Radiation properties of coil-coated steel in building envelope surfaces and the influence on building thermal performance

Recent studies have shown that the optical properties of building exterior surfaces are important in terms of energy use and thermal comfort. While the majority of the studies are related to exterior surfaces, the radiation properties of interior surfaces are less thoroughly investigated. Development in the coil-coating industries has now made it possible to allocate different optical properties for both exterior and interior surfaces of steel-clad buildings. The aim of this thesis is to investigate the influence of surface radiation properties with the focus on the thermal emittance of the interior surfaces, the modeling approaches and their consequences in the context of the building energy performance and indoor thermal environment. The study consists of both numerical and experimental investigations. The experimental investigations include parallel field measurements on three similar test cabins with different interior and exterior surface radiation properties in Borlänge, Sweden, and two ice rink arenas with normal and low emissive ceiling in Luleå, Sweden. The numerical methods include comparative simulations by the use of dynamic heat flux models, Building Energy Simulation (BES), Computational Fluid Dynamics (CFD) and a coupled model for BES and CFD. Several parametric studies and thermal performance analyses were carried out in combination with the different numerical methods. The parallel field measurements on the test cabins include the air, surface and radiation temperatures and energy use during passive and active (heating and cooling) measurements. Both measurement and comparative simulation results indicate an improvement in the indoor thermal environment when the interior surfaces have low emittance. In the ice rink arenas, surface and radiation temperature measurements indicate a considerable reduction in the ceiling-to-ice radiation by the use of low emittance surfaces, in agreement with a ceiling-toice radiation model using schematic dynamic heat flux calculations. The measurements in the test cabins indicate that the use of low emittance surfaces can increase the vertical indoor air temperature gradients depending on the time of day and outdoor conditions. This is in agreement with the transient CFD simulations having the boundary condition assigned on the exterior surfaces. The sensitivity analyses have been performed under different outdoor conditions and surface thermal radiation properties. The spatially resolved simulations indicate an increase in the air and surface temperature gradients by the use of low emittance coatings. This can allow for lower air temperature at the occupied zone during the summer. The combined effect of interior and exterior reflective coatings in terms of energy use has been investigated by the use of building energy simulation for different climates and internal heat loads. The results indicate possible energy savings by the smart choice of optical properties on interior and exterior surfaces of the building. Overall, it is concluded that the interior reflective coatings can contribute to building energy savings and improvement of the indoor thermal environment. This can be numerically investigated by the choice of appropriate models with respect to the level of detail and computational load. This thesis includes comparative simulations at different levels of detail.

Modernist Success in a Postmodern Failure: Jackson Pollock and Abstract Expressionism, the Avant-Garde and the Ascension of Late Capitalism, Art after 1945

It is hard to imagine the magnitude of the events at the end of World War II. The thought produced in the face of a myriad of deaths is almost unfeasible sixty years after the fact, but the energy was integral to the changing social landscape. Because of the country's prominence in and fortitude after the war, the U.S. was left responsible for reshaping and rejuvenating the international landscape that was destroyed by the years of brutal fighting and vile contestation. The American establishment was granted a major opportunity to establish itself amongst the global leaders. Such a grand responsibility must account for the multiplicity of thought that arises in such a decisive moment. In order to align the Abstract Expressionist art movement with the intersection of the intense, multifaceted thought developed during the postwar period, the following will discuss the political, philosophical, economic, and art historical overlap that occurred in the mid to late 1940s in the hopes of illustrating the fertility yet lingering problems associated with the restructuring of the world with America at the helm. In this way, the duration of the Abstract Expressionist moment will be better understood for both its triumphs and downfalls.

Teoremas de envelope de Milgrom e Segal : uma aplicação a desenho de mecanismo

Este trabalho estuda a teoria de desenho de mecanismo. Desenho de mecanismo passou a fazer parte da teoria econômica à partir da década de 60. Seu desenvolvimento deve-se, em grande parte aos trabalhos de Vickrey, Clarke e Groves relacionados a problemas de incentivo. Esta dissertação apresenta os principais desenvolvimentos teóricos na área de desenho de mecanismo, destacando a importância dos conhecidos teoremas de envelope para estes problemas. É apresentada também uma nova versão do teorema de envelope desenvolvida por Milgrom e Segal que pode amplamente ser empregada em problemas de desenho de mecanismos. Essa nova versão do teorema de envelope de Milgron e Segal permite relaxar algumas hipóteses restritivas da teoria de desenho de mecanismos, permitindo obter novos resultados e explorar aqueles já estabelecidos, principalmente em problemas relacionados a desenhos de leilões.

Entrepreneurship failure: is culture to blame?

Apesar de Empreendedorismo e Cultura serem tópicos com extensa literatura na área de estudos de Administração de Empresas, existe relativamente pouca pesquisa na influencia que a Cultura exerce no Empreendedorismo. O principal objetivo deste trabalho é investigar a influencia da cultura no índice de fracasso do empreendedorismo. Através de uma abordagem de correlação, utilizando 40 países da database do Hofstede (2001) de trabalhadores da IBM e dados presentes na database do Global Entrepreneurship Monitor (GEM). Os resultados desta análise sugerem que Individualismo VS. Coletivismo é a única dimensão cultural significativa quando se discute os efeitos da cultura no índice de fracasso do Empreendedorismo.

Resistência ao cisalhamento de solos não saturados : análise experimental e teórica

Um equipamento triaxial convencional originalmente utilizado para ensaios em amostras de solos saturados saturada foi modificado para que fosse possível a realização de ensaios triaxiais em solos não saturados. As principais modificações foram a instalação de uma pedra cerâmica de alto valor de entrada de ar (300 kPa) na nova base da câmara triaxial e uma nova linha de aplicação de pressão para aplicação de pressão de ar na amostra. A técnica de translação de eixos é utilizada para evitar cavitação no sistema de aplicação de pressão. O solo estudado nesta pesquisa consiste de um colúvio de arenito localizado nas encostas da Formação Serra Geral, entre os municípios de Timbé do Sul (SC) e São José dos Ausentes (RS). Ensaios triaxiais convencionais foram realizados nas condições drenado e não drenado em amostras indeformadas para tensões de confinamento iniciais variando de 50 até 500 kPa; ensaios triaxiais convencionais foram realizados na condição drenada em amostras remoldadas para as tensões de confinamento iniciais de 50, 100 e 200kPa. Ensaios triaxiais com sucção controlada foram realizados na condição drenado em amostras indeformadas para as tensões normais líquidas de 50, 100, 150 e 200 kPa em níveis de sucção variando de 25 até 150 kPa. A partir dos resultados dos ensaios triaxiais determinou-se os parâmetros de resistência ao cisalhamento: c’ – intercepto coesivo efetivo; f´ - ângulo de atrito interno efetivo; fb – ângulo de atrito interno que quantifica a contribuição da sucção na resistência ao cisalhamento. O comportamento encontrado foi de uma envoltória de resistência ao cisalhamento não saturada bilinear com acréscimo na resistência ao cisalhamento para baixos níveis de sucção até aproximadamente 75 kPa, e após um decréscimo na resistência ao cisalhamento. A tensão normal líquida não influencia no valor de fb e a sucção não provoca alteração no valor de f´. O valor de fb apresenta valores superiores ao valor de f´, quando se utiliza o critério de ruptura clássico de resistência ao cisalhamento. Alguns critérios de determinação dos valores máximos de ruptura foram aplicados para um melhor entendimento do comportamento resistente deste material.

Why merger talks collapse: an exploratory study about contributing factors to ‘wedding cold feet' and deal making failure in mergers and acquisitions from the perspective of active deal making professionals in Brazil

Why merger talks collapse: an exploratory study about contributing factors behind ‘wedding cold feet' and deal making failure in Mergers and Acquisitions from the perspective of active deal making professionals in Brazil. One basic question encouraged this study: after all the effort, expectations and money usually invested in dealmaking, why are so many transactions simply abandoned, even when the benefits are clear for the business, shareholders, customers and employees?

Co-ordination failure, moral hazard and sovereign bankruptcy procedures

We study a model of sovereign debt crisis that combines problems of creditor coordination and debtor moral hazard. Solving the sovereign debtor's incentives leads to excessive 'rollover failure' by creditors when sovereign default occurs. We discuss how the incidence of crises might be reduced by international sovereign bankruptcy procedures and relate this to the current debate on revising international financial architecture. Paper prepared for Bank of England Conference on "The Role of the Official and Private Sectors in Resolving International Financial Crises", London, and for the Latin American Meeting of the Econometric Society, Sao Paolo, Brazil. (Preliminary draft circulated for comments, please do not cite without reference to the authors).

The failure of early-stage technology startups in Brazil: a study about the contributing factors to the early-death of startups between 2009 and 2014 in Southeastern Brazil

This research aimed to find out which are the main factors that lead technology startups to fail. The study focused on companies located in the Southeast region of Brazil that operated between 2009 and 2014. In the beginning, a review of the literature was done to have a better understanding of basic concepts of entrepreneurship as well as modern techniques for developing entrepreneurship. Furthermore, an analysis of the entrepreneurial scenario in Brazil, with a focus on the Southeast, was also done. After this phase, the qualitative study began, in which 24 specialists from startups were interviewed and asked about which factors were crucial in leading a technology startup to fail. After analyzing the results, four main factors were identified and these factors were validated through a quantitative survey. A questionnaire was then formulated based on the answers from the respondents and distributed to founders and executives of startups, which both failed and succeeded. The questionnaire was answered by 56 companies and their answers were treated with the factor analysis statistical method to check the validity of the questionnaire. Finally, the logistical regression method was used to know the extent to which the factors led to the startups’ failure. In the end, the results obtained suggest that the most significant factor that leads technology startups in southeastern Brazil to fail are problems with interpersonal relationship between partners or investors.

Spawning failure in Brycon amazonicus may be associated with ovulation and not with final oocyte maturation

Avaliaram-se os possíveis mecanismos envolvidos com a falha na desova de matrinxãs (Brycon amazonicus), submetidas à indução hormonal por extrato bruto de hipófise de carpa. Para tal, após a extrusão, os ovários foram coletados e analisados histomorfometricamente. Nas fêmeas que não desovaram (FNDs), a maioria dos ovócitos vitelogênicos remanescentes nos ovários atingiu a maturação final, apresentando quebra de vesícula germinativa, mas não foram ovulados (NOs). Consequentemente, estas fêmeas apresentaram frequências mais baixas de folículos pós ovulatórios (5%) quando comparadas com a que desovou (FD) (23%). Com relação aos NOs, os valores se inverteram e a frequência destes nas FNDs (21%) foi maior do que na FD (3%). Estes dados indicam que as falhas na desova desta espécie estão provavelmente relacionadas com a ovulação, uma vez que a maturação final dos ovócitos ocorre de forma similar tanto nas FNDs como na FD. Os dados sugerem que as substâncias que promovem a ovulação, como as prostaglandinas, podem aumentar o sucesso de desova em peixes reofílicos.

Two-dimensional modeling of material failure in reinforced concrete by means of a continuum strong discontinuity approach

The paper presents a new methodology to model material failure, in two-dimensional reinforced concrete members, using the Continuum Strong Discontinuity Approach (CSDA). The mixture theory is used as the methodological approach to model reinforced concrete as a composite material, constituted by a plain concrete matrix reinforced with two embedded orthogonal long fiber bundles (rebars). Matrix failure is modeled on the basis of a continuum damage model, equipped with strain softening, whereas the rebars effects are modeled by means of phenomenological constitutive models devised to reproduce the axial non-linear behavior, as well as the bondslip and dowel effects. The proposed methodology extends the fundamental ingredients of the standard Strong Discontinuity Approach, and the embedded discontinuity finite element formulations, in homogeneous materials, to matrix/fiber composite materials, as reinforced concrete. The specific aspects of the material failure modeling for those composites are also addressed. A number of available experimental tests are reproduced in order to illustrate the feasibility of the proposed methodology. (c) 2007 Elsevier B.V. All rights reserved.

3-D reconstruction by extended depth-of-field in failure analysis - Case study II: Fractal analysis of interlaminar fracture in carbon/epoxy composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

3-D reconstruction by extended depth-of-field in failure analysis - Case study I: Qualitative fractographic investigation of fractured bolts in a partial valve

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)