Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Contributo para a avaliação do desempenho ambiental de telha cerâmica através da aplicação da pegada ambiental do produto

O presente projeto tem como objetivo principal a aplicação da metodologia da pegada ambiental do produto (PAP) no sector da indústria cerâmica, nomeadamente, para o caso de estudo da telha, permitindo a aferição e comunicação do desempenho ambiental ao longo do ciclo de vida da telha Advance Lusa na tonalidade vermelho natural. Com este intuito procedeu-se à avaliação do ciclo de vida (ACV) dos impactos ambientais gerados pela sua produção, desde a extração de matérias-primas até à fase de distribuição, ou seja, com base numa análise ‘cradle-to-gate’. A implementação da metodologia requer o cálculo dos potenciais impactos ambientais tendo em conta as etapas relevantes no contexto dos limites definidos para o sistema em estudo. O método de avaliação de impactos utilizado é o método ILCD Midpoint + através da utilização do software SimaPro e com recurso às respetivas bibliotecas de bases de dados. A avaliação do perfil de utilização dos recursos e emissões possibilita assim aferir o desempenho ambiental da telha em estudo através da identificação de pontos críticos do sistema considerado. Os resultados indicam que os impactos ambientais se devem, principalmente, à utilização de gás natural na etapa de cozedura e, que a fase de produção e/ou fabrico de telha é a que salienta maiores preocupações do ponto vista ambiental, pelo que deverão ser definidas estratégias com o propósito de verificar a aplicabilidade das melhores técnicas disponíveis (MTDs) e de técnicas emergentes, contribuindo assim, para a procura da sustentabilidade dos processos integrantes do presente estudo.

O papel dos Museus nos constructos da experiência global do destino. O caso do Museu da Cerâmica de Caldas da Rainha.

Enquanto actores, desejavelmente interventivos nos Sistemas Turísticos, os Museus, enfrentam desafios de integração dos seus visitantes no Destino em que se inserem. No âmbito desta complexidade e outros contextos aqui não referidos, estes processos de integração do visitante poderão também oscilar entre a integração na temática específica que sustentam, a integração na cultura mais alargada que personificam ou num âmbito ainda mais vasto, poderão contribuir para a integração numa Experiência Global desse mesmo destino. O Museu da Cerâmica investigado, sustenta e incrementa um Imaginário Colectivo assente numa nostalgia cultural que reafirma a cerâmica local como principal veículo da promoção cultural e patrimonial do destino Caldas da Rainha. O presente trabalho perspectiva a possibilidade do Imaginário, em determinados contextos, poder ser equacionado como uma espécie de preconceito cultural que inibe, ou, no mínimo, não contribui para promover experiências culturais mais vastas. No sentido inverso, ganham importância acrescida estratégias a seguir pelos Museus para que as suas funções pedagógicas e emancipadoras sejam mais amplas e interventivas em função de interesses existentes e previamente assumidos pelo Destino.

Memorias de las luchas por la recuperación de la tierra. La configuración de la identidad política y organizativa del resguardo indígena de Cañamomo Lomaprieta-Caldas-Colombia

Las luchas por el territorio desde los inicios del siglo XX, han sido un factor fundamental para la pervivencia del pueblo indígena perteneciente al Resguardo indígena de Cañamomo Lomaprieta, ubicado en los municipios de Riosucio y Supía ? departamento de Caldas-Colombia. Acontecidas en diferentes momentos de los siglos XX y XXI, estas luchas han entramado el tejido comunitario y organizativo, constituyendo uno de los hilos de la identidad indígena. Las memorias de estas luchas, presentes en la historia oral trasmitida generacionalmente, se constituyen en los puentes que permiten comprender la violencia política actual desde la violencia política de momentos anteriores. De esta manera, las narraciones de las luchas territoriales, van evidenciando la existencia de memorias largas que configuran sentidos, dimensiones y explicaciones frente al actual conflicto político y armado presente en los territorios rurales de Colombia

Al rescate de la niñez indígena. Refl exiones antropológicas a partir de una campaña de UNICEF Argentina

En este trabajo abordaremos, desde una perspectiva antropológica, la “campaña por los derechos de la niñez y la adolescencia indígena” lanzada por UNICEF Argentina en 2009, con el fin de problematizar las construcciones de niñez, de la cuestión indígena y de la noción de “derechos” que allí se ponen en juego. Distanciándonos de concepciones ontológicas sobre los derechos humanos, analizaremos esta campaña en tanto dispositivo cuyo efecto es la construcción de los niños indígenas como sujetos de derechos de maneras específi cas. Para ello, indagamos en el modo en que fue ésta elaborada, así como en sus contenidos, procurando explicar qué derechos y qué representaciones de los niños indígenas se visibilizaron a través de ella y las tensiones suscitadas en su proceso de armado y presentación.

La cerámica del yacimiento arqueológico de Castillejo del Bonete (Terrinches, Ciudad Real). Estudio morfológico y tecnólogico

El presente trabajo incluye el estudio de un amplio conjunto cerámico perteneciente al yacimiento arqueológico de la Edad del Cobre y Edad del Bronce de Castillejo del Bonete. La muestra fue recuperada de distintas áreas del asentamiento durante la campaña de excavación de 2012. La investigación ha tenido como fin conocer mejor la relación forma-función de las vasijas, su proceso de fabricación, así como el modelo productivo y las posibles manifestaciones simbólicas presentes en el repertorio analizado. La metodología utilizada para cumplir con los objetivos se ha basado en la recopilación de datos, considerando una serie de variables morfológicas y tecnológicas, y su procesamiento con el empleo de técnicas estadísticas sencillas.

Fronteras en construcción: Diferenciación social y desterritorialización en el Sur ibérico (siglos IX-VI a.C.)

Durante las tres últimas décadas, numerosos/as arqueólogos/as han discutido extensamente sobre el ritual funerario original de las poblaciones del sur ibérico entre los siglos ix y vi a.c., esto es, cremación o inhumación. Este debate está además conectado con la existencia o no de complejidad social antes de la llegada fenicia, con la aparición de una élite “orientalizada” y con la adopción de nuevos objetos y prácticas por las poblaciones locales. En este artículo hago uso del concepto deleuziano de “desterritorialización” y lo asocio con el de “frontera” desarrollado por anzaldúa para interpretar la sociedad del sur ibérico. Para ello, analizo la evidencia funeraria indígena y cuestiono la división estricta entre cremación e inhumación en la región; así como examino la profundidad y significado de los cambios funerarios en las comunidades locales.

La representación del indígena peruano en la novela de José María Arguedas

Programa de doctorado: Literatura y Teoría de la Literatura. La fecha de publicación es la fecha de lectura

Estudo do consumo energético associado ao processo de cozedura na indústria cerâmica

O presente trabalho realizou-se no âmbito do Projeto Galp 20-2020 implementado na empresa Sanindusa, em parceira com a Universidade de Aveiro. Como principal objetivo pretendia-se estudar o consumo de energia durante o processo de cozedura das peças cerâmicas com o intuito de avaliar a viabilidade da substituição do refratário existente na empresa. Uma vez que esta medida implicaria um tempo de retorno do investimento demasiado elevado, optou-se por estudar o consumo de energia associado a uma placa horizontal, de massa unitária, de qualquer tipo de material refratário. Para tal, foi desenvolvido um Modelo Teórico capaz de calcular o calor absorvido por uma placa de refratário ao longo de todo o percurso dentro do Forno Túnel 2, existente na empresa e utilizado no processo de produção das peças cerâmicas. Através deste estudo foi possível concluir que o Modelo Teórico é bastante útil na medida em que permite a criação de vários cenários, através da alteração de diversas variáveis, permitindo conhecer qual o impacto de cada uma no consumo de energia neste equipamento. Como trabalho futuro propõe-se o desenvolvimento do Modelo Teórico apresentado para o estudo da transferência de calor bidimensional. Esta melhoria permitiria analisar o consumo de energia associado a diferentes formas de material refratário utilizado no processo de cozedura de peças cerâmicas (o que não é possível quando se aplica o conceito de transferência de calor unidimensional).

Cerâmica de Santo Antônio do Potengi: entre tradição e modernidade

In the Rio Grande do Norte, the craftsmanship is generating of economy, it involves a significant number of people and is diversified in its raw materials and particular type. As reference of the craft local, the ceramics supplied the primary necessities in the utilitarian domestic servants, acquired piety in the religious figures, were toy in infantile amusements and, finally, gained status of pure ornament. By its historical representation, the district of Santo Antônio do Potengi is considered the most important center of manufacture of craftpottery in the State. The work of the potters continues in that locality anchored between the familiar inheritance and the participation each more influential time of the public politics destined to the sector situation verified for visible alterations in the shape of the pottery from the decade of 1990 with the implantation of a cooperative destined to the collective production. We observe in this passage, that such actions in the measure where they objectify to structuralize conditions ideal to support the artisan making, do not benefit in significant way the social development them craftsmen. It is important not to lose of sight that exists some involved dimensions in this process and that these surpass the common interest for the object and the consequent economic connotation of its commercialization. They are knowledge that imply in the access to raw materials, in the peculiar of the formal aspects and productive methods, in the contextual relations organized to defend the survival of the activity

Relações interétnicas em conflito entre Makuxi e Wapixana na terra indígena Raposa Serra do Sol

This dissertation present an analysis of the interethnic conflict between Makuxi and Wapixana at the current moment in the Maloca of the Adobe, Aboriginal Land Fox-Mountain range of the Sun, in the State of Roraima. The theoretical field was boarded in the Ethnology, pursuing situations in local history, with edges in ethno-history. The research elapsed of the deepening necessity on the social relations and aboriginal politics, for the intercultural professional exercise of educator, appealing the bibliographical survey and participant comment as method; not directive interviews, photographs, filmings and daily register in of field, as techniques carried through in the period of 2006 to 2007. Although to inhabit in the same area and to establish marriages between itself, individuals and groups express tensions, aggravated with the landmark and legal recognition of the area, which generated inter dispute and intraetnias, mainly with the intrusion of farmers, rizicultores and the form of governmental influence. A relation of rivalry, individual and collective was evidenced, suggesting the strengthenig and not it fractionly, of the fights external politics, interns and in way to the cultural diversity and social adversity