vinyl alcohol) and poly(ethylene glycol)-based polymers for particle coating and stabilization. The encoded particles were fully characterized by UV-Vis and fluorescence spectroscopy, zeta potential and dynamic light scattering. The uptake by human monocyte derived dendritic cells in vitro was studied by confocal laser scanning microscopy and quantified by fluorescence-activated cell sorting and inductively coupled plasma atomic emission spectroscopy. We show how the chemical modification of particle surfaces, for instance by attaching fluorescent dyes, can conceal fundamental particle properties and modulate cellular uptake. In order to mask the influence of fluorescent dyes on cellular uptake while still exploiting its fluorescence for detection, we have created hetero-functionalized Au-NPs, which again show typical particle dependent cellular interactions. Our study clearly prove that the thorough characterization of nanoparticles at each modification step in the engineering process is absolutely essential and that it can be necessary to make substantial adjustments of the particles in order to obtain reliable cellular uptake data, which truly reflects particle properties.

Multifunctional Coordination Compounds: Design and Properties [and Discussion]

M. Verdaguer

Production Streamlining through Design, Implementation, and Analysis of Lean Manufacturing Methods

Through the correct implementation of lean manufacturing methods, a company can greatly improve their business. Over a period of three months at TTM Technologies, I utilized my knowledge to fix existing problems ans streamline production. In addition, other trouble areas in their production process were discovered and proper lean methods were used to address them. TTM Technologies saw many changed in the right direction over this time period.

Proceedings of the 10th Annual Biochemical Engineering Symposium

This the tenth in a series of symposia devoted to talks by students on their biochemical engineering research. The first, third, fifth, and ninth were at Kansas State University in Manhattan, the second and fourth were at the University of Nebraska–Lincoln, the sixth was in Kansas City in conjunction with the 81st American Institute of Chemical Engineers National Meeting, the seventh was at Iowa State University in Ames, and the eighth was held at the University of Missouri–Columbia. Contents"Combined Autohydrolysis-Organosolv Pretreatment of Lignocellulosic Materials," Robert A. Lewis, Colorado State University "An Investigation of Cellulase Activity Assays," Minhhuong Nguyen, University of Missouri–Columbia "Action Pattern of a Xylobiohydrolase from Aspergillus niger," Mary M. Frederick, Iowa State University "Estimation of Heats of Combustion of Biomass from Elemental Analysis Using Available Electron Concepts," Snehal A. Patel, Kansas State University "Design of a Wheat Straw to Ethanol Conversion Facility," Michael M. Meagher, Colorado State University "Effects of Salt, Heat, and Physical Form on the Fermentation of Bananas," Carl Drewel, University of Missouri–Columbia "Gas Hold-up in the Downflow Section of a Split Cylinder Airlift Column," Vasanti Deshpande, Kansas State University "Measurement of Michaelis Constants for Soluble and Immobilized Glucoamylase," Robert A. Lesch, Iowa State University "Kinetics of Alkaline Oxidation and Degradation of Sugars," Alfred R. Fratzke, Iowa State University "Stability of Cereal Protein During Microbial Growth on Grain Dust," Bamidele O. Solomon, Kansas State University

Proceedings of the 14th Annual Biochemical Engineering Symposium

The Annual Biochemical Engineering Symposium series is devoted to presentations by students on their research topics. The fourteenth event, held in 1984, was organized at the University of Missouri–Columbia. It was attended by the biochemical engineering faculty and the students from Colorado State University, Iowa State University, Kansas State University, University of Missouri–Columbia, University of Missouri–Rolla and Washington University, St. Louis. Contents"Estimation of Product Formation Kinetics and Microbial Yield Parameters for Anaerobic Organic Acid and Solvent Production," M.D. Oner, Kansas State University "Characterization of Soy Protein Texturization in a Complex Bioreactor," J.L. Ibave, Colorado State University "Acid and Solvent Fermentations Using Mixed Cultures," D. Stevens, University of Missouri–Columbia "Preliminary Process Design for Ethanol from Sweet Sorghum Ensilage Feedstock," Keith D. Lange, Colorado State University "Lamella Settlers in Ethanol Fermentation," Yong Jayanata, University of Missouri–Columbia "Bubble Size Distribution in the Down Flow Section of an Air-Lift Column," Snehal A. Patel and C.H. Lee, Kansas State University "The Sensitivity of Plant Cells to Shear Stress," Morris Z. Resenberg and Eric H. Dunlap, Washington University, St. Louis "Estimation of Growth Yield Parameters Associated with Microbial Growth," Hyeon Y. Lee, Kansas State University "Capillary Gas Chromatography of Trimethylsilylated Trisaccharides," Etienne J.M. Selosse, Iowa State University "Subsite Mapping of an Endo-Xylanase Labeled Xylooligo-saccharides," Bernard Y. Tao, Iowa State University "Cellulase Enzyme Recycle," Kate M.V. Baptie, Colorado State University "Non-Homogeneous Poisson Renewal Reward Process for Modelling Enzymatic Hydrolysis of Cellulose," M.M. Gharpuray and L.T. Fan, Kansas State University

Proceedings of the Sixteenth Annual Biochemical Engineering Symposium

This volume represents the proceedings of the Sixteenth Annual Biochemical Engineering Symposium held at Kansas State University on April 26, 1986. Some of the papers describe the progress of ongoing projects, and others contain the results of completed projects. Only brief summaries are given of many of the papers that will be published in full elsewhere. ContentsEnd-Product Inhibition of the Acetone-Butanol Fermentation—Bob Kuhn, Colorado State University Effect of Multiple Substrates in Ethanal Fermentations from Cheese Whey—C.J. Wang, University of Missouri Extraction and Fermentation of Ensiled Sweet Sorghum—Karl Noah, Colorado State University Removal of Nucleic Acids from Bakers' Yeast—Richard M. Cordes, Iowa State University Modeling the Effects of Plasmid Replication and Product Repression on the Growth Rate of Recombinant Bacteria—William E. Bentley, University of Colorado Indirect Estimates of Cell Concentrations in Mass Cultivation of Bacterial Cells—Andrew Fisher, University of Missouri A Mathematical Model for Liquid Recirculation in Airlift Columns—C.H.Lee, Kansas State University Characterization of Imperfect Mixing of Batch Reactors by Two Compartment Model—Peter Sohn, University of Missouri First Order Breakage Model for the Degradation of Pullalan in the Batch Fermentor—Stephen A. Milligan, Kansas State University Synthesis and Nuclear Magnetic Resonance of 13C-Labeled Amylopectin and Maltooligosaccharides—Bernard Y. Tao, Iowa State University Preparation of Fungal Starter Culture in Gas Fluidized Bed Reactor—Pal Mihaltz, Colorado State University Yeast Flocculation and Sedimentation—David Szlag, University of Colorado Protein Enrichment of Extrusion Cooked Corn by Solid Substrate Fermentation—Lucas Alvarez-Martinez, Colorado State University Optimum Design of a Hollow Fiber Mammalian Cell Reactor—Thomas Chresand, Colorado State University Gas Chromatography and Nuclear Magnetic Resonance of Trifluoroacetylated Carbohydrates—Steven T. Summerfelt, Iowa State University Kinetic and Bioenergetic Considerations for Modeling Photosynthetic Microbial P~ocesses in Producing Biomass and Treating Wastewater—H. Y. Lee, Kansas State University Mathematical Modeling and Simulation of Bicarbonate-Limited Photsynthetic Growth in Continuous Culture—Craig Curless, Kansas State University Data Acquisition and Control of a Rotary Drum Solid State Fermentor—Mnasria A. Habib, Colorado State University Biodegradation of 2,4-Dichlorophenoxyacetic Acid (2,4-D)—Greg Sinton, Kansas State University

Geotechnical engineering characterization of sediments at DSDP Leg 72 Holes

The hydraulic piston coring device (HPC-15) allows recovery of deep ocean sediments with minimal disturbance. The device was used during Leg 72 of the Deep Sea Drilling Project (DSDP) aboard the Glomar Challenger. Core samples were recovered from bore holes in the Rio Grande Rise in the southwest Atlantic Ocean. Relatively undisturbed sediment cores were obtained from Holes 515A, 516, 517, and 518. The results of shipboard physical property measurements and on-shore geotechnical laboratory tests on these cores are presented in this chapter. A limited number of 0.3 m cores were obtained and used in a series of geotechnical tests, including one-dimensional consolidation, direct shear, Atterburg limit, particle size analysis, and specific gravity tests. Throughout the testing program, attention was focused on assessment of sample disturbance associated with the HPC-15 coring device. The HPC-15 device limits sample disturbance reasonably well in terrigenous muds (clays). However, sample disturbance associated with coring calcareous sediments (nannofossil-foraminifer oozes) is severe. The noncohesive, granular behavior of the calcareous sediments is vulnerable to severe disturbance, because of the design of the sampling head on the device at the time of Leg 72. A number of modifications to the sampling head design are recommended and discussed in this chapter. The modifications will improve sample quality for testing purposes and provide longer unbroken core samples by reducing friction between the sediment column and the sampling tool.

A design-phase PSA of anuclear-powered hydrogen plant

A probabilistic safety assessment (PSA) is being developed for a steam-methane reforming hydrogenproduction plant linked to a high-temperature gas-cooled nuclear reactor (HTGR). This work is based on the Japan Atomic Energy Research Institute's (JAERI) High Temperature Engineering Test Reactor (HTTR) prototype in Japan. The objective of this paper is to show how the PSA can be used for improving the design of the coupled plants. A simplified HAZOP study was performed to identify initiating events, based on existing studies. The results of the PSA show that the average frequency of an accident at this complex that could affect the population is 7 × 10−8 year−1 which is divided into the various end states. The dominant sequences are those that result in a methane explosion and occur with a frequency of 6.5 × 10−8 year−1, while the other sequences are much less frequent. The health risk presents itself if there are people in the vicinity who could be affected by the explosion. This analysis also demonstrates that an accident in one of the plants has little effect on the other. This is true given the design base distance between the plants, the fact that the reactor is underground, as well as other safety characteristics of the HTGR.

Methodology for the design of offshore wind farms

Although still in an early stage, offshore wind development is now characterized by a boom process. This leads to the necessity of applying an integral management model for the design of offshore wind facilities, being the purpose of the model to achieve technical, economical and environmental viability, all within a sustainable development framework. The foregoing led to the research project exposed in this paper, consisting of drawing up an offshore wind farms methodological proposal; this methodology has a global and/or general nature or point of view whilst searching for optimization of the overall process of operations leading to the design of this type of installations and establishing collated theoretical bases for the further development of management tools. This methodological proposal follows a classical engineering thought scheme: it begins with the alternatives study, and ends with the detailed design. With this in mind, the paper includes the following sections: introduction, methodology used for the research project, conditioning factors, methodological proposal for the design of offshore wind farms, checking the methodological proposal, and conclusions

Software Design Guidelines for Usability

For years, the Human Computer Interaction (HCI) community has crafted usability guidelines that clearly define what characteristics a software system should have in order to be easy to use. However, in the Software Engineering (SE) community keep falling short of successfully incorporating these recommendations into software projects. From a SE perspective, the process of incorporating usability features into software is not always straightforward, as a large number of these features have heavy implications in the underlying software architecture. For example, successfully including an “undo” feature in an application requires the design and implementation of many complex interrelated data structures and functionalities. Our work is focused upon providing developers with a set of software design patterns to assist them in the process of designing more usable software. This would contribute to the proper inclusion of specific usability features with high impact on the software design. Preliminary validation data show that usage of the guidelines also has positive effects on development time and overall software design quality.

Multidisciplinary Learning, Another way of Teaching Maths in Engineering

Multidisciplinary training is widely appreciated in industry and business, and nevertheless usually is not addressed in the early stages of most undergraduate programs. We outline here a multidisciplinary course for undergraduates studying engineering in which mathematics would be the common language, the transverse tool. The goal is motivating students to learn more mathematics and as a result, improve the quality of engineering education. The course would be structured around projects in four branches in engineering: mechanical, electrical, civil and bio-tech. The projects would be chosen among a wide variety of topics in engineering practice selected with the guidance of professional engineers. In these projects mathematics should interact with at least two other basic areas of knowledge in engineering: chemistry, computers science, economics, design or physics.

Design Patterns in Software Maintenance: An Experiment Replication at UPM - Experiences with the RESER'11 Joint Replication Project

Replication of software engineering experiments is crucial for dealing with validity threats to experiments in this area. Even though the empirical software engineering community is aware of the importance of replication, the replication rate is still very low. The RESER'11 Joint Replication Project aims to tackle this problem by simultaneously running a series of several replications of the same experiment. In this article, we report the results of the replication run at the Universidad Politécnica de Madrid. Our results are inconsistent with the original experiment. However, we have identified possible causes for them. We also discuss our experiences (in terms of pros and cons) during the replication.

Essentials in Ontology Engineering: Methodologies, Languages, and Tools

In the beginning of the 90s, ontology development was similar to an art: ontology developers did not have clear guidelines on how to build ontologies but only some design criteria to be followed. Work on principles, methods and methodologies, together with supporting technologies and languages, made ontology development become an engineering discipline, the so-called Ontology Engineering. Ontology Engineering refers to the set of activities that concern the ontology development process and the ontology life cycle, the methods and methodologies for building ontologies, and the tool suites and languages that support them. Thanks to the work done in the Ontology Engineering field, the development of ontologies within and between teams has increased and improved, as well as the possibility of reusing ontologies in other developments and in final applications. Currently, ontologies are widely used in (a) Knowledge Engineering, Artificial Intelligence and Computer Science, (b) applications related to knowledge management, natural language processing, e-commerce, intelligent information integration, information retrieval, database design and integration, bio-informatics, education, and (c) the Semantic Web, the Semantic Grid, and the Linked Data initiative. In this paper, we provide an overview of Ontology Engineering, mentioning the most outstanding and used methodologies, languages, and tools for building ontologies. In addition, we include some words on how all these elements can be used in the Linked Data initiative.