Dynamic Deflections for Determining Structural Rating of Flexible Pavements, HR-178, 1979

The Road Rater is a dynamic deflection measuring apparatus for flexible base pavements. The Road Rater replaces the Benkelman Beam which was last used by the Iowa DOT in 1977. Road Rater test results correlate reasonably well (correlation coefficient = 0.83) with Benkelman Beam test data. The basic differences between the Road Rater and Benkelman Beam are as follows: 1. The Benkelman Beam uses a static 18,000 lb. load while the Road Rater uses a dynamic 800 to 2,000 lb. loading. 2. The Road Rater tests much faster and more economically than the Benkelman Beam. 3. The Road Rater better simulates a moving truck than the Benkelman Beam. The basic operating principle of the Road Rater is to impart a dynamic loading and measure the resultant movement of the pavement with velocity sensors. This data, when properly adjusted for temperature by use of a nomograph included in this report, can be used to determine pavement life expectancy and estimate overlay thickness required. Road Rater testing will be conducted in the spring, when pavements are in their weakest condition, until seasonal correction factors can be developed. The Road Rater does not have sufficient ram weight to effectively evaluate load carrying capacity of rigid pavements. All rigid pavements react similarly to Road Rater testing and generally deflect from 0.65 to 1.30 mils. Research will be contined to evaluate rigid pavements with the Road Rater, however. The Road Rater has proven to be a reliable, troublefree pavement evaluation machine. The deflection apparatus was originally front-mounted,but was rear-mounted during the winter of 1977-78. Since that time, van handling has greatly improved, and front suspension parts are no longer overstressed due to improper weight distribution.

Use of a dynamic foot pressure index to monitor the effects of treatment for equinus gait in children with cerebral palsy.

The purpose of this study is to introduce and describe a newly developed index using foot pressure analysis to quantify the degree of equinus gait in children with cerebral palsy before and after injection with botulinum toxin. Data were captured preinjection and 12 weeks postinjection. Ten children aged 2(1/2) to 6(1/2) years took part (5 boys and 5 girls). Three of them had a diagnosis of spastic diplegia and 7 of congenital hemiplegia. In total, 13 limbs were analyzed. After orientation and segmentation of raw pedobarographic data, we determined a dynamic foot pressure index graded 0 to 100 that quantified the relative degree of heel and forefoot contact during stance. These data were correlated (Pearson correlation) with clinical measurements of dorsiflexion at the ankle (on a slow and fast stretch) and video observation (using the Observational Gait Scale). Pedobarograph data were strongly correlated with both the Observational Gait Scale scores (R = 0.79, P < 0.005) and clinical measurements of dorsiflexion on a fast stretch, which is reflective of spasticity (R = 0.70, P < 0.005). We demonstrated the index's sensitivity in detecting changes in spasticity and good correlation with video observations seems to indicate this technique's potential validity. When manipulated and segmented appropriately, and with the development of a simple ordinal index, we found that foot pressure data provided a useful tool in tracking changes in patients with spastic equinus.

Development of Asphalt Dynamic Modulus Master Curve Using Falling Weight Deflectometer Measurements, TR-659

The asphalt concrete (AC) dynamic modulus (|E*|) is a key design parameter in mechanistic-based pavement design methodologies such as the American Association of State Highway and Transportation Officials (AASHTO) MEPDG/Pavement-ME Design. The objective of this feasibility study was to develop frameworks for predicting the AC |E*| master curve from falling weight deflectometer (FWD) deflection-time history data collected by the Iowa Department of Transportation (Iowa DOT). A neural networks (NN) methodology was developed based on a synthetically generated viscoelastic forward solutions database to predict AC relaxation modulus (E(t)) master curve coefficients from FWD deflection-time history data. According to the theory of viscoelasticity, if AC relaxation modulus, E(t), is known, |E*| can be calculated (and vice versa) through numerical inter-conversion procedures. Several case studies focusing on full-depth AC pavements were conducted to isolate potential backcalculation issues that are only related to the modulus master curve of the AC layer. For the proof-of-concept demonstration, a comprehensive full-depth AC analysis was carried out through 10,000 batch simulations using a viscoelastic forward analysis program. Anomalies were detected in the comprehensive raw synthetic database and were eliminated through imposition of certain constraints involving the sigmoid master curve coefficients. The surrogate forward modeling results showed that NNs are able to predict deflection-time histories from E(t) master curve coefficients and other layer properties very well. The NN inverse modeling results demonstrated the potential of NNs to backcalculate the E(t) master curve coefficients from single-drop FWD deflection-time history data, although the current prediction accuracies are not sufficient to recommend these models for practical implementation. Considering the complex nature of the problem investigated with many uncertainties involved, including the possible presence of dynamics during FWD testing (related to the presence and depth of stiff layer, inertial and wave propagation effects, etc.), the limitations of current FWD technology (integration errors, truncation issues, etc.), and the need for a rapid and simplified approach for routine implementation, future research recommendations have been provided making a strong case for an expanded research study.

A Smartphone-Based Prototype System for Incident/Work Zone Management Driven by Crowd-Sourced Data, 2015

This project develops a smartphone-based prototype system that supplements the 511 system to improve its dynamic traffic routing service to state highway users under non-recurrent congestion. This system will save considerable time to provide crucial traffic information and en-route assistance to travelers for them to avoid being trapped in traffic congestion due to accidents, work zones, hazards, or special events. It also creates a feedback loop between travelers and responsible agencies that enable the state to effectively collect, fuse, and analyze crowd-sourced data for next-gen transportation planning and management. This project can result in substantial economic savings (e.g. less traffic congestion, reduced fuel wastage and emissions) and safety benefits for the freight industry and society due to better dissemination of real-time traffic information by highway users. Such benefits will increase significantly in future with the expected increase in freight traffic on the network. The proposed system also has the flexibility to be integrated with various transportation management modules to assist state agencies to improve transportation services and daily operations.

Improved Methods for Determining Wind Loads on Highway Sign and Traffic-Signal Structures, TR-559, 2007

The main objective of the proposed study is to use Computational Fluid Dynamics (CFD) tools to determine the wind loads by accurate numerical simulations of air flow characteristics around large highway sign structures under severe wind speeds conditions. Fully three-dimensional Reynolds- Averaged Navier-Stokes (RANS) simulations are used to estimate the total force on different panels, as well as the actual pressure distribution on the front and back faces of the panels. In particular, the present study investigates the effects of aspect ratio and sign spacing for regular panels, the effect of sign depth for the dynamic message signs that are now being used on Iowa highways, the effect induced by the presence of back-to-back signs, the effect of the presence of add-on exit signs, and the effect of the presence of trucks underneath the signs potentially creating “wind tunnel” effect.

Development of LRFD Design Procedures for Bridge Piles in Iowa – Field Testing of Steel H-Piles in Clay, Sand, and Mixed Soils and Data Analysis (Volume II), TR-583, 2011

In response to the mandate on Load and Resistance Factor Design (LRFD) implementations by the Federal Highway Administration (FHWA) on all new bridge projects initiated after October 1, 2007, the Iowa Highway Research Board (IHRB) sponsored these research projects to develop regional LRFD recommendations. The LRFD development was performed using the Iowa Department of Transportation (DOT) Pile Load Test database (PILOT). To increase the data points for LRFD development, develop LRFD recommendations for dynamic methods, and validate the results of LRFD calibration, 10 full-scale field tests on the most commonly used steel H-piles (e.g., HP 10 x 42) were conducted throughout Iowa. Detailed in situ soil investigations were carried out, push-in pressure cells were installed, and laboratory soil tests were performed. Pile responses during driving, at the end of driving (EOD), and at re-strikes were monitored using the Pile Driving Analyzer (PDA), following with the CAse Pile Wave Analysis Program (CAPWAP) analysis. The hammer blow counts were recorded for Wave Equation Analysis Program (WEAP) and dynamic formulas. Static load tests (SLTs) were performed and the pile capacities were determined based on the Davisson’s criteria. The extensive experimental research studies generated important data for analytical and computational investigations. The SLT measured load-displacements were compared with the simulated results obtained using a model of the TZPILE program and using the modified borehole shear test method. Two analytical pile setup quantification methods, in terms of soil properties, were developed and validated. A new calibration procedure was developed to incorporate pile setup into LRFD.

Signalling pathways in skin homeostasis

SUMMARY The results presented here contribute to a better understanding of the crucial molecular relationships and signalling cues exchanged by several fundamental cell types (epidermal keratinocytes, dermal fibroblasts, immune and endothelial cells) of the skin. Importantly we provide evidence to directly implicate Wnt/ß-catenin signalling as a putative player in different cell types (keratinocytes and neutrophils) in mediation of the cutaneous inflammatory response (Fart A). Finally we highlight the importance of several molecules, specifically expressed in the hair follicle stem cell niche to the morphogenesis and homeostasis of the hair follicle (Part B). PART A Currently the body of work pertaining to Wnt signalling and immune cells largely focuses on Wnt signalling in the development of these cells. The data presented here suggests a novel mechanism in which Wnt signalling appears to modulate immune cell recruitment to the skin. Keratinocytes are major contributors to early inflammatory responses by the release of chemokines which recruit immune cells. The resultant inflammatory response is a dynamic process of sequentially infiltrating immune cells governed by a network of growth factors, chemokines and cytokines. In wild type mice the response is typified by a rapid and substantial infiltration of neutrophils followed at later time points by macrophages and Tcells. The expression of the canonical Wnt pathway activating ligand, Wnt3a, is able to induce a strong neutrophil infiltration in the dermis. This response originates in keratinocytes, as it is abrogated upon keratinocyte-specific ablation of ß-catenin. Notably, this suggests that the crucial cross talk between these resident cells and recruited immune cells is, in part, mediated by Wnt signalling. In corroboration of this role of Wnt-mediated recruitment of neutrophils, expression of the Wnt inhibitory ligand sFRPI during acute inflammation results in a dramatic 'dampening' of immune cell infiltration in particular of neutrophil chemoattraction. Importantly, an intrinsic Wnt signalling pathway is essential for neutrophil chemoattraction in response to inflammatory stimuli. There is a marked reduction of neutrophil infiltration in mice grafted with a ß-catenin deficient bone marrow upon TPA induced cutaneous inflammation. Additionally, neutrophils lacking Wnt/ß-catenin fail to respond to IFNγ, an early inflammatory cue, in vitro. In combination, these data indicate a potent function of Wnt signalling in immune cell recruitment and the modulation of the inflammatory response. PART B Tissue specific stem cells form the cellular base on which tissue homeostasis and repair of adult tissue relies. The maintenance of this stem cell pool is highly dependent on the immediate environment or niche. We have identified three genes, the fibroblast growth factor receptor 1 (FGFR1), serpin protease inhibitor (serpin F1) and the haematopoietic cell phosphatase (Hcph) to be specifically expressed in a small population of stromal cells which are in close contact to bulge stem cells. These specialized stromal cells might represent an essential mesenchymal component of the skin stem cell niche and may regulate stem cell proliferation and differentiation. Multiple FGFR1 isoforms are generated through alternate transcript splicing and are able to interact with both FGFs and cell adhesion molecules. Two predominant forms of the receptor are FGFR1-α and FGFR1-ß. Expression of a dominant negative form of the alpha isoform prevents hair follicle morphogenesis altogether. Given that FGFR1-ß signals principally through the FGF ligands, this data indicates that FGF signalling is dispensable for follicle morphogenesis. Moreover the loss of follicular morphogenesis upon suggests a requirement for signalling via cell adhesion molecule association with the receptor as FGFR1 α has a greater affinity for these molecules. The expression of the second candidate niche gene serpin f1, lead to the complete ablation of hair follicle morphogenesis. The serpin f1 product, pigment-epithelial derived factor (PEDF) has potent anti-angiogenic effects. Immunohistochemical analysis using CD31, a endothelial cell marker, revealed that although these cells are present, they have are disorganised and do not form vessels. Interestingly, endothelial cells have been found to contribute to the neuronal stem cell niche and our results suggest a similar mechanism in the skin. SHP1, the Hcph gene product, is a phosphatase which acts in the haematopoetic system. Motheaten mice carrying spontaneous mutations in the Hcph gene have patchy alopecia in their skin and severe defects in their haematopoietic system. However the haematopoietic rescue of the mouse does not result in normal follicular homeostasis. Additionally, ablation of Hcph in either the dermal or keratinocyte compartments of the skin produces hair follicles with abberant morphologies. This data indicates that although SHP1 is not essential for hair follicle morphogenesis it is required in both epidermal and dermal compartments to maintain follicular morphology. RÉSUMÉ PARTIE A Jusqu'à présent, les travaux dédiés à l'étude de la voie de signalisation Wnt dans le système immunitaire se sont essentiellement concentrés sur son rôle dans le développement des cellules immunitaires. Les données présentées ici suggèrent fortement et de manière nouvelle, l'existence d'un mécanisme par lequel la voie de signalisation Wnt/ß-caténine module le recrutement de cellules immunitaires dans un tissu périphérique, la peau, et ainsi la réponse inflammatoire cutanée. La réponse inflammatoire cutanée est un processus dynamique d'infiltration séquentielle de diverses cellules immunitaires, orchestré par un réseau de facteurs de croissance, chémokines et cytokines. Les kératinocytes sont des contributeurs majeurs à la réponse inflammatoire précoce par la libération de chémokines qui permettent ensuite de recruter les cellules immunitaires. Dans des souris sauvages, la réponse est d'abord caractérisée par une infiltration rapide et substantielle de neutrophiles, suivie par celle des macrophages et des lymphocytes T. L'expression d'un ligand activateur de le voie canonique de signalisation Wnt (après injection infra-dermique de fibroblastes sur-exprimant Wnt-3a) induit une infiltration dermique très marquée de neutrophiles. De plus, la réponse est éliminée en l'absence de ß-caténine spécifiquement dans les kératinocytes, indiquant que ces cellules sont à l'origine de la réponse. De manière remarquable, ceci suggère qu'une signalisation cruciale entre ces cellules résidentes de la peau et les cellules immunitaires recrutées est, au moins en partie, médiée par la voie Wnt. Corroborant ce rôle de la voie Wnt/ß-caténine dans le recrutement des neutrophiles, l'expression d'un ligand inhibiteur de la voie (sFRP1) résulte au cours d'une inflammation aigüe en une réduction spectaculaire de l'infiltration des cellules immunitaires en général, et des neutrophiles en particulier. De manière importante, la voie de signalisation Wnt est intrinsèquement requise pour la chémoattraction des neutrophiles en réponse à un stimulus inflammatoire. En effet, suite à une inflammation cutanée induite par un ester de phorbol (TPA), une réduction notable de l'infiltration des neutrophiles est observée dans des souris préalablement greffées avec de la moelle osseuse constituée de cellules déficientes en ß-caténine. De plus, in vitro, les neutrophiles sans ß-caténine ne répondent pas à une stimulation par l'interféron γ, qui est pourtant un signal inflammatoire établi in vivo. En conclusion, nos données indiquent que la voie de signalisation Wnt/ß-caténine joue une fonction active dans le recrutement des cellules immunitaires vers un organe périphérique, la peau, ainsi que dans la modulation, à plusieurs niveaux, de la réponse inflammatoire cutanée. PARTIE B Les cellules souches tissu-spécifiques forment la base cellulaire sur laquelle repose l'homéostase et la réparation tissulaires chez l'adulte. La maintenance de ce réservoir de cellules souches est hautement dépendante de leur environnement cellulaire immédiat, encore appelé «niche des cellules souches». Dans la peau, ces cellules stromales spécialisées représentent un compartiment mésenchymateux essentiel de la niche des cellules souches en régulant leurs prolifération et différentiation. Nous avons identifié trois gènes, le «récepteur 1 àux facteurs de croissance des fibroblastes » (Fgfr1 ), l' «inhibiteur de protéase à sérine » (serpinf1 ou pedf) et la « phosphatase des cellules hématopoiétiques » (Hcph ou Ptpn6), comme spécifiquement exprimés par une petite population de cellules stromales qui sont étroitement associées aux cellules souches de la peau (localisées au niveau du bombement du follicule pileux). Pour analyser leur fonction dans ce contexte, nous avons utilisé un test de reconstitution complète de peau murine en combinaison à des. transductions géniques basées sur l'utilisation de lentivirus. Ce test repose sur le mélange de deux compartiments cellulaires, épidermique (kératinocytes) et dermique (fibroblastes), greffés sur une zone ouverte de peau du dos d'une souris pour ensemble reconstituer la peau. Des isoformes multiples de FGFR1 sont générées par épissage alternatif de transcrits et sont capables d'interagir à la fois avec les FGFs (facteurs de croissance des fibroblastes) et les molécules d'adhésion cellulaires. Les deux formes prédominantes du récepteur, FGFR1-α et FGFR1-ß, ne différent que par le «domaine ressemblant aux immunoglobulines 1 » (immunoglobulin-like 1 domain), absent de FGFR1-ß. De plus, FGFR1-ß a une affinité plus grande pour les FGFs et plus faible pour les molécules d'adhésion cellulaires telles que la Ncadhérine (connue pour activer FGFR). La sur-expression de l'une ou l'autre des formes n'empêche pas la morphogenèse folliculaire mais conduit à la formation de follicules aberrants. Toutefois, une différence phénotypique majeure est observée lorsqu'une forme «Dominant-Négatif » (DN) est exprimée dans le compartiment dermique. La sur-expression de FGFR1-ß DN conduit en effet à la formation de follicules petits et tronqués, avec des gaines épithéliales et un bulbe élargis ainsi qu'une petite papille dermique. Par contre, l'expression de FGFR1-α DN abolit complètement la morphogenèse folliculaire. Etant donné que la signalisation par FGFR1-ß est principalement dépendante des ligands FGFs, ces données indiquent que la signalisation par ceux-cì est non-nécessaire à la morphogenèse folliculaire. De plus, l'abolition du processus par la sur-expression de FGFR1-a DN suggëre une signalisation nécessaire entre le récepteur FGFR1 et une ou des molécules d'adhésion cellulaire. L'expression de notre second candidat comme gène spécifique de la niche des cellules souches de la peau, serpinf1, prévient la morphogenèse folliculaire. Seules de petites structures ressemblant à des cystes sont observées après reconstitution de la peau. De plus, dans ces transplants, aucune cellule CD34-positive (marqueur des cellules souches) n'est retrouvée associé à ces cystes. Le produit du gène serpin f1, le «facteur dérivé d'épithélium pigmentaire » (PEDF) est un puissant facteur anti-angiogénique. Nous avons donc analysé la vascularisation des transplants par immunohistochirnies utilisant CD31, un marqueur des cellules endothéliales. Nos résultats révèlent que les cellules endothéliales sont bien présentes, mais de manière désorganisée et ne formant pas de vaisseaux. De manière intéressante, les cellules endothéliales contribuent activement à la niche des cellules souches neuronales, et nos résultats suggèrent donc l'existence possible d'un mécanisme similaire dans la peau. SHP1, le produit du gène Hcph, est une phosphatase quì agit dans le système hématopoiétique. Les souris « motheaten »qui portent des mutations spontanées du gène ont une alopécie inégale au niveau de la peau et de sévères troubles du système hématopoiétique. Pour s'assurer que le phénotype observé au niveau de la peau n'est pas une conséquence d'un défaut du système hématopoiétique, nous avons transplanté des souris Hcph -/- avec de la moelle osseuse sauvage afin de restaurer la fonction de SHP 1 dans le système hématopoiétique. Toutefois, le défaut de morphologie folliculaire est maintenu. De plus, l'ablation d'Hcph dans le compartiment dermique ou épidermique d'essais de reconstitution de peau conduit à la production de follicules pileux avec des morphologies aberrantes. Ces données indiquent que SHP1 n'est pas essentiel à la morphogenèse folliculaire mais est toutefois requis à la fois dans les compartiments épidermiques et dermiques pour la maintenance de la forme du follicule.

Evaluation of the Need for Longitudinal Median Joints in Bridge Decks on Dual Structures, TR-661, 2015

The primary objective of this project was to determine the effect of bridge width on deck cracking in bridges. Other parameters, such as bridge skew, girder spacing and type, abutment type, pier type, and number of bridge spans, were also studied. To achieve the above objectives, one bridge was selected for live-load and long-term testing. The data obtained from both field tests were used to calibrate a three-dimensional (3D) finite element model (FEM). Three different types of loading—live loading, thermal loading, and shrinkage loading—were applied. The predicted crack pattern from the FEM was compared to the crack pattern from bridge inspection results. A parametric study was conducted using the calibrated FEM. The general conclusions/recommendations are as follows: -- Longitudinal and diagonal cracking in the deck near the abutment on an integral abutment bridge is due to the temperature differences between the abutment and the deck. Although not likely to induce cracking, shrinkage of the deck concrete may further exacerbate cracks developed from thermal effects. -- Based upon a limited review of bridges in the Iowa DOT inventory, it appears that, regardless of bridge width, longitudinal and diagonal cracks are prevalent in integral abutment bridges but not in bridges with stub abutments. -- The parametric study results show that bridge width and skew have minimal effect on the strain in the deck bridge resulting from restrained thermal expansion. -- Pier type, girder type, girder spacing, and number of spans also appear to have no influence on the level of restrained thermal expansion strain in the deck near the abutment.

Effect of data acquisition accuracy on timing of stand harvests and expected net present value

Abstract

Dynamic Modelling of Material Flows and Sustainable Resource Use: Case Studies in Regional Metabolism and Space Life Support Systems

Sustainable resource use is one of the most important environmental issues of our times. It is closely related to discussions on the 'peaking' of various natural resources serving as energy sources, agricultural nutrients, or metals indispensable in high-technology applications. Although the peaking theory remains controversial, it is commonly recognized that a more sustainable use of resources would alleviate negative environmental impacts related to resource use. In this thesis, sustainable resource use is analysed from a practical standpoint, through several different case studies. Four of these case studies relate to resource metabolism in the Canton of Geneva in Switzerland: the aim was to model the evolution of chosen resource stocks and flows in the coming decades. The studied resources were copper (a bulk metal), phosphorus (a vital agricultural nutrient), and wood (a renewable resource). In addition, the case of lithium (a critical metal) was analysed briefly in a qualitative manner and in an electric mobility perspective. In addition to the Geneva case studies, this thesis includes a case study on the sustainability of space life support systems. Space life support systems are systems whose aim is to provide the crew of a spacecraft with the necessary metabolic consumables over the course of a mission. Sustainability was again analysed from a resource use perspective. In this case study, the functioning of two different types of life support systems, ARES and BIORAT, were evaluated and compared; these systems represent, respectively, physico-chemical and biological life support systems. Space life support systems could in fact be used as a kind of 'laboratory of sustainability' given that they represent closed and relatively simple systems compared to complex and open terrestrial systems such as the Canton of Geneva. The chosen analysis method used in the Geneva case studies was dynamic material flow analysis: dynamic material flow models were constructed for the resources copper, phosphorus, and wood. Besides a baseline scenario, various alternative scenarios (notably involving increased recycling) were also examined. In the case of space life support systems, the methodology of material flow analysis was also employed, but as the data available on the dynamic behaviour of the systems was insufficient, only static simulations could be performed. The results of the case studies in the Canton of Geneva show the following: were resource use to follow population growth, resource consumption would be multiplied by nearly 1.2 by 2030 and by 1.5 by 2080. A complete transition to electric mobility would be expected to only slightly (+5%) increase the copper consumption per capita while the lithium demand in cars would increase 350 fold. For example, phosphorus imports could be decreased by recycling sewage sludge or human urine; however, the health and environmental impacts of these options have yet to be studied. Increasing the wood production in the Canton would not significantly decrease the dependence on wood imports as the Canton's production represents only 5% of total consumption. In the comparison of space life support systems ARES and BIORAT, BIORAT outperforms ARES in resource use but not in energy use. However, as the systems are dimensioned very differently, it remains questionable whether they can be compared outright. In conclusion, the use of dynamic material flow analysis can provide useful information for policy makers and strategic decision-making; however, uncertainty in reference data greatly influences the precision of the results. Space life support systems constitute an extreme case of resource-using systems; nevertheless, it is not clear how their example could be of immediate use to terrestrial systems.

The Network Company in Catalonia : ICT, Productivity, Competitiveness, Salaries and Performance in Catalonia's Companies. Research report (synthesis document)

Resum en anglès del projecte de recerca L'empresa xarxa a Catalunya. TIC, productivitat, competitivitat, salaris i beneficis a l'empresa catalana té com a objectiu principal constatar que la consolidació d'un nou model estratègic, organitzatiu i d'activitat empresarial, vinculat amb la inversió i l'ús de les TIC (o empresa xarxa), modifica substancialment els patrons de comportament dels resultats empresarials, en especial la productivitat, la competitivitat, les retribucions dels treballadors i el benefici. La contrastació empírica de les hipòtesis de treball l'hem feta per mitjà de les dades d'una enquesta a una mostra representativa de 2.038 empreses catalanes. Amb la perspectiva de l'impacte de la inversió i l'ús de les TIC no s'aprecia una relació directa entre els processos d'innovació digital i els resultats de l'activitat de l'empresa catalana. En aquest sentit, hem hagut de segmentar el teixit productiu català per a buscar les organitzacions en què el procés de coinnovació tecnològica digital i organitzativa és més present i en què la intensitat de l'ús del coneixement és un recurs molt freqüent per a poder copsar impactes rellevants en els principals resultats empresarials. Això és així perquè l'economia catalana, avui, presenta una estructura productiva dual.

L'empresa xarxa a Catalunya : TIC, productivitat, competitivitat, salaris i rendiment a les empreses de Catalunya. Informe final de recerca (volum II)

El projecte de recerca L'empresa xarxa a Catalunya. TIC, productivitat, competitivitat, salaris i beneficis a l'empresa catalana té com a objectiu principal constatar que la consolidació d'un nou model estratègic, organitzatiu i d'activitat empresarial, vinculat amb la inversió i l'ús de les TIC (o empresa xarxa), modifica substancialment els patrons de comportament dels resultats empresarials, en especial la productivitat, la competitivitat, les retribucions dels treballadors i el benefici. La contrastació empírica de les hipòtesis de treball l'hem feta per mitjà de les dades d'una enquesta a una mostra representativa de 2.038 empreses catalanes. Amb la perspectiva de l'impacte de la inversió i l'ús de les TIC no s'aprecia una relació directa entre els processos d'innovació digital i els resultats de l'activitat de l'empresa catalana. En aquest sentit, hem hagut de segmentar el teixit productiu català per a buscar les organitzacions en què el procés de coinnovació tecnològica digital i organitzativa és més present i en què la intensitat de l'ús del coneixement és un recurs molt freqüent per a poder copsar impactes rellevants en els principals resultats empresarials. Això és així perquè l'economia catalana, avui, presenta una estructura productiva dual.

L'empresa xarxa a Catalunya : TIC, productivitat, competitivitat, salaris i rendiment a les empreses de Catalunya. Informe final de recerca (volum I)

El projecte de recerca L'empresa xarxa a Catalunya. TIC, productivitat, competitivitat, salaris i beneficis a l'empresa catalana té com a objectiu principal constatar que la consolidació d'un nou model estratègic, organitzatiu i d'activitat empresarial, vinculat amb la inversió i l'ús de les TIC (o empresa xarxa), modifica substancialment els patrons de comportament dels resultats empresarials, en especial la productivitat, la competitivitat, les retribucions dels treballadors i el benefici. La contrastació empírica de les hipòtesis de treball l'hem feta per mitjà de les dades d'una enquesta a una mostra representativa de 2.038 empreses catalanes. Amb la perspectiva de l'impacte de la inversió i l'ús de les TIC no s'aprecia una relació directa entre els processos d'innovació digital i els resultats de l'activitat de l'empresa catalana. En aquest sentit, hem hagut de segmentar el teixit productiu català per a buscar les organitzacions en què el procés de coinnovació tecnològica digital i organitzativa és més present i en què la intensitat de l'ús del coneixement és un recurs molt freqüent per a poder copsar impactes rellevants en els principals resultats empresarials. Això és així perquè l'economia catalana, avui, presenta una estructura productiva dual.

Effectiveness of Dynamic Messaging on Driver Behavior for Late Merge Lane Road Closures, 2009

Efforts to improve safety and traffic flow through merge areas on high volume/high speed roadways have included early merge and late merge concepts and several studies of the effectiveness of these concepts, many using Intelligent Transportation Systems for implementation. The Iowa Department of Transportation (Iowa DOT) planned to employ a system of dynamic message signs (DMS) to enhance standard temporary traffic control for lane closures and traffic merges at two bridge construction projects in western Iowa (Adair County and Cass County counties) on I-80 during the 2008 construction season. To evaluate the DMS system’s effectiveness for impacting driver merging actions, the Iowa DOT contracted with Iowa State University’s Center for Transportation Research and Education to perform the evaluation and make recommendations for future use of this system based on the results. Data were collected over four weekends, beginning August 1–4 and ending October 16–20, 2008. Two weekends yielded sufficient data for evaluation, one of transition traffic flow and the other with a period of congestion. For both of these periods, a statistical review of collected data did not indicate a significant impact on driver merging actions when the DMS messaging was activated as compared to free flow conditions with no messaging. Collection of relevant project data proved to be problematic for several reasons. In addition to personnel safety issues associated with the placement and retrieval of counting devices on a high speed roadway, unsatisfactory equipment performance and insufficient congestion to activate the DMS messaging hampered efforts. A review of the data that was collected revealed different results taken by the tube counters compared to the older model plate counters. Although variations were not significant from a practical standpoint, a statistical evaluation showed that the data, including volumes, speeds, and classifications from the two sources were not comparable at a 95% level of confidence. Comparison of data from the Iowa DOT’s automated traffic recorders (ATRs) in the area also suggested variations in results from these data collection systems. Additional comparison studies were recommended.

Software for interpolation of vegetative growth of yerba mate plants in 3D

The objective of this work was to build mock-ups of complete yerba mate plants in several stages of development, using the InterpolMate software, and to compute photosynthesis on the interpolated structure. The mock-ups of yerba-mate were first built in the VPlants software for three growth stages. Male and female plants grown in two contrasting environments (monoculture and forest understory) were considered. To model the dynamic 3D architecture of yerba-mate plants during the biennial growth interval between two subsequent prunings, data sets of branch development collected in 38 dates were used. The estimated values obtained from the mock-ups, including leaf photosynthesis and sexual dimorphism, are very close to those observed in the field. However, this similarity was limited to reconstructions that included growth units from original data sets. The modeling of growth dynamics enables the estimation of photosynthesis for the entire yerba mate plant, which is not easily measurable in the field. The InterpolMate software is efficient for building yerba mate mock-ups.