OTIMISMO, SUPORTE SOCIAL E VALORES DO TRABALHO COMO ANTECEDENTES DE BEM ESTAR SUBJETIVO DE TRABALHADORES

Este estudo teve por objetivo verificar a capacidade de otimismo, de suporte social e de valores do trabalho serem preditores de bem estar subjetivo, bem como analisar as relações de variáveis demográficas com essas variáveis de estudo, descrevê-las e examinar as relações entre elas. A amostra consistiu de 47 homens e de 101 mulheres com idade média de 41,00 anos (DP =10,72) que buscavam apoio em instituição para sua transição profissional. O instrumento de coleta de dados foi um questionário de autopreenchimento composto por cinco medidas que aferiram as variáveis incluídas no estudo: otimismo, percepção de suporte social, valores do trabalho, satisfação geral com a vida e afetos positivos e negativos, bem como variáveis demográficas: sexo, idade, estudo, trabalho, voluntariado, estado civil e permanência na instituição. Foram realizadas análises estatísticas descritivas, testadas diferenças entre médias, correlações, análise de variância e calculados modelos de regressão linear múltipla. As relações das variáveis de estudo com variáveis demográficas revelaram que as pessoas que não estudam percebem ter mais suporte prático e dão mais importância a motivações de autopromoção e de prestígio do que as que estudam. Os mais jovens com até 30 anos relataram que se percebem tendo mais apoio emocional e prático do que os mais velhos. Com o avanço da idade diminuem as percepções de suporte emocional e prático, contudo as pessoas com mais de 50 anos revelaram menos afetos negativos e maior satisfação com a vida do que os mais jovens. Casados revelaram dar menos importância do que separados, divorciados, viúvos, etc. à estabilidade no trabalho e segurança financeira; solteiros revelaram ter mais afetos negativos do que os casados. Homens relataram se sentir mais satisfeitos com a vida, ter mais afetos positivos e menos afetos negativos que mulheres. Quem realiza trabalho voluntário revelou ser mais otimista e ter menos afetos negativos do que aqueles que não realizam. Os dados revelaram que os pesquisados têm um bom nível de otimismo e uma percepção de suporte emocional maior do que a percepção de suporte prático; são motivados, principalmente por metas de realização no trabalho e de estabilidade e segurança financeira; sentem-se indiferentes quanto à satisfação com a vida; apresentam afetos positivos um pouco acima da indiferença; contudo sentem poucos afetos negativos. Disso decorre que um pouco mais de dois terços dos pesquisados apresentaram predominância de estados emocionais positivos sobre os negativos. O otimismo foi a variável que estabeleceu associações mais altas e em maior quantidade; correlacionou positivamente com valores de realização no trabalho, com valores de relações sociais, com valores do trabalho de prestígio, com satisfação com a vida e com afetos positivos; e correlacionou negativamente com afetos negativos. A percepção de suporte emocional correlacionou positivamente com valores de prestígio, afetos positivos e com satisfação com a vida; e correlacionou negativamente com afetos negativos. Percepção de suporte prático não apresentou correlações significativas com nenhuma variável de estudo. Afetos positivos correlacionaram-se positivamente com valores do trabalho de relações sociais e com valores do trabalho de prestígio. A partir da análise de três modelos preditivos encontrou-se que otimismo e suporte emocional repercutem positivamente sobre a satisfação com a vida e sobre afetos positivos. Otimismo repercute negativamente sobre afetos negativos. Valores do trabalho de prestígio repercutem positivamente sobre afetos positivos. Valores de estabilidade repercutem negativamente sobre satisfação com a vida e sobre afetos positivos; e positivamente sobre afetos negativos. Os resultados deste estudo mostraram que o estado otimista é um poderoso fator de impacto positivo sobre o estado de saúde denominado bem estar subjetivo.(AU)

The role of the 8-18 helix of CGRP 8-37 in mediating high affinity binding to CGRP receptors; coulombic and steric interactions

1. The role of individual residues in the 8-18 helix of CGRP 8-37 in promoting high-affinity binding to CGRP 1 receptors expressed on rat L6 and human SK-N-MC cells has been examined. The relative potencies of various derivatives were estimated from their ability to inhibit the human αCGRP-mediated increase in cyclic AMP production and the binding of [ 125I]-human αCGRP. 3. Arg 11 and Arg 18 were replaced by serines to give [Ser 11.18]CGRP 8-37. These bound with pKi values <6 to SK-N-MC cells and had apparent pA 2 values of 5.81 ± 0.04 and 5.31 ± 0.11 on SK-N-MC and L6 cells. CGRP 8-37 had a pKi of 8.22 on SK-N-MC cells and pK b values on the above cell lines of 8.95±0.04 and 8.76±0.04. 3. The arginines were replaced with glutamic acid residues. [Glu 11]CGRP 8-37 had a pK b of 7.14±0.14 on SK-N-MC cells (pKi=7.05±0.05) and 6.99±0.08 on L6 cells. [Glu 18]CGRP 8-37 had a pK b of 7.10±0.0.08 on SK-N-MC cells (pKi=6.91±0.23) and 7.12±0.09 on L6 cells. 4. Leu 12, Leu 15 and Leu 16 were replaced by benzoyl-phenylalanine (bpa) residues. On SK-N-MC cells, the apparent pA 2 values of [bpa 12]-, [bpa 15]- and [bpa 16]CGRP 8-37 were respectively 7.43±0.23, 8.34±0.11 and 5.66±0.16 (pKi values of 7.14±0.17, 7.66±0.21 and <6): on L6 cells they were 7.96±0.36, 8.28±0.21 and 6.09±0.04 (all n=3). 5. It is concluded that the Arg 11 and Arg 18 are involved in specific electrostatic interactions with other residues, either on the CGRP 1 receptors or elsewhere on CGRP 8-37. Leu 16 is in a conformationally restricted site when CGRP 8-37 binds to CGRP 1 receptors, unlike Leu 12 and Leu 15.

Good practice guide in learning and teaching

Once again this publication is produced to celebrate and promote good teaching and learning support and to offer encouragement to those imaginative and innovative staff who continue to wish to challenge students to learn to maximum effect. It is hoped that others will pick up some good ideas from the articles contained in this volume. We have again changed our approach for this 2006/07 edition (our fourth) of the Aston Business School Good Practice Guide. As before, some contributions were selected from those identifying interesting best practice on their Annual Module reflection forms in 2005/2006. Other contributors received HELM (Research Centre in Higher Education Learning and Management) small research grants in 2005/2006. Part of the conditions were for them to write an article for this publication. We have also been less tight on the length of the articles this year. Some contributions are, therefore, on the way to being journal articles. HELM will be working with these authors to help develop these for publication. The themes covered in this year?s articles are all central to the issues faced by those providing HE teaching and learning opportunities in the 21st Century. Specifically this is providing support and feedback to students in large classes, embracing new uses of technology to encourage active learning and addressing cultural issues in a diverse student population. Michael Grojean and Yves Guillaume used Blackboard™ to give a more interactive learning experience and improve feedback to students. It would be easy for other staff to adopt this approach. Patrick Tissington and Qin Zhou (HELM small research grant holders) were keen to improve the efficiency of student support, as does Roger McDermott. Celine Chew shares her action learning project, completed as part of the Aston University PG Certificate in Teaching and Learning. Her use of Blackboard™ puts emphasis on the learner having to do something to help them meet the learning outcomes. This is what learning should be like, but many of our students seem used to a more passive learning experience, so much needs to be done on changing expectations and cultures about learning. Regina Herzfeldt also looks at cultures. She was awarded a HELM small research grant and carried out some significant new research on cultural diversity in ABS and what it means for developing teaching methods. Her results fit in with what many of us are experiencing in practice. Gina leaves us with some challenges for the future. Her paper certainly needs to be published. This volume finishes with Stuart Cooper and Matt Davies reflecting on how to keep students busy in lectures and Pavel Albores working with students on podcasting. Pavel?s work, which was the result of another HELM small research grant, will also be prepared for publication as a journal article. The students learnt more from this work that any formal lecture and Pavel will be using the approach again this year. Some staff have been awarded HELM small research grants in 2006/07 and these will be published in the next Good Practice Guide. In the second volume we mentioned the launch of the School?s Research Centre in Higher Education Learning and Management (HELM). Since then HELM has stimulated a lot of activity across the School (and University) particularly linking research and teaching. A list of the HELM seminars for 2006/2007 is listed as Appendix 1 of this publication. Further details can be obtained from Catherine Foster (c.s.foster@aston.ac.uk), who coordinates the HELM seminars. For 2006 and 2005 HELM listed, 20 refereed journal articles, 7 book chapters, 1 published conference papers, 20 conference presentations, two official reports, nine working papers and £71,535 of grant money produced in this research area across the School. I hope that this shows that reflection on learning is alive and well in ABS. We have also been working on a list of target journals to guide ABS staff who wish to publish in this area. These are included as Appendix 2 of this publication. May I thank the contributors for taking time out of their busy schedules to write the articles and to Julie Green, the Quality Manager, for putting the varying diverse approaches into a coherent and publishable form and for agreeing to fund the printing of this volume.

Playing catch-up with China:challenges and strategies for smaller developing countries

This paper considers how smaller developing countries can compete with China by examining the cases of two such countries; Mauritius and Morocco. In order to supplement their more traditional extractive and agro-based industries they have developed important textile and apparel sectors, supplying principally the EU. However, the textile industries in both countries have recently come under intense competitive pressure from China with its much lower production costs and huge capacity. This paper compares and contrasts the conditions under which Mauritius and Morocco have developed their textile industries as well as exploring the challenges they now face from China and the ways in which they have reacted to them. It also examines the wider industrial policy of both countries and the extent to which they have acquired the capability to meet the threats that now face them. Some specific strategies and actions are also described and evaluated with a view to providing advice and guidance for other smaller developing countries that face similar challenges in these and other industries.

The application of physiological observation methods to emotion research

Purpose - The purpose of this paper is to examine consumer emotions and the social science and observation measures that can be utilised to capture the emotional experiences of consumers. The paper is not setting out to solve the theoretical debate surrounding emotion research, rather to provide an assessment of methodological options available to researchers to aid their investigation into both the structure and content of the consumer emotional experience, acknowledging both the conscious and subconscious elements of that experience. Design/methodology/approach - A review of a wide range of prior research from the fields of marketing, consumer behaviour, psychology and neuroscience are examined to identify the different observation methods available to marketing researchers in the study of consumer emotion. This review also considers the self report measures available to researchers and identifies the main theoretical debates concerning emotion to provide a comprehensive overview of the issues surrounding the capture of emotional responses in a marketing context and to highlight the benefits that observation methods offer this area of research. Findings - This paper evaluates three observation methods and four widely used self report measures of emotion used in a marketing context. Whilst it is recognised that marketers have shown preference for the use of self report measures in prior research, mainly due to ease of implementation, it is posited that the benefits of observation methodology and the wealth of data that can be obtained using such methods can compliment prior research. In addition, the use of observation methods cannot only enhance our understanding of the consumer emotion experience but also enable us to collaborate with researchers from other fields in order to make progress in understanding emotion. Originality/value - This paper brings perspectives and methods together to provide an up to date consideration of emotion research for marketers. In order to generate valuable research in this area there is an identified need for discussion and implementation of the observation techniques available to marketing researchers working in this field. An evaluation of a variety of methods is undertaken as a point to start discussion or consideration of different observation techniques and how they can be utilised.

A genetic algorithm approach to optimising component placement and retrieval sequence for chip shooter machines

A chip shooter machine in printed circuit board (PCB) assembly has three movable mechanisms: an X-Y table carrying a PCB, a feeder carrier with several feeders holding components and a rotary turret with multiple assembly heads to pick up and place components. In order to get the minimal placement or assembly time for a PCB on the machine, all the components on the board should be placed in a perfect sequence, and the components should be set up on a right feeder, or feeders since two feeders can hold the same type of components, and additionally, the assembly head should retrieve or pick up a component from a right feeder. The entire problem is very complicated, and this paper presents a genetic algorithm approach to tackle it.

Creating demand for better health by using social marketing techniques

The most significant environmental change to support people who want to give up smoking is the legislation to ban smoking in public places. Following Scotland in March 2006, and Wales and Northern Ireland in April 2007, England moves one step closer to being smoke free on 1 July 2007, when it becomes illegal to smoke in almost every enclosed public place and workplace. Social marketing will be used to support this health promoting policy and will become more prominent in the design of health promotion campaigns of the future. Social marketing is not a new approach to promoting health but its adoption by the Government does represent a paradigm shift in the challenge to change public opinion and social norms. As a result some behaviours, like smoking or excessive alcohol consumption, will no longer be socially acceptable. The Department of Health has decided that social marketing should be used in England to guide all future health promotion efforts directed at achieving behavioural goals. This paradigm shift was announced in Chapter 2 of the “Choosing health” White Paper with its emphasis on the consumer, noting that a wide range of lifestyle choices are marketed to people, although health as a commodity itself has not been marketed. The DoH has an internal social marketing development unit to integrate social marketing principles into its work and ensure that providers deliver. The National Centre for Social Marketing has funding to provide ongoing support, to build capacity and capability in the workforce. This article describes the distinguishing features of the social marketing approach. It seeks to answer some questions. Is this really a new idea, a paradigm shift, or simply a change in terminology? What do the marketing principles offer that is new, or are they merely familiar ideas repackaged in marketing jargon? Will these principles be more effective than current health promotion practice and, if so, how does it work? Finally, what are the implications for community pharmacy?

Variations of local heat transfer coefficient in piped flow of viscous liquids

Measurements were carried out to determine local coefficients of heat transfer in short lengths of horizontal pipe, and in the region of an discontinuity in pipe diameter. Laminar, transitional and turbulent flow regimes were investigated, and mixtures of propylene glycol and water were used in the experiments to give a range of viscous fluids. Theoretical and empirical analyses were implemented to find how the fundamental mechanism of forced convection was modified by the secondary effects of free convection, temperature dependent viscosity, and viscous dissipation. From experiments with the short tube it was possible to determine simple empirical relationships describing the axial distribution of the local 1usselt number and its dependence on the Reynolds and Prandtl numbers. Small corrections were made to account for the secondary effects mentioned above. Two different entrance configurations were investigated to demonstrate how conditions upstream could influence the heat transfer coefficients measured downstream In experiments with a sudden contraction in pipe diameter the distribution of local 1u3se1t number depended on the Prandtl number of the fluid in a complicated way. Graphical data is presented describing this dependence for a range of fluids indicating how the local Nusselt number varied with the diameter-ratio. Ratios up to 3.34:1 were considered. With a sudden divergence in pipe diameter, it was possible to derive the axial distribution of the local Nusse1t number for a range of Reynolds and Prandtl numbers in a similar way to the convergence experiments. Difficulty was encountered in explaining some of the measurements obtained at low Reynolds numbers, and flow visualization techniques wore used to determine the complex flow patterns which could lead to the anomalous results mentioned. Tests were carried out with divergences up to 1:3.34 to find the way in which the local Nusselt number varied with the diameter ratio, and a few experiments were carried out with very large ratios up .to 14.4. A limited amount of theoretical analysis of the 'divergence' system was carried out to substantiate certain explanations of the heat transfer mechanisms postulated.

Gas distribution in shallow large diameter packed beds

It is important to maintain a uniform distribution of gas and liquid in large diameter packed columns to maintain mass transfer efficiency on scaling up. This work presents measurements and methods of evaluating maldistributed gas flow in packed columns. Little or no previous work has been done in this field. A gas maldistribution number, F, was defined, based on point to point velocity variations in the gas emerging from the top of packed beds. f has a minimum value for a uniformly distributed flow and much larger values for maldistributed flows. A method of testing the quality of vapour distributors is proposed, based on "the variation of f with packed height. A good gas distributor requires a short packed depth to give a good gas distribution. Measurements of gas maldistribution have shown that the principle of dynamic similarity is satisfied if two geometrically similar beds are operated at the same Reynold's number. The validity of f as a good measure of gas maldistribution, and the principle of dynamic similarity are tested statistically by Multi-Factor Analysis of the variance, and visually by the response "surfaces technique. Pressure distribution has been measured in a model of a large diameter packed bed, and shown to be associated with the velocity of the gas in a tangential feed pipe. Two simplified theoretical models are proposed to describe the flow of gases through packed beds and to support the principle of dynamic similarity. These models explain why the packed bed itself causes the flow of gas to become more uniformly distributed. A 1.2m. diameter scaled-down model was constructed geometrically similar to a 7.3m. diameter vacuum crude distillation column. The previously known internal cylinder gas distributor was tested. Three new distributors suitable for use in a large diameter column were developed and tested, these are: Internal Cylinder with Slots and Cross Baffles, Internal Cylinder with Guides in the Annulus, Internal Cylinder with Internal Cross Baffles - It has been shown that this is an excellent distributor.

Fabrication and applications of fibre Bragg gratings

The consequences of fabricating Bragg gratings in various fibres, with or without hydrogen loading, and with varying laser power levels are explored. Three new techniques for fabricating chirped gratings are presented. Beams with dissimilar wavefront curvatures are interfered to give chirped gratings. With the same aim techniques of writing gratings on tapered fibres and on deformed fibres are also covered. With these techniques, a wide variety of gratings has been fabricated from the 'superbroad' (with bandwidths of up to 180 nm), small to medium bandwidth gratings with linear chirp profiles and quadratic chirped gratings. It is demonstrated that chirped grating can be concatenated to form all-fibre Fabry-Perot and Moiré resonators. These are further concatenated with chirped gratings to produce filters with narrow passbands and very broad stopbands. A number of other applications are also addressed. The use of chirped fibre gratings for dispersion compensation and femtosecond chirped pulse amplification is demonstrated. Chirped gratings are used as dispersive elements in modelocked fibre lasers producing ultrashort pulses. A chirped fibre grating Fabry-Perot transmission filter is used in a continuous wave laser that exhibits eleven simultaneously lasing wavelengths. Finally, the use of grating-coupler devices as variable reflectivity mirrors for laser optimisation and gain clamping is considered.

A comparison of integrated biomass to electricity systems

This thesis presents a comparison of integrated biomass to electricity systems on the basis of their efficiency, capital cost and electricity production cost. Four systems are evaluated: combustion to raise steam for a steam cycle; atmospheric gasification to produce fuel gas for a dual fuel diesel engine; pressurised gasification to produce fuel gas for a gas turbine combined cycle; and fast pyrolysis to produce pyrolysis liquid for a dual fuel diesel engine. The feedstock in all cases is wood in chipped form. This is the first time that all three thermochemical conversion technologies have been compared in a single, consistent evaluation.The systems have been modelled from the transportation of the wood chips through pretreatment, thermochemical conversion and electricity generation. Equipment requirements during pretreatment are comprehensively modelled and include reception, storage, drying and communication. The de-coupling of the fast pyrolysis system is examined, where the fast pyrolysis and engine stages are carried out at separate locations. Relationships are also included to allow learning effects to be studied. The modelling is achieved through the use of multiple spreadsheets where each spreadsheet models part of the system in isolation and the spreadsheets are combined to give the cost and performance of a whole system.The use of the models has shown that on current costs the combustion system remains the most cost-effective generating route, despite its low efficiency. The novel systems only produce lower cost electricity if learning effects are included, implying that some sort of subsidy will be required during the early development of the gasification and fast pyrolysis systems to make them competitive with the established combustion approach. The use of decoupling in fast pyrolysis systems is a useful way of reducing system costs if electricity is required at several sites because• a single pyrolysis site can be used to supply all the generators, offering economies of scale at the conversion step. Overall, costs are much higher than conventional electricity generating costs for fossil fuels, due mainly to the small scales used. Biomass to electricity opportunities remain restricted to niche markets where electricity prices are high or feed costs are very low. It is highly recommended that further work examines possibilities for combined beat and power which is suitable for small scale systems and could increase revenues that could reduce electricity prices.

NMR spectroscopy in the presence of ultrasound and other perturbations

The work described in this thesis has been concerned with exploring the potential uses of ultrasound in Nuclear Magnetic Resonance (NMR) spectroscopy, The NMR spectra of liquids provide detailed structural information that may be deduced from the chemical shifts and spin-spin coupling, that are evident in the narrow resonances, arising from some of the nuclear broadening interactions being reduced to zero. In the solid state, all of the nuclear broadening interactions are present and broad lines in the NMR spectrum are observed. Current techniques employed to reduce the line widths in solids are based on coherent averaging techniques such as MAS NMR1,2 which can remove first order interactions. Recently DOR3 and DAS4 have become available to remove higher order interactions. SINNMR (Sonically Induced Narrowing of the NMR spectra of solids) has been reported by Homer et al5 and developed by Homer and Howard6 to reduce the line widths of solids. The basis of their work is the proposal that a colloidal suspension of solid particles can be made to move like large molecules by using ultrasonic agitation. The advantage of the technique is that the particles move incoherently removing all of the nuclear interactions responsible for broad lines. This thesis describes work on the extension of SINNMR by showing that the line width of 27AI and 11B for the glass Na20/B203/AI203 can be reduced by placing solid particles in a colloidal suspension. Further line width reduction is possible by applying ultrasound, at 2 MHz, of sufficient intensity. It is proposed that a cavitation field is responsible for imparting sufficient rotational motion to the solid particles to partially average the nuclear interactions responsible for broad lines. Rapid stirring of the colloidal suspension generates turbulent flow, however, the motion is insufficient to narrow the line widths for 27AI in the glass. Investigations of sonochemical reactions for in situ rate measurements by NMR have been made. 8y using the Weissler reaction7, it has been shown that ultrasonic cavitation is possible up to 10MHz. Preliminary studies have been carried out into the rate of ultrasonic polymerisation of methylmethacrylate by NMR. Long range order in liquid crystals can imposed when they are aligned in the presence a magnetic field. The degree of alignment can be monitored by NMR using, for example a deuterated solute added to the liquid crystal8. Ultrasonic streaming can then be employed to deflect the directors of the liquid crystal from their equilibrium position, resulting in a change In the NMR spectrum. The angle of deflection has been found for the thermotropic liquid crystal (I35) to be ca, 35° and for the lyotropic (ZLI-1167) to be ca, 20°, Mechanical stirring can used to re- orientate the liquid crystal but was found to give a smaller deflection, In a separate study, that did not use ultrasound, it has been found that the signal to noise ratio of 13C NMR signals can be enhanced by rapidly stirring a Iiquid. Accelerating the diffusion of nuclei out of the coil region enables M0 to be re-established more rapidly than the normal relaxation process. This allows the pulse repetition rate to be reduced without saturating the spin system. The influence of varying the relaxation delay, acquisition time and inter-pulse delay have been studied and parameters optimised. By studying cholesterol the technique was found to be most effective for nuclei with long relaxation times, such as quaternary carbon sites. Key Worde: NMR, Ulf.rasciund, 1,.lqi.fi!:l cryllltalt!h SCll1C1otlemlstryl I!r1hano~d algnflllf

Politics as text and talk:analytic approaches to political discourse

Human beings are political animals. They are also articulate mammals. How are these two aspects linked? This is a question that is only beginning to be explored. The present collection makes a contribution to the investigations into the use of language in those situations which, informally and intuitively, we call ‘political’. Such an approach is revealing not only for politics itself but also for the human language capacity. Each chapter outlines a particular method or analytic approach and illustrates its application to a contemporary political issue, institution or mode of political behaviour. As a whole, the collection aims to give a sample of current research in the field. It will interest those who are beginning to carry the research paradigm forward, as well as provide an introduction for newcomers, whether they come from neighbouring or remote disciplines or from none.

Microspheres as a vehicle for biomolecule delivery to neural stem cells

Neural stem cells (NSC) are a valuable model system for understanding the intrinsic and extrinsic controls for self-renewal and differentiation choice. They also offer a platform for drug screening and neurotoxicity studies, and hold promise for cell replacement therapies for the treatment of neurodegenerative diseases. Fully exploiting the potential of this experimental tool often requires the manipulation of intrinsic cues of interest using transfection methods, to which NSC are relatively resistant. In this paper, we show that mouse and human NSC readily take up polystyrene-based microspheres which can be loaded with a range of chemical or biological cargoes. This uptake can take place in the undifferentiated stage without affecting NSC proliferation and their capacity to give rise to neurons and glia. We demonstrate that ß-galactosidase-loaded microspheres could be efficiently introduced into NSC with no apparent toxic effect, thus providing proof-of-concept for the use of microspheres as an alternative biomolecule delivery system.

Waste to power

ABSTRACT: There has been a growing trend towards the use of biomass as a primary energy source, which now contributes over 54% of the European pulp and paper industry energy needs [1]. The remaining part comes from natural gas, which to a large extent serves as the major source of energy for numerous recovered fiber paper mills located in regions with limited available forest resources. The cost of producing electricity to drive paper machinery and generate heat for steam is increasing as world demand for fossil fuels increases. Additionally, recovered fiber paper mills are also significant producers of fibrous sludge and reject waste material that can contain high amounts of useful energy. Currently, a majority of these waste fractions is disposed of by landspreading, incineration, or landfill. Paper mills must also pay a gate fee to process their waste streams in this way and the result of this is a further increase in operating costs. This work has developed methods to utilize the waste fractions produced at recovered fiber paper mills for the onsite production of combined heat and power (CHP) using advanced thermal conversion methods (pyrolysis and gasification) that are well suited to relatively small scales of throughput. The electrical power created would either be used onsite to power the paper making process or alternatively exported to the national grid, and the surplus heat created could also be used onsite or exported to a local customer. The focus of this paper is to give a general overview of the project progress so far and will present the experimental results of the most successful thermal conversion trials carried out by this work to date. Application: The research provides both paper mills and energy providers with methodologies to condition their waste materials for conversion into useful energy. The research also opens up new markets for gasifier and pyrolysis equipment manufacturers and suppliers.