Pathogenic effect of microorganisms on loggerhead eggs

[EN] Different types of fungi and bacteria have been isolated from hatched and non-hatched as well as failed and non-failed eggs in natural sea turtles nests (Marco et al. 2006, Phillott and Parmenter, 2001, Phillott et al. 2001). Microbiota infections are common in artificial incubation activities and they seem to have an important negative impact on embryo development (Phillott, 2002). However, no clear evidences of their pathogenic effects have been described. The aim of this study was to investigate whether fungi and bacteria represent pathogenic agents to sea turtle eggs, and to assess whether there exists a specific period during incubation in which eggs are more susceptible to microorganisms.

Influence of loggerhead egg agregation on survival: why does single eggs buried into natural sand dye in few days?

[EN] The incubation is an essential life period for oviparous species that very often experiences a high mortality. In some reptile species the number of eggs that develop together in the incubation chamber affects survival and hatchling phenotype. Sea turtle eggs develop in underground locations on sandy beaches in large masses that usually have more than 80 eggs. Natural egg mortality seems to vary among species and for the sensitive leatherbacks, external eggs seems to survive better than internal ones within the nest.

Natural colonization of loggerhead turtle eggs by the pathogenic fungus Fusarium oxysporum

[EN] Sea turtle nests are exposed to different environmental risks that may affect their hatching success. Human exploitation, predation by wild or domestic animals, nest flooding or severe beach erosion or accession are common causes of egg mortality. However, there is very little information about the impact of microorganisms on turtle eggs. We analyzed loggerhead turtle eggs from Boavista Island (Republic of Cabo Verde) which were incubated under different environmental conditions in order to evaluate the presence and impact of fungus. We have isolated Fusarium oxysporum from dead and live eggs after three days of incubation.

Comparative study between the effects of hyaluronic acid and acid galactan purified from eggs of the mollusk Pomacea sp in wound healing

To compare the effect of hyaluronic acid (HA) and of AG on the healing of intestine wounds. Methods: The semi-purified extract of the eggs of the mollusc was obtained by fractionation with ammonium sulfate and purification for ion-exchange chromatography. The obtained galactans were eluted in water (neutral galactan) and in 0.1 and 0.2M NaCl (acidic galactans). The in vivo study was performed with 45 “Wistar” rats, separated in three groups (n=15). Solutions containing HA 1%, GA 1% or saline solution 0,9%, was placed topically on the sutures of wounds in the small intestine of the rats. After 05, 10 and 21 days the animals were sacrificed and biopsy of the healing tissue was done. Results: The hystologic grading was more significant for HA and AG groups when compared to the group C. AG stimulated the appearance of macrophages, giant cells and increase in the concentration of collagen in the area of the wound when compared to HA. Conclusion: The topical use of GA in intestinal wounds promoted the anticipation of events that are important in the wound healing

Trichogramma canariensis (Insecta: Hymenoptera: Trichogrammatidae) a parasitoid of eggs of the twinspot moth Chrysodeixis chalcites (Lepidoptera: Noctuidae) in the Canary Islands

A new species of Trichogramma Westwood (Hymenoptera: Trichogrammatidae) parasitizing eggs of the golden twin-spot moth (or tomato looper) Chrysodeixis chalcites (Esper) (Lepidoptera: Noctuidae) on banana crops in the Canary Islands, Spain, is described as Trichogramma canariensis del Pino & Polaszek, sp.n. The new species is closely related to T. brassicae Bezdenko. Limited aspects of morphology, coupled with ITS2 and COI sequences and reproductive data are presented to distinguish T. canariensis sp.n. from T. brassicae.

Isolation and recognition Saprolegnia species from fungal infected eggs of the rainbow trout in Mazandaran province farms

Fungal infection in the eggs of freshwater fish is well known as a problematic disease. That isolation and recognition Saprolegnia fungi from fungal infected eggs of the rainbow trout in Mazandaran province was the aim of this research. For this purpose fungal infected eggs were examined from six fish farm in the fall and winter 2005-2006. The eggs with fungi were inoculated on SDA, CMA, GPagar and hemp seed and sesame seed cultures in sterile tap water at room temperature (18-24°C). In this study recognized three genera and six species Saprolegniaceae members, based on morphological characteristics which contain: Saprolegnia, Achlya, Brevilegnia. Four species were identified in the genus Saprolegnia; S.mixta, S.parasitica, S.moniliphera, S.lapponica and one species was identified in the genus Achlya; A.oblongata. S.parasitica was isolated from almost all the farms. In addition, another nine genera and species were identified; Penicillium, Aspergillus, Paeciliomyces, Acremonium, Fusarium oxysporum, F.solani , Alternaria, Helminthosporium, Mucor.

Advanced Adhesion Strength Testing Methods of Thin Film Multilayers in Electronic Packaging Systems

With the continued miniaturization and increasing performance of electronic devices, new technical challenges have arisen. One such issue is delamination occurring at critical interfaces inside the device. This major reliability issue can occur during the manufacturing process or during normal use of the device. Proper evaluation of the adhesion strength of critical interfaces early in the product development cycle can help reduce reliability issues and time-to-market of the product. However, conventional adhesion strength testing is inherently limited in the face of package miniaturization, which brings about further technical challenges to quantify design integrity and reliability. Although there are many different interfaces in today's advanced electronic packages, they can be generalized into two main categories: 1) rigid to rigid connections with a thin flexible polymeric layer in between, or 2) a thin film membrane on a rigid structure. Knowing that every technique has its own advantages and disadvantages, multiple testing methods must be enhanced and developed to be able to accommodate all the interfaces encountered for emerging electronic packaging technologies. For evaluating the adhesion strength of high adhesion strength interfaces in thin multilayer structures a novel adhesion test configuration called “single cantilever adhesion test (SCAT)” is proposed and implemented for an epoxy molding compound (EMC) and photo solder resist (PSR) interface. The test method is then shown to be capable of comparing and selecting the stronger of two potential EMC/PSR material sets. Additionally, a theoretical approach for establishing the applicable testing domain for a four-point bending test method was presented. For evaluating polymeric films on rigid substrates, major testing challenges are encountered for reducing testing scatter and for factoring in the potentially degrading effect of environmental conditioning on the material properties of the film. An advanced blister test with predefined area test method was developed that considers an elasto-plastic analytical solution and implemented for a conformal coating used to prevent tin whisker growth. The advanced blister testing with predefined area test method was then extended by employing a numerical method for evaluating the adhesion strength when the polymer’s film properties are unknown.

Biofloc contribution to antioxidant defence status, lipid nutrition and reproductive performance of broodstock of the shrimp Litopenaeus stylirostris: Consequences for the quality of eggs and larvae

The aim of this study was to determine biofloc contributions to the antioxidant status and lipid nutrition of broodstock of Litopenaeus stylirostris in relationship with their reproductive performance and the health of larvae produced. Shrimp broodstock reared with Biofloc technology (BFT) compared to Clear water (CW) exhibited a higher health status with (i) a better final survival rate during the reproduction period (52.6% in CW against 79.8% in BFT); (ii) higher glutathione level (GSH) and total antioxidant status (TAS), reduced oxidized/reduced glutathione ratio and a higher spawning rate and frequency as well as higher gonado-somatic index and number of spawned eggs. Finally, larvae from broodstock from BFT exhibited higher survival rates at the Zoe 2 (+ 37%) and Post Larvae 1 (+ 51%) stages when compared with those from females from CW treatment. The improved reproductive performance of the broodstock and higher larvae survival rate resulting from BFT treatment may be linked to the dietary supplement obtained by the shrimp from natural productivity during BFT rearing. Indeed, our study confirms that biofloc particulates represent a potential source of dietary glutathione and a significant source of lipids, particularly essential phospholipids and n-3 highly unsaturated fatty acids (HUFA) for shrimps. Thus, broodstock from BFT treatment accumulated phospholipids, n-3 HUFA and arachidonic acid, which are necessary for vitellogenesis, embryogenesis and pre-feeding larval development. The predominant essential fatty acids, arachidonic acid (ARA), eicopentaeonic acid (EPA) and docosahexaenoic acid (DHA), had levels in the eggs that were, respectively, 2.5, 2.8 and 3 fold higher for BFT compared to the CW treatment. Statement of Relevance Today, the influence of biofloc technology on shrimp broodstock is not enough described and no information was available on the larvae quality. Moreover, two key pieces of new information emerge from the present study. Firstly, biofloc is a source of further dietary lipids that can act as energetic substrates, but also as a source of phospholipids and essential fatty acids necessary to sustain reproduction, embryonic and larval development. Second, improving the reproduction of the broodstock also leads to an improvement in the quality of the larvae. We think that our research is new and important to increase knowledge on biofloc topic. We believe the paper will contribute to the development of more efficient and therefore more sustainable systems.

Comparative study between the effects of hyaluronic acid and acid galactan purified from eggs of the mollusk Pomacea sp in wound healing

To compare the effect of hyaluronic acid (HA) and of AG on the healing of intestine wounds. Methods: The semi-purified extract of the eggs of the mollusc was obtained by fractionation with ammonium sulfate and purification for ion-exchange chromatography. The obtained galactans were eluted in water (neutral galactan) and in 0.1 and 0.2M NaCl (acidic galactans). The in vivo study was performed with 45 “Wistar” rats, separated in three groups (n=15). Solutions containing HA 1%, GA 1% or saline solution 0,9%, was placed topically on the sutures of wounds in the small intestine of the rats. After 05, 10 and 21 days the animals were sacrificed and biopsy of the healing tissue was done. Results: The hystologic grading was more significant for HA and AG groups when compared to the group C. AG stimulated the appearance of macrophages, giant cells and increase in the concentration of collagen in the area of the wound when compared to HA. Conclusion: The topical use of GA in intestinal wounds promoted the anticipation of events that are important in the wound healing

Modified atmosphere packaging effects on the postharvest quality of papaya fruit

Export of Fijian papaya (Carica papaya) fruit to destinations such as New Zealand has increased significantly over the last several years. Shipment by sea rather than air is the preferred method, given the capacity for larger volumes and reductions in cost. Long shipping times, however, can compromise fruit quality, although the use of modified atmosphere packaging (MAP) may provide a viable solution for extending fruit storage life. In a collaborative ACIAR project, Australian and Fijian researchers investigated the potential of using MAP to extend storage life of a Fijian papaya ('Fiji Red') fruit based on simulated sea transport conditions. Fruit were packed in one of three MAP environments within cartons, consisting of either a (1) Low Density Polyethylene (LDPE) bag with 10 g of KMnO4, (2) Polyamide Film (PF) bag with macro-perforations or (3) without a bag (control fruit). Fruit were held for 1, 2 or 3 weeks at 10°C before being unpacked, ripened and assessed for quality. On day 6 after outturn, fruit with the highest overall quality were those held in LDPE bags. LDPE fruit generally coloured up faster at outturn than PF or control fruit, had less overall moisture loss and scored high in flavour. Headspace carbon dioxide and oxygen concentrations within the LDPE bags were also near recommended levels for maintaining optimum storage-life quality. The LDPE bag provided the most suitable conditions for long term storage of fresh papaya fruit and is therefore the recommended MAP type for use with sea freight export out of Fiji.

Electronic Packaging of Paper-Based Anisotropic Magnetoresistive Sensors

This report investigates adaptations of electronic packaging methods used to create stacks of these sensors. Four methods were developed and tested to determine the best option in terms of mechanical stability and electrical conductivity of the system. For the first method, a stack is created by way of through paper vias (TPVs), a hole that is cut in the pads of the sensors and then filled with electrically conductive adhesive through the openings on the two sensors to be joined. The second method is called mechanical caulking and connects sensors through pads which have been lined with copper tape backed with conductive adhesive. The connection is created with a small copper rivet which is flattened in place by compressive force. The third method is the stitching method which is inspired by sewing of fabric. A pattern of thin copper wire is stitched on the pad of a sensor that is lined with copper tape backed with conductive adhesive. The wire is then stitched through a second sensor that is treated similarly with copper tape and the stack receives the same pattern through the two layers as was applied to the first sensor alone. The final method is the collapsed daisy chain which is the linear connection of sensors to their neighboring sensors via copper tape backed with conductive adhesive. The row of sensors is then collapsed in an alternating orientation into a single stack.

Use of inert gas-enriched atmospheres and post-packaging irradiation in shelf-life extension of watercress

Watercress (Nasturtium officinale R. Br.) is a semi-aquatic plant of the Brassicaceae family highly appreciated in the Mediterranean cuisine. It features sharp, peppery and slightly tangy taste and contains health-promoting phytochemicals. Its consumption as a fresh-cut product has increased in recent years, as well as the global market of minimally processed vegetables. This demand is driven by the growing interest in the role of food in promoting the human health and wellbeing and to meet consumer needs for fresh-like and more convenient foods. Due to the reduced shelf-life of this plant, the suitability of inert gas-enriched atmospheres and ionizing irradiation for preserving visual, nutritional and functional quality attributes during cold storage was studied. Watercress samples were gathered in the Northeast region of Portugal, rinsed in tap water and a portion was immediately analyzed (non-stored control). The remaining fresh material was packaged in polyethylene bags under N2- and Ar-enriched atmospheres, conventional atmosphere (air) and vacuum (no atmosphere). Samples under conventional atmosphere were irradiated at 1, 2 and 5 kGy of gamma-rays (predicted doses) in a 60Co experimental chamber. A non-irradiated control followed all the experiment. Then, all packaged samples were stored at 4 ºC for 7 days. The studied quality parameters included the colour that was measured with a Konica Minolta colorimeter, and total soluble solids and pH determined in squeezed juice. The proximate composition (moisture, proteins, fat, ash, carbohydrates and energy) was evaluated using the AOA C procedures. Organic acids, free sugars, fatty acids and tocopherols were analyzed by chromatographic techniques. Samples were also evaluated for its DPPH• scavenging activity, reducing power, and lipid peroxidation inhibition capacity trough the inhibition of the β-carotene bleaching and thiobarbituric acid reactive substances (TBAR S) formation. Differences among treatments were analyzed using the one-way analysis of variance (ANO VA) and a linear discriminant analysis (LDA ) was used to evaluate the effects on the overall postharvest quality. After evaluating the effect on the individual quality parameters, the LDA revealed that the Ar-enriched atmosphere and the irradiation at 2 kGy were suitable processing choices for preserving the integrity of the non-stored control samples during cold storage. Thus, these non-thermal treatments were highlighted for shelf-life extension of fresh-cut watercress.