The Use of Cryogenic Air in Supplied Air Respiratory Protection

The Mine Improvement and New Emergency Response (MINER) Act of 2006 implemented new regulations in the underground coal mining industry that allow for the certification of non-compressed gas equipment for respiratory protection in underground coal mines. NASA’s Kennedy Space Center (KSC) Biomedical Research and Engineering Laboratory (BRL) is investigating the potential to expand cryogenic air supply systems into the mining and general industries. These investigations have, so far, resulted in four separate comparison and hardware development programs. The Propellant Handlers Ensemble (PHE) and Level “A” Ensemble Comparison (LAE): This study compared worker thermal stress while using the industry standard Level A hazardous material handling ensemble as opposed to using the similarly protective Propellant Handler’s Ensemble (PHE) that utilizes a cryogenic air supply pack, known as an Environmental Control Unit (ECU) as opposed to the compressed air Self Contained Breathing Apparatus (SCBA) used in the LAE. The research found that, in a 102°F environment, test subjects experienced significantly decreased body temperature increases, significantly decreased heart rate increases, and decreased sweat loss while performing a standard work routine while using the PHE, compared to the same test subjects performing the same routine while using the LAE. The Cryogenic Refuge Alternative Supply System (CryoRASS) project: The MINER Act of 2006 requires the operators of underground coal mines to provide refuge alternatives that can provide a safe atmosphere for workers for up to 96 hours in the event of a mine emergency. The CryoRASS project retrofitted an existing refuge chamber with a liquid air supply instead of the standard compressed air supply system and performed a 96 hour test. The CryoRASS system demonstrated that it provided a larger air supply in a significantly smaller footprint area, provided humidity and temperature control, and maintained acceptable oxygen and carbon dioxide levels in the chamber for the required amount of time. SCBA and Mine Rescue System (CryoBA/CryoASFS) Another requirement of the MINER Act is that additional emergency breathing equipment must be staged along evacuation routes to supplement the Self Contained/Self Rescue (SCSR) devices that are now required. The BRL has developed an SCBA known as the Cryogenic Breathing Apparatus (CryoBA), that has the ability to provide 2 hours of breathing air, a refill capability, and some cooling for the user. Cryogenic Air Storage and Filling Stations (CryoASFS) would be positioned in critical areas to extend evacuation time. The CryoASFS stations have a significantly smaller footprint and larger air storage capacity to similar compressed air systems. The CryoBA pack is currently undergoing NIOSH certification testing. Technical challenges associated with liquid breathing air systems: Research done by the BRL has also addressed three major technical challenges involved with the widespread use of liquid breathing air. The BRL developed a storage Dewar fitted with a Cryorefrigerator that has stored liquid air for four months with no appreciable oxygen enrichment due to differential evaporation. Testing of liquid breathing air was material and time intensive. A BRL contract developed a system that only required 1 liter of air and five minutes of time compared to the 10 liters of air and 75 minutes of time required by the old method. The BRL also developed a simple and cost effective method of manufacturing liquid air that joins a liquid oxygen tanker with a liquid nitrogen tanker through an orifice controlled “Y” fitting, mixing the two components, and depositing the mixed breathing air in a separate tanker.

Multi-kilowatt peak power nanosecond Er-doped fiber laser

We report a two-stage diode-pumped Er-doped fiber amplifier operating at the wavelength of 1550 nm at the repetition rate of 10-100 kHz with an average output power of up to 10 W. The first stage comprising Er-doped fiber was core-pumped at the wavelength of 1480 nm, whereas the second stage comprising double-clad Er/Yb-doped fiber was clad-pumped at the wavelength of 975 nm. The estimated peak power for the 0.4-nm full-width at half-maximum laser emission at the wavelength of 1550 nm exceeded 4-kW level. The initial 100-ns seed diode laser pulse was compressed to 3.5 ns as a result of the 34-dB total amplification. The observed 30-fold efficient pulse compression reveals a promising new nonlinear optical technique for the generation of high power short pulses for applications in eye-safe ranging and micromachining.

SC revenue ruling #16-1

After several inquiries from the trucking industry, the Department of Revenue established the conversion factors for compressed natural gas and liquefied natural gas in August, 2014. This advisory opinion now represents the Department’s official position concerning these conversion factors. The Department also recently established the conversion factor for liquefied propane gas. This advisory now represents the Department’s official position concerning this conversion factor.

Quick concrete

QUICK CONCRETE es un emprendimiento el cual se planteó como una empresa prestadora de servicios en el sector de la construcción en la ciudad de Ibagué, Colombia. Con ayuda de empresas ya reconocidas a nivel regional como lo son: la distribuidora de materiales y ferretería La Española, A&C y la ladrillera Ladrillos Roma. Se espera impactar en el mercado con un método diferente y un precio competitivo de servicio. El mayor impulso de la construcción puede estar asociado a una mayor demanda de vivienda por parte de ciudadanos bogotanos que ven en Ibagué una posibilidad rentable para invertir en vivienda, así como también el crecimiento del comercio que requiere la construcción de centros comerciales y el programa de viviendas de interés social del Gobierno que benefició a Ibague. Sin embargo, este es una actividad bastante cíclica y con una alta rotación de trabajadores.

Exploración de viabilidad sobre ideas de aplicaciones en el mercado colombiano

La economía mundial cambia a un ritmo vertiginoso y exponencial gracias a la rápida transformación de la tecnología. Diferentes dinámicas como el crecimiento en cobertura del internet; la creciente facilidad de obtención de una tarjeta de crédito; la popularización del uso de smartphones; y el crecimiento en uso del comercio electrónico; han dado cabida a la aparición de nuevos tipos de negocio, como el de servicios electrónicos y aplicaciones, que hace algunas décadas atrás eran inviables. Teniendo en cuenta estos cambios, el presente documento plantea tres diferentes modelos de aplicación para smartphones, se hace un análisis detallado de la viabilidad para cada uno para identificar así el que cuenta con mayores probabilidades de éxito. Finalmente se profundiza en este con un análisis financiero y de mercadotecnia para así hacer las respectivas correcciones al modelo inicial y obtener como resultado la versión más viable del modelo seleccionado.

Creación del área de ventas y mercadeo para Industrias Leader Ltda.

El departamento de mercadeo y ventas es fundamental en una empresa debido a que es el encargado de desarrollar e implementar estrategias que satisfagan las necesidades y requerimientos del cliente. Es aquí donde más se puede ver reflejado el aumento de las ventas de la empresa. El servicio al cliente, la relación con el mismo y el acompañamiento, es un tema muy importante a tratar, tanto para atraer a nuevos clientes como también para conservar a los clientes actuales. Este trabajo se desarrolló con base en la problemática de la creciente pérdida de clientes de la empresa Leader Ltda., y tiene como objetivo diseñar y crear un plan de mercadeo y ventas para la misma. Por medio de un estudio no experimental, descriptivo e interpretativo  se enfocó en diferentes análisis internos y externos de la compañía para poder desarrollar un plan de acción que se pueda implementar en la compañía.

Methods of earth building in the Huila Province, Angola

In Angola, the construction made of raw earth is a cultural heritage widely used by low income households, representing over 80% of the population [1, 3]. In Huila province is evident construction in raw earth in a large scale, either in urban or in periurban and rural areas. The construction methods follow the ancestral standards, distributed throughout the region of Huila, being built by the several ethnic groups. Among the construction techniques in earth, stand out: the adobe, wattle-and-daub and more recently on CEB (Compressed Earth Block). The type of soil used to make the adobes is mainly silty-clayed sand [1]. The most applied materials are: rods, reeds, wood, grass, straw, soil and stone, almost with the same characteristics [2]. The manufacture of adobe, consists essentially in mixing clay and grass (plant fibers), then put the mixture inside a wooden mold, having a size of 42 cm long and 18 cm high and taking three to four days to dry and be applied in housing construction. The application of these materials makes the construction less expensive because they are collected, transformed and applied by the owner himself of housing without any project, based only on the result of the practice and experience acquired from their ancestors. They are simple constructions, presenting a typology of grouped and isolated single-family housing, ranging between 2 and 3 bedrooms [2]. The construction techniques used in such small housings have positive environmental aspects, both as regards the materials employed, such as the manner in which the constructions are raised, showing special concerns for the quality improvement of them, as regards the resistance, durability and comfort [4].

Large scale underground energy storage for renewables integration: general criteria for reservoir identification and viable technologies.

The increasing integration of renewable energies in the electricity grid contributes considerably to achieve the European Union goals on energy and Greenhouse Gases (GHG) emissions reduction. However, it also brings problems to grid management. Large scale energy storage can provide the means for a better integration of the renewable energy sources, for balancing supply and demand, to increase energy security, to enhance a better management of the grid and also to converge towards a low carbon economy. Geological formations have the potential to store large volumes of fluids with minimal impact to environment and society. One of the ways to ensure a large scale energy storage is to use the storage capacity in geological reservoir. In fact, there are several viable technologies for underground energy storage, as well as several types of underground reservoirs that can be considered. The geological energy storage technologies considered in this research were: Underground Gas Storage (UGS), Hydrogen Storage (HS), Compressed Air Energy Storage (CAES), Underground Pumped Hydro Storage (UPHS) and Thermal Energy Storage (TES). For these different types of underground energy storage technologies there are several types of geological reservoirs that can be suitable, namely: depleted hydrocarbon reservoirs, aquifers, salt formations and caverns, engineered rock caverns and abandoned mines. Specific site screening criteria are applicable to each of these reservoir types and technologies, which determines the viability of the reservoir itself, and of the technology for any particular site. This paper presents a review of the criteria applied in the scope of the Portuguese contribution to the EU funded project ESTMAP – Energy Storage Mapping and Planning.

Hoja Picagres: Uso de la Tierra

Proyecto de Actualización Cartográfica de usos de la Tierra a escala 1:10.000 GAM de Costa Rica. Elaboración de Cartografía digital y Ortofotos.

Hoja Porrosatí: Uso de la Tierra

Proyecto de Actualización Cartográfica de usos de la Tierra a escala 1:10.000 GAM de Costa Rica. Elaboración de Cartografía digital y Ortofotos.

Hoja Purires: Uso de la Tierra

Proyecto de Actualización Cartográfica de usos de la Tierra a escala 1:10.000 GAM de Costa Rica. Elaboración de Cartografía digital y Ortofotos.

Hoja Puente de Piedra: Uso de la Tierra

Proyecto de Actualización Cartográfica de usos de la Tierra a escala 1:10.000 GAM de Costa Rica. Elaboración de Cartografía digital y Ortofotos.

Hoja Punta de lanza: Uso de la Tierra

Proyecto de Actualización Cartográfica de usos de la Tierra a escala 1:10.000 GAM de Costa Rica. Elaboración de Cartografía digital y Ortofotos.

Hoja Purisil: Uso de la Tierra

Proyecto de Actualización Cartográfica de usos de la Tierra a escala 1:10.000 GAM de Costa Rica. Elaboración de Cartografía digital y Ortofotos.

Hoja Quelital: Uso de la Tierra

Proyecto de Actualización Cartográfica de usos de la Tierra a escala 1:10.000 GAM de Costa Rica. Elaboración de Cartografía digital y Ortofotos.