Effects of Gear Modifications on the Trawl Performance and Catching Efficiency of the West Coast Upper Continental Slope Groundfish Survey Trawl

Since 1984, annual bottom trawl surveys of the west coast (California–Washington) upper continental slope (WCUCS) have provided information on the abundance, distribution, and biological characteristics of groundfish resources. Slope species of the deep-water complex (DWC) are of particular importance and include Dover sole, Microstomus pacificus; sablefish, Anoplopoma fimbria; shortspine thornyhead, Sebastolobus alascanus; and longspine thornyhead, S. altivelis. In the fall of 1994, we conducted an experimental gear research cruise in lieu of our normal survey because of concerns about the performance of the survey trawl. The experiment was conducted on a soft mud bottom at depths of 460–490 m off the central Oregon coast. Treatments included different combinations of door-bridle rigging, groundgear weight, and scope length. The experimental design was a 2 ´ 2 ´ 2 factorial within a randomized complete-block. Analysis of variance was used to examine the effects of gear modifications on the engineering performance of the trawl (i.e. trawl dimensions, variation in trawl dimensions, and door attitude) and to determine if catch rates in terms of weight and number of DWC species and invertebrates were affected by the gear modifications. Trawl performance was highly variable for the historically used standard trawl configuration. Improvements were observed with the addition of either a 2-bridle door or lighter ground gear. Changes in scope length had relatively little effect on trawl performance. The interaction of door bridle and ground gear weight had the most effect on trawl performance. In spite of the standard trawl’s erratic performance, catch rates of all four DWC species and invertebrates were not significantly different than the 2-bridle/heavy combination, which did the best in terms of engineering performance. The most important factor affecting DWC catch rates was ground gear. Scope length and the type of door bridle had little effect on DWC catch rates. Subsequent revisions to survey gear and towing protocol and their impact on the continuity of the slope survey time series are discussed.

Emprego da energia solar para pré-aquecimento de água de reposição de caldeira.

Apresenta-se uma avaliação técnico-econômica para o préaquecimento solar da água de reposição em caldeiras de sistemas de vapor abertos. São empregados, para compor um estudo de caso, os dados de uma indústria de laticínios de médio porte situada próximo da cidade do Rio de Janeiro. Quarenta e oito simulações computacionais do sistema de aquecimento solar (SAS) foram realizadas em TRNSYS, correspondendo aos 5% melhores resultados econômicos de uma série de 2.700 simulações mais simples (método φ-f-chart), programados em MATLAB. Foram empregados dados horários de ano típico meteorológico (TMY) para a cidade do Rio de Janeiro. O ganho econômico foi baseado no consumo evitado dos três combustíveis mais comuns na indústria de laticínios, enquanto o custo de investimento foi composto a partir de valores comerciais e da literatura. Os resultados da avaliação econômica mostraram-se desfavoráveis para a substituição de óleo combustível, favoráveis no caso de caldeiras a gás natural, condicionado a existência de subsídios, e bem competitivos para a substituição de GLP. A eficiência térmica do sistema mostrou ser o parâmetro técnico chave para o desempenho econômico, consequentemente, uma vez que a eficiência se mostrou inversamente proporcional tanto ao volume do reservatório quanto à área de coletores, não há uma configuração ótima para o sistema. Não obstante, os resultados permitiram a proposição de políticas públicas para incentivar o uso da energia solar na indústria leiteira e, consequentemente, contribuir para a preservação ambiental.

Increasing Creel Interview Efficiency Through Early Survey Termination

Operational modifications based on recreational angler activity patterns can be successfully formulated to increase creel survey efficiency without a significant loss of information. This study was conducted to estimate the amount of Texas marine sport-boat angler interview and retained fish data (bay and Gulf) that would be missed both coastwide and within each bay system if surveys were terminated early when no angler interviews were conducted by a specified time. Using this method, <3 percent of the total interviews and retained fish would be missed coastwide by terminating surveys at 1400 hours on weekends and 1600 hours on weekdays throughout the survey year. This would result in the early termination of 14 percent of the weekend surveys and 23 percent of the weekday surveys, thus allowing an annual redirection of 440 work-hours and $6,063 in operating expenses.

Technical efficiency in artisanal fisheries (AF) in Badagry local government area of Lagos State, Nigeria

This study examined the technical efficiency in artisanal fisheries in Lagos State of Nigeria. The study employed a two stage random sampling procedure for the selection of 120 respondents. The analytical techniques involved descriptive statistics and estimation of technical efficiency following maximum likelihood estimation (MLE) procedure available in FRONTIER 4.1. The MLE result of the stochastic frontier production function showed that hired labour, cost of repair and capital items are critical factors that influences productivity of artisanal fishermen with the coefficient of hired labour being highly elastic. This implies that employing more labour will significantly increase the catch in the study area. The predicted farm efficiency with an average value of 0.92 showed that there is a marginal potential of about 8 percent to increase the catch, hence the income of the fishermen. The study further examined the factors that influence productivity of fishermen in the study area. Year of education, mode of operation and frequency of fishing have important implication on the technical efficiency of fishermen in the study area.

The review of recent advances in fish genetics and biotechnology

Great advances have been, and are being made in our knowledge of the genetics and molecular biology (including genomics, proteomics and structural biology). Global molecular profiling technologies such as microassays using DNA or oligonucleotide chip, and protein and lipid chips are being developed. The application of such biotechnological advances are inevitable in aquaculture in the areas of improvement of aquaculture stocks where many molecular markers such as RFLPs, AFLDs and RAPD are now available for genome analysis, finger printing and genetic linkage mapping. Transgenic technology has been developed in a number of fish species and research is being pursed to produce transgenic fish carrying genes that encode antimicrobial peptides such as lysozyme thereby achieving disease resistance in fish. Also it is a short cut to achieving genetic change for fast growth and other desirable traits like early sexual maturity, temperature tolerance and feed conversion efficiency. KEYWORDS: Fish genetics, transgenesis, monoploidy, diploidy, polyploidy,gynogenesis, androgenesis, cryopreservation.

Análise da Eficiência de Nitrificação em Reatores Biológicos de Leito Móvel (MBBR) em escala de bancada utilizando efluente de Refinaria de Petróleo.

As atividades industriais petroquímicas, incluindo as refinarias de petróleo, são grandes consumidoras de água e, consequentemente, grandes geradoras de efluentes industriais contendo uma infinidade de contaminantes. No caso das refinarias de petróleo brasileiras, o nitrogênio amoniacal tem se tornado um componente crítico a ser tratado, o que tem sido feito através de processos de tratamento biológicos que utilizam a nitrificação como base. Neste trabalho, foi avaliada a operação de um reator de leito móvel (MBBR), em escala de bancada, utilizando suportes de polietileno com área específica de 820 m2.m-3, para tratar um efluente proveniente de uma refinaria brasileira com alta concentração de nitrogênio amoniacal. O efluente bruto apresentou demanda química de oxigênio entre 100 e 300 mg.L-1, teores de nitrogênio amoniacal entre 60 e 90 mg.L-1 e condutividade elétrica entre 1 e 2 mS.cm-1. Mesmo com variações da qualidade da alimentação da planta ao longo do estudo, como o aumento das concentrações de contaminantes, incluindo inibidores da nitrificação típicos dos efluentes de refinaria, a planta atendeu à Resolução CONAMA 430/2011 (BRASIL, 2011), que limita a concentração de descarte em 20 mg.L-1 para o contaminante nitrogênio amoniacal, em 93% das medições. Para o caso de uma fictícia legislação mais restritiva, que exigisse limite de 5 mg.L-1 desse contaminante, houve sucesso no tratamento em 83% do tempo, com eficiência média de nitrificação de 93,1%, evidenciando que há uma possibilidade real de utilização do processo MBBR em refinarias brasileiras.

Improving aquaculture feed in Bangladesh: From feed ingredients to farmer profit to safe consumption

Use of manufactured feeds in aquaculture in Bangladesh has grown rapidly over the last five years. More than 1 million tonnes of commercially formulated feeds and 0.3-0.4 million tonnes of farm-made feeds were produced in 2012, and sectoral growth is projected to increase substantially over the medium term. This working paper summarizes findings from a study, conducted as part of the WorldFish/USAID “Feed the Future-Aquaculture” project in 2012, assessing the current status of the aquaculture feed sector in Bangladesh. Fish feed value chains, market trends, ingredients and formulation systems, farm feeding practices, ancillary services and feed regulations were investigated. The study identifies a number of entry points for interventions in the sector, and investments which would improve feed quality and farmer access to better feeds and support the growth of sustainable aquaculture.