Global Bioethics and Cultural Anthropology

Análisis del Protocolo de 1995 sobre reclamaciones colectivas como instrumento quasijurisdiccional de control sobre el cumplimiento de la Carta Social Europea.

Bioética intercultural para la salud global

Hoy las enfermedades no tienen fronteras,por lo tanto no pueden ser concebidas en términos locales, sino como problemas conectados con la pobreza y la marginalidad en todos los países del mundo. Esta consideración de la salud global e integral obliga, por una parte, a detectar los impedimentos que dificultan crear condiciones de salud mundial y, por otra parte, buscar las vías y diseñar las estrategias necesariaspara superar los obstáculos y alcanzar las cotas de salud que se entiende constituyen la calidad de vida.

Global Bioethics and Cultural Anthropology

Análisis del Protocolo de 1995 sobre reclamaciones colectivas como instrumento quasijurisdiccional de control sobre el cumplimiento de la Carta Social Europea.

The global report of trafficking in persons: analysis and results

L'Oficina de les Nacions Unides contra la Droga i el Delicte en el seu informe "Global Report on Trafficking in Persons" de 2012 recull que "l'explotació sexual és, amb gran diferència, la forma de tràfic de persones detectades amb més freqüència, concretament en xifres un total del 79 % dels casos. Enllaç a l'informe sencer: http://www.unodc.org/documents/data-and-analysis/glotip/Trafficking_in_Persons_2012_web.pdf

Short- and long-term changes in chromosomal inversion polymorphism and global warming: Drosophila subobscura from the Balkans

The chromosomal inversion polymorphism of Drosophila subobscura is adaptive to environmental changes. The population of Petnica, Serbia, was chosen to analyze short- and long-term changes in this polymorphism. Short-term changes were studied in the samples collected in May, June, and August of 1995. The inversion polymorphism varied over these months, although various interpretations are possible. To analyze long-term changes, samples obtained in May 1995 and May 2010 were compared. The frequency of the 'cold' adapted inversions (Ast, Jst, Ust, Est, and Ost) decreased and that of the 'warm' adapted inversions (A2, J1, U1+2, and O3+4) increased, from 1995 to 2010. These changes are consistent with the general increase in temperature recorded in Petnica for the same period. Finally, the possible response of chromosomal polymorphism to global warming was analyzed at the regional level (Balkan peninsula). This polymorphism depends on the ecological conditions of the populations, and the changes observed appear to be consistent with global warming expectations. Natural selection seems to be the main mechanism responsible for the evolution of this chromosomal polymorphism.

Short- and long-term changes in chromosomal inversion polymorphism and global warming: Drosophila subobscura from the Balkans

The chromosomal inversion polymorphism of Drosophila subobscura is adaptive to environmental changes. The population of Petnica, Serbia, was chosen to analyze short- and long-term changes in this polymorphism. Short-term changes were studied in the samples collected in May, June, and August of 1995. The inversion polymorphism varied over these months, although various interpretations are possible. To analyze long-term changes, samples obtained in May 1995 and May 2010 were compared. The frequency of the 'cold' adapted inversions (Ast, Jst, Ust, Est, and Ost) decreased and that of the 'warm' adapted inversions (A2, J1, U1+2, and O3+4) increased, from 1995 to 2010. These changes are consistent with the general increase in temperature recorded in Petnica for the same period. Finally, the possible response of chromosomal polymorphism to global warming was analyzed at the regional level (Balkan peninsula). This polymorphism depends on the ecological conditions of the populations, and the changes observed appear to be consistent with global warming expectations. Natural selection seems to be the main mechanism responsible for the evolution of this chromosomal polymorphism.

Effects of Road Construction Intensity and Operations on Rural Freeway Work Zone Capacity, TPF-5(081), 2014

Capacity is affected by construction type and its intensity on adjacent open traffic lanes. The effect on capacity is a function of vehicles moving in and out of the closed lanes of the work zone, and the presence of heavy construction vehicles. Construction activity and its intensity, however, are not commonly considered in estimating capacity of a highway lane. The main purpose of this project was to attempt to quantify the effects of construction type and intensity (e.g. maintenance, rehabilitation, reconstruction, and milling) on work zone capacity. The objective of this project is to quantify the effects of construction type and its intensity on work zone capacity and to develop guidelines for MoDOT to estimate the specific operation type and intensity that will improve the traffic flow by reducing the traffic flow and queue length commonly associated with work zones. Despite the effort put into field data collection, the data collected did not show a full speed-flow chart therefore extracting a reliable capacity value was difficult. A statistical comparison between the capacity values found in this study using either methodologies indicates that there is an effect of construction activity on the values work zone capacity. It was found that the heavy construction activity reduces the capacity. It is very beneficial to conduct similar studies on the capacity of work zone with different lane closure barriers, which is also directly related to the type of work zone being short-term or long-term work zones. Also, the effect of different geometric and environmental characteristics of the roadway should be considered in future studies.

Vanishing Clams on an iberian beach: local consequences and global implication of accelerating loss of shells to tourism

Multi-decadal increase in shell removal by tourists, a process that may accelerate degradation of natural habitats, was quantified via two series of monthly surveys, conducted thirty years apart (1978-1981 and 2008-2010) in one small embayment on the Mediterranean coast of Spain. Over the last three decades, the local tourist arrivals have increased almost three-fold (2.74), while the area has remained unaffected by urban encroachment and commercial fisheries. Concomitantly, abundance of mollusk shells along the shoreline decreased almost three-fold (2.62) and displayed a tight inverse correlation with tourist arrivals. A four-fold increase in tourist arrivals observed globally over the last 30 years has likely induced a comparable worldwide acceleration in shell removal from marine shorelines and exerted multiple negative (but currently unquantifiable) habitat changes that may include increased beach erosion, changes in carbon and calcium cycles, and decline in diversity and abundance of organisms dependent on shell availability.

Ajustes de funções de distribuição de probabilidade à radiação solar global no Estado do Rio Grande do Sul

O objetivo deste trabalho foi verificar o ajuste das séries de dados de radiação solar global média decendial, de 22 municípios do Estado do Rio Grande do Sul, às funções de distribuições de probabilidade normal, log-normal, gama, gumbel e weibull. Aplicou-se o teste de aderência de Kolmogorov-Smirnov, nas 792 séries de dados (22 municípios x 36 decêndios) de radiação solar global média decendial, para verificar o ajuste dos dados às distribuições normal, log-normal, gama, gumbel e weibull, totalizando 3.960 testes. Os dados decendiais de radiação solar global média se ajustam às funções de distribuições de probabilidade normal, log-normal, gama, gumbel e weibull, e apresentam melhor ajuste à função de distribuição de probabilidade normal.

The global activator GacA of Pseudomonas aeruginosa PAO positively controls the production of the autoinducer N-butyryl-homoserine lactone and the formation of the virulence factors pyocyanin, cyanide, and lipase.

The global activator GacA, a highly conserved response regulator in Gram-negative bacteria, is required for the production of exoenzymes and secondary metabolites in Pseudomonas spp. The gacA gene of Pseudomonas aeruginosa PAO1 was isolated and its role in cell-density-dependent gene expression was characterized. Mutational inactivation of gacA resulted in delayed and reduced formation of the cell-density signal N-butyryl-L-homoserine lactone (BHL), of the cognate transcriptional activator RhIR (VsmR), and of the transcriptional activator LasR, which is known to positively regulate RhIR expression. Amplification of gacA on a multicopy plasmid caused precocious and enhanced production of BHL, RhIR and LasR. In parallel, the gacA gene dosage markedly influenced the BHL/RhIR-dependent formation of the cytotoxic compounds pyocyanin and cyanide and the exoenzyme lipase. However, the concentrations of another known cell-density signal of P. aeruginosa, N-oxododecanoyl-L-homoserine lactone, did not always match BHL concentrations. A model accounting for these observations places GacA function upstream of LasR and RhIR in the complex, cell-density-dependent signal-transduction pathway regulating several exoproducts and virulence factors of P. aeruginosa via BHL.

Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

Impacte d'un programa d'activitat física basat en el mètode Klapp i Stretching Global Actiu sobre la postura de persones adultes amb escoliosi idiopàtica

La simetria entre espatlles i l’alçada de les dues crestes ilíaques es perd quan es pateix escoliosi. Aquest empitjorament de la bona postura té conseqüències negatives per a la salut, especialment en el sistema musculoesquelètic. L’objecte principal d’aquest treball és avaluar l’impacte d’un programa d’activitat física basat en la combinació dels mètodes “Klapp” i l’“Stretching Global Actiu” sobre la postura en bipedestació de persones adultes que pateixen escoliosi idiopàtica. L’aplicació d’ambdós mètodes de forma individual no obtenen millores en aquests paràmetres en persones adultes, però en canvi en nens i nenes sí. El treball és un estudi experimental en el qual es va assignar un subjecte al grup intervenció i un subjecte al grup control. El subjecte del grup intervenció va realitzar un programa de 20 sessions de 45 – 60 minuts de treball amb aquests dos mètodes de treball físic. El subjecte del grup control va seguir la seva activitat habitual. Abans i després de la intervenció, es varen mesurar les variables dependents principals i secundaries respectivament. Els resultats obtinguts han revelat una petita millora en la simetria de les espatlles (+0,2 cms.) en el grup intervenció però no en la simetria de l’altura de les crestes ilíaques. El grup control no ha presentat canvis. Per tant, podem dir que és útil utilitzar la combinació dels dos mètodes físics per a millorar la postura en persones adultes que pateixen escoliosi idiopàtica.

Effect of Video Camera-Based Remote Roadway Condition Monitoring on Snow Removal-Related Maintenance Operations. 2014

Remote monitoring through the use of cameras is widely utilized for traffic operation, but has not been utilized widely for roadway maintenance operations. The Utah Department of Transportation (UDOT) has implemented a new remote monitoring system, referred to as a Cloud-enabled Remote Video Streaming (CRVS) camera system for snow removal-related maintenance operations in the winter. The purpose of this study was to evaluate the effectiveness of the use of the CRVS camera system in snow removal-related maintenance operations. This study was conducted in two parts: opinion surveys of maintenance station supervisors and an analysis on snow removal-related maintenance costs. The responses to the opinion surveys mostly displayed positive reviews of the use of the CRVS cameras. On a scale of 1 (least effective) to 5 (most effective), the average overall effectiveness given by the station supervisors was 4.3. An expedition trip for this study was defined as a trip that was made to just check the roadways if snow-removal was necessary. The average of the responses received from surveys was calculated to be a 33 percent reduction in expedition trips. For the second part of this study, an analysis was performed on the snow removal-related maintenance cost data provided by UDOT to see if the installation of a CRVS camera had an effect in reducing expedition trips. This expedition cost comparison was performed for 10 sets of maintenance stations within Utah. It was difficult to make any definitive inferences from the comparison of expedition costs over the years for which precipitation and expedition cost data were available; hence a statistical analysis was performed using the Mixed Model ANOVA. This analysis resulted in an average of 14 percent higher ratio of expedition costs at maintenance stations with a CRVS camera before the installation of the camera compared to the ratio of expedition costs after the installation of the camera. This difference was not proven to be statistically significant at the 95 percent confident level, but indicated that the installation of CRVS cameras was on the average helpful in reducing expedition costs and may be considered practically significant. It is recommended that more detailed and consistent maintenance cost records be prepared for accurate analysis of cost records for this type of study in the future.