Modelagem numérica de elementos tracionados em aço inoxidável com parafusos defasados

Atualmente, a utilização do aço inoxidável em elementos estruturais é considerada uma solução cara para os problemas da engenharia estrutural. Todavia, mudanças de atitudes dentro da construção civil, uma transição global para um desenvolvimento sustentável e redução em impactos ambientais têm seguramente provocado um aumento na utilização do aço inoxidável. As normas de projeto de aço inoxidável atuais são, em grande parte, baseadas em analogias assumidas com o comportamento de estruturas desenvolvidas com aço carbono. Todavia, o aço inoxidável apresenta quatro curvas não-lineares tensão versus deformação (tensão e compressão, paralela e perpendicular a laminação do material), sem patamar de escoamento e região de encruamento claramente definidos, modificando assim, o comportamento global das estruturas que o utilizam. Em elementos estruturais submetidos a forças axiais de tração, a ruptura da seção líquida representa um dos estados limites últimos a serem verificados. Com o objetivo de se avaliar a resistência a tração de elementos estruturais aparafusados em aço inoxidável S304, este trabalho apresenta um modelo numérico baseado no método dos elementos finitos através do programa Ansys (versão 11). A não-linearidade do material foi considerada através do critério de plastificação de Von Mises e curvas tensão versus deformação verdadeira. A não-linearidade geométrica foi introduzida no modelo através da Formulação de Lagrange atualizado. O modelo numérico foi calibrado com resultados experimentais obtidos em ensaios de laboratório, a partir de ligações aparafusadas alternadas rígidas, onde não se ocorre nenhuma rotação entre os membros, transferindo nenhum momento fletor, apenas esforço normal e cisalhante.

Modelagem numérica de ligações viga-coluna em aço sob momento fletor e força normal.

As ligações desempenham um papel fundamental no comportamento global das estruturas de aço. Inúmeros trabalhos de pesquisa têm sido desenvolvidos para entender o comportamento real de uma ligação e sua influência na resistência global dos pórticos. Atualmente, a Norma Brasileira de estruturas de aço de edificações, NBR 8800, considera o comportamento das ligações entre duas situações extremas: rígidas, onde não ocorre nenhuma rotação entre os membros conectados, transferindo momento fletor, força cortante e força normal; ou flexíveis, caracterizadas pela liberdade de rotação entre os membros conectados, impedindo a transmissão de momento fletor. Outras normas de projeto de estruturas de aço, consideram que as ligações apresentam um comportamento intermediário, ou seja, semi-rigídas, que podem estar submetidas a uma combinação de momento fletor e esforço normal. Porém, mesmo com a combinação, estas normas não consideram a presença de esforço normal (tração e/ou compressão). Uma limitação empírica de 5% da resistência plástica da viga é a única condição imposta no Eurocode 3. Para o estudo da ligação semi-rigída será utilizada a filosofia do Método das Componentes, que verifica a resistência da ligação e sua classificação quanto à rigidez rotacional, desenvolvida através de modelos mecânicos (modelos de molas). O objetivo deste trabalho é descrever alguns resultados de caracterização de ligações viga-coluna com placa de extremidade ajustada à altura da viga obtidos através de um modelo de elementos finitos. Para tal, será realizada uma análise não-linear geométrica e de material. Esta análise possibilitará avaliar os principais parâmetros que influenciam no comportamento deste componente no que diz respeito a sua avaliação em termos de distribuição de tensões e deformações no modelo de forma global.

Religion, emotions and social transformation along migratory processes. The cases of African church leaders in Spain and South Africa

221 p.

Distributions and abundances of Pacific sardine (Sardinops sagax) and other pelagic fishes in the California Current Ecosystem during spring 2006, 2008, and 2010, estimated from acoustic–trawl surveys

The abundances and distributions of coastal pelagic fish species in the California Current Ecosystem from San Diego to southern Vancouver Island, were estimated from combined acoustic and trawl surveys conducted in the spring of 2006, 2008, and 2010. Pacific sardine (Sardinops sagax), jack mackerel (Trachurus symmetricus), and Pacific mackerel (Scomber japonicus) were the dominant coastal pelagic fish species, in that order. Northern anchovy (Engraulis mordax) and Pacific herring (Clupea pallasii) were sampled only sporadically and therefore estimates for these species were unreliable. The estimates of sardine biomass compared well with those of the annual assessments and confirmed a declining trajectory of the “northern stock” since 2006. During the sampling period, the biomass of jack mackerel was stable or increasing, and that of Pacific mackerel was low and variable. The uncertainties in these estimates are mostly the result of spatial patchiness which increased from sardine to mackerels to anchovy and herring. Future surveys of coastal pelagic fish species in the California Current Ecosystem should benefit from adaptive sampling based on modeled habitat; increased echosounder and trawl sampling, particularly for the most patchy and nearshore species; and directed-trawl sampling for improved species identification and estimations of their acoustic target stren

The durability of different fish cage materials and the pros and cons of cage rotation

The procedures described are standard methods used in the European Union to quantify wood quality. Samples used here were smaller than the standards laid down in the DIN system (12 x 12 x 16 cm) as Litsea is a small tree and planks of the required size are unobtainable. The use of quality sized samples means that the results presented here can be compared with each other but unfortunately not with data in the literature. Wood is dried first at ambient temperature in the shade to reduce moisture content to an even 11-12%. Part of the sample was then oven-dried to 0% moisture content and its specific density determined by weighing a subsample of 128 cm super(3) (4 x 4 x 8 cm). Strength of expansion of the wood is determined as the percentage by which the wood sample can be pulled apart parallel and vertical to the grain before it breaks. Compression and bending strengths and elasticity are measured by compressing, bending and pulling wood sample in a machine specially designedto determine the forces required.

Stocking, Enhancement, and Mariculture of Penaeus orientalis and Other Species in Shanghai and Zhejiang Provinces, China

China's marine aquaculture landings provide only 18% of its combined freshwater and amrine capture and culture landings, at a per-capita consumption of only 3.2 kg/yr out of a total of 18.1 kg/yr. We described development and some of the results of long-term mariculture and stocking/enhancement projects that have been underway for up to 20 years in the Hangzhou Bay area. Penaeus orientalis (also referred to as P. chinensis) stocking provided up to 400 t/yr, at a total cost-benefit ratio of up to 8 Yuan of landed shrimp per Yuan invested in shrimp stocking. Over 40 t of Penaeus orientalis were produced commercially in 1993, with proceeds being used to fund mariculture and fisheries research. Large scale edible jellyfish restocking is also underway, while semicommercial culture of abalone, Haliotis diversicolor, has been successful. Technical problems limitig mariculture have been solved successfully for some species.

A Review of Interactions Between Hawaii's Fisheries and Protected Species

Several fisheries in Hawaii are known to have interactions with protected cetaceans, seabirds, marine turtles, or seals. Handline fisheries for bottomfish, tuna, and mackerel scad lose bait and catch to bottlenose dolphins, rough-toothed dolphins, and Hawaiian monk seals. Troll fisheries for billfish lose live bait to bottlenose dolphins, rough-toothed dolphins, albatrosses, and boobies; these fisheries may also lose catch to false killer whales. A longline fishery for tuna and billfish has burgeoned in Hawaii since 1987, resulting in interactions with protected species; marine turtles, seabirds, and monk seals take bait and are known to become hooked, and false killer whales may take catch. Research on deterrents or alternative fishing methods has been limited, and interactions have been reduced primarily through management and regulatory actions. These include area closures and gear requirements. An observer program has also been established for the bottomfish and longline fisheries.

Heat-stress and light-stress induce different cellular pathologies in the symbiotic dinoflagellate during coral bleaching

Coral bleaching is a significant contributor to the worldwide degradation of coral reefs and is indicative of the termination of symbiosis between the coral host and its symbiotic algae (dinoflagellate; Symbiodinium sp. complex), usually by expulsion or xenophagy (symbiophagy) of its dinoflagellates. Herein, we provide evidence that during the earliest stages of environmentally induced bleaching, heat stress and light stress generate distinctly different pathomorphological changes in the chloroplasts, while a combined heat- and light-stress exposure induces both pathomorphologies; suggesting that these stressors act on the dinoflagellate by different mechanisms. Within the first 48 hours of a heat stress (32°C) under low-light conditions, heat stress induced decomposition of thylakoid structures before observation of extensive oxidative damage; thus it is the disorganization of the thylakoids that creates the conditions allowing photo-oxidative-stress. Conversely, during the first 48 hours of a light stress (2007 µmoles m−2 s−1 PAR) at 25°C, condensation or fusion of multiple thylakoid lamellae occurred coincidently with levels of oxidative damage products, implying that photo-oxidative stress causes the structural membrane damage within the chloroplasts. Exposure to combined heat- and light-stresses induced both pathomorphologies, confirming that these stressors acted on the dinoflagellate via different mechanisms. Within 72 hours of exposure to heat and/or light stresses, homeostatic processes (e.g., heat-shock protein and anti-oxidant enzyme response) were evident in the remaining intact dinoflagellates, regardless of the initiating stressor. Understanding the sequence of events during bleaching when triggered by different environmental stressors is important for predicting both severity and consequences of coral bleaching

An analysis of the experimental pole and line fishery conducted around Sri Lanka by Nichiro Fishing Company of Japan

Under a joint agreement the Government of Sri Lanka and the Nichiro Fishing Company of Japan have undertaken an experimental pole and line fishery around Sri Lanka with a view to determining the feasibility of establishing a joint commercial venture. 3 Japanese vessels conducted trials during the period March 1973-October 1974. Details of the vessels and cruises are given. A variety of fish were tried as bait, and the selection of appropriate bait is discussed. Catches and catch and effort statistics are presented, with tables showing distribution of the tuna. The results of the trials were below expectations, and are in part attributed to bait availability, and unfavorable weather conditions. Seasonal variation of the type of fishery is suggested in order to take account of this, and it is concluded that a fishery based on 45/50 ft combined pole and line and drift net fishing vessels might prove feasible.

An experimental and numerical study of an oscillating transonic shock wave in a duct

A combined experimental and numerical study of a transonic shock wave in a parallel walled duct subject to downstream pressure perturbations has been conducted. Experiments and simulations have been carried out with a shock strength of M∞ = 1.4 for pressure perturbation frequencies in the range 16-90 Hz. The dynamics of unsteady shock motion and the interaction structure between the unsteady transonic shock wave and the turbulent tunnel floor boundary layer have been investigated. It is found that the (experimentally measured) dynamics of shock motion are generally well predicted by the computational scheme, especially at relatively low (≈ 40 Hz) frequencies. However, at higher frequencies (≈ 90 Hz), some subtle differences between the shock dynamics measured in experiments and those predicted by Computational Fluid Dynamics (CFD) exist. There is evidence from experiments that variations in shock / boundary layer interaction (SBLI) structure caused by shock motion are responsible for a change in the nature of shock dynamics between low and high frequency. In contrast, numerical results at low and high frequencies do not differ significantly and this suggests that the numerical method is not fully capturing the physics of the unsteady flow. Possible reasons for this are considered and a number of areas where CFD is unable to replicate experimental observations are identified. Significantly, CFD predicts changes in SBLI structure due to shock motion that are much too large and this may explain why none of the subtle effects on shock dynamics seen in experiments occur in CFD. Further work developing numerical methods that demonstrate a more realistic sensitivity of SBLI structure to unsteady shock motion is required. Copyright © 2010 by P.J.K. Bruce.

Merging effects of vitamin E and C on biological factors, blood characteristics and resistance against thermal stress in rainbow trout (Onchorhyncus mykiss)

This study was conducted to assay the effects of different levels of dietary vitamins C and E on growth indices and survival and resistance against thermal stress of rainbow trout (Oncorhynchus mykiss) in pond culture of Marzan abad from December 2011 to February 2011. Seven diets were supplemented. 300 fish with the average weight of 17 g were introduced to ponds for 60 days. The results showed that the highest and the lowest weight gain were in fish fed with diet containing 50 mg/kg vitamin C and E and 0 mg/kg vitamin C and E(control) , respectively. The highest and the lowest Feed Conversion Ratio (FCR) were measured in control and diet 50 mg/kg vitamin C and E. There is a significant difference in their treatments (P<0.05). Also, the lowest and highest amount of Weight Gain (WG) were observed in (E) treatment with 165.04% and 117.5% in control, the highest and lowest Specific Growth Rate (SGR), Protein Efficiency Ratio (PER), Condition Factor (CF) was found in control and treatment 50 mg/kg vitamin C and E, respectively(P<0.05). In conclusion vitamin C and E have an important role in enhancement of growth performance and feed efficiency of rainbow trout.The highest red blood cells were found in combined treatments and which the vitamin C was added.The highest RBC were found in E treatment(1.1×104 /mm3) and the lowest one in control (P˂0.05). Counting white blood cells also confirmed highest quantity in combined treatments with (69.83×104/mm3) and the lowest one (28.83×104 /mm3) in control. In conclusion these vitamins have a significant role in blood characteristics. Meantime, the resistance against termal stress was measured at the end of 60 days by facing fishes into 5 centigrade warmer water so consentration of Cortisol and Glucose measured for this reason.The lowest cortisol amount was measured in E treatment with 188.74 ng/ml and the highest was found in control(P<0.05). There was a significant difference in blood glucose consentration of fishes in F treatment with (78.66 mg/dl) and control with 136 mg/dl as a highest one(P<0.05).

Capturing views of men, women and youth on agricultural biodiversity resources consumed in Barotseland, Zambia

This paper presents data and findings from focus group discussions in study communities selected by the CGIAR Research Program on Aquatic Agricultural Systems (AAS) in the Western Province of Zambia. The discussions focused on cultivated crops and vegetables collected from open fields and consumed as food. Participatory tools for agricultural biodiversity (agrobiodiversity) assessment were used to capture community perspectives on plant species and varietal diversity; factors influencing the availability and use of plants for food; unique, common and rare crop species cultivated in a community, identified through a four-cell analysis methodology; and core problems, root causes, effects and necessary actions to tackle them, using problem tree or situation analysis methods.

Characterisation and fluidisation of synthetic pit latrine sludge

Half of the world’s urban population will live in informal settlements or “slums” by 2030. Affordable urban sanitation presents a unique set of challenges as the lack of space and resources to construct new latrines makes the de-sludging of existing pits necessary and is something that is currently done manually with significant associated health risks. Therefore various mechanised technologies have been developed to facilitate pit emptying, with the majority using a vacuum system to remove material from the top of the pit. However, this results in the gradual accumulation of unpumpable sludge in the pit, which eventually fills the latrine and forces it to be abandoned. This study has developed a method for fluidising unpumpable pit latrine sludge, based on laboratory experiments using a harmless synthetic sludge. Such a sludge consisting of clay and compost was developed to replicate the physical characteristics of pit latrine sludges characterised in Botswana during the 1980s. Undrained shear strength and density are identified as the critical parameters in controlling pumpability and a method of sludge characterisation based on these parameters is reported. In a series of fluidisation tests using a one fifth scale pit emptying device the reduction in sludge shear strength was found to be caused by i) dilution, which increases water content, and ii) remoulding, which involves mechanical agitation to break down the structure of the material. The tests demonstrated that even the strongest of sludges could be rendered “pumpable” by sufficient dilution. Additionally, air injection alone produced a three-fold decrease in strength of consolidated samples as a result of remoulding at constant water content. The implications for sludge treatment and disposal are discussed, and the classification of sludges according to the equipment required to remove them from the latrine is proposed. Possible field tests to estimate sludge density and shear strength are suggested. The feasibility of using low cost vacuum cleaners to replace expensive vane pumps is demonstrated. This offers great potential for the development of affordable pit emptying technologies that can remove significantly stronger sludges than current devices through fluidising the wastes at the bottom of the pit before emptying

Contra-rotating open rotor operation for improved aerodynamics and noise at takeoff

The contra-rotating open rotor is, once again, being considered as an alternative to the advanced turbofan to address the growing pressure to cut aviation fuel consumption and carbon dioxide emissions. One of the key challenges is meeting community noise targets at takeoff. Previous open rotor designs are subject to poor efficiency at takeoff due to the presence of large regions of separated flow on the blades as a result of the high incidence needed to achieve the required thrust. This is a consequence of the fixed rotor rotational speed constraint typical of variable pitch propellers. Within the study described in this paper, an improved operation is proposed to improve performance and reduce rotorrotor interaction noise at takeoff. Three-dimensional computational fluid dynamics (CFD) calculations have been performed on an open rotor rig at a range of takeoff operating conditions. These have been complemented by analytical tone noise predictions to quantify the noise benefits of the approach. The results presented show that for a given thrust, a combination of reduced rotor pitch and increased rotor rotational speed can be used to reduce the incidence onto the front rotor blades. This is shown to eliminate regions of flow separation, reduce the front rotor tip loss and reduce the downstream stream tube contraction. The wakes from the front rotor are also made wider with lower velocity defect, which is found to lead to reduced interaction tone noise. Unfortunately, the necessary increase in blade speed leads to higher relative Mach numbers, which can increase rotor alone noise. In summary, the combined CFD and aero-acoustic analysis in this paper shows how careful operation of an open rotor at takeoff, with moderate levels of re-pitch and speed increase, can lead to improved front rotor efficiency as well as appreciably lower overall noise across all directivities. Copyright © 2011 by ASME.