A multi-method approach for the assessment of composite indices and rankings

There is growing popularity in the use of composite indices and rankings for cross-organizational benchmarking. However, little attention has been paid to alternative methods and procedures for the computation of these indices and how the use of such methods may impact the resulting indices and rankings. This dissertation developed an approach for assessing composite indices and rankings based on the integration of a number of methods for aggregation, data transformation and attribute weighting involved in their computation. The integrated model developed is based on the simulation of composite indices using methods and procedures proposed in the area of multi-criteria decision making (MCDM) and knowledge discovery in databases (KDD). The approach developed in this dissertation was automated through an IT artifact that was designed, developed and evaluated based on the framework and guidelines of the design science paradigm of information systems research. This artifact dynamically generates multiple versions of indices and rankings by considering different methodological scenarios according to user specified parameters. The computerized implementation was done in Visual Basic for Excel 2007. Using different performance measures, the artifact produces a number of excel outputs for the comparison and assessment of the indices and rankings. In order to evaluate the efficacy of the artifact and its underlying approach, a full empirical analysis was conducted using the World Bank's Doing Business database for the year 2010, which includes ten sub-indices (each corresponding to different areas of the business environment and regulation) for 183 countries. The output results, which were obtained using 115 methodological scenarios for the assessment of this index and its ten sub-indices, indicated that the variability of the component indicators considered in each case influenced the sensitivity of the rankings to the methodological choices. Overall, the results of our multi-method assessment were consistent with the World Bank rankings except in cases where the indices involved cost indicators measured in per capita income which yielded more sensitive results. Low income level countries exhibited more sensitivity in their rankings and less agreement between the benchmark rankings and our multi-method based rankings than higher income country groups.

Selection and passage of county land preservation voter referendum: The role of government

County jurisdictions in America are increasingly exercising self-government in the provision of public community services through the context of second order federalism. In states exercising this form of contemporary governance, county governments with "reformed" policy-making structures and professional management practices, have begun to rival or surpass municipalities in the delivery of local services with regional implications such as environmental protection (Benton 2002, 2003; Marando and Reeves, 1993). ^ The voter referendum, a form of direct democracy, is an important component of county land preservation and environmental protection governmental policies. The recent growth and success of land preservation voter referendums nationwide reflects an increase in citizen participation in government and their desire to protect vacant land and its natural environment from threats of over-development, urbanization and sprawl, loss of open space and farmland, deterioration of ecosystems, and inadequate park and recreational amenities. ^ The study's design employs a sequential, mixed method. First, a quantitative approach employs the Heckman two-step model. It is fitted with variables for the non-random sample of 227 voter referendum counties and all non-voter referendum counties in the U.S. from 1988 to 2009. Second, the qualitative data collected from the in-depth investigation of three South Florida county case studies with twelve public administrator interviews is transformed for integration with the quantitative findings. The purpose of the qualitative method is to complement, explain and enrich the statistical analysis of county demographic, socio-economic, terrain, regional, governance and government, political preference, environmentalism, and referendum-specific factors. ^ The research finds that government factors are significant in terms of the success of land preservation voter referendums; more specifically, the presence of self-government authority (home rule charter), a reformed structure (county administrator/manager or elected executive), and environmental interest groups. In addition, this study concludes that successful counties are often located coastal, exhibit population and housing growth, and have older and more educated citizens who vote democratic in presidential elections. The analysis of case study documents and public administrator interviews finds that pragmatic considerations of timing, local politics and networking of regional stakeholders are also important features of success. Further research is suggested utilizing additional public participation, local government and public administration factors.^

Online solid phase extraction liquid chromatography tandem mass spectrometry (SPE-LC-MS/MS) method for the determination of sucralose in reclaimed and drinking waters and its photo degradation in natural waters from South Florida

Background Sucralose has gained popularity as a low calorie artificial sweetener worldwide. Due to its high stability and persistence, sucralose has shown widespread occurrence in environmental waters, at concentrations that could reach up to several μg/L. Previous studies have used time consuming sample preparation methods (offline solid phase extraction/derivatization) or methods with rather high detection limits (direct injection) for sucralose analysis. This study described a faster and sensitive analytical method for the determination of sucralose in environmental samples. Results An online SPE-LC–MS/MS method was developed, being capable to quantify sucralose in 12 minutes using only 10 mL of sample, with method detection limits (MDLs) of 4.5 ng/L, 8.5 ng/L and 45 ng/L for deionized water, drinking and reclaimed waters (1:10 diluted with deionized water), respectively. Sucralose was detected in 82% of the reclaimed water samples at concentrations reaching up to 18 μg/L. The monthly average for a period of one year was 9.1 ± 2.9 μg/L. The calculated mass loads per capita of sucralose discharged through WWTP effluents based on the concentrations detected in wastewaters in the U. S. is 5.0 mg/day/person. As expected, the concentrations observed in drinking water were much lower but still relevant reaching as high as 465 ng/L. In order to evaluate the stability of sucralose, photodegradation experiments were performed in natural waters. Significant photodegradation of sucralose was observed only in freshwater at 254 nm. Minimal degradation (<20%) was observed for all matrices under more natural conditions (350 nm or solar simulator). The only photolysis product of sucralose identified by high resolution mass spectrometry was a de-chlorinated molecule at m/z 362.0535, with molecular formula C12H20Cl2O8. Conclusions Online SPE LC-APCI/MS/MS developed in the study was applied to more than 100 environmental samples. Sucralose was frequently detected (>80%) indicating that the conventional treatment process employed in the sewage treatment plants is not efficient for its removal. Detection of sucralose in drinking waters suggests potential contamination of surface and ground waters sources with anthropogenic wastewater streams. Its high resistance to photodegradation, minimal sorption and high solubility indicate that sucralose could be a good tracer of anthropogenic wastewater intrusion into the environment.

Site specific growth of metal catalyzed silica nanowires for biological and chemical sensing

In this research the integration of nanostructures and micro-scale devices was investigated using silica nanowires to develop a simple yet robust nanomanufacturing technique for improving the detection parameters of chemical and biological sensors. This has been achieved with the use of a dielectric barrier layer, to restrict nanowire growth to site-specific locations which has removed the need for post growth processing, by making it possible to place nanostructures on pre-pattern substrates. Nanowires were synthesized using the Vapor-Liquid-Solid growth method. Process parameters (temperature and time) and manufacturing aspects (structural integrity and biocompatibility) were investigated. Silica nanowires were observed experimentally to determine how their physical and chemical properties could be tuned for integration into existing sensing structures. Growth kinetic experiments performed using gold and palladium catalysts at 1050°C for 60 minutes in an open-tube furnace yielded dense and consistent silica nanowire growth. This consistent growth led to the development of growth model fitting, through use of the Maximum Likelihood Estimation (MLE) and Bayesian hierarchical modeling. Transmission electron microscopy studies revealed the nanowires to be amorphous and X-ray diffraction confirmed the composition to be SiO2 . Silica nanowires were monitored in epithelial breast cancer media using Impedance spectroscopy, to test biocompatibility, due to potential in vivo use as a diagnostic aid. It was found that palladium catalyzed silica nanowires were toxic to breast cancer cells, however, nanowires were inert at 1μg/mL concentrations. Additionally a method for direct nanowire integration was developed that allowed for silica nanowires to be grown directly into interdigitated sensing structures. This technique eliminates the need for physical nanowire transfer thus preserving nanowire structure and performance integrity and further reduces fabrication cost. Successful nanowire integration was physically verified using Scanning electron microscopy and confirmed electrically using Electrochemical Impedance Spectroscopy of immobilized Prostate Specific Antigens (PSA). The experiments performed above serve as a guideline to addressing the metallurgic challenges in nanoscale integration of materials with varying composition and to understanding the effects of nanomaterials on biological structures that come in contact with the human body.

Lattice Boltzmann Method for Flow and Heat Transfer in Microgeometries

Recent technological developments have made it possible to design various microdevices where fluid flow and heat transfer are involved. For the proper design of such systems, the governing physics needs to be investigated. Due to the difficulty to study complex geometries in micro scales using experimental techniques, computational tools are developed to analyze and simulate flow and heat transfer in microgeometries. However, conventional numerical methods using the Navier-Stokes equations fail to predict some aspects of microflows such as nonlinear pressure distribution, increase mass flow rate, slip flow and temperature jump at the solid boundaries. This necessitates the development of new computational methods which depend on the kinetic theory that are both accurate and computationally efficient. In this study, lattice Boltzmann method (LBM) was used to investigate the flow and heat transfer in micro sized geometries. The LBM depends on the Boltzmann equation which is valid in the whole rarefaction regime that can be observed in micro flows. Results were obtained for isothermal channel flows at Knudsen numbers higher than 0.01 at different pressure ratios. LBM solutions for micro-Couette and micro-Poiseuille flow were found to be in good agreement with the analytical solutions valid in the slip flow regime (0.01 < Kn < 0.1) and direct simulation Monte Carlo solutions that are valid in the transition regime (0.1 < Kn < 10) for pressure distribution and velocity field. The isothermal LBM was further extended to simulate flows including heat transfer. The method was first validated for continuum channel flows with and without constrictions by comparing the thermal LBM results against accurate solutions obtained from analytical equations and finite element method. Finally, the capability of thermal LBM was improved by adding the effect of rarefaction and the method was used to analyze the behavior of gas flow in microchannels. The major finding of this research is that, the newly developed particle-based method described here can be used as an alternative numerical tool in order to study non-continuum effects observed in micro-electro-mechanical-systems (MEMS).

Motion Correction Algorithm of Lung Tumors for Respiratory Gated PET Images

Respiratory gating in lung PET imaging to compensate for respiratory motion artifacts is a current research issue with broad potential impact on quantitation, diagnosis and clinical management of lung tumors. However, PET images collected at discrete bins can be significantly affected by noise as there are lower activity counts in each gated bin unless the total PET acquisition time is prolonged, so that gating methods should be combined with imaging-based motion correction and registration methods. The aim of this study was to develop and validate a fast and practical solution to the problem of respiratory motion for the detection and accurate quantitation of lung tumors in PET images. This included: (1) developing a computer-assisted algorithm for PET/CT images that automatically segments lung regions in CT images, identifies and localizes lung tumors of PET images; (2) developing and comparing different registration algorithms which processes all the information within the entire respiratory cycle and integrate all the tumor in different gated bins into a single reference bin. Four registration/integration algorithms: Centroid Based, Intensity Based, Rigid Body and Optical Flow registration were compared as well as two registration schemes: Direct Scheme and Successive Scheme. Validation was demonstrated by conducting experiments with the computerized 4D NCAT phantom and with a dynamic lung-chest phantom imaged using a GE PET/CT System. Iterations were conducted on different size simulated tumors and different noise levels. Static tumors without respiratory motion were used as gold standard; quantitative results were compared with respect to tumor activity concentration, cross-correlation coefficient, relative noise level and computation time. Comparing the results of the tumors before and after correction, the tumor activity values and tumor volumes were closer to the static tumors (gold standard). Higher correlation values and lower noise were also achieved after applying the correction algorithms. With this method the compromise between short PET scan time and reduced image noise can be achieved, while quantification and clinical analysis become fast and precise.

Integração de projetos no ensino através de BIM: uma abordagem dos cursos de arquitetura e urbanismo da UFRN e da UFPB

The integration between architectural design and structur al systems consi sts, in academic education, one of the main challenges to the architectural design education . Recent studies point to the relevance of the use of computational tools in academic settings as an important strategy for such integration. Although in recent yea rs teaching experience using BIM (BuildingInformationModeling) may be incorporated by the a rchitecture schools , notes the need for further didactic and pedagogical practices that promote the architectural design and structur al integration teaching. This pa per analyzes experiences developed within the UFRN and UFPB, seeking to identify tools, processes and products used, pointing limitations and potentials in subjects taught in these institutions. The research begins with a literature review on teaching BIM and related aspects to the integration of architectural design and stru c tur e . It has been used as data collection techniques in studio the direct observation, the use of questionnaires and interviews with students and teachers, and mixed method, qualitativ e and quantitative analysis . In UFRN, the scope of the Integrated Workshop as a compulsory subject in the curriculum, favors the integration of disciplines studied here as it allows teachers from different disciplines at the same project studio . Regarding the use of BIM form initial users, BIM modelers, able to extract quantitative and automatically speed up production, gaining in quality in the products, however learn the tool and design in parallel cause some difficulties. UFPB, lack of required courses o n BIM, generates lack of knowledge and confidence in using the tool and processes, by most students. Thus we see the need for greater efforts by school to adopt BIM skills and training. There is a greater need for both BIM concept, in order to promote BIM process and consequent better use of tools, and obsolete avoiding impairment of technology, merely a tool. It is considered the inclusion of specific subjects with more advanced BIM skills, through partnerships with engineering degrees and the promotion of trans disciplinary integration favoring the exchange of different cultures from the academic environment.

Time-domain simulation of wave-induced ship motions by a Rankine panel method

In this thesis, a numerical program has been developed to simulate the wave-induced ship motions in the time domain. Wave-body interactions have been studied for various ships and floating bodies through forced motion and free motion simulations in a wide range of wave frequencies. A three-dimensional Rankine panel method is applied to solve the boundary value problem for the wave-body interactions. The velocity potentials and normal velocities on the boundaries are obtained in the time domain by solving the mixed boundary integral equations in relation to the source and dipole distributions. The hydrodynamic forces are calculated by the integration of the instantaneous hydrodynamic pressures over the body surface. The equations of ship motion are solved simultaneously with the boundary value problem for each time step. The wave elevation is computed by applying the linear free surface conditions. A numerical damping zone is adopted to absorb the outgoing waves in order to satisfy the radiation condition for the truncated free surface. A numerical filter is applied on the free surface for the smoothing of the wave elevation. Good convergence has been reached for both forced motion simulations and free motion simulations. The computed added-mass and damping coefficients, wave exciting forces, and motion responses for ships and floating bodies are in good agreement with the numerical results from other programs and experimental data.

Dosimetric Evaluation of Metal Artefact Reduction using Metal Artefact Reduction (MAR) Algorithm and Dual-energy Computed Tomography (CT) Method

Purpose: Computed Tomography (CT) is one of the standard diagnostic imaging modalities for the evaluation of a patient’s medical condition. In comparison to other imaging modalities such as Magnetic Resonance Imaging (MRI), CT is a fast acquisition imaging device with higher spatial resolution and higher contrast-to-noise ratio (CNR) for bony structures. CT images are presented through a gray scale of independent values in Hounsfield units (HU). High HU-valued materials represent higher density. High density materials, such as metal, tend to erroneously increase the HU values around it due to reconstruction software limitations. This problem of increased HU values due to metal presence is referred to as metal artefacts. Hip prostheses, dental fillings, aneurysm clips, and spinal clips are a few examples of metal objects that are of clinical relevance. These implants create artefacts such as beam hardening and photon starvation that distort CT images and degrade image quality. This is of great significance because the distortions may cause improper evaluation of images and inaccurate dose calculation in the treatment planning system. Different algorithms are being developed to reduce these artefacts for better image quality for both diagnostic and therapeutic purposes. However, very limited information is available about the effect of artefact correction on dose calculation accuracy. This research study evaluates the dosimetric effect of metal artefact reduction algorithms on severe artefacts on CT images. This study uses Gemstone Spectral Imaging (GSI)-based MAR algorithm, projection-based Metal Artefact Reduction (MAR) algorithm, and the Dual-Energy method.

Materials and Methods: The Gemstone Spectral Imaging (GSI)-based and SMART Metal Artefact Reduction (MAR) algorithms are metal artefact reduction protocols embedded in two different CT scanner models by General Electric (GE), and the Dual-Energy Imaging Method was developed at Duke University. All three approaches were applied in this research for dosimetric evaluation on CT images with severe metal artefacts. The first part of the research used a water phantom with four iodine syringes. Two sets of plans, multi-arc plans and single-arc plans, using the Volumetric Modulated Arc therapy (VMAT) technique were designed to avoid or minimize influences from high-density objects. The second part of the research used projection-based MAR Algorithm and the Dual-Energy Method. Calculated Doses (Mean, Minimum, and Maximum Doses) to the planning treatment volume (PTV) were compared and homogeneity index (HI) calculated.

Results: (1) Without the GSI-based MAR application, a percent error between mean dose and the absolute dose ranging from 3.4-5.7% per fraction was observed. In contrast, the error was decreased to a range of 0.09-2.3% per fraction with the GSI-based MAR algorithm. There was a percent difference ranging from 1.7-4.2% per fraction between with and without using the GSI-based MAR algorithm. (2) A range of 0.1-3.2% difference was observed for the maximum dose values, 1.5-10.4% for minimum dose difference, and 1.4-1.7% difference on the mean doses. Homogeneity indexes (HI) ranging from 0.068-0.065 for dual-energy method and 0.063-0.141 with projection-based MAR algorithm were also calculated.

Conclusion: (1) Percent error without using the GSI-based MAR algorithm may deviate as high as 5.7%. This error invalidates the goal of Radiation Therapy to provide a more precise treatment. Thus, GSI-based MAR algorithm was desirable due to its better dose calculation accuracy. (2) Based on direct numerical observation, there was no apparent deviation between the mean doses of different techniques but deviation was evident on the maximum and minimum doses. The HI for the dual-energy method almost achieved the desirable null values. In conclusion, the Dual-Energy method gave better dose calculation accuracy to the planning treatment volume (PTV) for images with metal artefacts than with or without GE MAR Algorithm.

Development and reliability of a direct access sensor using flip chip on flex technology with anisotropic conductive adhesive

Technological developments in biomedical microsystems are opening up new opportunities to improve healthcare procedures. Swallowable diagnostic sensing capsules are an example of these. In none of the diagnostic sensing capsules, is the sensor’s first level packaging achieved via Flip Chip Over Hole (FCOH) method using Anisotropic Conductive Adhesive (ACA). In a capsule application with direct access sensor (DAS), ACA not only provides the electrical interconnection but simultaneously seals the interconnect area and the underlying electronics. The development showed that the ACA FCOH was a viable option for the DAS interconnection. Adequate adhesive formed a strong joint that withstood a shear stress of 120N/mm2 and a compressive stress of 6N required to secure the final sensor assembly in place before encapsulation. Electrical characterization of the ACA joint in a fluid environment showed that the ACA was saturated with moisture and that the ions in the solution actively contributed to the leakage current, characterized by the varying rate of change of conductance. Long term hygrothermal aging of the ACA joint showed that a thermal strain of 0.004 and a hygroscopic strain of 0.0052 were present and resulted in a fatigue like process. In-vitro tests showed that high temperature and acidity had a deleterious effect of the ACA and its joint. It also showed that the ACA contact joints positioned at around or over 1mm would survive the gastrointestinal (GI) fluids and would be able to provide a reliable contact during the entire 72hr of the GI transit time. A final capsule demonstrator was achieved by successfully integrating the DAS, the battery and the final foldable circuitry into a glycerine capsule. Final capsule soak tests suggested that the silicone encapsulated system could survive the 72hr gut transition.

The capacities of institutions for the integration of ecosystem services in coastal strategic planning: The case of Jiaozhou Bay

This paper explains how the practice of integrating ecosystem-service thinking (i.e., ecological benefits for human beings) and institutions (i.e., organisations, policy rules) is essential for coastal spatial planning. Adopting an integrated perspective on ecosystem services (ESs) both helps understand a wide range of possible services and, at the same time, attune institution to local resource patterns. The objective of this paper is to identify the extent to which ESs are integrated in a specific coastal strategic planning case. A subsequent objective is to understand whether institutions are capable of managing ESs in terms of uncovering institutional strengths and weaknesses that may exist in taking ESs into account in existing institutional practices. These two questions are addressed through the application of a content analysis method and a multi-level analysis framework on formal institutions. Jiaozhou Bay in China is used as an illustrative case. The results show that some ESs have been implicitly acknowledged, but by no means the whole range. This partial ES implementation could result from any of four institutional weaknesses in the strategic plans of Jiaozhou Bay, namely a dominant market oriented interest, fragmented institutional structures for managing ESs, limited ES assessment, and a lack of integrated reflection of the social value of ESs in decision-making. Finally, generalizations of multi-level institutional settings on ES integration, such as an inter-organisational fragmentation and a limited use of ES assessment in operation, are made together with other international case studies. Meanwhile, the comparison highlights the influences of extensive market-oriented incentives and governments' exclusive responsibilities on ES governance in the Chinese context.

Financial media, globalisation, and China’s economic integration: comparing narrative construction of the Economist and Caijing

In June 2015, legal frameworks of the Asian Infrastructural Investment Bank were signed by its 57 founding members. Proposed and initiated by China, this multilateral development bank is considered to be an Asian counterpart to break the monopoly of the World Bank and the International Monetary Fund. In October 2015, China’s Central Bank announced a benchmark interest rate cut to combat the economic slowdown. The easing policy coincides with the European Central Bank’s announcement of doubts over US Fed’s commitment to raise interest rates. Global stock markets responded positively to China’s move, with the exception of the indexes from Wall Street (Bland, 2015; Elliott, 2015). In the meantime, China’s ‘One Belt, One Road’ (or New Silk Road Economic Belt) became atopic of discourse in relation to its growing global economy, as China pledged $40 billion to trade and infrastructure projects (Bermingham, 2015). The foreign policy aims to reinforce the economic belt from western China through Central Asia towards Europe, as well as to construct maritime trading routes from coastal China through the South China Sea (Summers, 2015). In 2012, The Economist launched a new China section, to reveal the complexity of the‘meteoric rise’ of China. John Micklethwait, who was then the chief editor of the magazine, said that China’s emergence as a global power justified giving it a section of its own(Roush, 2012). In July 2015, Hu Shuli, the former chief editor of Caijing, announced the launch of a think tank and financial data service division called Caixin Insight Group, which encompasses the new Caixin China Purchasing Managers Index (PMI). Incooperation with with Markit Group, a principal global provider of PMI, the index soon became a widely cited economic indicator. One anecdote from November’s Caixin shows how much has changed: in a high-profile dialogue between Hu Shuli and Kevin Rudd, Hu insisted on asking questions in English; interestingly, the former Prime Minister of Australia insisted on replying in Chinese. These recent developments point to one thing: the economic ascent of China and its increasing influence on the power play between economics and politics in world markets. China has begun to take a more active role in rule making and enforcement under neoliberal frameworks. However, due to the country’s size and the scale of its economy in comparison to other countries, China’s version of globalisation has unique characteristics. The ‘Capitalist-socialist’ paradox is vital to China’s market-oriented transformation. In order to comprehend how such unique features are articulated and understood, there are several questions worth investigating in the realms of media and communication studies,such as how China’s neoliberal restructuring is portrayed and perceived by different types of interested parties, and how these portrayals are de-contextualised and re-contextualised in global or Anglo-American narratives. Therefore, based on a combination of the themes of globalisation, financial media and China’s economic integration, this thesis attempts to explore how financial media construct the narratives of China’s economic globalisation through the deployment of comparative and multi-disciplinary approaches. Two outstanding elite financial magazines, Britain’s The Economist, which has a global readership and influence, and Caijing, China’s leading financial magazine, are chosen as case studies to exemplify differing media discourses, representing, respectively, Anglo-American and Chinese socio-economic and political backgrounds, as well as their own journalistic cultures. This thesis tries to answer the questions of how and why China’s neoliberal restructuring is constructed from a globally-oriented perspective. The construction primarily involves people who are influential in business and policymaking. Hence, the analysis falls into the paradigm of elite-elite communication, which is an important but relatively less developed perspective in studying China and its globalisation. The comparing of characteristics of narrative construction are the result of the textual analysis of articles published over a ten-year period (mid-1998 to mid-2008). The corpus of samples come from the two media outlets’ coverage of three selected events:China becoming a member of the World Trade Organization, its outward direct investment, and the listing of stocks of Chinese companies in overseas exchanges, which are mutually exclusive in sample collection and collectively exhaustive in the inclusion of articles regarding China’s economic globalisation. The findings help to understand that, despite language, socio-economic and political differences, elite financial media with globally-oriented readerships share similar methods of and approaches to agenda setting, the evaluation of news prominence, the selection of frame, and the advocacy of deeply rooted neoliberal ideas. The comparison of their distinctive features reflects the different phases of building up the sense of identity in their readers as global elites, as well as the different economic interests that are aligned with the corresponding readerships. However, textual analysis is only relevant in terms of exploring how the narratives are constructed and the elements they include; textual analysis alone prevents us from seeing the obstacles and the constrains of the journalistic practices of construction. Therefore, this thesis provides a brief discussion of interviews with practitioners from the two media, in order to understand how similar or different narratives are manifested and perceived, how the concept of neoliberalism deviates from and is justified in the Chinese context, and how and for what purpose deviations arise from Western to Chinese contexts. The thesis also contributes to defining financial media in the domain of elite communication. The relevant and closely interlocking concepts of globalisation, elitism and neoliberalism are discussed, and are used as a theoretical bedrock in the analysis of texts and contexts. It is important to address the agenda-setting and ideological role of elite financial media, because of its narrative formula of infusing business facts with opinions,which is important in constructing the global elite identity as well as influencing neoliberal policy-making. On the other hand, ‘journalistic professionalism’ has been redefined, in that the elite identity is shared by the content producer, reader and the actors in the news stories emerging from the much-compressed news cycle. The professionalism of elite financial media requires a dual definition, that of being professional in the understanding of business facts and statistics, and that of being professional in the making sense of stories by deploying economic logic.

The Causal Links between FDI and Economic Growth in Developing Countries: A Case Study of the Republic of Rwanda

The study examines the short-run and long-run causality running from real economic growth to real foreign direct investment inflows (RFDI). Other variables such as education (involving combination of primary, secondary and tertiary enrolment as a proxy to education), real development finance, unskilled labour, to real RFDI inflows are included in the study. The time series data covering the period of 1983 -2013 are examined. First, I applied Augmented Dicky-Fuller (ADF) technique to test for unit root in variables. Findings shows all variables integrated of order one [I(1)]. Thereafter, Johansen Co-integration Test (JCT) was conducted to establish the relationship among variables. Both trace and maximum Eigen value at 5% level of significance indicate 3 co-integrated equations. Vector error correction method (VECM) was applied to capture short and long-run causality running from education, economic growth, real development finance, and unskilled labour to real foreign direct investment inflows in the Republic of Rwanda. Findings shows no short-run causality running from education, real development finance, real GDP and unskilled labour to real FDI inflows, however there were existence of long-run causality. This can be interpreted that, in the short-run; education, development finance, finance and economic growth does not influence inflows of foreign direct investment in Rwanda; but it does in long-run. From the policy perspective, the Republic of Rwanda should focus more on long term goal of investing in education to improve human capital, undertake policy reforms that promotes economic growth, in addition to promoting good governance to attract development finance – especially from Nordics countries (particularly Norway and Denmark).

Shame, Dissociation, and Complex PTSD Symptoms in Traumatized Psychiatric and Control Groups: Direct and Indirect Associations With Relationship Distress

Objectives: Elevated shame and dissociation are common in dissociative identity disorder (DID) and chronic posttraumatic stress disorder (PTSD) and are part of the constellation of symptoms defined as complex PTSD. Previous work examined the relationship between shame, dissociation, and complex PTSD and whether they are associated with intimate relationship anxiety, relationship depression, and fear of relationships. This study investigated these variables in traumatized clinical samples and a nonclinical community group.

Method: Participants were drawn from the DID (n = 20), conflict-related chronic PTSD (n = 65), and nonclinical (n = 125) populations and completed questionnaires assessing the variables of interest. A model examining the direct impact of shame and dissociation on relationship functioning, and their indirect effect via complex PTSD symptoms, was tested through path analysis.

Results: The DID sample reported significantly higher dissociation, shame, complex PTSD symptom severity, relationship anxiety, relationship depression, and fear of relationships than the other two samples. Support was found for the proposed model, with shame directly affecting relationship anxiety and fear of relationships, and pathological dissociation directly affecting relationship anxiety and relationship depression. The indirect effect of shame and dissociation via complex PTSD symptom severity was evident on all relationship variables.

Conclusion: Shame and pathological dissociation are important for not only the effect they have on the development of other complex PTSD symptoms, but also their direct and indirect effects on distress associated with relationships.

Direct spun aligned carbon nanotube web-reinforced proton exchange membranes for fuel cells

A new method combining electrospinning of SPEEK and direct spinning of CNT forests has been used to prepare sulfonated poly(ether ether ketone) (SPEEK)/directly spinnable carbon nanotube (dsCNT) composite proton exchange membranes. The SPEEK/dsCNT membrane is more robust than SPEEK alone, and in a fuel cell significantly outperforms both SPEEK and the commercial Nafion 212 membranes.