Survival of antibiotic resistant Pseudomonas strains in different types of water

A study was conducted to investigate the survival of five Pseudomonas strains resistant to antibiotics in different types of water. The selected Pseudomonas strains were designated as strain P1 (CT-29), strain P2 (CT-25), strain P3 (CT-36), strain P4 (CT-20) and strain P5 (CT-27) which were only recovered from farmed fishes. Six types of water viz., distilled water, saline water, tap water, deionized water, pond water and river water were used. Among these experimental waters, river water was found to be the most suitable for long-term survival of these strains. Deionized water did not support survival of all these Pseudomonas strains. Pond water, tap water and distilled water were moderately suitable for strain P1 and strain P4. Saline water was also found to be highly suitable for long-term survival in case of the strain P3 and moderately suitable for normal survival of strain P2 and strain P5.

Survival of antibiotic resistant Aeromonas strains in different water conditions

Studies were conducted to find out the survival of three antibiotic resistant Aeromonas strains in different types of water. The selected Aeromonas strains were A. hydrophila (local), A. sobria (local) and A. hydrophila (Thai), which were only recovered from farmed fishes. Seven types of water were used. Among these experimental water, lake water, distilled water and fish farm pond water had supported the long time survival of A. hydrophila. In contrast, private fish farm pond water was the most favorable for A. sobria. Deionized water was found not to support the survival of any species but Masjid pond water and FRI pond water were found to be moderately suitable for all the species. However, the survival pattern of Thai strain of A. hydrophila was found to have similarity with the survival of the local strain of A. hydrophila.

EVIDENCE FOR TWO TELLURIUM SITES IN DILUTE LIQUID Te-Tl ALLOYS.

Recently, experimental evidence was presented which suggests that as the stoichiometric composition CuTe, NiTe, Tl//2Te and MnTe are approached from pure Te in the liquid state, substantial charge transfer takes place and Te exists in the form Te**y**31 ions with y close to 2. The system studied (Te-Tl) is one in which charge transfer localizes electrons on the tellurium and leads to semiconducting behavior at the stoichiometric composition Tl//2Te.

Thin film shape memory alloys for optical sensing applications

Based on shape memory effect of the sputtered thin film shape memory alloys, different types of micromirror structures were designed and fabricated for optical sensing application. Using surface micromachining, TiNi membrane mirror structure has been fabricated, which can be actuated based on intrinsic two-way shape memory effect of the free-standing TiNi film. Using bulk micromachining, TiNi/Si and TiNi/Si 3N 4microcantilever mirror structures were fabricated. © 2007 IOP Publishing Ltd.

Thin film shape memory alloys and microactuators

For Micro-electro-mechanical System (MEMS) applications, TiNi-based thin film Shape Memory Alloys (SMAs) possess many desirable properties, such as high power density, large transformation stress and strain upon heating and cooling, superelasticity and biocompatibility. In this paper, recent development in TiNi-based thin film SMA and microactuator applications is discussed. The topics related to film deposition and characterisation is mainly focused on crystal nucleation and growth during annealing, film thickness effect, film texture, stress induced surface relief, wrinkling and trenches as well as Temperature Memory Effect (TME). The microactuator applications are mainly focused on microvalve and microcage for biological applications, micromirror for optical applications and data storage using nanoindentation method. Copyright © 2009, Inderscience Publishers.

Distribution of drug resistant luminous bacteria in penaeid shrimp grow-out ponds

Distribution of luminous bacteria (LB) in penaeid shrimp grow-out pond water in semiintensive seawater farming system and their resistance to 15 antibacterials were investigated. Total viable counts and luminous bacterial counts in pond water ranged from 2.00xl03 to 1.35xl04/ml and l.OOxl01 to 8.00Xl02/ml, respectively. The percentage composition of LB in the total viable population increased significantly with period of culture. Five species of LB such as Vibrio fischeri, V. harveyi, V. orientalis, V. splendidus 1 and Photobacterium leiognathi were encountered. V. harveyi was the dominant species, constituting >80% of the total LB. Multiple antibiotic resistance was more common in these LB. Pond water isolates showed resistance to at least four antibacterial agents.

Supersonic laser deposition of Ti and Ti64 alloys

The importance of metal coating technologies drives the continuous improvement of metal deposition techniques for application in a wide range of industrial sectors. This work presents the foundations of a new process technology for the deposition of Ti and Ti64 coatings on various substrates using supersonic powder streams and impact site laser heating. Full density metallic deposits are obtained under appropriate impact conditions without the need for transiting the melting point of the deposited material or substrate leading to large energy savings. Details of the experimental approach will be presented along with the general characteristics of the titanium coatings produced using this novel coatings method.

Studies on arsenical creosote as a wood preservative for marine structures. Part 2. Observation on leaching, corrosion and resistance to borer attack

A detailed study on arsenical creosote with reference to leaching, corrosion and anti-borer properties was carried out. Results showed that aging had very little effect on the preservative which suggested better fixation of the preservative into the wood. Corrosion of mild steel, galvanised iron, aluminium-magnesium alloy (M57S) and copper panels in the preservative was found to be negligible. Normal creosote and low temperature creosote of Regional Research Laboratory, Hyderabad, both fortified with arsenic trioxide resisted borer damage on wooden panels for a period of over five months in the port of Cochin. The performance of low temperature creosote fortified with arsenic was found to be equally satisfactory when compared to normal creosote fortified in the same manner. A loading of 208.6 Kgs/ml³ for Haldu (Adina cordifolia) and 138 Kgs/m³ for Mango (Mangifera indica) in the case of normal creosote and 177 Kgs/m³ for Mango the case of RRL creosote were found to be sufficient for treating the wood.

Problems associated with the over protection of fishing trawlers against sea water corrosion and fouling

Some presently used anti-fouling materials contain metals and other compounds, which are toxic in the environment. Coating products are not always stable, and there is a resulting pollution hazard. In particular if surfaces are poorly prepared and manufactures' instructions are not closely followed the application of anti-fouling substances becomes pointless and dangerous. In addition the salinity, constant biological activity and suspended particles make seawater a highly corrosive material in its own right.

Effect of sulphide on corrosion of copper in seawater

The corrosion of ETP copper in natural seawater and putrid seawater has been studied. The corrosion rates and the sulphide content were monitored at regular intervals. In the absence of oxygen in the putrid media, the presence of sulphide favoured a reduction in the corrosion rate.

Relaxation and fracture characteristics in Co-based amorphous alloys

In this article a study of the fracture characteristics of Co66Fe4Mo2Si16B12 amorphous ribbon in the as-quenched state and after relaxation is presented. In the as-quenched state, the morphology of the crack surface shows a 'vein pattern' structure that corresponds to a large amount of plastic flow. After relaxation the surface morphology of the crack shows that when the temperature of the thermal annealing increases the plastic flow involved in the crack decreases. In the as-quenched state dynamic fracture characteristics (crack branching and stress wave induced crack) have been observed. These dynamic characteristics have not been observed in the relaxed samples but in the samples annealed at 250 °C for 20 min apart from the main crack, a crack along the width of the ribbon has been observed. © 2006 Elsevier B.V. All rights reserved.

Plastic deformation of metals and alloys

This chapter focuses on relationships between plastic deformation structures and mechanical properties in metals and alloys deforming by dislocation glide. We start by summarizing plastic deformation processes, then look at the fundamental mechanisms of plastic deformation and explore how deformation structures evolve. We then turn to experimental techniques for characterization which have allowed deformation microstructures to be quantified in terms of common structural parameters. The microstructural evolution has been described over many length scales and analyzed theoretically based on general principles. The deformation microstructures are related to work hardening stages. Finally we identify correlations between a wide range of microstructural features and mechanical properties, particularly flow stress, and use experimental observations to illustrate their inter-relationships.