Determinação de temperatura de chamas por espectroscopia de espécies quimioluminescentes

In a combustion process involving fossil fuels, there is the formation of species Chemiluminescent, especially CH*, C2* and OH*, whose spontaneous emission can be used as a diagnostic tool. In the present work, mapping and determination of the rotational temperature of the species CH* produced in flames on a burner fueled by Liquefied Petroleum Gas (LPG) was carried out. This study is part of a project involving the characterization of supersonic combustion in scramjets engines, whose study has been conducted in the hypersonic shock tunnel IEAv laboratories. The technique used was the natural emission spectroscopy, which has as main advantage of being non-intrusive. The rotational temperature determination was made using the Boltzmann method, whose principle is to relate the emission intensity of the species to the temperature by means of spectroscopic constants established.The temperature values were determined from the analysis of electronic bands AX and BX of the radical CH*. In order to confirm the results of flame temperatures obtained by the natural emission technique, was also used the technique of line reversal sodium. The results of both techniques showed that the temperature of the flames investigated is about 2500K a 2700K

Estudo para determinação da kVp em equipamentos de raios X convencional

The quality assurance control program (QACP) in clinical radiology is very important to acquire, image quality, patient dose reduction and cost for the institution. The verification of the real tension on the x ray tube, it is one of many parameters that may be determined on a QACP. This act on image quality as absorbed dose in patient. Once proved the importance of this fact, this study come up with the determination of tension to any X ray tube used on medical routine, on quick, safe and low cost manner. To reach the aim of this study, the methodology consisted on measuring expose rates (ER) using different thicknesses of copper (Cu) plates like filters and relating these results with Half Layer Value (HLV). Afterwards, the HLV was associated to real tension that was acquired with kilo voltage of peak (kVp) measurers used on clinical routine. So walking in this path, when performed the ER, on any X ray tube, it’s possible acquire the HLV and consequently the real kVp, considering measures obtained before, on the methodology of kVp estimative development

Determinação de metais pesados no caranguejo comestível Ucides cordatus (Crustacea: Decapoda)

Não disponível

Determinação dos tipos de resistência de genótipos de soja ao ataque de Spodoptera cosmioides (Walker, 1858) (Lepdoptera: Noctuidae)

The aim of this work was to evaluate the types of resistance of soybean genotypes to the attack of Spodoptera cosmioides (Walker, 1858), under laboratory conditions. Plants of the soybean genotypes, IAC 100, Dowling, PI 227687, PI 274454, BR 16, IGRA RA 626 RR, PI 227682, BRSGO 8360, IGRA RA 516 RR e P 98Y11 RR, were cultivated in vases and placed in a greenhouse in order to have their leaves used afterwards in free-choice and no-choice no-preference for feeding tests and evaluation of the biological parameters of S. cosmioides fed on the genotypes. For free-choice no preference for feeding test, 10 leaf discs were prepared and placed in Petri dishes equidistantly among themselves, and then two recently-hatched caterpillar per genotype were release in the center of the plate. The same test was performed for third instar larvae, so that one caterpillar per genotype was used. In non-choice test, only one genotype was used in each Petri dish, where two recently-hatched or one third instar caterpillars were released, respectively. For both tests, the attractiveness was assessed at 1, 3, 5, 10, 15, 30, 60, 120, 360, 720 and 1440 minutes after the release of the insects. In addition, the leaf area consumed was evaluated. Randomized blocks design and completely randomized design were used for free-choice and non-choice tests, respectively, with 10 replications. In biology test, recently-hatched larvae were transferred to Petri dishes with leaves of the genotypes, evaluating the period of larvae, pupae and overall (larvae + pupae), viability of larvae, pupae and overall, weight of 12 days-old larvae and 24 hours-old pupae and longevity of the adults. Completely randomized design was used for this test, with 30 replications. Genotypes IGRA RA 516 RR and IGRA RA 626 RR were the least and the most consumed by recently-hatched larvae of S. cosmioides, respectively, in non-choice non-preference for feeding test. Genotypes PI 274454 and PI 227687 were...

Desenvolvimento de métodos analíticos para determinação de fósforo e selênio em amostras biológicas

A determinação de fósforo em amostras de rações e fezes de peixes por espectrometria no visível e de selênio em amostras vegetais de cultura orgânica por espectrometria de absorção atômica em forno de grafite (GFAAS) representa o foco principal do trabalho desenvolvido. O fósforo e o selênio são macro e micronutrientes importantes para a nutrição vegetal e animal, no entanto, se utilizados sem um controle adequado podem poluir o solo e os recursos hídricos, atingindo todo o meio ambiente. Dessa forma, foram desenvolvidos métodos para extração dos analitos que diminuíram significativamente os resíduos químicos produzidos nas determinações de rotina feitas na área de nutrição de plantas e de piscicultura. No caso do fósforo foram otimizados parâmetros físico-químicos para extração desse elemento por ultra-som e posterior quantificação por espectrofotometria no visível. No caso do selênio foram otimizados parâmetros físico-químicos para amostragem em suspensão (slurry) e determinação direta por GFAAS. Os principais parâmetros físico-químicos avaliados e otimizados foram: granulometria da amostra sólida, tempo e potência de sonificação, soluções extratoras, agentes surfactantes para estabilização do slurry; temperatura de pirólise e atomização, tipos de modificadores químicos e volume de amostragem nas determinações de selênio por GFAAS e tempo de reação e relação ao agente cromogênico/volume de amostra nas determinações espectrofotométricas de fósforo. O método de extração por ultra-som foi aplicado na determinação de fósforo biodisponível em amostras de rações de peixes e o método de amostragem em suspensão para a determinação de selênio em amostras de vegetais orgânicos

Determinação de manganêsem águas no entorno de minerações de urânio

The studies of this work aimed to determine the labile fractions of manganese (Mn) in natural and drainage water samples collected around the Osamu Utsumi uranium mine, located in the municipality of Caldas, south-central region of Poços de Caldas- MG, using the technique of diffusion gradient in thin films (DGT). The DGT devices were mounted with Chelex-100 resin, polyacrylamide-agarose hydrogel (conventional porosity) and cellulose acetate membrane. The device were deployed up to 48 hours in six water samples collected from different areas around the uranium mine (075, 076, 022-E, 025-E, 014, and 041). The DGT devices immersed in each sample were gradually removed after 4, 8, 12, 24 and 48 hours. The pH of the samples ranged from 3.0 to 10.5, which influenced the lability and the sampling of the analyte by the Chelex-100 resin. The results showed a linear relationship between accumulated mass and sampling time (immersion curve) for samples 014 and 025-E (pH between 6 and 8) suggesting the ability of the DGT technique for sampling the analyte. The results obtained for samples 075 and 076 (pH<5) and samples 041 and 022-E (pH around 10) were characterized by nonlinear relationships. The values obtained by DGT were compared with Solid Phase Extraction (SPE) technique using Chelex-100. For samples 014 and 025-E, there was a good agreement between the results obtained by both techniques

Desenvolvimento de metodologias analíticas para determinação de selênio, cobre e manganês por GFAAS em amostras de vegetais de cultura orgânica e convencional utilizando extração por ultra-som

No presente trabalho é proposto um método para determinação de cobre, manganês e selênio em amostras de vegetais de cultura orgânica e convencional utilizando ultra-som no processo de extração dos analitos e posterior quantificação por espectrometria de absorção atômica em forno de grafite (GFAAS). Utilizando como solução extratora HCl 0,10 mol L-1, as condições ótimas de extração estabelecidas foram: massa de amostra de 100 mg; granulometria da amostra < 60 m; tempo de sonificação de cinco ciclos de 40 s e potência de sonificação de 136 W. As determinações dos analitos por GFAAS foram feitas utilizando-se temperaturas de secagem de 90-250 oC, temperatura de pirólise de 1300 oC, temperatura de atomização de 2300 oC e temperatura de limpeza de 2800 oC. Foi utilizado como modificador químico nitrato de paládio co-injetado junto com as amostras e tungstênio como modificador permanente. A exatidão e precisão do método de extração proposto foram avaliadas utilizando-se padrão certificado Corn Bran, RM 8433 – National Institute of Standards and Technology. Os resultados obtidos pelo método de extração por ultra-som mostraram-se equivalentes aos obtidos pelo método utilizando-se mineralização ácida das amostras em forno de microondas. No entanto, a metodologia proposta diminui consideravelmente o tempo de análise, o que favorece a velocidade analítica. Além disso, a quantidade de resíduos gerados para o ambiente também é bastante minimizada

Determinação de complexos de urânio em solo usando a técnica de difusão em filmes finos por gradiente de concentração (DGT)

This paper proposes to assess the lability of complexes of uranium in soil using the technique of Diffusion in Thin Films by concentration gradients (DGT) in the vicinity the Osamu Utsumi mine, located in the municipality of Caldas - MG. The technique is based on the 1ª Fick Law, where metal complexes diffuse through a gel, which in turn is adsorbed on a resin. The metals adsorbed are recovered by an analytical technique and quantified by optical emission spectrometer with plasma inductively coupled (ICP-OES) or mass spectrometry with inductively coupled plasma (ICP-MS)

Determinação de Cd, Cu, Ni, Pb e Zn em águas marinhas oriundas da Bacia Potiguar utilizando a técnica de difusão em filmes finos por gradiente de concentração (DGT)

The DGT technique has been used to determine and better understand the dynamics and bioavailability of metals in the sea near to marine outfalls. In this work, the DGT was assessed for the determination of Cd, Pb, Cu, Zn and Ni in marine water samples from Potiguar Basin in its conventional aspect (binding agent, Chelex-100 and diffusive agent: Diffusive polyacrylamide gel (D) and restrictive (R)) and determination of Pb and Cd through its alternative aspect (binding agent: Saccharomyces cerevisiae immobilized in agarose gels and diffusive agent: 3MM Chromatography Paper). The deployment curves for long periods of immersion in the sample, showed a good linear correlation for the conventional aspect to Zn (D: R²=0.9586, R: R²=0.9444), Ni (D: R²=0.9789, R: R²=0.9286) and Cu (D: R²=0.764, R: R²=0.8143), and alternative to Pb (R²=0.9228) and Cd (R²=0.9673). The results of the organic and inorganic composition analysis in conventional aspect, showed that for every element there is no significant fraction of organic compounds in the sample. In addition, considering the alternative aspect, the comparison of obtained and expected masses suggests that some of the Pb is not labile and that the main retention mechanism of Pb for S. Cerevisiae occurs through ion exchange

Efeito do exercício prévio na determinação da potência crítica

The objective of this study was to analyze the influence of previous exercise on the determination of critical power (CP). Seven apparently healthy nontrained males, of 18 to 25 years, participated of this study. The subjects were submitted, in different days to the following protocols in a cyclergometer: 1) one progressive test until voluntary exhaustion for the determination of lactate threshold (LL), maximal oxygen uptake (VO2max) and its corresponding intensity (IVO2max); 2) six constant workload tests at 95,100 and 110% IVO2max until exhaustion with and without a previous exercise at 70% , in random order. The exhaustion times (tlim) at 95, 100 and 110% IVO2max were adjusted forme thress models of two parameters to estimate CP and anaerobic work capacity (AWC) [P=CTAn/tlim)+CP; tlim = CTAn/(P-PC); P=PC.tlim+ CTAn]. The model with the lowest standard error was considered for the estimation of CP. The tlim at 95% IVO2max was similar without (501 ± 140 s) and with previous exercise (473 ± 99 s). However, the tlim at 100% (381 ± 103 s and 334 ± 101 s) and 110% IVO2max (267 ± 163 s and 227 ± 68 s) was significantly longer with previous exercise. There was no significant difference in CP and AWCat conditions without (200 ± 27 W and 23 ± 11 kJ, respectively) and with previous exercise (212 ± 30 W and 18 ± 8 kJ, respectively). It can be concluded that the parameters of the relationship between power and time were not modified by the previous severe exercise

Análise Isotópica de Carbono-13 e Nitrogênio-15 da Ipomoea violacea para Determinação de sua Origem Geográfica

Along the Earth globe we can find many types of psychoactive plants. Among them is the Ipomoea violacea, popularly known as Morning Glory. There are ergotalkaloids producer associated-fungus in its leaves and seeds. One of these alkaloids that can be found is the ergine (or LSA), a homologous substance of the lysergic acid diethylamide (LSD). There are many discussions around the world about the inclusion of LSA in the list of controlled substances. In Brazil, this was recently prohibited. One of the most important point of view in the study of isotopic composition of 13C and 15N of this plant is the fact that there is a total alkaloid variation in function of its geographic origin like was verified in 1960’s, besides to aggregate knowledge about it. This work was made to verify if the isotopic ratio can be used as a tool in tracing this illegal Brazilian plant. We could conclude that this plant presents a C3 photosynthetic pathway, its parts has different isotopic carbon and nitrogen composition and that stable isotope analysis can be successfully used as a tool to detect its geographic origin

Sistema de cálculo para determinação do tempo de exposição em radioterapia veterinária

Radiotherapy in veterinary practice is already known and widely distributed in large specialized centers of developed countries. In early 2000, there were about 30 radiotherapy equipment specifically designed for the veterinary clinic in the United States. In Brazil, the veterinary radiotherapy is still confined to research in universities, where most of the procedures is radiation therapy performed with superficial x-ray machines, with a voltage between 50 and 150 kVp, focus-distance surface (DFS) between 20,0cm and 40,0cm. As that occurs in human medicine, new research strengthens the development and prospects for the use of radiotherapy as a safe option for treating cancer in animals. This paper presents a methodology for calculating the exposure time for superficial radiotherapy procedures in veterinary medicine for small animals (dogs and cats). The dosimetric parameters of X-rays are determined using a spreadsheet tool for Microsoft Office Excel, developed in this paper for a device Dermopan 2, Veterinary Hospital of UNESP in Araçatuba. Using the worksheet helps the veterinarian to determine the time of exposure to radiation determined for each clinical case, optimize the workflow for professionals in veterinary radiotherapy procedures, which often lack the medical physics in team and at the time of radiotherapy. The correct use of spreadsheet decreases the chances of errors in dose rates of radiation, providing a higher quality of care

Comparação das técnicas semi-quantitativa e quantitativa nas infecções relacionadas a cateter em neonatos e determinação da resistência à oxacilina nos Staphylococcus spp

Study the semi-quantitative and quantitative technique in the diagnosis of catheter-related infections in newborns and to determine oxacillin resistance in Staphylococcus isolated. It was analyzed 353 catheter tips from 273 newborns in the Neonatal Unit of Hospital FMB. To confirm the diagnosis of infection, were analyzed the clinical data of newborns, the presence of at least one positive blood culture and growth of ≥ 1000 CFU/mL on quantitative culture and/or ³15 UFC on semiquantitative culture, with the same microorganism isolation (species and drug sensitivity) in blood culture and no other focus of infection except the catheter. The disk diffusion technique was used to check similarity of strains and resistance to oxacillin. Of the 353 tips analyzed, 39 were included in this study as the inclusion criteria. The semiquantitative culture was positive in 26 (66.7%) catheters and quantitative culture was positive in 24 (61.5%). Of 273 patients, 19 (6.9%) had a diagnosis of catheter-related bloodstream Infection (CR-BSI). Of the 19 episodes of CR-BSI, S. epidermidis was the predominant etiological agent (84.2%). The resistance to the antibiotic methicillin was found in 14 (73.7%) strains of Staphylococcus. The semiquantitative method was more sensitive (79%) compared with the quantitative method (63%). The use of antibiotics may have influenced the sensitivity of the quantitative method as the microorganisms present in the lumen are exposed to higher concentrations of antibiotics administered via the catheter

Radioterapia em câncer de mama: importância da determinação da curva de isodose

The study analyzed contours of the thoracic region of patients undergoing radiotherapy of breast tumors in Hospital Manuel de Abreu of Bauru (institution 1) and the Hospital da Faculdade de Medicina of Botucatu (Institution 2). Were prepared isodose curves corresponding to the contours of the patient, which were presented for radiotherapists doctors both hospital services that enabled the choice of the curve isodose that provides the best distribution of radiation dose in the irradiated volume. Some boundaries were digitized in one institution and sent for preparation of isodose lines in the institution 2, both curves plotted in each of the institutions and for the same contour, were compared, showing that the methodology of Curves of distance is feasible and reliable, while optimizing the routine procedures regarding the handling of isodose plans provided by different radiation equipment. It compares the calculation of the exposure time determined using the isodose curve selected by calculating the value obtained considering the PDP at the point of the middle line of separation between the internal and external fields, the difference between the two methods for determining exposure time was around 2.4%. A study on the angle of the radiation beam at the input field (region breast-air) was conducted showing that, once known a tangent angle of the input beam, one can estimate the angle of the wedge filter used in some procedures for uniformity of dose within the irradiated volume compensation and the lack of tissue in the treatment volume. A comparative study between the isodose curves produced manually with the curves obtained in a two-dimensional computer system, the computer system showed that provides further information regarding the dose gradient within the irradiated volume, in addition to reducing the time spent in preparing the curves isodose

Determinação da crítica razão esforço pausa (e:pcrit) em uchi-komi no judô, utilizando deltas de variação de freqüência cardíaca e escala de percepção de esforço de Borg

O presente estudo objetivou verificar a validade de um protocolo de teste aeróbio específico do judô (técnica ipon-seoi-nague), não exaustivo, adaptado do método de CHASSAIN (1986), utilizando deltas de variações da escala de percepção de Borg e da freqüência cardíaca em atletas bem treinados. O teste adaptado ao judô constituiu de quatro séries de exercício com dois esforços iguais (duplos) de 180 segundos com um intervalo de 90 segundos entre eles. As séries de exercícios foram realizadas em dias consecutivos. As intensidades dos testes duplos foram de 85%, 95%,105% e 115% do lactato mínimo para cada participante. Este trabalho utilizou a técnica ipon-seoi-nague, sendo que as razões esforço-pausa foram específicas para cada atleta, e correspondem às intensidades de exercício propostas pelo protocolo de Chassain (1986). A escala de percepção de esforço de Borg foi mostrada ao final do primeiro e do segundo esforços, em cada uma das séries, para que o atleta determinasse o nível de cansaço. Para análise da freqüência cardíaca foi utilizado um freqüencímetro, Polar Vantage NV, obtendo freqüência cardíaca concomitantemente a escala de Borg, ao final de bloco de esforço. Dessa maneira, foram obtidos dois deltas de variações entre o primeiro e o segundo esforços, para escala de percepção de Borg (ΔBORG) e FC (ΔFC). Uma vez que foram utilizadas quatro intensidades, foi possível determinar quatro ΔBORG e quatro ΔFC. Assim, a partir de duas regressões lineares (uma para o Borg e outra para a FC), foi possível determinar as razões esforço:pausas críticas do exercício na técnica específica do Judô, a partir da determinação das intensidades nas quais a variação de Borg e da FC foi igual a zero (ΔBORG=0 e ΔFC=0). Para validar esses procedimentos adaptados de Chassain (1986) ao Judô, foi realizado o teste de Lactato Mínimo Adaptado, conforme sugerido por Azevedo (2002).