The impact of infrastructure charges on new housing costs : an international comparison

Sourcing funding for the provision of new urban infrastructure has been a policy dilemma for governments around the world for decades. This is particularly relevant in high growth areas where new services are required to support swelling populations. Existing communities resist the introduction of new taxes to fund such infrastructure, hence the introduction of charges to the developer has flourished. The Australian infrastructure funding policy dilemmas are reflective of similar matters to some extent in the United Kingdom, and to a greater extent the United States of America. In these countries, infrastructure cost recovery policies have been in place since the 1940’s and 1970’s respectively. There is an extensive body of theoretical and empirical literature that discusses the passing on (to home buyers) or passing back (to the englobo land seller) of these increased infrastructure charges, and the corresponding impact on housing cost and supply. The purpose of this research is to examine the international evidence that suggests infrastructure charges contribute to increased house prices as well as reduced land supply. The paper concludes that whilst the theoretical work is largely consistent, the empirical research to date is inconclusive and further research is required into these impacts in Australia.

Land buyers likely to foot reform costs

Article in Courier Mail. Friday July 22, 2011.

Value co-creation in social marketing wellness services

Customer perceived value is concerned with the experiences of consumers when using a service and is often referred to in the context of service provision or on the basis of service quality (Auh, et al., 2007; Chang, 2008; Jackson, 2007; Laukkanen, 2007; Padgett & Mulvey, 2007; Shamdasani, Mukherjee & Malhotra, 2008). Understanding customer perceived value has benefits for social marketing and allows scholars and practitioners alike to identify why consumers engage in positive social behaviours through the use of services. Understanding consumers’ use of wellness services in particular is important, because the use of wellness services demonstrates the fulfilment of social marketing aims; performing pro-active, positive social behaviours that are of benefit to the individual and to society (Andreasen, 1994). As consumers typically act out of self-interest (Rothschild, 1999), this research posits that a value proposition must be made to consumers in order to encourage behavioural change. Thus, this research seeks to identify how value is created for consumers of wellness services in social marketing. This results in the overall research question of this research: How is value created in social marketing wellness services? A traditional method towards understanding value has been the adoption of an economic approach, which considers the utility gained and where value is a direct outcome of a cost-benefit analysis (Payne & Holt, 1999). However, there has since been a shift towards the adoption of an experiential approach in understanding value. This experiential approach considers the consumption experience of the consumer which extends beyond the service exchange and includes pre- and post-consumption stages (Russell-Bennett, Previte & Zainuddin, 2009). As such, this research uses an experiential approach to identify the value that exists in social marketing wellness services. Four dimensions of value have been commonly conceptualised and identified in the commercial marketing literature; functional, emotional, social, and altruistic value (Holbrook, 1994; Sheth, Newman & Gross, 1991; Sweeney & Soutar, 2001). It is not known if these value dimensions also exist in social marketing. In addition, sources of value said to influence value dimensions have been conceptualised in the literature. Sources of value such as information, interaction, environment, service, customer co-creation, and social mandate have been conceptually identified both in the commercial and social marketing literature (Russell-Bennet, Previte & Zainuddin, 2009; Smith & Colgate, 2007). However, it is not clear which sources of value contribute to the creation of value for users of wellness services. Thus, this research seeks to explore these relationships. This research was conducted using a wellness service context, specifically breast cancer screening services. The primary target consumer of these services is women aged 50 to 69 years old (inclusive) who have never been diagnosed with breast cancer. It is recommended that women in this target group have a breast screen every 2 years in order to achieve the most effective medical outcomes from screening. A two-study mixed method approach was utilised. Study 1 was a qualitative exploratory study that analysed individual-depth interviews with 25 information-rich respondents. The interviews were transcribed verbatim and analysed using NVivo 8 software. The qualitative results provided evidence of the existence of the four value dimensions in social marketing. The results also allowed for the development of a typology of experiential value by synthesising current understanding of the value dimensions, with the activity aspects of experiential value identified by Holbrook (1994) and Mathwick, Malhotra and Rigdon (2001). The qualitative results also provided evidence for the existence of sources of value in social marketing, namely information, interaction, environment and consumer participation. In particular, a categorisation of sources of value was developed as a result of the findings from Study 1, which identify organisational, consumer, and third party sources of value. A proposed model of value co-creation and a set of hypotheses were developed based on the results of Study 1 for further testing in Study 2. Study 2 was a large-scale quantitative confirmatory study that sought to test the proposed model of value co-creation and the hypotheses developed. An online-survey was administered Australia-wide to women in the target audience. A response rate of 20.1% was achieved, resulting in a final sample of 797 useable responses after removing ineligible respondents. Reliability and validity analyses were conducted on the data, followed by Exploratory Factor Analysis (EFA) in PASW18, followed by Confirmatory Factor Analysis (CFA) in AMOS18. Following the preliminary analyses, the data was subject to Structural Equation Modelling (SEM) in AMOS18 to test the path relationships hypothesised in the proposed model of value creation. The SEM output revealed that all hypotheses were supported, with the exception of one relationship which was non-significant. In addition, post hoc tests revealed seven further significant non-hypothesised relationships in the model. The quantitative results show that organisational sources of value as well as consumer participation sources of value influence both functional and emotional dimensions of value. The experience of both functional and emotional value in wellness services leads to satisfaction with the experience, followed by behavioural intentions to perform the behaviour and use the service again. One of the significant non-hypothesised relationships revealed that emotional value leads to functional value in wellness services, providing further empirical evidence that emotional value features more prominently than functional value for users of wellness services. This research offers several contributions to theory and practice. Theoretically, this research addresses a gap in the literature by using social marketing theory to provide an alternative method of understanding individual behaviour in a domain that has been predominantly investigated in public health. This research also clarifies the concept of value and offers empirical evidence to show that value is a multi-dimensional construct with separate and distinct dimensions. Empirical evidence for a typology of experiential value, as well as a categorisation of sources of value is also provided. In its practical contributions, this research identifies a framework that is the value creation process and offers health services organisations a diagnostic tool to identify aspects of the service process that facilitate the value creation process.

Fundamentals of process integration

Technologies and languages for integrated processes are a relatively recent innovation. Over that period many divergent waves of innovation have transformed process integration. Like sockets and distributed objects, early workflow systems ordered programming interfaces that connected the process modelling layer to any middleware. BPM systems emerged later, connecting the modelling world to middleware through components. While BPM systems increased ease of use (modelling convenience), long-standing and complex interactions involving many process instances remained di±cult to model. Enterprise Service Buses (ESBs), followed, connecting process models to heterogeneous forms of middleware. ESBs, however, generally forced modellers to choose a particular underlying middleware and to stick to it, despite their ability to connect with many forms of middleware. Furthermore ESBs encourage process integrations to be modelled on their own, logically separate from the process model. This can lead to the inability to reason about long standing conversations at the process layer. Technologies and languages for process integration generally lack formality. This has led to arbitrariness in the underlying language building blocks. Conceptual holes exist in a range of technologies and languages for process integration and this can lead to customer dissatisfaction and failure to bring integration projects to reach their potential. Standards for process integration share similar fundamental flaws to languages and technologies. Standards are also in direct competition with other standards causing a lack of clarity. Thus the area of greatest risk in a BPM project remains process integration, despite major advancements in the technology base. This research examines some fundamental aspects of communication middleware and how these fundamental building blocks of integration can be brought to the process modelling layer in a technology agnostic manner. This way process modelling can be conceptually complete without becoming stuck in a particular middleware technology. Coloured Petri nets are used to define a formal semantics for the fundamental aspects of communication middleware. They provide the means to define and model the dynamic aspects of various integration middleware. Process integration patterns are used as a tool to codify common problems to be solved. Object Role Modelling is a formal modelling technique that was used to define the syntax of a proposed process integration language. This thesis provides several contributions to the field of process integration. It proposes a framework defining the key notions of integration middleware. This framework provides a conceptual foundation upon which a process integration language could be built. The thesis defines an architecture that allows various forms of middleware to be aggregated and reasoned about at the process layer. This thesis provides a comprehensive set of process integration patterns. These constitute a benchmark for the kinds of problems a process integration language must support. The thesis proposes a process integration modelling language and a partial implementation that is able to enact the language. A process integration pilot project in a German hospital is brie°y described at the end of the thesis. The pilot is based on ideas in this thesis.

Power relations and small and medium-sized enterprise strategies for capturing value in global production networks: visual effects (VFX) service firm in the Hollywood film industry

Power relations and small and medium-sized enterprise strategies for capturing value in global production networks: visual effects (VFX) service firms in the Hollywood film industry, Regional Studies. This paper provides insights into the way in which non-lead firms manoeuvre in global value chains in the pursuit of a larger share of revenue and how power relations affect these manoeuvres. It examines the nature of value capture and power relations in the global supply of visual effects (VFX) services and the range of strategies VFX firms adopt to capture higher value in the global value chain. The analysis is based on a total of thirty-six interviews with informants in the industry in Australia, the United Kingdom and Canada, and a database of VFX credits for 3323 visual products for 640 VFX firms.

Legal Profession Act 2007 s 319 - Whether costs agreement made after trial valid and enforceable - whether agreement had retrospective operation

The decision in QCOAL Pty Ltd v Cliffs Australia Coal Pty Ltd [2010] QSC 479 involved an examination of a number of issues relating to the assessment of costs under the Legal Profession Act 2007 (Qld). The decision highlights a range of issues which, in slightly different circumstances, may have deprived the successful party of the right to recover costs by reference to the costs agreement.

Interim bills and costs assessment : was the application in or out of time?

This article examines the decision in Turner v Mitchells Solicitors [2011] QDC 61 and the issue whether an application for assessment of costs under an interim bill at the time of a final bill is subject to the usual 12-month restriction.

Current affairs in British public service broadcasting : challenges and opportunities

This chapter looks at the challenges and opportunities of current affairs in British public service broadcasting

Smart Measures for Sustainable Outcomes: Integrated Considerations for Sustainable Refurbishment of Office Buildings

The increasing stock of aging office buildings will see a significant growth in retrofitting projects in Australian capital cities. Stakeholders of refitting works will also need to take on the sustainability challenge and realize tangible outcomes through project delivery. Traditionally, decision making for aged buildings, when facing the alternatives, is typically economically driven and on ad hoc basis. This leads to the tendency to either delay refitting for as long as possible thus causing building conditions to deteriorate, or simply demolish and rebuild with unjust financial burden. The technologies involved are often limited to typical strip-clean and repartition with dry walls and office cubicles. Changing business operational patterns, the efficiency of office space, and the demand on improved workplace environment, will need more innovative and intelligent approaches to refurbishing office buildings. For example, such projects may need to respond to political, social, environmental and financial implications. There is a need for the total consideration of buildings structural assessment, modeling of operating and maintenance costs, new architectural and engineering designs that maximise the utility of the existing structure and resulting productivity improvement, specific construction management procedures including procurement methods, work flow and scheduling and occupational health and safety. Recycling potential and conformance to codes may be other major issues. This paper introduces examples of Australian research projects which provided a more holistic approach to the decision making of refurbishing office space, using appropriate building technologies and products, assessment of residual service life, floor space optimisation and project procurement in order to bring about sustainable outcomes. The paper also discusses a specific case study on critical factors that influence key building components for these projects and issues for integrated decision support when dealing with the refurbishment, and indeed the “re-life”, of office buildings.

Conformance checking of service behavior

A service-oriented system is composed of independent software units, namely services, that interact with one another exclusively through message exchanges. The proper functioning of such system depends on whether or not each individual service behaves as the other services expect it to behave. Since services may be developed and operated independently, it is unrealistic to assume that this is always the case. This article addresses the problem of checking and quantifying how much the actual behavior of a service, as recorded in message logs, conforms to the expected behavior as specified in a process model.We consider the case where the expected behavior is defined using the BPEL industry standard (Business Process Execution Language for Web Services). BPEL process definitions are translated into Petri nets and Petri net-based conformance checking techniques are applied to derive two complementary indicators of conformance: fitness and appropriateness. The approach has been implemented in a toolset for business process analysis and mining, namely ProM, and has been tested in an environment comprising multiple Oracle BPEL servers.

Investigating pre-service teachers’ perceptions of their preparedness to teach

The experiences of transition to the teaching profession have a significant impact on a teachers’ potential length of career, feelings of professional efficacy and the quality of performance in the classroom (Gore & Thomas, 2003). While the transition to practice is characterized by much expectation and excitement, it also a time of stress and uncertainty for many beginning teachers. As such, it is important to investigate this period of transition for beginning teachers. This paper explores graduate teachers perceptions of their personal ‘preparedness to teach’. The group is graduating from one Australian university, and the data is captured at the end of their teacher preparation programs,before they take up positions in schools. These graduating pre-service teachers are from one year graduate entry programs that include individual programs of early years, middle years and senior years. The key findings indicate that this group of graduating pre-service teachers are already engaged in some level of reflective practice and are actively seeking further professional learning to improve the practical aspects of their classroom teaching.

Service delivery framework : an architectural strategy for next-generation service delivery in business network

The next-generation of service-oriented architecture (SOA) needs to scale for flexible service consumption, beyond organizational and application boundaries, into communities, ecosystems and business networks. In wider and, ultimately, global settings, new capabilities are needed so that business partners can efficiently and reliably enable, adapt and expose services. Those services can then be discovered, ordered, consumed, metered and paid for, through new applications and opportunities, driven by third-parties in the global “village”. This trend is already underway, in different ways, through different early adopter market segments. This paper proposes an architectural strategy for the provisioning and delivery of services in communities, ecosystems and business networks – a Service Delivery Framework (SDF). The SDF is intended to support multiple industries and deployments where a SOA platform is needed for collaborating partners and diverse consumers. Specifically, it is envisaged that the SDF allows providers to publish their services into network directories so that they can be repurposed, traded and consumed, and leveraging network utilities like B2B gateways and cloud hosting. To support these different facets of service delivery, the SDF extends the conventional service provider, service broker and service consumer of the Web Services Architecture to include service gateway, service hoster, service aggregator and service channel maker.

Diversified service provisioning in global business networks

Companies and their services are being increasingly exposed to global business networks and Internet-based ondemand services. Much of the focus is on flexible orchestration and consumption of services, beyond ownership and operational boundaries of services. However, ways in which third-parties in the “global village” can seamlessly self-create new offers out of existing services remains open. This paper proposes a framework for service provisioning in global business networks that allows an open-ended set of techniques for extending services through a rich, multi-tooling environment. The Service Provisioning Management Framework, as such, supports different modeling techniques, through supportive tools, allowing different parts of services to be integrated into new contexts. Integration of service user interfaces, business processes, operational interfaces and business object are supported. The integration specifications that arise from service extensions are uniformly reflected through a kernel technique, the Service Integration Technique. Thus, the framework preserves coherence of service provisioning tasks without constraining the modeling techniques needed for extending different aspects of services.

Towards a unified service description language for the internet of services : requirements and first developments

Service-oriented Architectures (SOA) and Web services leverage the technical value of solutions in the areas of distributed systems and cross-enterprise integration. The emergence of Internet marketplaces for business services is driving the need to describe services, not only from a technical level, but also from a business and operational perspective. While, SOA and Web services reside in an IT layer, organizations owing Internet marketplaces are requiring advertising and trading business services which reside in a business layer. As a result, the gap between business and IT needs to be closed. This paper presents USDL (Unified Service Description Language), a specification language to describe services from a business, operational and technical perspective. USDL plays a major role in the Internet of Services to describe tradable services which are advertised in electronic marketplaces. The language has been tested using two service marketplaces as use cases.

Composing services for third-party service delivery

This paper proposes a model-based technique for lowering the entrance barrier for service providers to register services with a marketplace broker, such that the service is rapidly configured to utilize the brokerpsilas local service delivery management components. Specifically, it uses process modeling for supporting the execution steps of a service and shows how service delivery functions (e.g. payment points) ldquolocalrdquo to a service broker can be correctly configured into the process model. By formalizing the different operations in a service delivery function (like payment or settlement) and their allowable execution sequences (full payments must follow partial payments), including cross-function dependencies, it shows how through tool support, the non-technical user can quickly configure service delivery functions in a consistent and complete way.