海洋工程中的弹性支持梁

油气输送管线是海洋工程中的重要装备,对其进行安全评估是工程设计和检测的必要组成部分和主要目标.由于海底不平、挖沟作业、海流冲刷等情况会使管线在海底起伏弯曲,因此需要对这种变形状态下的管线进行强度分析.考虑海底土壤对管线的弹性支持作用,将管线模型化为支撑在弹性地基上的长梁,给出这种弹性支持梁在起伏弯曲情况下的强度分析方法.该问题的特点是:由起伏引起的弹性梁的两段悬空长度、一段与地基接触的长度均是待求量.与通常的弹性地基梁问题不同,这是一个动边界问题.

城市生活垃圾中微量金属元素含量的特性分析

城市生活垃圾中含有多种微量金属元素,可能会对环境和人们的健康造成危害.分析这些元素随着产地及时间的差别,了解它们在垃圾中的富集量,对于垃圾的处理和综合利用是非常重要的.在此通过连续监测1年内某沿海城市若干地区生活垃圾的组成成分,得到了垃圾中微量金属元素的原始数据,探讨了微量金属元素随来源和季节的分布规律,并进行了较为详尽的讨论.

有限厚度非均质海床对非线性波浪响应的有限元模拟

在Biot 多孔介质动力固结理论的基础上，对有限厚度砂质海床与非线性波浪的相互作用进行了有限元数值模拟。进行参量研究，分析了波浪非线性、海床非均质性和相对厚度等因素对海床土层内超孔隙水压力分布的影响。

功能梯度材料裂纹能量释放率

提出一个评价功能梯度材料裂扩展能量释放率的简单方法，用双悬臂梁柔度法推导了典型梯度材料理解纹沿梯度方向扩展的能量释放率解析表达式，用算例分析了裂纹扩展方向不同能量释放率的差别.

Interactions of CO, HCl, and Sox in Pulverised Coal Flames

The effect of HCl and SO_2 on CO oxidation in pulverised coal flames was investigated experimentally and kinetically in an entrained flow combustion reactor. Two bituminous coals (German 'Goettelborn' and a Polish coal) were used as fuels with a feeding rate of 1 or 1.5 kg/h. HCl or SO_2 is introduced into the reactor premixed with the primary air. Experimental results indicate that HCl addition may inhibit CO oxidation in coal flames and increases CO emission. Reducing temperature in the reactor will enhance the inhibitory effect of HCl on CO oxidation. The measured CO profiles along the reactor height clearly show that the addition of HCl may inhibit CO oxidation. In the experimental range of SO_2 addition. The inhibiting effect of SO_2 on CO oxidation is less significant than HCl. A detailed kinetic mechanism is used to model the reactions. And the controlling reactions are analysed.

Deformation Defects in Nanocrystalline Nickel

Defects induced by plastic deformation in electrodeposited, fully dense nanocrystalline (nc) Ni with an average grain size of 25 nm have been characterized by means of high resolution transmission electron microscopy. The nc Ni was deformed under uniaxial tension at liquid-nitrogen temperature. Trapped full dislocations were observed in the grain interior and near the grain boundaries. In particular, these dislocations preferred to exist in the form of dipoles. Deformation twinning was confirmed in nc grains and the most proficient mechanism is the heterogeneous nucleation via emission of partial dislocations from the grain boundaries.

色散效应对GaAs太阳电池双层减反射膜的影响

考虑双层减反射膜材料的折射率色散效应,采用光学干涉矩阵法计算了SiO2/ZnSe和SiO2/ZnS两种GaAs太阳电池双层减反射膜的反射率与波长的函数曲线,以及加权平均反射率随着顶层减反射膜SiO2厚度变化的函数曲线,并与未考虑色散效应的情况进行了对比.计算结果表明,色散效应对双层减反射膜的反射率有较大的影响,特别是对300～500nm波长范围的影响更大,且对不同材料的减反射膜的影响也是不同的.与未考虑色散效应的情况相比,考虑色散效应后,SiO2/ZnSe双层减反射膜的最小加权平均反射率从1.14％增加到

Concentration distribution in solution crystal growth: effect of moving interface conditions

The linear diffusion-reaction theory with finite interface kinetics is employed to describe the dissolution and the growth processes. The results show that it is imperative to consider the effect of the moving interfaces on the concentration distribution at the growth interface for some cases. For small aspect ratio and small gravity magnitude, the dissolution and the growth interfaces must be treated as the moving boundaries within an angle range of 0 degrees < gamma < 50 degrees in this work. For large aspect ratio or large gravity magnitude, the effect of the moving interfaces on the concentration distribution at the growth interface can be neglected except for gamma < - 50 degrees.

Study of Gliding Arc Discharge Plasma

本文研究了滑动弧放电过程中电参数的变化，并对滑动弧等离子体中的非平衡度和各参数之间关系进行了讨论。应用了双通道电弧模型 ，对电弧在气流作用下的运动规律进行了数值模拟。模拟的结果有助于分析滑动弧非平衡等离子体的产生机理。 The elelctric parameters change during discharge is studied and the relationship between non-equilibrium degree and parameters is discussed for gliding arc discharge.Using two-channel model, the rules of arc moving due to effect of the airflow is simulated.The numerical simulation results can help analyzing the generation mechanism of gliding arc non-equilibrium plasma.

Elastic Waves in a Hybrid Multilayered Piezoelectric Plate

An analytical-numerical method is presented for analyzing dispersion and characteristic surface of waves in a hybrid multilayered piezoelectric plate. In this method, the multilayered piezoelectric plate is divided into a number of layered elements with three-nodal-lines in the wall thickness, the coupling between the elastic field and the electric field is considered in each element. The associated frequency dispersion equation is developed and the phase velocity and slowness, as well as the group velocity and slowness are established in terms of the Rayleigh quotient. Six characteristic wave surfaces are introduced to visualize the effects of anisotropy and piezoelectricity on wave propagation. Examples provide a full understanding for the complex phenomena of elastic waves in hybrid multilayered piezoelectric media.

Morphological Evolution During Synthesis of New AlPO4 Center dot H2O Crystal

A new crystal of aluminophosphate, AIPO(4)(.)H(2)O, is synthesized from two-batch aqueous solution under hydrothermal conditions. Three types of the crystal habits, i.e. the tetragonal double pyramid, the tetragonal prism and the plate-type tetragonal prism, are found from batch-A solution. Two types of the crystal habits, i.e. the hexagonal pyramid and the strip-type tetragonal prism, are found from batch-B solution. The change of crystal morphology is originated from the fluctuation of the synthesis conditions, such as the supersaturation, the temperature and the impurity content. It causes change of the step energies, the defect density and the step roughness, and further, change of the growth rates. Since the crystal morphology is sensitive to the mass transport mechanism, the crystal habits could be changed under the microgravity.

Simulating shock to detonation transition: Algorithm and results

An algorithm based on flux-corrected transport and the Lagrangian finite element method is presented for solving the problem of shock dynamics. It is verified through the model problem of one-dimensional strain elastoplastic shock wave propagation that the algorithm leads to stable, non-oscillatory results. Shock initiation and detonation wave propagation is simulated using the algorithm, and some interesting results are obtained. (C) 1999 Academic Press.

Influences of strain rate and temperature variation on material intrinsic length of plasticity strain gradient theory

Cowper-Symonds and Johnson-Cook dynamic constitutive relations are used to study the influence of both strain rate effect and temperature variation on the material intrinsic length scale in strain gradient plasticity. The material intrinsic length scale decreases with increasing strain rates, and this length scale increases with temperature.

正向爆轰驱动高焓激波风洞的数值模拟

对充满氢氧可燃气体、带扩容腔的正向爆轰驱动的激波风洞进行了数值模拟.计算采用了欧拉方程,频散可控耗散差分格式(DCD)和改进的二阶段化学反应模型.在扩容腔附近采用二维轴对称计算模型,而在驱动段和被驱动段的直管道部分则采用一维计算模型.本文分析了爆轰波在管道中的传播、反射和绕射过程.计算结果表明扩容腔的尺寸对爆轰波的传播、反射、汇聚等起着决定性的作用;带扩容腔的正向爆轰驱动的激波风洞能够得到平稳的持续时间较长的气流,提高了实验的精确度和可重复性.

Effects of Noise and Detection Error in a Dynamic Adaptive Optics System

It is well known that noise and detection error can affect the performances of an adaptive optics (AO) system. Effects of noise and detection error on the phase compensation effectiveness in a dynamic AO system are investigated by means of a pure numerical simulation in this paper. A theoretical model for numerically simulating effects of noise and detection error in a static AO system and a corresponding computer program were presented in a previous article. A numerical simulation of effects of noise and detection error is combined with our previous numeral simulation of a dynamic AO system in this paper and a corresponding computer program has been compiled. Effects of detection error, readout noise and photon noise are included and investigated by a numerical simulation for finding the preferred working conditions and the best performances in a practical dynamic AO system. An approximate model is presented as well. Under many practical conditions such approximate model is a good alternative to the more accurate one. A simple algorithm which can be used for reducing the effect of noise is presented as well. When signal to noise ratio is very low, such method can be used to improve the performances of a dynamic AO system.