Predictable Life-Cycle Shocks, Income Risk and Consumption Inequality

Was the increase in income inequality in the US due to permanent shocks or merely to an increase in the variance of transitory shocks? The implications for consumption and welfare depend crucially on the answer to this question. We use CEX repeated cross-section data on consumption and income to decompose idiosyncratic changes in income into predictable life-cycle changes, transitory and permanent shocks and estimate the contribution of each to total inequality. Our model fits the joint evolution of consumption and income inequality well and delivers two main results. First, we find that permanent changes in income explain all of the increase in inequality in the 1980s and 90s. Second, we reconcile this finding with the fact that consumption inequality did not increase much over this period. Our results support the view that many permanent changes in income are predictable for consumers, even if they look unpredictable to the econometrician, consistent with models of heterogeneous income profiles.

Materials and Mix Optimization Procedures for PCC Pavements, March 2006

Severe environmental conditions, coupled with the routine use of deicing chemicals and increasing traffic volume, tend to place extreme demands on portland cement concrete (PCC) pavements. In most instances, engineers have been able to specify and build PCC pavements that met these challenges. However, there have also been reports of premature deterioration that could not be specifically attributed to a single cause. Modern concrete mixtures have evolved to become very complex chemical systems. The complexity can be attributed to both the number of ingredients used in any given mixture and the various types and sources of the ingredients supplied to any given project. Local environmental conditions can also influence the outcome of paving projects. This research project investigated important variables that impact the homogeneity and rheology of concrete mixtures. The project consisted of a field study and a laboratory study. The field study collected information from six different projects in Iowa. The information that was collected during the field study documented cementitious material properties, plastic concrete properties, and hardened concrete properties. The laboratory study was used to develop baseline mixture variability information for the field study. It also investigated plastic concrete properties using various new devices to evaluate rheology and mixing efficiency. In addition, the lab study evaluated a strategy for the optimization of mortar and concrete mixtures containing supplementary cementitious materials. The results of the field studies indicated that the quality management concrete (QMC) mixtures being placed in the state generally exhibited good uniformity and good to excellent workability. Hardened concrete properties (compressive strength and hardened air content) were also satisfactory. The uniformity of the raw cementitious materials that were used on the projects could not be monitored as closely as was desired by the investigators; however, the information that was gathered indicated that the bulk chemical composition of most materials streams was reasonably uniform. Specific minerals phases in the cementitious materials were less uniform than the bulk chemical composition. The results of the laboratory study indicated that ternary mixtures show significant promise for improving the performance of concrete mixtures. The lab study also verified the results from prior projects that have indicated that bassanite is typically the major sulfate phase that is present in Iowa cements. This causes the cements to exhibit premature stiffening problems (false set) in laboratory testing. Fly ash helps to reduce the impact of premature stiffening because it behaves like a low-range water reducer in most instances. The premature stiffening problem can also be alleviated by increasing the water–cement ratio of the mixture and providing a remix cycle for the mixture.

Credit Constraints, Firms' Precautionary Investment, and the Business Cycle

This paper studies the macroeconomic implications of firms' precautionary investment behavior in response to the anticipation of future financing constraints. Firms increase their demand for liquid and safe investments in order to alleviate future borrowing constraints and decrease the probability of having to forego future profitable investment opportunities. This results in an increase in the share of short-term projects that produces a temporary increase in output, at the expense of lower long-run investment and future output. I show in a calibrated model that this behavior is at the source of a novel and powerful channel of shock transmission of productivity shocks that produces short-run dampening and long-run propagation. Furthermore, it can account for the observed business cycle patterns of the aggregate and firm-level composition of investment.

Injuries Resulted From Breastfeeding: A New Approach To A Known Problem

This study aimed at analyzing nipple trauma resulted from breastfeeding based on dermatological approach. Two integrative reviews of literature were conducted, the first related to definitions, classification and evaluation methods of nipple trauma and another about validation studies related to this theme. In the first part were included 20 studies and only one third defined nipple trauma, more than half did not defined the nipple’s injuries reported, and each author showed a particular way to assess the injuries, without consensus. In the second integrative review, no validation study or algorithm related to nipple trauma resulted from breastfeeding was found. This fact demonstrated that the nipple’s injuries mentioned in the first review did not go through validation studies, justifying the lack of consensus identified as far as definition, classification and assessment methods of nipple trauma.


Role of myosin V in actin cable organization in fission yeast

Functional specialization is tightly linked to the ability of eukaryotic cells to acquire a particular shape. Cell morphogenesis, in turn, relies on the capacity to establish and maintain cell "polarity", which is achieved by orienting the trafficking of signaling molecules and organelles towards specific cellular locations and/or membrane domains. The "oriented" transport is based upon cytoskeletal polymers, microtubules and actin filaments, which serve as tracks for molecular motors. These latter generate motion that is translated either into pulling forces or directed transport. Fission yeast, a rod-like unicellular eukaryote, shapes itself by restricting growth at cell tips through the concerted activity of microtubules and actin cables. Microtubules, which assemble into 2-6 bundles and run parallel to the long axis of the cell, serve to orient growth to the tips. Growth is supported by the actin cytoskeleton, which provides tracks, the cables, for motor-based transport of secretory vesicles. The molecular motors, which bind cargos and deliver them to the tips along cables, are also known as type V myosins (hereafter indicated as myosin V). How the bundles of parallel actin filaments, i.e. the cables, extend from the tips through the cell and whether they serve any other purpose, besides providing tracks, is poorly understood. It is also unclear how the crosstalk between the two cytoskeletal systems is achieved. These are the basic questions I addressed during my PhD. The first part of the thesis work (Chapter two) suggests that the sole function of actin cables in polarized growth is to serve as tracks for motors. The data indicate that cells may have evolved two cytoskeletal systems to provide robustness to the polarization process but in principle a unique cytoskeleton might have been able to direct and support polarized growth. How actin cables are organized within the cell to optimize cargo transport is addressed later on (Chapter three). The major finding, based on the actin cable defect of cells lacking myosin Vs, is that actin filaments self-organize through the activity of the transport motors. In fact, by delivering cargos to cell tips and exerting physical pulling forces on actin filaments, Myosin Vs contribute not only to polarize cargo transport but also actin tracks. Among the cargos transported by Myosin V, which may be relevant to its function in organizing cables, there is likely the endoplasmic reticulum (ER). Actin cables, which run parallel to cortical ER, may serve as tracks for Myosin V. Myosin V-driven displacement, in turn, may account for the dynamic expansion and organization of ER during polarized growth as suggested in Chapter four. The last part of the work (Chapter five) highlights the existence of a crosstalk between actin and microtubules. In absence of myosin V, indeed, microtubules contribute to actin cable organization, likely playing a scaffolding/tethering function. Whether or not the kinesin 1, Klp3, plays any role in such process has to be demonstrated. In conclusion the work proposes a novel role for myosin Vs in actin organization, besides its transport function, and provides molecular tools to further dissect the role of this type of myosin in fission yeast. - La spécialisation fonctionnelle est étroitement connectée à la capacité des cellules eucaryotes d'acquérir une forme particulière. La morphogenèse cellulaire à son tour, est basée sur la capacité d'établir et de maintenir la polarité cellulaire, polarité réalisée en orientant le trafic des molécules signales et des organelles vers des zones cellulaires spécifiques. Ce transport directionnel dépend des polymères du cytosquelette, microtubules et microfilaments, qui servent comme des voies pour les moteurs moléculaires. Ces derniers engendrent du mouvement, traduit soit en force de traction soit en transport directionnel. La levure fissipare, un eucaryote unicellulaire en forme de bâtonnet, acquière sa forme en limitant sa croissance aux extrémités par l'action concertée des microtubules et de l'actine. Les microtubules, qui s'assemblent de façon antiparallèle et parcourent la cellule parallèlement à l'axe longitudinal, servent à orienter la croissance aux extrémités. Cette croissance est permise par le cytosquelette d'actine, fournissant des voies, les câbles, pour le transport actif des vésicules de sécrétion. Les moteurs moléculaires, responsables de ce transport actif sont aussi appelés myosines de type V (par la suite appelés myosines V). La manière dont ces câbles s'étendent depuis l'extrémité jusqu'à l'intérieur de la cellule est peu connue. De plus, on ignore également si ces câbles présentent une fonction autre que le transport. L'interaction entre les deux cytosquelettes est également obscure. Ce sont ces questions de base auxquelles j'ai tenté de répondre lors de ma thèse. La première partie de cette thèse (chapitre II) suggère que les câbles d'actine, pendant la croissance polarisée, fonctionnent uniquement comme des voies pour les moteurs moléculaires. Les données indiqueraient que les cellules ont fait évoluer deux systèmes de cytosquelette pour assurer plus de robustesse au processus de polarisation, bien que, comme nous le verrons, un système unique est suffisant. Au chapitre III, nous verrons comment les câbles d'actine sont organisés à l'intérieur de la cellule afin d'optimiser le transport des cargo. La découverte majeure, réalisée en observant des cellules dont la myosine V fait défaut, est que ces filaments d'actine s'auto organisent grâce au passage des moteurs moléculaires le long de ces voies. En réalité, en délivrant les cargos aux extrémités de la cellule et en exerçant des forces de traction sur les câbles, les myosines V contribuent non seulement à polariser le transport mais également à polariser les voies elles mêmes. Nous verrons également au chapitre IV, que parmi les cargos importants pour l'organisation des câbles, il y aurait le réticulum endoplasmique (RE). En effet, les câbles d'actine, qui s'étalent parallèlement au RE cortical, pourraient servir comme voie pour la myosine V. Cette dernière en retour pourrait être responsable de l'expansion dynamique et de l'organisation du RE pendant la croissance polarisée.

Les paramètres du cycle vital de Physa acuta (Gastropoda, Mollusca) en milieu expérimental.

The values of the life history parameters expressed in the Lotka's equation were measured in the experimental conditions (20ºC, food ad libitum) for the aquatic pumonate Physa acuta. The estimated fitness value allows the population to double in about 4 weeks. The life cycle is very short (about 3 times shorter than for Lymnaea peregra in similar conditions) because of the important relative size of the eggs, a very high growth rate and an early maturity. This kind of strategy seems adaptive in eutrophic and temporary pools, where the adult mortality is important and density-independant. While the longevity shows very poor correlations with all other parameters, adult size, age at maturity and fecundity are strongly correlated. Structural and functionnal interpetations of these correlations are proposed. A mixed strategy seems a good hypothesis for this usually bivoltine species: the little-size, early-maturity and high-fecondity strategy may be selected during the summer, and the big-size, delayed-maturity and poor fecundity strategy during the winter

Problemas entomológicos na cultura do tomate em Cabo Verde. Estudo de caso na Ilha de Santiago

O tomate (Lycopersicon esculentum) é uma das principais hortícolas produzidas na Ilha de Santiago, Cabo Verde. Com o objectivo de se identificar as principais pragas associadas a esta cultura e de se acompanhar a evolução ao longo do ciclo fenológico, instalaram-se parcelas experimentais em São Jorge dos Órgãos, São Domingos e Tarrafal. No presente trabalho caracterizou-se a agricultura cabo-verdiana e ilustrou-se a importância do sector hortícola na agricultura. Descreveu-se sucintamente a cultura do tomate e as variedades utilizadas. Apresentou-se uma revisão bibliográfica para as pragas referenciadas neste país e para as potenciais, incidindo-se principalmente nos meios de protecção. Para a concretização dos objectivos propostos realizaram-se amostragens semanais nas parcelas instaladas. Identificaram-se algumas espécies anteriormente referenciadas como pragas e outras que foram observadas a infestar a cultura: Aphis sp., Brachycaudus sp., cicadelídeo, Megalurothrips sp. e Tuta absoluta. Acompanhou-se a evolução da incidência e da população de tripes, mosquinhas-brancas, lagartas, minas de larvas mineiras, afídeos e mirídeos no período de observação e analisou-se a sua distribuição vertical na planta. Identificou-se Tuta absoluta em campos de agricultores e avaliaram-se os estragos provocados por esta praga, através da realização de inquéritos por questionário aos agricultores afectados.

The Importance of Using Games to Teach English in the 3rd Cycle

The title of this thesis is “The importance of using games to teach English in the 3rd Cycle”. I choose this topic because I think that games are important in the process of learning and because in my opinion not only students but people in general are more motivated to learn when they are having fun or when they are doing something that is interesting. Some authors argue that games stimulate learners to practise, to activate and extend their English vocabulary, and that most students feel more motivated to learn and learn more easily when they are having fun. Games make demands on learners’ intelligence and imagination and calls for active participation. That is exactly what 3rd Cycle students and teachers need in order to have success in their studies and work respectively. The 3rd Cycle students have covered the majority of the grammar and functions contents of the English curriculum in the previous Cycles (the 1st and 2nd Cycle) and in the 3rd Cycle the students need most of their time to put into practice what they have learned before. Games are an effective method to put in practice what they have learned before and also through games they have several contexts and different situations to explore in order to show their knowledge or their vocabulary. The 3rd Cycle students need methods that motivate them to learn and to participate in class and since they already study a specific language function. If the teacher uses an enjoyable method like games students will not get bored and they will be more motivate to participate in class.

Lack of Discipline in Cape Verdean Secondary Schools: The Need to Better Define the Problem and Develop Strategies to Prevent or Manage the Situation

This research paper has been written with the intention to discuss the problem of discipline in Cape Verdean secondary schools. While many of us discuss the effects that student misbehavior has on the student misbehavior has on the student, school and society as a whole, very few of us seek solutions which would impact on the prevention and management of this problem that each day becomes more complicated and harder to handle. This paper will discuss the need to better define discipline at the school level; identify the causes and factors that aggravate the problem, in addition, to provide what I hope to be useful strategies to better manage the problem as we make the effort to reclaim our schools and better educate our students. My research included surveys completed by teachers and student alike as they baffled over the question: what is discipline and how can we better manage discipline problems at our schools?

A polynomial algorithm for special case of the one-machine scheduling problem with time-lags

The standard one-machine scheduling problem consists in schedulinga set of jobs in one machine which can handle only one job at atime, minimizing the maximum lateness. Each job is available forprocessing at its release date, requires a known processing timeand after finishing the processing, it is delivery after a certaintime. There also can exists precedence constraints between pairsof jobs, requiring that the first jobs must be completed beforethe second job can start. An extension of this problem consistsin assigning a time interval between the processing of the jobsassociated with the precedence constrains, known by finish-starttime-lags. In presence of this constraints, the problem is NP-hardeven if preemption is allowed. In this work, we consider a specialcase of the one-machine preemption scheduling problem with time-lags, where the time-lags have a chain form, and propose apolynomial algorithm to solve it. The algorithm consist in apolynomial number of calls of the preemption version of the LongestTail Heuristic. One of the applicability of the method is to obtainlower bounds for NP-hard one-machine and job-shop schedulingproblems. We present some computational results of thisapplication, followed by some conclusions.

Lyfe-cycle effects on household expenditures: A latent-variable approach

Using data from the Spanish household budget survey, we investigate life-cycle effects on several product expenditures. A latent-variable model approach is adopted to evaluate the impact of income on expenditures, controlling for the number of members in the family. Two latent factors underlying repeated measures of monetary and non-monetary income are used as explanatory variables in the expenditure regression equations, thus avoiding possible bias associated to the measurement error in income. The proposed methodology also takes care of the case in which product expenditures exhibit a pattern of infrequent purchases. Multiple-group analysis is used to assess the variation of key parameters of the model across various household life-cycle typologies. The analysis discloses significant life-cycle effects on the mean levels of expenditures; it also detects significant life-cycle effects on the way expenditures are affected by income and family size. Asymptotic robust methods are used to account for possible non-normality of the data.