Eficiência energética e econômica da produção de leite bovino em explorações familiares no município de Pardinho, região de Botucatu- SP

The study aimed to analyze the energy and economic efficiency rate family farms producing milk in the county of Pardinho, Sao Paulo State. The criteria used to define producers in this study is that outlined by the Brazilian agricultural credit system FEAP (Fund Expansion of Agribusiness Paulista). Through primary data, obtained by verbal reports, the agroecosystem technical itineraries were re-established, detailing the process applied, machinery, implements, equipment, supplies and manual work. These were transformed into energy and economic units, which allowed determining the established connection between energy economics outputs and inputs. The hypothesis of this study is that the energetic expenditure may be coincidental with economic expenditures. The energetic and economic flows were analyzed, using a structure of expenditures, by type, source and form of gross energy, as well as the energetic point of view. Four producers were found to have different technical itineraries. Producers 1 and 2 achieved the highest energy and economic efficiency rates. The producer with the lowest efficiency rates was producer 4. The energy sources not renewable like chemical fertilizers were the most used reaching an average of 82.9% for the energy and 52.86% for the economic expenditures. When comparing energy and economic efficiency it is possible to verify that both forms of analysis are close, obtaining a broader idea about energy resources allocation.

Avaliação energética econômica do agroecossistema algodão: uma abordagem entre sistemas familiares de produção do Paraguai e do Brasil

The objective of this work was to evaluate the energy and economic efficiency indexes per unit of cotton agro-ecosystem area in family production systems of Paraguay and Brazil; and, to establish a relationship between the energy and economic. Typologies presented by the Program to Support Small Cotton Holdings (Paraguay), and by the National Program for Strengthening Family Agriculture (Brazil). Family systems of the two countries were identified; these are located from Paraguay (San Juan–CA) and from Brazil (Leme–SP). To construct the energy expenditure structure of the cotton agro-ecosystem, as well as to assess the economic efficiency, the mean values obtained were considered, when they presented similarities in production systems and they were within the typology proposed in this study. From the technical itinerary observed the Paraguayan agro-ecosystem depended (fossil fuel 56.76%) and industrial source (35.99%). Thus, the energy balance of the agricultural stage was established, which attained a value of 17,740.69 MJ ha-1; an energy efficiency of 5.28, and a cultural efficiency of 3.04. The Brazilian agro-ecosystem depended on energy from industrial source (insecticides 39.82%) and from fossil fuel (33.59%); it reached an energy balance of 19,547.88 MJ ha-1; an energy efficiency of 2.12, and a cultural efficiency index of 0.71. In the economic and energy indicator ratio, with regard to the months referring to the harvest time, that is to say, March, April, and May, the maximum economic efficiency indicator of paraguay was attained in the month of May (1,00), and from Brazil in the month of May (1,71). Both production systems analyzed were presented efficient, however, dependent of external circumstances and non-renewable energy sources.

Valiação energética e econômica do agroecossistema algodão: uma abordagem entre sistemas familiares de produção do Paraguai e Brasil

The objective of this work was to evaluate the energy and economic efficiency indexes per unit of cotton agro-ecosystem area in family production systems of Paraguay and Brazil; and, to establish a relationship between the energy and economic. Typologies presented by the Program to Support Small Cotton Holdings (Paraguay), and by the National Program for Strengthening Family Agriculture (Brazil). Family systems of the two countries were identified; these are located from Paraguay (San Juan–CA) and from Brazil (Leme–SP). To construct the energy expenditure structure of the cotton agro-ecosystem, as well as to assess the economic efficiency, the mean values obtained were considered, when they presented similarities in production systems and they were within the typology proposed in this study. From the technical itinerary observed the Paraguayan agro-ecosystem depended (fossil fuel 56.76%) and industrial source (35.99%). Thus, the energy balance of the agricultural stage was established, which attained a value of 17,740.69 MJ ha-1; an energy efficiency of 5.28, and a cultural efficiency of 3.04. The Brazilian agro-ecosystem depended on energy from industrial source (insecticides 39.82%) and from fossil fuel (33.59%); it reached an energy balance of 19,547.88 MJ ha-1; an energy efficiency of 2.12, and a cultural efficiency index of 0.71. In the economic and energy indicator ratio, with regard to the months referring to the harvest time, that is to say, March, April, and May, the maximum economic efficiency indicator of paraguay was attained in the month of May (1,00), and from Brazil in the month of May (1,71). Both production systems analyzed were presented efficient, however, dependent of external circumstances and non-renewable energy sources.

Análise energética na agricultura: ferramenta importante para a produção agrícola mais sustentável

A produção de alimentos e matérias-primas é considerada um dos maiores desafios da atualidade. Assim, os impactos gerados pela atividade da agricultura são muitos, como por exemplo, erosão dos solos, poluição de águas doces e geração de resíduos. Com isso faz-se necessário o desenvolvimento de tecnologias para promover a redução desses impactos. O presente trabalho tem como objetivo apresentar e discutir análises energéticas em sistemas de produção agrícola como uma ferramenta capaz de destacar a dependência dos agroecossistemas de energia externa e de fontes não renováveis, particularmente de fontes fósseis. Assim, com o uso dessa ferramenta, alternativas para uma produção agrícola com menos impacto ambiental pode ser alcançada, proporcionando a ampliação das possibilidades para uma produção mais sustentável.

Estrutura Institucional da Sustentabilidade: Panorama Comparativo Preliminar Brasil - França.

A sustentabilidade vem sendo perseguida em todos os segmentos da economia tanto dos países desenvolvidos quanto em desenvolvimento. Especificamente no que diz respeito ao setor rural destes países não poderia ser diferente. O presente trabalho se propõe a analisar e comparar o Brasil e a França em termos das principais semelhanças e diferenças nas suas estruturas institucionais voltadas para a promoção do desenvolvimento rural sustentável. Para tanto, foram utilizados os métodos Dedutivo e Indutivo. Verificou-se que as estruturas institucionais de ambos os países são relativamente semelhantes, muito embora haja especificidades relacionadas às distintas realidades rurais destes países em termos de atividades agropecuárias, florestais, propriedades rurais, dentre outros aspectos. O desenvolvimento rural sustentável desempenha, assim, um papel importante nas políticas nacionais, da França e do Brasil, sendo que a agropecuária, o meio ambiente, as energias, o turismo, a educação e a pesquisa são as principais áreas de sustentabilidade em ambos os países. Pode-se observar que, em geral, um Ministério francês responsabiliza-se, em se tratando de temas vinculados ao desenvolvimento rural sustentável, por uma área de ação mais ampla e menos precisa comparativamente a um Ministério brasileiro. Por fim, alguns temas associados ao tema do desenvolvimento rural sustentável são exclusivamente observados nos Ministérios brasileiros, tais como proteção das florestais tropicais, povos indígenas e biocombustíveis.

Demanda energética em diferentes manejos de solo e híbridos de milho

This study aimed to account the energy balance of six different farming systems: CMT (minimum tillage with transgenic corn); CMNT (minimum tillage with non-transgenic corn); PCT (conventional tillage with transgenic corn); PCNT (conventional tillage with non-transgenic corn); PDT (no-tillage system with transgenic corn) and PDNT (no-tillage system with non-transgenic corn). The study was carried out at the Experimental Farm Lageado FCA/Unesp, Botucatu - SP. The energy balance was performed by subtracting the total energy inputs by the total energy output. Energy efficiency was calculated by dividing the total energy output by the total energy inputs. The total values ​​of energy inputs and outputs were expressed in MJ.ha-1 (mega joules per hectare). To calculate the energy inputs were accounted the fuel consumption and lubricants, depreciation energy of machinery and implements, manpower and agricultural inputs. The energy outputs were calculated according to the maize yield. The result shows that the system PDT was the system that had better energy efficiency and the system that had the lowest efficiency was the PCT system. The system with lower energy demand was the PDT and the greatest demand was PCNT.

Sistema fotovoltaico monocristalino para bombeamento de água

Since ancient times, it has been a huge challenge to all people around the world to manage to get their fresh water, keeping it clean and providing it to every human being, so that it can be used for their daily needs. This is especially true for small properties in the countryside and in isolated areas with low demographic density. Pumping the water in those regions is a solution that rationalizes its use in domestic chores, in animal rearing and in the irrigation systems of cultivated areas. Making feasible local, renewable and non-polluted energetic alternatives is the aim for those areas that are usually far away from the public electric network. Using photovoltaic solar energy is the alternative now proposed. For this objective was built a system with two monocrystalline panels, one pump, two water tanks, two level sensors and a solenoid valve to pump water, using a pump powered an array of monocrystalline solar panels. The main goal was to compare their rate of water flow and their energy consumption. The use of one data acquisition equipment allowed collecting meteorological, electrical and hydraulic values, and also serving for the control and activation of the pumping system. During four months in a row as from April 2009, arrangements with one or two panels were tested. Mathematics correlations and adjustment lines were used to interpret the behavior of obtained dataset. During the analyzed period the system followed the linear equations with great accuracy. The daily average amount of water pumped by the several tested arrays stayed between 1,100 and 2,500 liters, and that is enough to supply a small rural property. The pumping system with two panels effectively showed the major amount of water, but a system with one panel can be an economical solution until 1,500 liters on day. It did not characterize a direct relationship between power or quantity of photovoltaic panels and daily outflow of water pumping.

Utilização de extratos vegetais em proteção de plantas

Usage of pesticies in excessive doses or in an inadequate way to control diseases, pests and weeds, has promoted significant environmental damage, contamination of animals, intoxication of farmers, among others. These factors lead to occur the resistance of weeds, pests and pathogens, the appearance of iatrogenic diseases, biological imbalance and reduction in biodiversity. Seeking less aggressive alternatives, plant extracts have been used successfully. Compared to synthetic products, they offer great advantages as generating new compounds, which pathogens are unable to inactivate, and are less toxic, of rapid degradation in the environment, they have broad modes of action, and are derived from renewable resources. It should be emphasized that there are some limitations on its use. The extracts have potencial as insecticide, fungicide, herbicide and nematicide and are considered of good efficiency. The methodologies for obtaining can be achieved through cold extraction, open and closed hot system. The use of plant extracts reappears as a promising and unique option for integrated management in plant protection, being considered as an alternative to control plant pathogens, demonstrating excellent results without causing harm to the environment and living beings.

Influência de elementos terras raras nas propriedades catalíticas de óxidos derivados de hidrotalcitas para produção de biodiesel etílico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Bioatividade de derivados de Annonaceae sobre Helicoverpa armigera (Hübner, 1808) (Lepidoptera: Noctuidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Teorias semiclássica e efetiva da gravitação

Pós-graduação em Física - IFT

Produção de amilases de Rhizopus microsporus var. oligosporus e hidrólise enzimática do bagaço de mandioca visando a produção de etanol por Saccharomyces cerevisiae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ciclo de cogeração a partir de resíduos de poda de árvores na cidade de Guaratinguetá

The current socio-economic situation has brought a need to look for alternative ways to get energy that allow reducing the high dependence on fossil fuel sources while deflect from the climate change arising from the result of the use of these energy resources. Renewable sources of energy, low and medium temperature appear as high potential of energy resources, which have a major influence on the way of life of the people to enable decentralized energy production. In Brazil, in particular, have also the need to decentralize the energy grid, currently focused on energy from water source. The current water crisis, exemplifies the urgency of betting on other energy sources, as a way to help in emergency situations such as the current one. Therefore, this study evaluates the possibility of using biomass as a heat source in a Rankine Cycle Organic where instead of water; it uses thermal fluid as working fluid, was compared the urban areas of the city of Guaratinguetá with the urban area of the metropolitan region of São Paulo. Thus, it was established two scenarios, so it was possible to establish the cycle to be used

Colunas de Winogradsky com águas contaminadas por petróleo e derivados monitoradas por ensaios ecotoxicológicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nanopartículas de Pd suportadas em compósitos óxido-carbono: influência das interações metal-suporte na oxidação de etanol em meio básico

Fuel cells powered directly with ethanol (Direct Ethanol Fuel Cell-DEFC) are very attractive for the possibility of using a renewable fuel in the generation of clean energy. However, it is still necessary to deepen the understanding of catalytic processes and their dependence on the catalytic properties. This work proposes to study the catalytic activity of ethanol oxidation in an alkaline medium of Pd nanoparticles supported in carbon oxide hybrids using various transition metal oxides (MoO3, TiO2, WO3 and ZrO2). The materials prepared were characterized by techniques such as X-ray diffraction, transmission electron microscopy (TEM) and X-ray dispersive spectroscopy (EDX) to verify the structure, the distribution of particles in the supports and the presence of Pd on particles oxide. Experiments of X-rays absorption spectroscopy were carried out using soft X-rays (SXS) to evaluate the changes in the electronic properties of the Pd particles caused by interactions with different oxides. Measurements of cyclic voltammetry and potential sweeps of adsorbed CO oxidation allowed evaluating general aspects of the catalysts' electrochemical behavior and determining the electrochemically active area thereof. The catalytic performances of ethanol oxidation in alkaline medium were evaluated by electrochemical techniques (potential scan and chronoamperometry), and showed an improvement in activity with the addition of oxides in material containing only carbon, which was most pronounced for the catalyst containing TiO2. This improvement was predominantly associated with the electronic effects caused by the interaction of Pd on the support, causing a vacancy in the 4d band of Pd which, in turn, produces variations in adsorption energies of the species...