The experimental evaluation of the dynamics of fluid-loaded microplates

An experimental testing system for the study of the dynamic behavior of fluid-loaded rectangular micromachined silicon plates is designed and presented in this paper. In this experimental system, the base-excitation technique combined with pseudo-random signal and cross-correlation analysis is applied to test fluid-loaded microstructures. Theoretical model is also derived to reveal the mechanism of such an experimental system in the application of testing fluid-loaded microstructures. The dynamic experiments cover a series of testings of various microplates with different boundary conditions and dimensions, both in air and immersed in water. This paper is the first that demonstrates the ability and performances of base excitation in the application of dynamic testing of microstructures that involves a natural fluid environment. Traditional modal analysis approaches are used to evaluate natural frequencies, modal damping and mode shapes from the experimental data. The obtained experimental results are discussed and compared with theoretical predictions. This research experimentally determines the dynamic characteristics of the fluid-loaded silicon microplates, which can contribute to the design of plate-based microsystems. The experimental system and testing approaches presented in this paper can be widely applied to the investigation of the dynamics of microstructures and nanostructures.

On the use of the type I and II scheme for classifying ultrafast laser direct-write photonics

The use of the Type I and Type II scheme, first introduced and used by fiber Bragg grating researchers, has recently been adopted by the ultrafast laser direct-write photonics community to classify the physical geometry of waveguides written into glasses and crystals. This has created confusion between the fiber Bragg grating and direct-write photonics community. Here we propose a return to the original basis of the classification based on the characteristics of the material modification rather than the physical geometry of the waveguide.

Aid allocation of the emerging Central and Eastern European donors

This paper examines the main characteristics of the (re-)emerging foreign aid policies of the Visegrád countries (the Czech Republic, Hungary, Poland, Slovakia), concentrating on the allocation of their aid resources. I adopt an econometric approach, similar to the ones used in the literature, for analysing the aid allocation of the OECD DAC donors. Using this approach, I examine the various factors that influence aid allocation of the Visegrád countries, using data for the years between 2001 and 2008. The most important conclusion is that the amount of aid a partner country gets from the four emerging donors is not influenced by the level of poverty or the previous performance of the recipients (measured by the level of economic growth or the quality of institutions). The main determining factor seems to be geographic proximity, as countries in the Western Balkans and the Post-Soviet region receive much more aid from the Visegrád countries than other recipients. Historical ties (pre-1989 development relations) and international obligations in the cases of Afghanistan and Iraq are also found to be significant explanatory factors. This allocation is in line with the foreign political and economic interests of these new donors. Although there are clear similarities between the four donors, this paper also identifies some individual country characteristics.

Sensing characteristics of a novel two-section long-period grating

The behavior of a temperature self-compensating, fiber, long-period grating (LPG) device is studied. This device consists of a single 325-µm-period LPG recorded across two sections of a single-mode B-Ge-codoped fiber—one section bare and the other coated with a 1-µm thickness of Ag. This structure generates two attenuation bands associated with the eighth and ninth cladding modes, which are spectrally close together (~60 nm). The attenuation band associated with the Ag-coated section is unaffected by changes in the refractive index of the surrounding medium and can be used to compensate for the temperature of the bare-fiber section. The sensor has a resolution of ±1.0 × 10-3 for the refractive index and ±0.3 °C for the temperature. The effect of bending on the spectral characteristics of the two attenuation bands was found to be nonlinear, with the Ag-coated LPG having the greater sensitivity.

Some Inequalities of the Uniform Ergodicity and Strong Stability of Homogeneous Markov Chains

2000 Mathematics Subject Classification: 60J45, 60K25

Study of the Self-Assessment as а Component of the Model of Self-Regulated Learning for Engineering Students

Report published in the Proceedings of the National Conference on "Education and Research in the Information Society", Plovdiv, May, 2015

Smartphone-based digital government model:the case of the beyaz masa (white table) app in Turkey

M-Government services are now at the forefront of both user expectations and technology capabilities. Within the current setting, there is growing evidence that interoperability is becoming a key issue towards service sustainability. Thus, the objective of this chapter is to highlight the case of "Beyas Masa" - a Turkish application for infrastructure repair services. This application requires different stakeholders from different cultural background and geographically dispersed regions to work together. The major aim of this chapter to showcase experiences in as far as implementation and adoption of m-Government is concerned in the case of Turkey. The study utilizes the co-creation literature to investigate the factors influencing successful implementation of the Beyas Masa. This study reveals that initiatives are fragmented due to differences in the characteristics of the targeted audience, the marketing strategy, technology supply, distribution, and media utilized to promote its awareness. The chapter posits that in order to have affluent m-Government implementation in Turkey, it is important that many of the standalone applications are integrated to encourage interoperability and that socio-cultural behaviours should be re-shaped to encourage active engagement and interactive government service provisions that unlock the power of ICT.

Experimental investigation of the fuel properties of glidfuel, palm oil mill effluent biodiesel and blends

Biofuels derived from industry waste have potential to substitute fossil fuels (Diesel and Gasoline) in internal combustion (IC) engines. Use of waste streams as fuels would help to reduce considerably life-cycle greenhouse gas emissions and minimise waste processing costs. In this study an investigation into the fuel properties of two waste derived biofuels were carried out, they are: (i) Glidfuel (GF) biofuel - a waste stream from paper industry, and (ii) Palm Oil Mill Effluent (POME) biodiesel - biodiesel produced from palm oil industry effluent through various treatment and transesterification process. GF and POME was mixed together at various proportions and separately with fossil diesel (FD) to assess the miscibility and various physical and chemical properties of the blends. Fuel properties such as kinematic viscosity, higher heating value, water content, acid number, density, flash point temperature, CHNO content, sulphur content, ash content, oxidation stability, cetane number and copper corrosion ratings of all the fuels were measured. The properties of GF, POME and various blends were compared with the corresponding properties of the standard FD. Significance of the fuel properties and their expected effects on combustion and exhaust emission characteristics of the IC engine were discussed. Results showed that most properties of both GF and POME biodiesel were comparable to FD. Both GF and POME were miscible with each other, and also separately with the FD. Flash point temperatures of GF and POME biodiesel were 40.7°C and 158.7°C respectively. The flash point temperature of GF was about 36% lower than corresponding FD. The water content in GF and FD were 0.74 (% wt) and 0.01 (% wt) respectively. Acidity values and corrosion ratings of both GF and POME biodiesel were low compared to corresponding value for FD. The study concluded that optimum GF-POME biofuel blends can substitute fossil diesel use in IC engines.

Aid Allocation of the Emerging Central and Eastern European Donors

The paper examines the main characteristics of the (re)emerging foreign aid policies of the Visegrád countries (the Czech Republic, Hungary, Poland, Slovakia), concentrating on the allocation of their aid resources. We adopt an econometric approach, similar to the ones used in the literature for analyzing the aid allocation of the OECD DAC donors. Using this approach, we examine the various factors that influence aid allocation of the Visegrád countries, using data for the years between 2001 and 2008. Our most important conclusion is that the amount of aid a partner county gets from the four emerging donors is not influenced by the level of poverty or the previous performance (measured by the level of economic growth or the quality of institutions) of the recipients. The main determining factor seems to be geographic proximity, as countries in the Western-Balkans and the Post-Soviet region receive much more aid from the Visegrád countries than other recipients. Historical ties (pre-1989 development relations) and international obligations in the case of Afghanistan and Iraq are also found to be significant explanatory factors. This allocation is in line with the foreign political and economic interests of these new donors. While there are clear similarities between the four donors, the paper also identifies some individual country characteristics.

Aid Allocation of the Emerging Central and Eastern European Donors

The paper examines the main characteristics of the (re)emerging foreign aid policies of the Visegrád countries (the Czech Republic, Hungary, Poland, Slovakia), concentrating on the allocation of their aid resources. We adopt an econometric approach, similar to the ones used in the literature for analyzing the aid allocation of the OECD DAC donors. Using this approach, we examine the various factors that influence aid allocation of the Visegrád countries, using data for the years between 2001 and 2008. Our most important conclusion is that the amount of aid a partner county gets from the four emerging donors is not influenced by the level of poverty or the previous performance (measured by the level of economic growth or the quality of institutions) of the recipients. The main determining factor seems to be geographic proximity, as countries in the Western-Balkans and the Post-Soviet region receive much more aid from the Visegrád countries than other recipients. Historical ties (pre-1989 development relations) and international obligations in the case of Afghanistan and Iraq are also found to be significant explanatory factors. This allocation is in line with the foreign political and economic interests of these new donors. While there are clear similarities between the four donors, the paper also identifies some individual country characteristics.

Az exportteljesítmények és a hátterükben álló vállalati jellemzők elemzése (Export performance clusters of the Hungarian enterprises)

A tanulmány célja a Magyarországon működő exportáló vállalatok jellemzőinek feltárása volt a 2009-es vállalati versenyképességi felmérés alapján. Több tanulmány vizsgálta a vállalatok exportteljesítményét vállalati méret és tulajdonosi szerkezet szerinti bontásban, az elemzésben a szerző viszont ettől eltérő szemléletmódot alkalmazott. A vállalatok exportteljesítménye áll (exportértékesítés volumene, aránya, exportárbevétel változása, jövedelmezőség), a vállalati csoportképzés, klaszterelemzés középpontjában. Három jól elkülöníthető klasztert sikerült azonosítani: a jelentős exporthányaddal és folyamatos növekedéssel jellemezhető sikeres exportáló vállalatok csoportját, a stagnálással, s gyakran csökkenő exportértékesítéssel jellemezhető vállalatcsoportot, s végül a harmadik klasztert azok a jelenleg még alacsony export-ár bevétellel és alacsony exportaránnyal jellemezhető vállalatok képezték, melyekre a növekedés és a kiugróan magas jövedelmezőség volt a jellemző. Az elemzés egyediségét az adja, hogy a vállalati versenyképességi felmérés adatbázisa lehetővé tette a különböző exportteljesítmények hátterében álló működési jellemzők vizsgálatát, amelynek eredményeit a cikk bemutatja. Fő következtetésként megállapítható, hogy a sikeres exportáló vállalatok csoportja mindegyik jellemző szerint jobb működési jellemzőkkel rendelkezik a másik két csoporthoz viszonyítva. / === / The purpose of the paper is to reveal the main characteristics of the Hungarian export oriented firms. It is based on the Hungarian Competitiveness Research Survey 2009. 85% of enterprises were small or medium size in the sample. The aim of the analysis was to identify main factors and tendencies of the overall export performance. Several papers discussed the export activities of firms according to their size and ownership structure in Hungary. A different method was used here. The overall export performance (measured by volume, change, and share of export revenues, and firm profitability ratios) was put in the centre of cluster analysis. Three different clusters were identified. Firms in the firstcluster had significant export performance and growth rate. The second cluster was the group of stagnating firms and the third one contained those whose export performance was low but signaled growth with excellent profitability ratios. The uniqueness of the paper derived from the Competitiveness Research Survey because it provided an opportunity to analyse the connection between export performance and other management and operational characteristics of enterprises. The paper may induce futher research in exploring main enterprise level factors of export performance of the Hungarian firms.

Hálózat – A globális gazdaság kvázi szervezete (The business network – the quasi organization of the global economy)

A tanulmány célja, hogy értelmezze a globális gazdaság alapvető fontosságú építőelemét, az üzleti hálózatot, majd megvizsgálja annak felépítését és működésének főbb vezérlőelveit. Először az alapfogalmak – üzleti hálózat, ellátási lánc és ellátási háló – meghatározására és azok felépítésének bemutatására kerül sor. Ezt követően a cikk röviden ismerteti, hogy melyek voltak azok a vállalati gazdálkodás környezetében végbement változások, melyek a gazdaság hálózatosodását elősegítették és ennek kapcsán elvezettek az üzleti hálózatok versenyképességben játszott szerepének erősödéséhez. A szerző ugyanakkor bemutatja a kialakuló új gazdasági modell, az ún. hálózati gazdaság működési modelljének lényeges új tulajdonságait. A tanulmány ezután ismerteti az üzleti hálózat – s ezen belül az ellátási lánc – működtetésében meghatározó koordinációs mechanizmusokban megfigyelhető markáns változásokat. Végül részletesen ismerteti az üzleti hálózat két fő építőelemét: a hálózatot alkotó üzleti egységeknek, illetve a közöttük kialakuló kapcsolatoknak az alapvető típusait. ________ The aim of the paper is to present and interpret the basic building element of global business: the business network, its structure and operation. First basic terms – network, supply chain, supply network – are defined and described, than those changes are introduced that played significant role in increasing their importance. Characteristics of the new network economy are presented; especially changes in the coordination mechanism between cooperating parties in the network are demonstrated. Finally the two building blocks of global business networks: (i) nodes (business units) and (ii) threads (partnerships) are described in details.

Úton a megoldásalapú gondolkodás felé – szolgálatosodási jellemzők magyarországi termelővállalatoknál (Towards solution-based thinking: characteristics of servitization at Hungarian manufacturing companies)

A cikk fő célja a magyarországi termelővállalatok szolgálatosodási folyamatának jellemzése a versenyképesség- kutatás adatainak felhasználásával. Relevanciáját az adja, hogy a nemzetközi szakirodalom a jelenséget inkább a fejlett országokban vizsgálja. A szerzők kutatásukban körüljárták, hogy a szolgálatosodás nemzetközi szakirodalom által elfogadott jellemzői mennyiben tekinthetők érvényesnek a magyarországi viszonyok közepette. A szolgálatosodást három szinten vizsgálták: stratégia, működés és pénzügyi eredményesség. Vizsgálatuk eredményei azt mutatják, hogy a nemzetközi szakirodalommal összhangban a szolgáltatások stratégiai szerepe még alacsony a magyarországi termelővállalatoknál a termelési stratégia többi versenycéljához képest. Ugyanakkor mintájukban már megtalálhatók azok a vállalatok, amelyek mind stratégiai, mind működési szinten jelentősebb hangsúlyt fektetnek a szolgáltatások nyújtására. Fontos eredmény ugyanakkor, hogy a szolgálatosodástól elvárt pénzügyi előnyök még ezeknél a vállalatoknál sem realizálódnak. _______ The main purpose of the authors is to describe the servitization process of Hungarian manufacturing companies based on data of the Competitiveness research. The relevance of this article is given by the fact that international literature analyzes this phenomenon mainly in developed countries. In the present paper they analyze to what extent characteristics of the servitization process, generally accepted in the literature, are also applicable in a developing macroenvironment, i.e. Hungary. They approach servitization from three different perspectives: strategy, operations and financial payoffs. Results of their analysis show that, in concordance with the literature, the strategic role of services at the Hungarian manufacturing companies is still lower than other manufacturing competitive priorities. However, their sample contains a number manufacturing companies that place a greater emphasis on offering services both on strategic and operational level. An important conclusion of their study is that in case of these companies financial benefits attributable to higher levels of servitization do not yet seem to materialize.

A gazdasági válság hatása a vállalati stratégiákra – Magyar és szlovák tapasztalatok (Influence of the economic crisis on corporate strategy – Experiences in Hungary and Slovakia)

A tanulmány a jelenlegi gazdasági válság jellemzőit a vállalatok szintjén elemzi, továbbá vizsgálja annak következményeit a válság utáni lehetséges növekedésre. A tanulmány támaszkodik a nemzetközi szakirodalomban tárgyalt tapasztalatokra a válságokból való kilábalás példái alapján, amelyek a korábbi – 1980 és 2002 közötti – válságok során jelentkeztek. Magyarországi és szlovákiai empirikus vizsgálati tapasztalatok ismertetésére kerül sor arra vonatkozóan, hogy miként reagáltak a vállalatok a jelenlegi gazdasági recesszióra. A tanulmány elemzi a magyar és a szlovák vállalatok által a válság alatt követett stratégiák hatását a kereslet megélénkülése esetén adódó növekedési lehetőségek kihasználása szempontjából. A tanulmány illusztrációként bemutatja egy innovatív szlovákiai internetszolgáltató vállalat példáját. _______ The paper analyses the characteristics of the economic crisis at the level of companies, and the consequences for possibilities of growth after the crisis. The authors build on the experiences discussed in international literature concerning recovery after the previous crises between 1980 and 2002. The paper summarizes the empirical research findings on enterprise level reactions to the present economic recession. The focus of analysis is connected to the question of inluence of strategies on capabilities for realizing the growth options after the crisis. The paper – as an illustrative example – describes the strategic behaviour of an innovativ internet service company in Slovakia.

Stability of Ampelometric Characteristics of Vitis vinifera L. cv. 'Syrah' and 'Sauvignon blanc' Leaves: Impact of Within-vineyard Variability and Pruning Method/Bud Load

Historically, grapevine (Vitis vinifera L.) leaf characterisation has been a driving force in the identification of cultivars. In this study, ampelometric (foliometric) analysis was done on leaf samples collected from hand-pruned, mechanically pruned and minimally pruned ‘Sauvignon blanc’ and ‘Syrah’ vines to estimate the impact of within-vineyard variability and a change in bud load on the stability of leaf properties. The results showed that within-vineyard variability of ampelometric characteristics was high within a cultivar, irrespective of bud load. In terms of the O.I.V. coding system, zero to four class differences were observed between minimum and maximum values of each characteristic. The value of variability of each characteristic was different between the three levels of bud load and the two cultivars. With respect to bud load, the number of shoots per vine had a significant effect on the characteristics of the leaf laminae. Single leaf area and lengths of veins changed significantly for both cultivars, irrespective of treatment, while angle between veins proved to be a stable characteristic. A large number of biometric data can be recorded on a single leaf; the data measured on several leaves, however, are not necessarily unique for a specific cultivar. The leaf characteristics analysed in this study can be divided into two groups according to the response to a change in bud load, i.e. stable (angles between the veins, depths of sinuses) and variable (length of the veins, length of the petiole, single leaf area). The variable characteristics are not recommended to be used in cultivar identification, unless the pruning method/bud load is known.