Obtenção de placas cerâmico a partir de formulações de massas triaxiais de resíduos de caulim, chamote de telha e cinza vegetal

The production of red ceramic is an industrial activity that causes an intense impact. The manufacture of its products considerably increases the demand for natural resources, mainly with the extraction of raw material. The ceramic material produced generates waste, such as ash firewood and chamote. The residue from the beneficiation of kaolin is deposited in a poor, degrades the environment and contaminate water sources and soil, constituting in this manner, ecological disasters. The main objective of this work is to develop the formulation of a ceramic product consisting solely of industrial solid wastes, from ceramic tiles, (chamote) residue of kaolin and ash firewood. It is assumed that this product made in the laboratory can be used in coatings, wall and floor. The aim is to facilitate the replacement of the raw material of original composition of a ceramic body, for waste, while the process of production equal to the conventionally used, so that the properties of the product are reproduced. This work is characterized waste as its chemical composition, analysis of particle size, X-ray diffraction and thermal behavior. Several formulations were studied. The mass of waste was prepared by dry process, pressed to 25 MPa, and then burned in muffle type oven to 850, 950, 1050 and 1150 °C. The results showed that it is technically possible to produce porous tiles only with waste. It was found that the formulations of bodies play a key role in the properties of the final product, as well as the sintering temperature and heating rates. RN in the waste of kaolin is estimated at 15,000 t/month, about 3,000 gray t/month and chamote with 10 million pieces/month damaged. The presence of carbonates of calcium and magnesium at 1050 ° C results in an appropriate porosity and mechanical strength. The formulation M3JE, composed of 69% waste of kaolin, 7.7% and 23.3% of chamote of gray, became suitable for porous materials with the strength and absorption within the level of national and international standards

Análise de desempenho de um fogão solar construído a partir de sucatas de antena de tv

Given the growing environmental crisis caused by degradation, mainly due to the use of polluting energy sources, increasing the growing use of renewable energies worldwide, with emphasis on solar energy, an abundant supply and available to everyone, which can be harnessed in several ways: electricity generation; dehydration of food; heating, disinfection and distillation and cooking. The latter has as its primary feature the viability of clean, renewable energy for society, combating ecological damage caused by large-scale use of firewood for cooking foods, use in tropical countries with high solar radiation, and has funding NGOs throughout the world with the goal of achieving low-income population. The proposed project consists of a solar cooker for concentration, working from the reflection of sunlight by a hub that they converge to a focal point at the bottom of the pot, getting lots of heat. The solar cooker under study consists of two elliptical reflecting parabolas made from the recycling of scrap TV antenna, having 0.29 m² of surface area for each antenna, which were covered by multiple mirrors of 2 mm thick and mounted on a metal structure, with correction for the mobility of the apparent movement of the sun. This structure was built with the recycling of scrap metal, possessing a relatively low cost compared with other solar cookers, around US$ 50.00. This cost becomes negligible, since that will involve a great benefit to not have fuel costs for each meal, unlike the use of gas or firewood for cooking food. The tests show that the cooker has reached the maximum temperature of 740 ° C, for boiling water in an average time of 28 minutes, cooking various types of foods such as potatoes, rice and pasta in an average time of 45 minutes and still going as a solar oven, making pizza baking and meat. These cooking times do not differ much from the cooking times on a gas stove, it becomes the solar cooker as a good consumer acceptance, and furthermore not to deliver the same gases that can poison the food as with the wood stove. Proves the viability of using the stove to cook or bake in two daily meals for a family, still presenting a position to improve his performance with the addition of new materials, equipment and techniques

Compósito reforçado com sisal para aplicação na moda

The objective of this research is the fabrication of a composite reinforced with dyed sisal fiber and polyester matrix for application in the fields such as, fashion, clothing, interior textiles; fashion accessories are some of the examples. For the fabrication of the composite, the sisal fibers were subjected to processes such as: chemical treatment with sodium hydroxide (NaOH) in the removal of impurities; bleaching for removing the yellowish color of the natural fiber and dyeing with direct dyes to confer the colors blue, green and orange. The search for new technologies ecologically correct has become a major concern in recent decades. Studies show that composite polymer reinforced by natural fibers is suitable for a large number of applications, and its use is advantageous in terms of economic and ecological. The dyed fibers were cut to a length of 30 mm, is used in the confection of webs. For this purpose, a web preparer by immersion, developed in the Laboratory of Chemical Textile of UFRN. The composite sheets measuring 300 x 300 x3 mm were molded by compression, with unsaturated orthophthalic polyester as matrix, and the samples in sizes 150 x 25 x 3 mm were cut with the aid of a laser machine, to be subjected to traction and flexion. The mechanical properties of traction and flexion in three points were performed in the Laboratory of metal and mechanical tests of Materials Engineering of UFRN. The resulting samples from the tests were evaluated in scanning electron microscope (SEM) at CTGas RN. On the basis of the analysis of the results from the mechanical tests, it was observed that the composite had good mechanical behavior, both in traction as in flexion. Furthermore, it was observed that in the water absorption test, the samples had a different percentage among themselves, this occurred due to the variation of density found in the fibre webs. The images of the SEM showed the failures from the manufacturing process and the adhesion of fibre/matrix. When the samples were prepared with the dyed fibers to be applied in fashion, the results were positive, and it can be concluded that the main objective of this work was achieved

Caracterização e análise das propriedades da fibra de Macambira (Bromelia Laciniosa)

Concern for the environment and the exploitation of natural resources has motivated the development of research in lignocellulosic materials, mainly from plant fibers. The major attraction of these materials include the fact that the fibers are biodegradable, they are a renewable natural resource, low cost and they usually produce less wear on equipment manufacturing when compared with synthetic fibers. Its applications are focused on the areas of technology, including automotive, aerospace, marine, civil, among others, due to the advantageous use in economic and ecological terms. Therefore, this study aims to characterize and analyze the properties of plant fiber macambira (bromelia laciniosa), which were obtained in the municipality of Ielmo Marino, in the state of Rio Grande do Norte, located in the region of the Wasteland Potiguar. The characterization of the fiber is given by SEM analysis, tensile test, TG, FTIR, chemical analysis, in addition to obtaining his title and density. The results showed that the extraction of the fibers, only 0.5% of the material is converted into fibers. The results for title and density were satisfactory when compared with other fibers of the same nature. Its structure is composed of microfibrils and its surface is roughened. The cross section has a non-uniform geometry, therefore, it is understood that its diameter is variable along the entire fiber. Values for tensile strength were lower than those of sisal fibers and curauá. The degradation temperature remained equivalent to the degradation temperatures of other vegetable fibers. In FTIR analysis showed that the heat treatment may be an alternative to making the fiber hydrophobic, since, at high temperature can remove the hemicellulose layer, responsible for moisture absorption. Its chemical constitution is endowed with elements of polar nature, so their moisture is around 8.5% which is equivalent to the percentage of moisture content of hydrophilic fibers. It can be concluded that the fiber macambira stands as an alternative materials from renewable sources and depending on the actual application and purpose, it may achieve satisfactory results

Viabilidade térmica de um forno solar fabricado com sucatas de pneus

The proposed design provides a solar furnace alternative, box-like, low-cost operation to be used in cooking, comprising three scrap tires to make the recycling thereof. The tires were coupled to each other, forming an enclosure, which stood on its bottom covered by a parable multiple mirrors made from a urupema (sieve indigenous) and the inner sides of the oven aluminum sheet painted black, obtained from beer cans, thus being made to obtain the increase in the concentration of solar radiation incident on the inside of the prototype studied. Two tires were attached, leaving an air layer between them, with the function of thermal insulation. The third tire aimed to support the other two and thermally insulate the bottom of the oven. Externally was placed a metal frame with flat mirrors to reflect the incident rays into the oven, having a mobility to correct the apparent motion of the sun. Its primary feature is the viability of clean, renewable energy to society by tackling the ecological damage caused by the large-scale use of wood for cooking food. The tests show that the furnace reached the maximum temperature of 123.8 °C and baking various foods such as pizza, bun, and other lasagne in an average time 50 minutes. Proves the feasibility of using the oven. Presenting still able to improve their performance with the addition of new materials, equipment and techniques

Normas jurídicas para a restauração ecológica: uma barreira a mais a dificultar o êxito das iniciativas?

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Distribuição ecológica das comunidades de macroalgas da bacia de drenagem do Rio das Pedras, região Centro-Sul do Estado do Paraná, Sul do Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Contribuições de uma unidade de ensino potencialmente significativa UEPS para o ensino de ecologia em escola pública da educação básica

The research aims to evaluate the contributions of a teaching unit to enhance the learning contents ecological green areas in elementary school. The work was conducted with elementary students in a public school in Natal-RN. We sought to identify the students´ previous knowledge about the contents of ecology, develop and implement a Potentially Meaningful Teaching Units PMTU; assess learning of ecological concepts in Teaching Unit Potentially Significant; assess the contribution of interpretative trail as strategy teaching to learning content ecology. The survey of students´ previous knowledge through the pre-test was essential to identify the appropriate subsumers and partially correct, since they served as "anchor" for further expansion of scientific concepts contained in this research. The green areas of the school as an educational, contributed the motivational aspect, as students were protagonists throughout the entire process of teaching and learning. The method of stimulated memory was effective to evidence learning ecological concepts in interpretive trails. The use of diverse activities organized on a PMTU promoted intellectual autonomy of the students and facilitated the acquisition of new meanings through progressive differentiation, and integrative reconciliation consolidation of ecological content and concepts related to biotic and abiotic factors on the basis of the central ideas thematic Life and Environment. The development of procedural skills to capture and share meanings, observe, collect and record data, hypotheses, ability to explain, to apply knowledge to solve problem situations, argue, identify, compare, differentiate and relate concepts, negotiate meanings, reflecting Critically, systematize data was evidenced. Collaborative activities promoted the incorporation of attitudinal contents as developing respect for differences, learn to work in teams to plan, develop and implement actions together for citizenship and environmental responsibility. The application of the Potentially Meaningful Teaching Units PMTU showed evidence of Critical meaningful learning ecological concepts covered in elementary school.

Indicadores de alteração hidrológica no Alto Rio Paraná: intervenções humanas e implicações na dinâmica do ambiente fluvial

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Padrões cariotípicos em tetraodontiformes (Osteichthypes) :redução genômica e mecanismos de diversificação

The Tetraodontiformes order is composed for about 400 species of fish, distributed in ten families, with circuntropical distribution. The morphologic diversity of each family reflects in, part, the different levels of specialization. This group represents an ancestry after-Perciformes and constitutes the last branch of the diffusion of the Teleósteos, occupying a position of prominence. The phylogenetics relationships of the Tetraodontiformes exist diverse works examining and, in all, these families are recognized as groups brothers, being Diodontidae next to Tetraodontidae and Balistidae next to Monacanthidae. Although it possesss a representative number of species, the works involving of the families Balistidae and Monacanthidae are few exemplary, especially species of oceanic islands. In this work cytogenetic studies in five species had been analyzed Cantherhines macrocerus, Cantherhines pullus (Monacanthidae), Melichthys niger (Balistidae), Sphoeroides testudíneus (Tetraodontidae) and Chilomycterus antennatus (Diodontidae); through conventional coloration, Ag-NORs and C banding. Ahead of the different karyological trends of evolution presented by the Tetraodontiformes, the present work also searched to verify the relation existence enters the total size of the chromosomes with the amount of DNA in these groups of Tetraodontiformes. For such, they had been correlated the total size of the chromosomes of these species, with values of content of available DNA in literature. The cytogenetics analyses for the species C.macrocerusJ C.pullus (Monacanthidae) and M.niger (Balistidae), had disclosed 40 chromosomes, all acrocentrics. All possess only one pair of NORs and pericentromeric heterochromatin. For S.testudíneus the found dyploid number was equal 2n=46, with NF=78 (16m+18sm+8st+4a), while that for C.antennatus it possesss 2n=50, with NF=76 (4m+22st+24a). Both species possess simple NORs and pericentromeric heterochromatin blocks. In M.niger, the presence of positive marking (heterochromatin and NOR) in the secondary constriction in the second chromosomic pair suggesting the occurrence of a rearrangement, possibly a fusing involving these homologous ones, indicating that these events had been important for the establishment of the karyological history of this group. A maintenance of the chromosomic constancy found in the populations of C.macrocerus (Monacanthidae) and S.testudineus (Tetraodontidae) perhaps if must for the aiding of the gene flow through oceanic chains. These data contrast with the differentiated kinds of chromosomes of C.antennatus between the Northeast coast and Southeastern, suggesting that the ecological standards of each species, added to the conditions of the marine environment, can be responsible for the karyological delineation of each species. The found characteristics for the species C.macrocerus, C.pullus, M.niger, S.testudineus and C.antennatus add it the available data for other species of Tetraodontiformes. From the data gotten in the present study, it can be inferred that the DNA content possesss direct relation with the total length of the chromosomes

Retificação da alumina com rebolo diamantado utilizando-se diferentes métodos de lubri-refrigeração

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Distribuição espacial, formação de grupos, uso do hábitat e ecologia comportamental de jovens de tubarão limão, negaprion brevirostris (poey 1868), no arquipélago de fernando de noronha

Lemon sharks, Negaprion brevirostris, are common in the Fernando de Noronha Archipelago, but detailed information about the species in this site is lacking. The aim of this study was to describe the spatial distribution, grouping behavior, habitat use and behavioral ecology of juvenile lemon sharks in the archipelago, and their interaction with some environmental and ecological factors. During 2006 and 2007, the presence and spatial distribution of juvenile sharks were quantified through scuba diving and snorkeling at several sites of the archipelago. In 2008 the habitat use of juvenile sharks was quantified through visual census while snorkeling along 300 x 8 m strip transects. During these transects the grouping behavior of lemon sharks was quantified by ad libitum. Results indicate that Fernando de Noronha Archipelago is used as a nursery area for lemon sharks, and the parturition occurs from November to April. Juveniles preferred using shallower areas available by the tide variation and formed groups only in the presence of adult conspecifics. This preference for shallower habitats and the group behavior probably are anti-predatory tactics used by juvenile lemon sharks, in response to the low availability of shelter and high predation risk of the studied areas. Quantifications of prey availability and predation risk of juveniles showed that, in general, lemon sharks are trading-off food by security and investing in sites with higher possibility of energetic return. Behavioral observations enabled to record juvenile carangid fishes following juvenile lemon sharks, remora host-parasite and juvenile sharks foraging on schools of herrings and octopuses. We also recorded the behavior of juvenile sharks following conspecifics of similar size, circling with two or three individuals and smaller individuals giving way to larger juveniles. When adults are present, juvenile lemon sharks are more social than solitary, indicating that predation is one of the factors that contribute to social behaviors of the species. Results also suggest that when grouped the juveniles have a hierarchical organization according to body size. Furthermore, observation of large adult females with several fresh mating bites and scars in the same habitats used by juvenile lemon sharks, indicates that Fernando de Noronha Archipelago is used as nursery and mating grounds by this species

Ecologia comportamental reprodutiva de Diastatops obscura Fabricius (Insecta, Odonata)

In this thesis I discuss the reproductive behaviour and ecology of the libellulid Diastatops obscura Fabricius, 1775, (Insecta: Odonata) in natural conditions. Populations of this species were studied on the middle stretch of the Pitimbu River, Parnamirim municipality, Rio Grande do Norte, Brazil, during four discontinuous periods between 2002 and 2004. The objectives include the description of strategies and behaviors of both sexes, with especial interest in the intra-male competition for territories and females, the mate selection by females and the importance of male body size and other secondary characters on their reproductive success; from an adaptationist point of view. It was observed that the behavior of males and females in the reproductive areas are interrelated : the males came earlier to compete for the best territories and the females waited the result of that competition to be fertilized by dominants males, which preferably occupied areas near the river margin. The reproductive success of males with territories on the margin, estimated by number of copulations, ovipositions and days acting as territorial, was better than obtained by more separated territorial males and by satellite males. The body size of males is an important factor for the copulation and oviposition taxes and for the number of territorial days, favoring the biggest individuals. I also discuss the apparently importance of wing brilliance and wing integrity on male reproductive success. On inter-sexual relationships, I proved that females of D. obscura participate in mate selection, rejecting non-territorial males or substituting their sperm for other of higher status

As competições sociais em grupos de Callithrix jacchus (Callitrichidae, Primates) são influenciadas pelo parentesco e pela convivência?

The Callitrichidae family is characterized by flexibility in its mating system, being possible to find monogamous, polyandrid and polygynic groups. Its social organization and mating system can be defined by the interaction between ecological and demographic factors plus the degree of relatedness among the individuals in the population. The objective of this work was to demonstrate the influence of relatedness and coexistence on the establishment and maintenance of social relations between Callithrix jacchus adult males. Four pairs of related adult males (CP), 4 pairs with coexistence between the animals in the pair (CC) and 4 pairs with no relatedness (SP) were studied. The pairs in the group CC had been kept in the same cage for at least 8 months before the experiment and the pairs in the group SP were put together at the beginning of the study. Each animal was observed 3 times/week for 2 months, in 15 min. sessions, through focal time sampling with instantaneous record each minute. In the first month, only the pair of males was kept in the cage (Phase I) and in the second month, a female was introduced into the cage (Phase II). The affiliative, agonistic and sexual interactions were registered. Affiliative interactions showed similar frequencies for all groups in phases. There was also no significant difference in the agonistic interactions of the CP, CC and SP males in Pase I, even considering that group SP exhibited higher levels of agonism. In Phase II, there was a statistically significant increase comparing to the others. The results demonstrate that relatedness and coexistence are of great importance for maintaining reprodutive and social stability inside the group. Nonetheless, in this study, only one of the males in the pair had sexual interations with the females, except for 2 pairs. This was assured through mate guarding and agonism directed to the potencial competitor. The most probable mating system would be functional monogamy, where the males would present low levels of competition, if there is relatedness and coexistence among them; on the other hand, a strong competition if there is no relatedness between the individuals. Even so, a polyandric system would also have to be considered

Dieta e compotamento de forrageio de duas espécies de Tropidurus (Squamata,Tropiduridae) em uma área de Caatinga do Nordeste do Brasil

Tropidurus semitaeniatus and Tropidurus hispidus are lizard species that are widely distributed in Brazil. The former is endemic to the Caatingas, where they live in syntopy with the latter, which is distributed in other ecosystems and biomes. In this work, diet was evaluated including seasonal variations as well as foraging behavior, to determine the importance of these factors in the structure of these populations and the coexistence of these species in syntopy. No significant difference was found in diet composition between the two species, although T. hispidus feed on larger preys than do T. semitaeniatus; this fact, along with the different foraging behavior in the rainy season, are ecological factors that contribute to the syntopic coexistence of these species in the Caatinga area studied