Un deseo moderno todavía pendiente : la casa patio, una posible técnica de agrupación de vivienda colectiva vertical

La idea de aportar a la vivienda en altura las cualidades de la casa patio, se ha estudiado durante años. Podemos decir que el origen de este análisis se inició en 1922 cuando Le Corbusier empezó a investigar a cerca de los Inmuebles Villa; sin duda sabemos que ha llegado hasta la actualidad. Ayudado por la labor de búsqueda de diferentes arquitectos a lo largo de la historia, podemos afirmar que todos los casos conforman una idea única de proyecto. La idea de agrupar casas patio en altura manteniendo las características propias de este tipo de viviendas, privacidad, espacio libre, apertura cenital, comunicación interior‐exterior… Los Inmuebles‐Villa serán repetidamente aludidos, citados o retomados como un tipo paradigmático entre las propuestas de agrupaciones de casas patio en altura. Si pensamos en el concepto tradicional de patio, denominarlo como un espacio de viviendas apiladas en altura no parece una elección adecuada, no obstante la noción de patio permite una gran cantidad de asociaciones. Su valor radica en el traslado de una idea conocida a un nuevo contexto, produciendo así una reformulación del problema. Elegimos para este proceso, la vivienda colectiva, entendiendo la colectividad como agrupación, pues es esta agrupación de vivienda la encargada de crear ciudad; así no sólo vale la pena dar importancia a una célula con su independencia, sino en la relación que estas establecen con sus semejantes. De ahí la idea de que esa colectividad de casas patio, pueda darse también en vertical, buscando las condiciones antes mencionadas. Un deseo que apareció en el Movimiento Moderno y que desde ese momento ha sido algo anhelado por la arquitectura hasta nuestros días. El patio se presenta en la mayoría de las ocasiones como un espacio con múltiples afecciones, desde el patio que aporta a la vivienda una zona de esparcimiento hasta un espacio destinado a la ventilación, aunque en definitiva, podemos decir que consiste en un espacio capaz de contener un lugar. Quizás por eso aparece de diversas formas en nuestra arquitectura, sin importar su ubicación o forma. Simplemente un espacio que aporta al interior unas características que esas viviendas nunca alcanzarían sin él. Por eso lo que conocemos como casa patio es un tipo de arquitectura que se extiende hasta la antigüedad. Ese concepto de espacio exterior incorporado a la vivienda es una de las piezas fundamentales en nuestra arquitectura. Una idea ampliamente estudiada que deja a un lado los diferentes tipos de “patio” que fueron apareciendo, así como las múltiples funciones que dichos espacios fueron capaces de llevar a cabo, primando en definitiva la forma en la que cambiaron la idea de habitar. A lo largo de este análisis se han ido hallando evidencias de los múltiples mecanismos empleados en los casos estudiados. Como se ha visto, en ellos aparecen características que únicamente pueden aparecer en un espacio exterior cuando se trata de un patio. Los patios estudiados se consideran patios tradicionales, independientemente de la cota a la que se encuentren, aunque no cumplan alguna de las características a priori necesarias para la definición de patio. Para captar la esencia de esos espacios, no es necesario traspasar sus límites, ya que ésta se irradia al interior e invade la atmósfera de los espacios contiguos. Se plantea como objetivo principal rastrear las huellas de una investigación proyectual que Le Corbusier inaugura y deja abierta; se trata de descubrir qué ecos, qué rebotes, qué repercusiones tiene el concepto de patio en altura a lo largo de su historia. En esta búsqueda de identificación de las características de estos espacios, hemos seleccionado tres casos, partiendo de las experiencias tanto en patios tradicionales como en patios en altura de tres maestros como son Le Corbusier, José Luis Sert y Charles Correa. Los casos estudiados podrían haber sido muchos más. Este número supone solo un ejemplo de un universo mayor, que ha sido operativo para el desarrollo de este trabajo. Ellos nos guiarán por su arquitectura para intentar resolver la idea de los patios en altura. Hemos analizado las influencias proyectuales existentes entre algunos de los casos que forman parte de esta reflexión, entre los que existen unos vínculos claros, que pueden ser esas claves que estamos buscando para resolver la agrupación de casa patio en altura. A través de este trabajo se ha puesto de manifiesto que la aplicación del concepto de casas patio en altura depende tanto de su ubicación, del clima y la cultura local, como el tipo de patio del que se parte. De estos conceptos surgen soluciones diferentes entre ellas y por tanto no pueden extrapolarse una sola idea a todos los casos. Algunas ideas están presentes durante toda la investigación: fachadas como resultado de la repetición de células, sucesión de espacios, plantas de casas patio tradicional, dobles alturas…Otros casos destacan por su singularidad, por haber buscado la solución del problema mediante la originalidad. En definitiva buscamos casas patio en altura. Y si esta tesis contribuye, en alguna medida, a obtener las claves para que esta tipología edificatoria funcione, de sus características, sus necesidades, y su resultado, es decir, de su búsqueda de ese deseo moderno que presentábamos al principio, será entonces que esa tipología ilusoria, sea una arquitectura real, y por lo tanto también podrá llevarse a cabo y dejar de ser un deseo para convertirse en realidad. Sera que el deseo moderno se ha cumplido. ABSTRACT The idea of giving housing the height of the patio housing qualities, it has been studied for ages. It can be said that the origin of this analysis was started in 1922, when Le Cobustier began investigating about The Villa Building: obviously it is known nowadays due to different architect’s labor of searching through the history. It’s easy to say that all the cases shape a single project idea , the idea of gathering patio houses with the same height keeping the inner characteristics of traditional patio houses such privacy, free space, zenithal opening, inside –outside communication…etc. If we thought about the traditional concept of patio, to define it, in the case of gathering because of the height, it is not suitable to consider it like a pile of houses with the same height. Nevertheless the concept of patio allows a wide variety of settlements. Its worth is based on the transference of a renowned idea into a new context, producing thus a reformulation of the problem. The patio is frequently disposed like a zone with multiple utilities, from the leisure zone patio to an air circulating space, definitively it can be said that it consists on a space which is able to content a place. Maybe that is why it appears in various forms in our architecture, regardless of its placement or shape. It is simply a space which provides many features which are impossible to reach without it. That is what we know as patio house is a type of architecture which is spread till antiquity. This concept of outdoors space joined housing is one of the main pieces of our architecture. It is an idea wide analyses which lefts aside the different types of patios which were developed, focusing mainly the way they changed the idea of inhabiting. We have chosen for this analysis process, the collective housing, we understood collective like group, thus it is the group of housing responsible to built up a city, not just it is worth to give importance to an independent cell, in addition to the relation which those ones can stablish with their similar ones. Due to the idea of collectivity of patio houses, it can be also developed in vertical, looking for the previously mention condition. A wish which appeared with the modern movement and since then it has been something desired by architecture just nowadays. It is understood as the main target to follow the trail about a project investigation which was begun and left open by Le Cobustier: the task is discovering the resonances, the bounces and repercussions which belong to the patio concept in height through its history. In this quest to distinguish the characteristics of these spaces, we have chosen three cases, starting from the experiences as traditional patios as in the height of patios of the masters such as Le Cobustier, Jose Luis Sert and Charles Correa. The studied cases could be even more. This number is just an example of a huger universe, which has been operational for the developing of this work. We will be managed through their architecture trying to solve the idea of patios according to their height. Over this analysis evidences there are found multiple mechanics used in the studied cases. As we could see later, in these ones there are characteristics which are only found in an outdoors space when it is a patio. The studied patios are considered traditional patios, independently of the level they have, although they do not fit at first some of the necessary characteristics included in a patio definition. To catch the essence of those spaces, it is not necessary to go through its limits, since it is transmitted to the interior and pervades the adjoining spaces. It has been analyzed the project influences exiting among several cases which build up part of this consideration , among them there are some clear links, which may be these keys we are looking for to solve the joint of patio houses in height. With this work it has been highlighted that the application of the patios houses in height concept depends not only on its placement, the weather and the local culture, but also on the type of patio we are using. From these considerations different solutions were given by themselves as consequence they can be extrapolated into a single idea for all the cases. Some ideas are present along the complete investigation: facades resulting from cells repetition, series of spaces, traditional patio house floor, double height… Some other cases stand out due to it singularity, because they have searched for a solution to the problem by means of originality. To sum up, we look for patio houses in height. And if this thesis contributes, in some way, to get the clues to make work this type of building, about its characteristics, its necessities and its result, in other words, its searching of this modern desire that we showed at the beginning, then this imaginary typo will be a real architecture therefore it can also come truth and can abandon the form of wish to became into a reality. So the modern desire has been fulfilled.

HIP HOP COMO PROCESSO COMUNICACIONAL E SOCIABILIDADE PARA JOVENS INDÍGENAS DE DOURADOS – MS

Estudo sobre o Hip Hop como processo comunicacional e sociabilidade entre jovens indígenas de Dourados, Mato Grosso do Sul, para verificar quais os principais objetivos da prática do movimento Hip Hop, compreender se serve como comunicação, contribui para o fortalecimento da língua guarani ou gera novas tensões sociais na reserva. Para tanto, foi analisado aspectos históricos do movimento, passando pelos Estudos Culturais, e como Movimento Social, dando início à discussão de uma voz alternativa por meio do Hip Hop. Do ponto de vista metodológico, trata-se de um de estudo de caso, com representantes dos grupos de jovens Brô Mc's e Jovens Conscientes, das reservas Jaguapirú e Bororó, das etnias Guarani-Kaiowá de Dourados (MS). Foram realizadas entrevistas semiestruturadas junto a jovens que participaram das oficinas de hip hop, das lideranças indígenas e professores. A investigação é complementada pela pesquisa bibliográfica, documental e análises das letras de rap em confrontação com as visões da imprensa, a partir da análise dos jornais Diário MS e O Progresso. Os resultados apontam que os jovens se apropriam de uma cultura global para transformar o ambiente local com objetivo de preservar a língua guarani, uma alternativa para o conhecimento, logo para não seguirem caminhos como o das drogas. Negociando falas sobre sua realidade, dentro e fora da reserva, já que nos meios de comunicação locais há pouco espaço para a voz dos indígenas e dentro da reserva ainda há contestação do movimento em um contexto político, na tentativa de atingir uma cultura “pura”, devido à preocupação dos mais velhos com a perda de território.

A quantitative model for membrane fusion based on low-energy intermediates

The energetics of a fusion pathway is considered, starting from the contact site where two apposed membranes each locally protrude (as “nipples”) toward each other. The equilibrium distance between the tips of the two nipples is determined by a balance of physical forces: repulsion caused by hydration and attraction generated by fusion proteins. The energy to create the initial stalk, caused by bending of cis monolayer leaflets, is much less when the stalk forms between nipples rather than parallel flat membranes. The stalk cannot, however, expand by bending deformations alone, because this would necessitate the creation of a hydrophobic void of prohibitively high energy. But small movements of the lipids out of the plane of their monolayers allow transformation of the stalk into a modified stalk. This intermediate, not previously considered, is a low-energy structure that can reconfigure into a fusion pore via an additional intermediate, the prepore. The lipids of this latter structure are oriented as in a fusion pore, but the bilayer is locally compressed. All membrane rearrangements occur in a discrete local region without creation of an extended hemifusion diaphragm. Importantly, all steps of the proposed pathway are energetically feasible.

Solution structure of the 2-amino-1- methyl-6-phenylimidazo[4,5-b]pyridine C8-deoxyguanosine adduct in duplex DNA

The carcinogenic heterocyclic amine (HA) 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) is formed during the cooking of various meats. To enable structure/activity studies aimed at understanding how DNA damaged by a member of the HA class of compounds can ultimately lead to cancer, we have determined the first solution structure of an 11-mer duplex containing the C8-dG adduct formed by reaction with N-acetoxy-PhIP. A slow conformational exchange is observed in which the PhIP ligand either intercalates into the DNA helix by denaturing and displacing the modified base pair (main form) or is located outside the helix in a minimally perturbed B-DNA duplex (minor form). In the main base-displaced intercalation structure, the minor groove is widened, and the major groove is compressed at the lesion site because of the location of the bulky PhIP-N-methyl and phenyl ring in the minor groove; this distortion causes significant bending of the helix. The PhIP phenyl ring interacts with the phosphodiester-sugar ring backbone of the complementary strand and its fast rotation with respect to the intercalated imidazopyridine ring causes substantial distortions at this site, such as unwinding and bulging-out of the strand. The glycosidic torsion angle of the [PhIP]dG residue is syn, and the displaced guanine base is directed toward the 3′ end of the modified strand. This study contributes, to our knowledge, the first structural information on the biologically relevant HA class to a growing body of knowledge about how conformational similarities and differences for a variety of types of lesions can influence protein interactions and ultimately biological outcome.

Role of pili and the phase-variable PilC protein in natural competence for transformation of Neisseria gonorrhoeae.

The Gram-negative bacterial pathogen Neisseria gonorrhoeae is naturally competent for transformation with species-related DNA. We show here that two phase-variable pilus-associated proteins, the major pilus subunit (pilin, or PilE) and PilC, a factor known to function in the assembly and adherence of gonococcal pili, are essential for transformation competence. The PilE and PilC proteins are necessary for the conversion of linearized plasmid DNA carrying the Neisseria-specific DNA uptake signal into a DNase-resistant form. The biogenesis of typical pilus fibers is neither essential nor sufficient for this process. DNA uptake deficiency of defined piliated pilC1,2 double mutants can be complemented by expression of a cloned pilC2 gene in trans. The PilC defect can also be restored by the addition of purified PilC protein, or better, pili containing PilC protein, to the mutant gonococci. Our data suggest that the two phase-variable Pil proteins act on the bacterial cell surface and cooperate in DNA recognition and/or outer membrane translocation.

Desenvolvimento de dispositivo movimentador automatizado de amostras com vista à aplicação em medidas de radioosótopos que possuem curto tempo de meia-vida

Medidas de espectroscopia gama de alta resolução têm diversas aplicações. Aplicações envolvendo medidas de radioisótopos de meia-vida curta podem apresentar problemas de baixa precisão nas contagens quando a fonte radioativa está distante do detector e de perda de acurácia por efeitos de tempo morto e empilhamento de pulsos em situação de altas taxas de contagens. Um modo de minimizar esses problemas é alterando a posição da fonte radioativa durante o processo de medição, aproximando-a do detector conforme sua atividade diminui e assim maximizando o número de contagens medidas. Neste trabalho, foi desenvolvido o Movimentador de Amostras Radioativas Automatizado (MARA), um aparato de baixo custo, feito com materiais de baixo número atômico e leve, projetado e construído para auxiliar nas medidas de espectroscopia gama, capaz de controlar a distância entre a fonte e o detector, permitindo inclusive que ocorra alteração dessa distância durante o processo de medição. Por ser automatizado ele otimiza o tempo do operador, que tem total liberdade para criar suas rotinas de medidas no dispositivo, além de evitar que o mesmo tome uma parcela da dose radioativa. Foi também feita uma interface que permite controle do MARA e a programação do sistema de aquisição de dados. Foram realizados testes para otimização da operação do sistema MARA e foi verificada a segurança de operação do MARA, não apresentando nenhuma falha durante seus testes. Foi aplicado o teste de repetitividade, por meio de medições com uma fonte calibrada de 60Co, e verificou-se que o sistema de movimentação de prateleiras automatizado reproduziu os resultados do sistema estático com confiabilidade de 95%.

Search for isotropic γ radiation in the cosmological window between 65 and 200 TeV

Electromagnetic energy injected into the universe above a few hundred TeV is expected to pile up as γ radiation in a relatively narrow energy interval below 100 TeV due to its interaction with the 2.7^°K background radiation. We present an upper limit (90% C.L.) on the ratio of primary γ to charged cosmic rays in the energy interval 65–160 TeV (80–200 TeV) of 10.3 • 10^−3 (7.8 • 10^−3). Data from the HEGRA cosmic-ray detector complex consisting of a wide angle Čerenkov array (AIROBICC) measuring the lateral distribution of air Čerenkov light and a scintillator array, were used with a novel method to discriminate γ-ray and hadron induced air showers. If the presently unmeasured universal far infrared background radiation is not too intense, the result rules out a topological-defect origin of ultrahigh energy cosmic rays for masses of the X particle released by the defects equal to or larger than about 10^16 GeV.

Novo procedimento para a realização de análise capwap no ensaio de carregamento dinâmico em estacas pré-moldadas.

Desde a década de 1980 diversos autores apresentaram correlações entre provas de carga estática e ensaios de carregamento dinâmico em estacas. Para uma boa correlação é fundamental que os testes sejam bem executados e que atinjam a ruptura segundo algum critério, como o de Davisson, por exemplo, além de levar em conta o intervalo de tempo entre a execução da prova de carga estática e do ensaio dinâmico, face ao efeito \"set up\". Após a realização do ensaio dinâmico realiza-se a análise CAPWAP que permite a determinação da distribuição do atrito lateral em profundidade, a carga de ponta e outros parâmetros dos solos tais como quakes e damping. A análise CAPWAP é realizada por tentativas através do procedimento \"signal matching\", isto é, o melhor ajuste entre os sinais de força medido pelos sensores e o calculado. É relativamente fácil mostrar que a mesma solução pode ser obtida através de dados de entrada diferentes. Isso significa que apesar de apresentarem cargas mobilizadas próximas o formato da curva da simulação de prova de carga estática, obtida pelo CAPWAP, assim como a distribuição do atrito lateral, podem ser diferentes, mesmo que as análises apresentem \"match quality\" (MQWU) satisfatórios. Uma forma de corrigir o formato da curva simulada do CAPWAP, assim como a distribuição do atrito lateral, é através da comparação com provas de carga estática (PCE). A sobreposição das duas curvas, a simulada e a \"real\", permite a determinação do quake do fuste através do trecho inicial da curva carga-recalque da prova de carga estática, que por sua vez permite uma melhor definição da distribuição do atrito lateral e da reação de ponta. Neste contexto surge o conceito de \"match quality de recalques\" (MQR). Quando a PCE não está disponível, propõe-se efetuar um carregamento estático utilizando o peso próprio do martelo do bate-estaca (CEPM). Mostra-se, através de dois casos de obra, em que estavam disponíveis ensaios de carregamento dinâmico e PCEs, que esse procedimento permite obter uma melhor solução do ponto de vista físico, isto é consistente com as características do subsolo e com a curva carga-recalque da PCE, e não apenas matemático, através da avaliação do \"match quality\" (MQWU).

Confiabilidade aplicada ao problema de interação estaca-solo.

Este trabalho busca aplicar técnicas de confiabilidade ao problema de grupo de estacas utilizadas como fundação de estruturas correntes. Para isso, lança-se mão de um modelo tridimensional de interação estaca-solo onde estão presentes o Método dos Elementos de Contorno (MEC) e o método dos Elementos Finitos (MEF) que atuam de forma acoplada. O MEC, com as soluções fundamentais de Mindlin (meio semi-infinito, homogêneo, isotrópico e elástico-linear é utiliza), é utilizado para modelar o solo. Já o MEF é utilizado para modelar as estacas. Definido o modelo de funcionamento estrutural das estacas, parte-se para a aplicação de métodos trazidos da confiabilidade estrutural para avaliação da adequabilidade em relação aos estados limite de serviço e estados limites últimos. Os métodos de confiabilidade utilizados foram o Método de Monte Carlo, o método FOSM (First-Order Second-Moment) e o método FORM (First-Order Reliability Method).

Expression profiling and sequence diversity of novel DREB genes from common bean (Phaseolus vulgaris L.) and their association with drought-related traits

Common bean is a major dietary component in several countries, but its productivity is negatively affected by abiotic stresses. Dissecting candidate genes involved in abiotic stress tolerance is a paramount step toward the improvement of common bean performance under such constraints. Thereby, this thesis presents a systematic analysis of the DEHYDRATION RESPONSIVE ELEMENT-BINDING (DREB) gene subfamily, which encompasses genes that regulate several processes during stress responses, but with limited information for common bean. First, a series of in silico analyses with sequences retrieved from the P. vulgaris genome on Phytozome supported the categorization of 54 putative PvDREB genes distributed within six phylogenetic subgroups (A-1 to A-6), along the 11 chromosomes. Second, we cloned four novel PvDREB genes and determined their inducibility-factors, including the dehydration-, salinity- and cold-inducible genes PvDREB1F and PvDREB5A, and the dehydration- and cold-inducible genes PvDREB2A and PvDREB6B. Afterwards, nucleotide polymorphisms were searched through Sanger sequencing along those genes, revealing a high number of single nucleotide polymorphisms within PvDREB6B by the comparison of Mesoamerican and Andean genotypes. The nomenclature of PvDREB6B is discussed in details. Furthermore, we used the BARCBean6K_3 SNP platform to identify and genotype the closest SNP to each one of the 54 PvDREB genes. We selected PvDREB6B for a broader study encompassing a collection of wild common bean accessions of Mesoamerican origin. The population structure of the wild beans was accessed using sequence polymorphisms of PvDREB6B. The genetic clusters were partially associated with variation in latitude, altitude, precipitation and temperature throughout the areas such beans are distributed. With an emphasis on drought stress, an adapted tube-screening method in greenhouse conditions enabled the phenotyping of several drought-related traits in the wild collection. Interestingly, our data revealed a correlation between root depth, plant height and biomass and the environmental data of the location of the accessions. Correlation was also observed between the population structure determined through PvDREB6B and the environmental data. An association study combining data from the SNP array and DREB polymorphisms enabled the detection of SNP associated with drought-related traits through a compressed mixed linear model (CMLM) analysis. This thesis highlighted important features of DREB genes in common bean, revealing candidates for further strategies aimed at improvement of abiotic stress tolerance, with emphasis on drought tolerance

COMPENDIUM: A text summarization system for generating abstracts of research papers

This article analyzes the appropriateness of a text summarization system, COMPENDIUM, for generating abstracts of biomedical papers. Two approaches are suggested: an extractive (COMPENDIUM E), which only selects and extracts the most relevant sentences of the documents, and an abstractive-oriented one (COMPENDIUM E–A), thus facing also the challenge of abstractive summarization. This novel strategy combines extractive information, with some pieces of information of the article that have been previously compressed or fused. Specifically, in this article, we want to study: i) whether COMPENDIUM produces good summaries in the biomedical domain; ii) which summarization approach is more suitable; and iii) the opinion of real users towards automatic summaries. Therefore, two types of evaluation were performed: quantitative and qualitative, for evaluating both the information contained in the summaries, as well as the user satisfaction. Results show that extractive and abstractive-oriented summaries perform similarly as far as the information they contain, so both approaches are able to keep the relevant information of the source documents, but the latter is more appropriate from a human perspective, when a user satisfaction assessment is carried out. This also confirms the suitability of our suggested approach for generating summaries following an abstractive-oriented paradigm.

NO adsorption on Pt (111)/Bi surfaces

The adsorption of nitric oxide (NO) on a Pt (111) surface modified with irreversible adsorbed bismuth adatoms is reported. While the voltammetric results reveal a close interaction between the two co-adsorbed compounds. In-situ infrared spectroscopy and scanning tunnelling microscopy indicate the formation of segregated adlayers. Formation of compressed Bi adlayers with modified redox properties is proposed to reconcile both results. This agrees with the observation of Bi islands in the STM images when NO is coadsorbed, not observed in the absence of NO.

Adjustable compression method for still JPEG images

There are a large number of image processing applications that work with different performance requirements and available resources. Recent advances in image compression focus on reducing image size and processing time, but offer no real-time solutions for providing time/quality flexibility of the resulting image, such as using them to transmit the image contents of web pages. In this paper we propose a method for encoding still images based on the JPEG standard that allows the compression/decompression time cost and image quality to be adjusted to the needs of each application and to the bandwidth conditions of the network. The real-time control is based on a collection of adjustable parameters relating both to aspects of implementation and to the hardware with which the algorithm is processed. The proposed encoding system is evaluated in terms of compression ratio, processing delay and quality of the compressed image when compared with the standard method.

High-Pressure Methane Storage in Porous Materials: Are Carbon Materials in the Pole Position?

Natural gas storage on porous materials (ANG) is a promising alternative to conventional on-board compressed (CNG) or liquefied natural gas (LNG). To date, Metal–organic framework (MOF) materials have apparently been the only system published in the literature that is able to reach the new Department of Energy (DOE) value of 263 cm3 (STP: 273.15 K, 1 atm)/cm3; however, this value was obtained by using the ideal single-crystal density to calculate the volumetric capacity. Here, we prove experimentally, and for the first time, that properly designed activated carbon materials can really achieve the new DOE value while avoiding the additional drawback usually associated with MOF materials (i.e., the low mechanical stability under pressure (conforming), which is required for any practical application).

Steel Pedestrian Bridge to Protect a Unique Tree

This paper describes the “Variation Guggenheim 3: Mirador de la palmera” project, situated in Daya Vieja (Alicante-Spain). This structure is inspired by the Guggenheim museum of New York and is designed to protect a land-mark palm-tree from wind loads. This six – trunk palm tree was declared monument by the Valencian government in 2012. The structure that now protect it appears to fly around de palm tree creating a helicoidally skywalk made of steel, while retrofitting the lateral trunks of the tree to protect them from collapse. An 18 m. long straight beam starts on the top of this helix, and stretches towards a lookout point that offers a view of the whole village and its surroundings. The reduction of the visual impact of the structure on the tree was a major aim for the project design. The structural elements are as slender as possible to avoid the visual obstruction of tree. They are painted white, while the walkway steel corrugated plate is painted green in order to highlight its neat shape among the blur created by the apparent mess of bars of the supporting structure. The two main piles of this pedestrian bridge were designed in steel and geometrically resemble trees. A Ground Penetrating Radar analysis was performed to detect the palm root location and to decide the best foundation system. Slender cast in-situ steel-concrete micropiles along with a concrete pile-cap, raised some centimeters above the ground level, were used to reduce the damage to the roots. The projected pile-cap is a slender, continuous, circular ring; which geometry resembles a concrete bench. This structure has been a finalist in the Architecture Awards for the 2010-2014 best construction projects, held by the Diputación de Alicante.