Site fidelity and movements of gilthead sea bream (Sparus aurata) in a coastal lagoon (Ria Formosa, Portugal)

Short-time site fidelity and movements of gilthead sea bream (Sparus aurata) in a coastal lagoon were determined using passive acoustic telemetry. Nine fish, ranging from 20.1 to 32.5 cm total length, were surgically implanted with acoustic transmitters and monitored for up to 179 days. Minimum convex polygon areas ranged from 18,698.6 m(2) to 352,711.9 m(2). Home range sizes were small, with individuals using core areas on a daily basis. However, these core areas shifted within the study site over time towards the opening to the sea. Two different diel behaviors were recorded, with some individuals more active at night and others during day time. Some individuals also demonstrated homing abilities, returning to the capture site after being released more than 4 km away. (C) 2008 Elsevier Ltd. All rights reserved.

Size selectivity of diamond and square mesh cod ends for four by-catch species in the crustacean fishery off the Portuguese south coast

The effects of an increase in cod end mesh size from 55 to 60 and 70 mm and a change of mesh configuration from 55 mm diamond to 55 turn square mesh on the size selectivity of four by-catch species (the red shrimp Aristeus antennatus, the European hake Merluccius merluccius, the horse mackerel Trachurus trachurus and the blue whiting Micromesistius poutassou) commonly captured in the crustacean fishery off the Portuguese south coast, were evaluated. Selectivity parameters for blue whiting, the most abundant species in the catches, were estimated taking into account between-haul variation, while for the remaining species, captured in much lower quantities, the selectivity estimates were based on pooled data by length class for all hauls within the same cod end. Length at 50% retention, L-50, was found to increase with mesh size and with the change in mesh configuration for all the studied species. For blue whiting trawling depth and cod end catch were found to play a role in between-haul variation by increasing L-50 as well. The results suggest that an increase in the current minimum mesh size of 55-70 mm would be advisable to be compatible with the minimum landing sizes (MLSs) of 29 mm carapace length and 27 cm total length for red shrimp and hake, respectively, while it would greatly reduce the amount of discards, particularly those for blue whiting, that accounted for approximately 50% of the total catch weight. Horse mackerel was the only species for which the use of a larger mesh size would result in a significant escapement of individuals above the MLS of 15 cm. (C) 2002 Elsevier Science B.V. All rights reserved.

The reproductive biology of Spondyliosoma cantharus (L.) from the SW Coast of Portugal

The study of Spondyliosoma cantharus (L.) reproduction was carried out within the framework of a project on the Fisheries resources of the south-west coast of Portugal, and was based on the analysis of the spawning season, gonad maturation, size-at-maturity, fecundity, and hermaphroditism. Spawning took place from February to April, peaking in March. Analysis of the sex ratio by size class and season showed that females were more abundant throughout the year (M/F=0.57) and in the smaller size classes. Overall size at first maturity (L-50) was 20.10 cm total length (TL), with a significant difference between males (22.41 cm, TL) and females (19.98 cm, TL). Absolute fecundity (Fa) ranged from 37,506 to 112,074 oocytes, with a mean of 61,396. A power type relationship best described the relationships between absolute fecundity and TL (Fa = 436.27TL(1.575)), and somatic weight (Fa = 2979.7SW(0.585)). The number of oocytes/g of female somatic weight ranged from 217 to 549, with a mean of 346. The reproductive strategy of this species is characterised by protogynic hermaphroditism, as indicated by the presence of individuals in transition and of testes with vestiges of preceding ovaries associated with the significant differences in the size frequency distributions of the sexes.

The reproductive biology of the two-banded sea bream (Diplodus vulgaris) from the southwest coast of Portugal

The study of the reproduction of Diplodus vulgaris (Geoff.) as part of a base-line study of the fishery resources of the southwest coast of Portugal, was based on the analysis of the spawning season, gonad maturation, size at maturity, fecundity and hermaphroditism. The spawning season is relatively long, from December to March, with peaks in January and February. No significant differences were found either in the sex ratio (M:F = 1.01) over the year or by size. The size at first maturity (L-50) for all sexes and undetermined individuals combined was 18.33 cm total length (TL), with no significant differences between males and females. The estimated L-50 is considerably greater than the minimum legal size in Portugal of 15.0 cm. Mean absolute fecundity (F-a) was 131 127 oocytes, ranging from 31 523 to 250 608. The relationship between absolute fecundity and total length (TL) (F-a = 25 398 TL-484 426) and somatic weight (SW) (F-a = 878.8SW-71 416) was of the linear type. The mean number of oocytes per gram of somatic weight was 526, ranging from 194 to 887. The reproductive strategy of this species is characterized by a rudimentary hermaphroditism with possible protandry, as evidenced by the existence of individuals in sexual transition.

Age and growth of the bigeye thresher shark, Alopias superciliosus, from the pelagic longline fisheries in the tropical northeastern Atlantic Ocean, determined by vertebral band counts

The bigeye thresher, Alopias supercilious, is commonly caught as bycatch in pelagic longline fisheries targeting swordfish. Little information is yet available on the biology of this species, however. As part of an ongoing study, observers sent aboard fishing vessels have been collecting set of information that includes samples of vertebrae, with the aim of investigating age and growth of A. supercilious. A total of 117 specimens were sampled between September 2008 and October 2009 in the tropical northeastern Atlantic, with specimens ranging from 101 to 242 cm fork length (FL) (176 to 407 cm total length). The A. supercilious vertebrae were generally difficult to read, mainly because they were poorly calcified, which is typical of Lamniformes sharks. Preliminary trials were carried out to determine the most efficient band enhancement technique for this species, in which crystal violet section staining was found to be the best methodology. Estimated ages in this sample ranged from 2 to 22 years for females and 1 to 17 years for males. A version of the von Bertalanffy growth model (VBGF) re-parameterised to estimate L(0), and a modified VBGF using a fixed L(0) were fitted to the data. The Akaike information criterion (AIC) was used to compare these models. The VBGF produced the best results, with the following parameters: L(inf) = 293 cm FL, k = 0.06 y(-1) and L(0) = 111 cm FL for females; L(inf) = 206 cm FL, k = 0.18 y(-1) and L(0) = 93 cm FL for males. The estimated growth coefficients confirm that A. supercilious is a slow-growing species, highlighting its vulnerability to fishing pressure. It is therefore urgent to carry out more biological research to inform fishery managers more adequately and address conservation issues.

Age and growth of bluemouth, Helicolenus dactylopterus (Delaroche, 1809) from the Azores

The age and growth of the Helicolenus dactylopterus (Delaroche, 1809) in the Azorean waters were studied using whole and sliced otolith readings. Individuals were collected during demersal surveys carried out around the Azores islands and its most important fishing banks and also from commercial landings. A total of 1024 individuals were measured, weighed and their sex was determined. Individuals ranged from 3 to 49 cm total length (TL) and their estimated ages between 0 and 32 years old. The otoliths showed the typical teleost fish pattern with alternated opaque and hyaline rings. Significant differences between sliced and whole otolith readings were found, especially after 7 years old (>25 cm TL). Sliced otoliths were found easier to read, regardless of TL or age. Comparisons with other studies for the Azores region and other areas are discussed.

Reproductive aspects of the oceanic whitetip shark, Carcharhinus longimanus (Elasmobranchii: Carcharhinidae), in the equatorial and southwestern Atlantic Ocean

The present study sought to study the reproductive biology of the oceanic whitetip shark, Carcharhinus longimanus, in the equatorial and southwestern Atlantic Ocean. A total of 234 specimens were collected as bycatch during pelagic longline fisheries targeting tunas and swordfish, between December 2003 and December 2010. The fishing area was located between latitudes 10N and 35S and longitudes 3E and 40W. Of the 234 individuals sampled, 118 were females (with sizes ranging from 81 to 227 cm TL, total length) and 116 males (ranging from 80 to 242 cm TL). The reproductive stages of the females were classed as immature, mature, preovulatory and pregnant, while males were divided into immature, maturing and mature. The size at maturity for females was estimated at 170.0 cm TL, while that for males was between 170.0 and 190.0 cm TL. Ovarian fecundity ranged from 1 to 10 follicles and uterine fecundity from 1 to 10 embryos. The reproductive cycle of this species is most likely biennial, with parturition occurring once every two years.

Effect of light-sticks and electralume attractors on surface-longline catches of swordfish (Xiphias gladius, Linnaeus, 1959) in the southwest equatorial Atlantic

Two experimental fishing trials were carried out off the coast of Pernambuco, Brazil, in 1999 and 2001, using a small artisanal longliner. In experiment 1, six-hook baskets with three chemical light-sticks on alternating hooks had significantly higher catch rates than those with zero or with a light-stick on every hook, with most swordfish accounted for by hooks with light-sticks. Analysis of the data from experiment 2 showed no significant difference between electralume attractors, consisting of AA lithium batteries protected by a solid cover and light-sticks that produce a fluorescent light when two chemical products are mixed. Significant differences were detected in mean CPUE by size class, with most swordfish belonging to class ‘b’ (125–170 cm lower jaw to fork length (LJFL)). No differences, however, were found for swordfish catches in classes ‘a’ (<125 cm LJFL) and ‘b’, and no evidence was found of interaction between the two factors (attractor and size class). Although there was no significant difference between the total length-frequency distributions of swordfish caught with light-sticks and electralume attractors, significant differences were found for fish smaller than 125 cm LJFL, with electralume catches consisting of smaller swordfish than those of gear using light-sticks.

Morbid obesity in total hip arthroplasty: Redefining outcomes for operative time, length of stay, and readmission

Background The incidence of obesity amongst patients presenting for elective Total Hip Arthroplasty (THA) has increased in the last decade and the relationship between obesity and the need for joint replacement has been demonstrated. This study evaluates the effects of morbid obesity on outcomes following primary THA by comparing short-term outcomes in THA between a morbidly obese (BMI ≥40) and a normal weight (BMI 18.5 - <25) cohort at our institution between January 2003 and December 2010. Methods Thirty-nine patients included in the morbidly obese group were compared with 186 in the normal weight group. Operative time, length of stay, complications, readmission and length of readmission were compared. Results Operative time was increased in the morbidly obese group at 122 minutes compared with 100 minutes (p=0.002). Post-operatively there was an increased 30-day readmission rate related to surgery of 12.8% associated with BMI ≥40 compared with 2.7% (p= 0.005) as well as a 5.1 fold increase in surgery related readmitted bed days - 0.32 bed days per patient for normal weight compared with 1.64 per patient for the morbidly obese (p=0.026). Conclusion Morbidly obese patients present a technical challenge and likely this and the resultant complications are underestimated. More work needs to be performed in order to enable suitable allocation of resources.

Preoperative pain level and patient expectation predict hospital length of stay after total hip arthroplasty.

The purpose of this study was to identify preoperative predictors of length of stay after primary total hip arthroplasty in a patient population reflecting current trends toward shorter hospitalization and using readily obtainable factors that do not require scoring systems. A retrospective review of 112 consecutive patients was performed. High preoperative pain level and patient expectation of discharge to extended care facilities (ECFs) were the only significant multivariable predictors of hospitalization extending beyond 2 days (P=0.001 and P<0.001 respectively). Patient expectation remained significant after adjusting for Medicare's 3-day requirement for discharge to ECFs (P<0.001). The study was adequately powered to analyze the variables in the multivariable logistic regression model, which had a concordance index of 0.857.

Preoperative predictors of extended hospital length of stay following total knee arthroplasty.

The purpose of this study was to identify the preoperative predictors of hospital length of stay after primary total knee arthroplasty in a patient population reflecting current trends toward shorter hospitalization and using readily obtainable factors that do not require scoring systems. A single-center, multi-surgeon retrospective chart review of two hundred and sixty consecutive patients who underwent primary total knee arthroplasty was performed. The mean length of stay was 3.0 days. Among the different variables studied, increasing comorbidities, lack of adequate assistance at home, and bilateral surgery were the only multivariable significant predictors of longer length of stay. The study was adequately powered for statistical analyses and the concordance index of the multivariable logistic regression model was 0.815.

Surface plasmon polariton propagation length: A direct comparison using photon scanning tunneling microscopy and attenuated total reflection

The propagation of surface plasmon polaritons (SPP's) is studied using a photon scanning tunneling microscope (PSTM) and conventional attenuated total reflection (ATR). The PSTM experiment uses localized (focused beam) launching or SPP's at a wavelength of 632.8 nm. Propagation of the SPP is observed as an exponentially decaying tail beyond the launch site acid the 1/e propagation length is measured directly for a series of Ag films of different thicknesses. The ATR measurements are used to characterize the thin film optical and thickness parameters, revealing, notably, the presence of a contaminating adlayer of Ag2S of typical dielectric function, 8.7 + i2.7, and thickness 1-2 nm. Values of the SPP propagation length, based on the ATR- derived film parameters used in the four-media implicit SPP dispersion relation, show very good agreement with those based on the PSTM images for the case of undercoupled or optimally coupled SPP modes. The observed propagation lengths are quantitatively analyzed taking explicit account of additional intrinsic damping due to the growth of the Ag2S layer and of reradiation of the SPP back into the prism outside the launch site. Finally, the PSTM images show excellent SPP beam confinement in the original propagation direction.

Analysis of hybrid layer thickness, resin tag length and their correlation with microtensile bond strength using a total etch adhesive to intact dentin.

The objective of this study was to evaluate the use of a two-step total etch and rinse adhesive, the correlation between the hyybrid layer thickness (HL) and bond strength (BS), and between resin tag length (RT) and bond strength in the same teeth, and also to evaluate the fracture patterns of the tested specimens. Ten human molars were used for the restorative procedure and then sectioned in two halves (mesio-distally). The materials used were Adper Single Bond 2, 3M ESPE, Ultra etch gel, Ultradent and Filtek Z250, 3M ESPE. One half were utilized to measure the HL thickness and RT length through light microscopy analysis (400x), and the other half was subject to a microtensile test to measure the BS. The fractured surfaces were analyzed by scanning electron microscopy and fracture patterns classified. The Pearson correlation test was applied (p = 0.05). The results of the analyses of each specimen then were correlated: mean HL thickness = 4.39 (0.48) microm, mean length of RT = 9.94 (1.69) microm, mean BS = 23.98 (10.24) MPa. A statistically significant correlation between HL thickness and bond strength was found (r = 0.93). The two step etch and rinse adhesive system, showed a strong correlation between HL thickness and bond strength. The most common fractures were adhesive, followed by cohesive in resin.

Gunshot energy transfer profile in ballistic gelatine, determined with computed tomography using the total crack length method

By measuring the total crack lengths (TCL) along a gunshot wound channel simulated in ordnance gelatine, one can calculate the energy transferred by a projectile to the surrounding tissue along its course. Visual quantitative TCL analysis of cut slices in ordnance gelatine blocks is unreliable due to the poor visibility of cracks and the likely introduction of secondary cracks resulting from slicing. Furthermore, gelatine TCL patterns are difficult to preserve because of the deterioration of the internal structures of gelatine with age and the tendency of gelatine to decompose. By contrast, using computed tomography (CT) software for TCL analysis in gelatine, cracks on 1-cm thick slices can be easily detected, measured and preserved. In this, experiment CT TCL analyses were applied to gunshots fired into gelatine blocks by three different ammunition types (9-mm Luger full metal jacket, .44 Remington Magnum semi-jacketed hollow point and 7.62 × 51 RWS Cone-Point). The resulting TCL curves reflected the three projectiles' capacity to transfer energy to the surrounding tissue very accurately and showed clearly the typical energy transfer differences. We believe that CT is a useful tool in evaluating gunshot wound profiles using the TCL method and is indeed superior to conventional methods applying physical slicing of the gelatine.

Total hip arthroplasty: leg length inequality impairs functional outcomes and patient satisfaction

Background Leg length inequality (LLI) was identified as a problem of total hip arthroplasty soon after its introduction. Leg lengthening is the most common form of LLI. Possible consequences are limping, neuronal dysfunction and aseptic component loosening. LLI can result in an increased strain both on the contralateral hip joint and on the abductor muscles. We assessed the influence of leg lengthening and shortening on walking capacity, hip pain, limping and patient satisfaction at 2-year follow-up. Methods 478 cases with postoperative lengthening and 275 with shortening were identified, and matched with three controls each. Rigorous adjustment for potential differences in baseline patient characteristics was performed by propensity-score matching of covariates. The arbitrarily defined desired outcomes were a walking capacity >60 minutes, no hip pain, no limping, and excellent patient satisfaction. Differences in not achieving the desired outcomes between the groups were expressed as odds ratios. Results In the lengthened case group, the odds ratio for not being able to walk for an hour was 1.70 (95% CI 1.28-2.26) for cases compared to controls, and the odds ratio for having hip pain at follow-up was 1.13 (95% CI 0.78-1.64). The odds ratio for limping was 2.08 (95% CI 1.55-2.80). The odds ratio for not achieving excellent patient satisfaction was 1.67 (95% CI 1.23-2.28). In the shortening case group, the odds ratio for not being able to walk for an hour was 1.23 (95% CI 0.84-1.81), and the odds ratio for having hip pain at follow-up was 1.60 (95% CI 1.05-2.44). The odds ratio for limping for cases was 2.61 (95% CI 1.78-3.21). The odds ratio for not achieving excellent patient satisfaction was 2.15 (95% CI 1.44-3.21). Conclusions Walking capacity, limping and patient satisfaction were all significantly associated with leg lengthening, whereas pain alleviation was not. In contrast, hip pain, limping and patient satisfaction were all significantly associated with leg shortening, whereas walking capacity was not.