Influence of matrix composition on polymerization stress development of experimental composites

Objective. Stress development at the tooth/restoration interface is one of the most important reasons for failure of adhesive restorations. The aim of this study was to evaluate the influence of BisGMA/TEGDMA (B/T) and UDMA/TEGDMA (U/T) ratios on polymerization stress (PS) and on the variables related to its development: degree of conversion (DC), polymerization maximum rate (Rp(max)), volumetric shrinkage (VS), elastic modulus (E), stress relaxation (SR) and viscosity of experimental composites. Method. Composites were formulated containing B/T or U/T in mol% ratios of 2: 8, 3: 7, 4: 6, 5: 5, 6: 4, 7: 3 and 8: 2, and 15 wt% of fumed silica. PS was determined with a universal testing machine. VS was measured with a linometer. E and SR were obtained in three-point bending. DC and Rp(max) were determined by real time NIR spectroscopy and viscosity was measured in viscometer. Data were submitted to one-way ANOVA, Tukey test (alpha = 0.05%) and regression analyses. Results. PS, VS, E and DC decreased and viscosity and Rp(max) increased with base monomer content in both series. PS showed strong correlation with VS, DC and viscosity. PS, VS and DC were higher and viscosity was lower for UDMA-based materials. Significance. Reduced viscosity, kinetics parameters and molecular characteristics led UDMA-based composites to elevated conversion and relatively lower PS at lower TEGDMA contents, compared to B/T composites. (C) 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Very limited transmission of FMD following introduction into a sheep flock

IN contrast to previous international experience, sheep played a critical role in the source and spread of foot-andnmouth disease (FNID) in the 2001 outbreak in the UK. At many stages during the outbreak, sheep wvere associated with the emergence of disease in new, that is, previously non-infected, areas, and in areas which had been apparently cleared of disease some weeks or months earlier. Although some information about this disease in sheep is available (Donaldson and Sellers 2000), an understanding of the natural history of FNIF in sheep will be improved based on lessons learned from the 2001 outbreak. This short communication describes an outbreak of FNID in a sheep flock in north-east England, where there was strong epidemiological and laboratory evidence of very limited transmission of disease following introduction.

Food safety and development of the beef industry in China

Food safety concerns have escalated in China as they have elsewhere, especially in relation to meats. Beef production and consumption has increased proportionately faster than all other meats over the last two decades. Yet the slaughtering, processing and marketing of beef remains, for the most part, extremely primitive when compared with Western beef supply chains. By comparing the economics of household slaughtering with that of various types of abattoirs, this paper explains why household slaughtering and wet markets still dominate beef processing and distribution in China. The negative economic, social and industry development implications of enforcing more stringent food safety regulations are highlighted. The willingness/capacity of consumers to pay the added cost of better inspection and other services to guarantee food safety is investigated. In this context, the paper also evaluates the market opportunities for both domestic and imported Green Beef. The paper questions the merit of policy initiatives aimed at modernising Chinese beef supply chains for the mass market along Western lines. (C) 2002 Elsevier Science Ltd. All rights reserved.

Alterations of neocortical pyramidal cell phenotype in the Ts65Dn mouse model of Down syndrome: Effects of environmental enrichment

Mental retardation in individuals with Down syndrome (DS) is thought to result from anomalous development and function of the brain; however, the underlying neuropathological processes have yet to be determined. Early implementation of special care programs result in limited, and temporary, cognitive improvements in DS individuals. In the present study, we investigated the possible neural correlates of these limited improvements. More specifically, we studied cortical pyramidal cells in the frontal cortex of Ts65Dn mice, a partial trisomy of murine chromosome 16 (MMU16) model characterized by cognitive deficits, hyperactivity, behavioral disruption and reduced attention levels similar to those observed in DS, and their control littermates. Animals were raised either in a standard or in an enriched environment. Environmental enrichment had a marked effect on pyramidal cell structure in control animals. Pyramidal cells in environmentally enriched control animals were significantly more branched and more spinous than non-enriched controls. However, environmental enrichment had little effect on pyramidal cell structure in Ts65Dn mice. As each dendritic spine receives at least one excitatory input, differences in the number of spines found in the dendritic arbors of pyramidal cells in the two groups reflect differences in the number of excitatory inputs they receive and, consequently, complexity in cortical circuitry. The present results suggest that behavioral deficits demonstrated in the Ts65Dn model could be attributed to abnormal circuit development.

Integrating environmental and economic life cycle analysis in product development: a material selection case study

Purpose Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win-win or trade-off situations will be identified via a Life Cycle Assessment/Life Cycle Costing (LCA/LCC) integrated model. Methods The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the Life Cycle Inventory (LCI) and the Life Cycle Impact Assessment (LCIA). Results In both the SST and CST systems the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win-win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its End-of-Life stage. Conclusions The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Further, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company, or in some cases even in its procurement practices.

Competitiveness of tourist destinations: the study of 65 key destinations for the development of regional tourism

Tourism has reached world importance in the economy. The competition in tourism has intensified between destinations, whether the destinations are cities, regions or countries. In this sense, the evaluation of the tourism competitiveness of these destinations may be helpful in planning and prioritizing actions that will benefit the industry. This article discusses the concept of competitiveness by the multidimensional view of performance, efficiency and unit analysis. Using the theoretical framework lifted, this article shows the 'Study on the competitiveness of the 65 destinations inducers of regional tourism development' prepared by the Tourism Ministry, the Brazilian Support Service to Micro and Small Enterprises (Sebrae) and Getulio Vargas Foundation (FGV), its assumptions that guided this study as well its methodological aspects. Based on this methodology, it was carried out a diagnosis of these 65 destinations selected by the Brazilian Ministry of Tourism to be inducers of tourism in their respective regions. The result of competitiveness reached by these 65 inductors destinations is presented in this article, providing a map of the level of competitiveness of tourism in Brazil.

Development of a biosensor for urea assay based on amidase inhibition, using an ion-selective electrode

A biosensor for urea has been developed based on the observation that urea is a powerful active-site inhibitor of amidase, which catalyzes the hydrolysis of amides such as acetamide to produce ammonia and the corresponding organic acid. Cell-free extract from Pseudomonas aeruginosa was the source of amidase (acylamide hydrolase, EC 3.5.1.4) which was immobilized on a polyethersulfone membrane in the presence of glutaraldehyde; anion-selective electrode for ammonium ions was used for biosensor development. Analysis of variance was used for optimization of the biosensorresponse and showed that 30 mu L of cell-free extract containing 7.47 mg protein mL(-1), 2 mu L of glutaraldehyde (5%, v/v) and 10 mu L of gelatin (15%, w/v) exhibited the highest response. Optimization of other parameters showed that pH 7.2 and 30 min incubation time were optimum for incubation ofmembranes in urea. The biosensor exhibited a linear response in the range of 4.0-10.0 mu M urea, a detection limit of 2.0 mu M for urea, a response timeof 20 s, a sensitivity of 58.245 % per mu M urea and a storage stability of over 4 months. It was successfully used for quantification of urea in samples such as wine and milk; recovery experiments were carried out which revealed an average substrate recovery of 94.9%. The urea analogs hydroxyurea, methylurea and thiourea inhibited amidase activity by about 90%, 10% and 0%, respectively, compared with urea inhibition.

Activity of praziquantel against Hymenolepis nana, at different development stages, in experimentally infected mice

Single doses of praziquantel were administered by oral route, at various time intervals, following the experimental infection of mice with Hymenolepis nana eggs (2000 per animal), to investigate the drug action against different development stages of the parasite. It was shown that either 25 or 50 mg/kg given on the 4th day after inoculation had just a partial effect against the cysticercoids. Moreover, 25 mg/kg given on the 7th day was not able to kill all juvenile forms as well. However, this dose administered on the 10th day, when the parasites had reached maturity taut oviposition was not yet initiated was 100% efficacious. The same degree of efficacy was achieved with the administration of 25 mg/kg on the 14th day when the fully mature worms already lay eggs. These animal findings indicate that in the treatment of human hymenolepiasis praziquantel, 25 mg/kg, should be taken twice, 10 days apart, so that the second dose kills the larval and juvenile forms which have survived the first one. This should be particularly recommended for treating H. nana infection in close communities.

Nova School of Business & Economics: Sustainability report

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

The effects of land-use development policies on forest management

This paper develops a model of a forest owner operating in an open-city environment, where the rent for developed land is increasing concave in nearby preserved open space and is rising over time reflecting an upward trend in households’ income. Thus, our model creates the possibility of switching from forestry to residential use at some point in the future. In addition it allows the optimal harvest length to vary over time even if stumpage prices and regeneration costs remain constant. Within this framework we examine how adjacent preserved open space and alternative development constraints affect the private landowner´s decisions. We find that in the presence of rising income, preserved open space hastens regeneration and conversion cuts but leads to lower density development of nearby unzoned parcels due to indirect dynamic effects. We also find that both a binding development moratorium and a binding minimum-lot-size policy can postpone regeneration and conversion cut dates and thus help to protect open space even if only temporarily. However, the policies do not have the same effects on development density of converted forestland. While the former leads to high-density development, the latter encourages low-density development.

Tbx1 and Bmp2 in the development of the ear, neural crest and pharyngeal system in mice

Dissertation presented to obtain the Ph.D degree in Biology

Larval development of Lepidophthalmus siriboia Felder & Rodrigues, 1993 (Decapoda: Thalassinidea) from the Amazon region, reared in the laboratory

The complete larval development of the ghost shrimp Lepidophthalmus siriboia Felder & Rodrigues, 1993 was described and illustrated in detail from specimens reared in the laboratory. Ovigerous females were collected at Canela Island in the northeastern region of the State of Pará. The larvae hatch as a prezoea, in which they persist for less than 3 hours. The larval development consists of three zoeal stages and a megalopa. The zoeal development averaged from 69 to 111 hours. The period in the megalopa stage was about 185 hours (about 8 days). The percentage of individuals succeeding in molt into juvenile stage was 91,8%. The first juvenile stage was reached 254 hours (about 10 days) after hatching. Morphological comparisons and their relationship with larvae of congeneric species are briefly discussed.

Análise estratégica da internacionalização da APFF- Administração do Porto da Figueira da Foz

Relatório de estágio de mestrado em Negócios Internacionais

Implementation of a customer relationship management system in an SME

The research conducted for this thesis has been carried out over a two year period as part of the Mobile Tools and Technology for customer care (MOTTO) project. The project was funded under the Applied Grant scheme administered by Enterprise Ireland and Nortel Networks Ltd. It was a partnership project between Galway-Mayo Institute of Technology, University of Limerick, National University of Ireland Galway, and a global Internet and communications company, Nortel Networks. The project aimed to investigate the enabling mobile communications technologies in e-Business and mobile communications in the area of Business-to-Business (B2B) customer care. The development of the application discussed in this thesis was developed in conjunction with the Galway-Mayo Institute of Technology, University of Limerick and AMT Ireland. The decision to develop the application in the Electronics Company of AMT in Limerick came about as a result of the contact established by Mark Southern from the University of Limerick. Mark was involved in overseeing the development and assisted in establishing the user requirements.

role of features and aspects in software development

Feature-Oriented Programming, Aspect-Oriented Programming, Software Product Lines, Stepwise Development