Influence of increment thickness on microhardness and dentin bond strength of bulk fill resin composites

OBJECTIVES To investigate the influence of increment thickness on Vickers microhardness (HV) and shear bond strength (SBS) to dentin of a conventional and four bulk fill resin composites. METHODS HV and SBS were determined on specimens of the conventional resin composite Filtek Supreme XTE (XTE) and the bulk fill resin composites SDR (SDR), Filtek Bulk Fill (FBF), x-tra fil (XFIL), and Tetric EvoCeram Bulk Fill (TEBF) after 24h storage. HV was measured either as profiles at depths up to 6mm or at the bottom of 2mm/4mm/6mm thick resin composite specimens. SBS of 2mm/4mm/6mm thick resin composite increments was measured to dentin surfaces of extracted human molars treated with the adhesive system OptiBond FL, and the failure mode was stereomicroscopically determined at 40× magnification. HV profiles and failure modes were descriptively analysed whereas HV at the bottom of resin composite specimens and SBS were statistically analysed with nonparametric ANOVA followed by Wilcoxon rank sum tests (α=0.05). RESULTS HV profiles (medians at 2mm/4mm/6mm): XTE 105.6/88.8/38.3, SDR 34.0/35.5/36.9, FBF 36.4/38.7/37.1, XFIL 103.4/103.9/101.9, TEBF 63.5/59.7/51.9. HV at the bottom of resin composite specimens (medians at 2mm/4mm/6mm): XTE (p<0.0001) 105.5>85.5>31.1, SDR (p=0.10) 25.8=21.9=26.0, FBF (p=0.16) 26.6=25.3=28.9, XFIL (p=0.18) 110.5=107.2=101.9, TEBF (p<0.0001) 63.0>54.9>48.2. SBS (MPa, medians at 2mm/4mm/6mm): XTE (p<0.0001) 23.9>18.9=16.7, SDR (p=0.26) 24.6=22.7=23.4, FBF (p=0.11) 21.4=20.3=22.0, x-tra fil (p=0.55) 27.0=24.0=23.6, TEBF (p=0.11) 21.0=20.7=19.0. The predominant SBS failure mode was cohesive failure in dentin. SIGNIFICANCE At increasing increment thickness, HV and SBS decreased for the conventional resin composite but generally remained constant for the bulk fill resin composites.

«Gesundheitsrecht am Puls der Zeit» : Bericht zum Symposium der Privaten Universität im Fürstentum Liechtenstein vom 22. November 2013

Am 22. November 2013 führte die Private Universität im Fürstentum Liechtenstein (UFL) bereits zum vierten Mal ihr jährliches Symposium zum Gesundheitsrecht durch. Es war dem Thema «Ökonomie und Gesundheit – Was darf uns unsere Gesundheit kosten?» gewidmet. In Triesen (FL) trafen sich Fachleute aus Liechtenstein und der Schweiz, um verschiedene Facetten der Finanzierung des Gesundheitssystems interdisziplinär zu erörtern und mit einem kritischen Publikum zu diskutieren.

Ökonomie und Gesundheit: Was darf uns unsere Gesundheit kosten?

Der Sammelband ist die Frucht des von der UFL im November 2013 in Triesen FL veranstalteten Symposiums «Gesundheitsrecht am Puls der Zeit». Die Beiträge widmen sich der Gesundheitsversorgung und ihren Kosten aus dem Blickwinkel verschiedener Disziplinen. Aus der Warte von Gesundheitsökonomie, Ethik, Medizin und Recht setzen sich die Autorinnen und Autoren unter anderem mit medizinischen und pflegerischen Leistungen, dem Zugang zu teuren Medikamenten bei seltenen Krankheiten, den Folgen von krankheitsbedingten Absenzen am Arbeitsplatz und den Anreizen, denen die mit der Behandlung von kranken, behinderten und betagten Menschen beschäftigten Fachleute ausgesetzt sind, auseinander. Im Vordergrund dieser Betrachtungen zu Qualität, Fairness und Wirtschaftlichkeit des Gesundheitssystems, der Zusammenarbeit verschiedener Leistungserbringer vor, während und nach einer Behandlung im Spital sowie des betrieblichen Gesundheitsmanagements stehen Beispiele aus Liechtenstein und aus der Schweiz.

"Gesundheitsrecht am Puls der Zeit" - Die Symposien der UFL

Einleitungskapitel im Sammelband des von der Privaten Universität im Fürstentum Liechtenstein (UFL) im November 2013 in Triesen FL veranstalteten Symposiums «Gesundheitsrecht am Puls der Zeit» zum Thema "Ökonomie und Gesundheit - Was darf uns unsere Gesundheit kosten?"

BCL2 mutation spectrum in B-cell non-Hodgkin lymphomas and patterns associated with evolution of follicular lymphoma

BCL2 is a target of somatic hypermutation in t(14;18) positive and also in a small fraction of t(14;18) negative diffuse large B-cell lymphoma (DLBCL), suggesting an aberrant role of somatic hypermutation (ASHM). To elucidate the prevalence of BCL2 mutations in lymphomas other than DLBCL, we Sanger-sequenced the hypermutable region of the BCL2 gene in a panel of 69 mature B-cell lymphomas, including Richter's syndrome DLBCL, marginal-zone lymphomas, post-transplant lymphoproliferative disorders, HIV-associated and common-variable immunodeficiency-associated DLBCL, all known to harbour ASHM-dependent mutations in other genes, as well as 16 t(14,18) negative and 21 t(14;18) positive follicular lymphomas (FLs). We also investigated the pattern of BCL2 mutations in longitudinal samples from 10 FL patients relapsing to FL or transforming to DLBCL (tFL). By direct sequencing, we found clonally represented BCL2 mutations in 2/16 (13%) of t(14;18) negative FLs, 2/16 (13%) HIV-DLBCLs, 1/9 (11%) of Richter's syndrome DLBCL, 1/17 (6%) of post-transplant lymphoproliferative disorders and 1/2 (50%) common-variable immunodeficiency-associated DLBCL. The proportion of mutated cases was significantly lower than in FLs carrying the t(14;18) translocation (15/21, 71%). However, the absence of t(14;18) by FISH or PCR and the molecular features of the mutations strongly suggest that BCL2 represents an additional target of ASHM in these entities. Analysis of the BCL2 mutation pattern in clonally related FL/FL and FL/tFL samples revealed two distinct scenarios of genomic evolution: (i) direct evolution from the antecedent FL clone, with few novel clonal mutations acquired by the tFL major clone, and (ii) evolution from a common mutated long-lived progenitor cell, which subsequently acquired distinct mutations in the FL and in the relapsed or transformed counterpart. Copyright © 2014 John Wiley & Sons, Ltd.

Mus Hs 750/3 - No. 1

[Carl Oestreich]

Mus Hs 750/4 - Horn=musik : für Parsetthorn, 3 Horn, Trombone basso, Flauto ; desgleichen Trio-, Quartett

[Carl Oestreich]

Mus Hs 750/9 - Allegretto scherzando

[Carl Oestreich]

Mus Hs 771 - No 1.: während der Reise : im Auftrag S:. Ehrw:. M: v.: St. componirte ich diese zwei Lieder zum 2ten Grad um, und [unleserlich] führte selbige den 27ten August 5830 [!], zum erstenmale aus. in [Stein als ein Symbol für Freimaurerei] Socrates

[Carl Oestreich]

Cardiac-specific ablation of synapse-associated protein SAP97 in mice decreases potassium currents but not sodium current

BACKGROUND Membrane-associated guanylate kinase (MAGUK) proteins are important determinants of ion channel organization in the plasma membrane. In the heart, the MAGUK protein SAP97, encoded by the DLG1 gene, interacts with several ion channels via their PDZ domain-binding motif and regulates their function and localization. OBJECTIVE The purpose of this study was to assess in vivo the role of SAP97 in the heart by generating a genetically modified mouse model in which SAP97 is suppressed exclusively in cardiomyocytes. METHODS SAP97(fl/fl) mice were generated by inserting loxP sequences flanking exons 1-3 of the SAP97 gene. SAP97(fl/fl) mice were crossed with αMHC-Cre mice to generate αMHC-Cre/SAP97(fl/fl) mice, thus resulting in a cardiomyocyte-specific deletion of SAP97. Quantitative reverse transcriptase-polymerase chain reaction, western blots, and immunostaining were performed to measure mRNA and protein expression levels, and ion channel localization. The patch-clamp technique was used to record ion currents and action potentials. Echocardiography and surface ECGs were performed on anesthetized mice. RESULTS Action potential duration was greatly prolonged in αMHC-Cre/SAP97(fl/fl) cardiomyocytes compared to SAP97(fl/fl) controls, but maximal upstroke velocity was unchanged. This was consistent with the decreases observed in IK1, Ito, and IKur potassium currents and the absence of effect on the sodium current INa. Surface ECG revealed an increased corrected QT interval in αMHC-Cre/SAP97(fl/fl) mice. CONCLUSION These data suggest that ablation of SAP97 in the mouse heart mainly alters potassium channel function. Based on the important role of SAP97 in regulating the QT interval, DLG1 may be a susceptibility gene to be investigated in patients with congenital long QT syndrome.

The First Density Estimation of an Isolated Eurasian Lynx Population in Southwest Asia

During November 2010–February 2011, we used camera traps to estimate the population density of Eurasian lynx Lynx lynx in Ciglikara Nature Reserve, Turkey, an isolated population in southwest Asia. Lynx density was calculated through spatial capture—recapture models. In a sampling eff ort of 1093 camera trap days, we identifi ed 15 independent individuals and estimated a density of 4.20 independent lynx per 100 km2, an unreported high density for this species. Camera trap results also indicated that the lynx is likely to be preying on brown hare Lepus europaeus, which accounted for 63% of the non-target species pictured. As lagomorph populations tend to fl uctuate, the high lynx density recorded in Ciglikara may be temporary and may decline with prey fl uctuation. Therefore we recommend to survey other protected areas in southwestern Turkey where lynx is known or assumed to exist, and continuously monitor the lynx populations with reliable methods in order to understand the populations structure and dynamics, defi ne sensible measures and management plans to conserve this important species.

«Gesundheitsrecht am Puls der Zeit»: Bericht zum Symposium der Privaten Universität im Fürstentum Liechtenstein UFL vom 14. November 2014

«Arbeit und Gesundheit — (Un)gesunde Arbeitswelt?»: Am 14. November 2014 führte die Private Universität im Fürstentum Liechtenstein UFL bereits zum fünften Mal ihr jährliches Symposium «Gesundheitsrecht am Puls der Zeit» durch. In Triesen (FL) trafen sich Fachleute aus Liechtenstein und der Schweiz, um die Zusammenhänge zwischen Arbeit und Gesundheit interdisziplinär zu erörtern und mit einem kritischen Publikum zu diskutieren.

Fully automatic segmentation of AP pelvis X-rays via random forest regression with efficient feature selection and hierarchical sparse shape composition

In clinical practice, traditional X-ray radiography is widely used, and knowledge of landmarks and contours in anteroposterior (AP) pelvis X-rays is invaluable for computer aided diagnosis, hip surgery planning and image-guided interventions. This paper presents a fully automatic approach for landmark detection and shape segmentation of both pelvis and femur in conventional AP X-ray images. Our approach is based on the framework of landmark detection via Random Forest (RF) regression and shape regularization via hierarchical sparse shape composition. We propose a visual feature FL-HoG (Flexible- Level Histogram of Oriented Gradients) and a feature selection algorithm based on trace radio optimization to improve the robustness and the efficacy of RF-based landmark detection. The landmark detection result is then used in a hierarchical sparse shape composition framework for shape regularization. Finally, the extracted shape contour is fine-tuned by a post-processing step based on low level image features. The experimental results demonstrate that our feature selection algorithm reduces the feature dimension in a factor of 40 and improves both training and test efficiency. Further experiments conducted on 436 clinical AP pelvis X-rays show that our approach achieves an average point-to-curve error around 1.2 mm for femur and 1.9 mm for pelvis.

Diagenesis of a light, tight-oil chert reservoir at the Ediacaran/Cambrian boundary, Sultanate of Oman

The Al Shomou Silicilyte Member (Athel Formation) in the South Oman Salt Basin shares many of the characteristics of a light, tight-oil (LTO) reservoir: it is a prolifi c source rock mature for light oil, it produces light oil from a very tight matrix and reservoir, and hydraulic fracking technology is required to produce the oil. What is intriguing about the Al Shomou Silicilyte, and different from other LTO reservoirs, is its position related to the Precambrian/Cambrian Boundary (PCB) and the fact that it is a ‘laminated chert‘ rather than a shale. In an integrated diagenetic study we applied microstructural analyses (SEM, BSE) combined with state-of-the-art stable isotope and trace element analysis of the silicilyte matrix and fractures. Fluid inclusion microthermometry was applied to record the salinity and minimum trapping temperatures. The microstructural investigations reveal a fi ne lamination of the silicilyte matrix with a mean lamina thickness of ca. 20 μm consisting of predominantly organic matter-rich and fi nely crystalline quartz-rich layers, respectively. Authigenic, micron-sized idiomorphic quartz crystals are the main matrix components of the silicilyte. Other diagenetic phases are pyrite, apatite, dolomite, magnesite and barite cements. Porosity values based on neutron density logs and core plug data indicate porosity in the silicilyte ranges from less than 2% to almost to 40%. The majority of the pore space in the silicilyte is related to (primary) inter-crystalline pores, with locally important oversized secondary pores. Pore casts of the silica matrix show that pores are extremely irregular in three dimensions, and are generally interconnected by a complex web or meshwork of fi ne elongate pore throats. Mercury injection capillary data are in line with the microstructural observations suggesting two populations of pore throats, with an effective average modal diameter of 0.4 μm. The acquired geochemical data support the interpretation that the primary source of the silica is the ambient seawater rather than hydrothermal or biogenic. A maximum temperature of ca. 45°C for the formation of microcrystalline quartz in the silicilyte is good evidence that the lithifi cation and crystallization of quartz occurred in the fi rst 5 Ma after deposition. Several phases of brittle fracturing and mineralization occurred in response to salt tectonics during burial. The sequences of fracture-fi lling mineral phases (dolomite - layered chalcedony – quartz – apatite - magnesite I+II - barite – halite) indicates a complex fl uid evolution after silicilyte lithifi cation. Primary, all-liquid fl uid inclusions in the fracturefi lling quartz are good evidence of growth beginning at low temperatures, i.e. ≤ 50ºC. Continuous precipitation during increasing temperature and burial is documented by primary two-phase fl uid inclusions in quartz cements that show brines at 50°C and fi rst hydrocarbons at ca. 70°C. The absolute timing of each mineral phase can be constrained based on U-Pb geochronometry, and basin modelling. Secondary fl uid inclusions in quartz, magnesite and barite indicate reactivation of the fracture system after peak burial temperature during the major cooling event, i.e. uplift, between 450 and 310 Ma. A number of fi rst-order trends in porosity and reservoir-quality distribution are observed which are strongly related to the diagenetic and fl uid history of the reservoir: the early in-situ generation of hydrocarbons and overpressure development arrests diagenesis and preserves matrix porosity. Chemical compaction by pressure dissolution in the fl ank areas could be a valid hypothesis to explain the porosity variations in the silicilitye slabs resulting in lower porosity and poorer connectivity on the fl anks of the reservoir. Most of the hydrocarbon storage and production comes from intervals characterized by Amthor et al. 114488 preserved micropores, not hydrocarbon storage in a fracture system. The absence of oil expulsion results in present-day high oil saturations. The main diagenetic modifi cations of the silicilyte occurred and were completed relatively early in its history, i.e. before 300 Ma. An instrumental factor for preserving matrix porosity is the diffi culty for a given slab to evacuate all the fl uids (water and hydrocarbons), or in other words, the very good sealing capacity of the salt embedding the slab.

Bond Strength of Resin Composite to Dentin with Different Adhesive Systems: Influence of Relative Humidity and Application Time.

PURPOSE To investigate the influence of relative humidity and application time on bond strength to dentin of different classes of adhesive systems. MATERIALS AND METHODS A total of 360 extracted human molars were ground to mid-coronal dentin. The dentin specimens were treated with one of six adhesive systems (Syntac Classic, OptiBond FL, Clearfil SE Bond, AdheSE, Xeno Select, or Scotchbond Universal), and resin composite (Filtek Z250) was applied to the treated dentin surface under four experimental conditions (45% relative humidity/application time according to manufacturers' instructions; 45% relative humidity/reduced application time; 85% relative humidity/application time according to manufacturers' instructions; 85% relative humidity/reduced application time). After storage (37°C, 100% humidity, 24 h), shear bond strength (SBS) was measured and data analyzed with nonparametric ANOVA followed by Kruskal-Wallis tests and Mann-Whitney U-tests with Bonferroni-Holm correction for multiple testing (level of significance: α = 0.05). RESULTS Increased relative humidity and reduced application time had no effect on SBS for Clearfil SE Bond and Scotchbond Universal (p = 1.00). For Syntac Classic, OptiBond FL, AdheSE, and Xeno Select there was no effect on SBS of reduced application time of the adhesive system (p ≥ 0.403). However, increased relative humidity significantly reduced SBS for Syntac Classic, OptiBond FL, and Xeno Select irrespective of application time (p ≤ 0.003), whereas for AdheSE, increased relative humidity significantly reduced SBS at recommended application time only (p = 0.002). CONCLUSION Generally, increased relative humidity had a detrimental effect on SBS to dentin, but reduced application time had no effect.