Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

Determinação fotométrica do ácido ascórbico

The photometric determination of ascorbic acid with the "E. E. L. portable colorimeter" can be carried" out rapid and conveniently using either 3% HPO3 or 0,4% (COOH) 2 as protective agent. The standards would contain from 2 to 20 micrograms of ascorbic acid per ml of metaphosphoric or oxalic acid solutions. We mix 10 ml of these solutions with 3 ml of the adequate citrate buffer solutions, and we pipet 5 ml of the resulting mixture to a matched test tube containing 5 ml of sodium - 2,6 - dichlorobenzenoneindophenol (80 mg per liter); then we shake well and after 15 seconds the extintion is read using green filter. The readings are subtracted from the blank one. Designating the differences by x and the concentrations of ascorbic acid/ml in the standards by y, we get, with the acid of the method of least squares, the following regression equations: for the metaphosphoric acid Y = 0,543x + 0,629 for the oxalic acid Y = 0,516x + 0,422, which permit, by interpolating, the determination of the ascorbic acid content in plant materials.

Sobre o preparo dos parasitas da malária em distensões espessas, especialmente em amostras supersecas

I) the A. presents a method developed for the preparation of thick blood films, specially old desiccated smears. The observations are based on the experience of more than 53000 blood samples collected in the laboratory of the “Serviço de Malaria do Nordeste” as well as in the research department of the “Serviço de Malaria da Baixada Fluminenese”. II) As in introductory matter, he emphasizes the value of the obstacles presented by overdrying of the thick blood films occurring systematically in great malaria control organizations in which the laboratory receives materials from more or less remote localities, particularly in the Brazilian northeast, in regions invaded by Anopheles gambiae. III) An analysis of the causes of failure of the methods of Chorine and Knowles recorded in the literature for such purposes is given, as well as its adaptability for the simultaneous preparation of large numbers of samples. IV) The method is based the protective action of a previous fixation by a dilute solution of formalin, which, without preventing further dehemoglobinization, prevents morphological alterations in the parasites by the action of Knowles solution which is retained in this metod without modification. V) For washing out the acids of the dehemoglobinizating solution as well as for diluting the Giemsa stain, the A. proposes a very simple technique, extremely convenient for such purpose, which consists in adding acetic acid to the distilled water in the proportion of 1 drop for each 10cc of water, and then increasing the hydrogeni-on concentration to pH 7.2 with a 2% sol. of sodium carbonate. As indicator a 0.02% solution purple-bromcresol prepared in accordante to Medalia, is used. In this reaction there is the formation of the acetic acid ↔ sodium acetate, buffer system very suitable for giving a convenient pH and for preventing the precipitation of the dye, which can be used for two or three batches of 700 or 800 slides each, without changing the staining solution. VI) – The method can be summarized as follow: For a small number of samples, Coplin’s or any other staining jar can be used. Large number of slides must be placed in groups of 10 or 15 units each, the slides being separated by a piece of cardboard, according to Barber & Komp. A) Fix in dilute formalin (2%), during 5 minutes. b) Without washing, put in Knowles solution (see the formula in the text), no more than 20 minutes. c)Two successive washings in distilled water, buffered as explained above (which can be used several times). d) Dry and stain with Giemsa solution, prepared by using 1 drop of the stain for each c. c. of buffered distilled water. Time: 1 hour. E) Was in distilled water and dry.

Considerações sôbre a técnica de determinação do "Índice Lipásico Seabra"

A detailed study of Seabra's lipasic reagent for the diagnostic of tuberculosis has been made. Substrate. The oily emulsion of cotton seed oil containing gum as dispersing agent, presented a pH variation to the ampoulles examined. In these belonging to the same cartoon as well as in those from different cartoons the values obtained electrometrically ranged from pH 5.8-6.4 (Table I). These variations lead us to presuppose: 1) instability of the oily emulsion in gum; 2) spontaneous hydrolysis of the oil; 3) different batches or technique of the oil extraction, or different sources. Buffer: The same variability observed with substrate was found for the buffer. In CHERRY & CRANDALL's method the buffer is pH 7.0. The saline solution from Seabra's oscillated from pH6.25-6.9 (table II). Titration - end point. A colorimetric comparison between the sample and the blank as suggested by Seabra becomes very difficult. The end point in the presence of serum, when phenolphtalein is used as indicator, is very difficult to compare with the blank containing water. Conclusion. The differences observed in the results when the same serum was used, must be due to the variations observed with Seabra's reagents.

Disseny d'un acoblador direccional amb metamaterials

En aquest treball es descriu el disseny d’un acoblador direccional en anell de 1.5λ, habitualment anomenat rat-race, mitjançant metamaterials. S’utilitza una línia microstrip amb gap capacitiu en sèrie i una cel·la left-handed basada en un ressonador d’anells oberts complementari (CSRR), fent així possible una reducció de la longitud de la línia de 270º en un factor 5. Gràcies a aquesta disminució de longitud, l’àrea del dispositiu és 4 vegades menor que la del rat-race convencional. La mesura mostra que el comportament és el desitjat a la freqüència d’operació.

Quantitative method of viral pollution determination for large volume of water using ferric hydroxide gel impregnated on the surface of glassfibre cartridge

Quantitative method of viral pollution determination for large volume of water using ferric hydroxide gel impregnated on the surface of glassfibre cartridge filter. The use of ferric hydroxide gel, impregnated on the surface of glassfibre cartridge filter enable us to recover 62.5% of virus (Poliomylitis type I, Lsc strain) exsogeneously added to 400 liters of tap-water. The virus concentrator system consists of four cartridge filters, in which the three first one are clarifiers, where the contaminants are removed physically, without significant virus loss at this stage. The last cartridge filter is impregnated with ferric hydroxide gel, where the virus is adsorbed. After the required volume of water has been processed, the last filter is removed from the system and the viruses are recovered from the gel, using 1 liter of glycine/NaOH buffer, at pH 11. Immediately the eluate is clarified through series of cellulose acetate membranes mounted in a 142mm Millipore filter. For the second step of virus concentration, HC1 1N is added slowly to the eluate to achieve pH 3.5-4. MgC1, is added to give a final concentration of 0.05M and the viruses are readsorbed on a 0.45 , porosity (HA) cellulose acetate membrane, mounted in a 90 mm Millipore filter. The viruses are recovered using the same eluent plus 10% of fetal calf serum, to a final volume of 3 ml. In this way, it was possible to concentrate virus from 400 liters of tap-water, into 1 liter in the first stage of virus concentration and just to 3 ml of final volume in a second step. The efficiency, simplicity and low operational cost, provded by the method, make it feasible to study viral pollution of recreational and tap-water sources.

Disseny d'un divisor de potència programable per aplicació a antenes reconfigurables

En sistemes de comunicacions moderns, es dedica un interès especial als circuits i dispositius reconfigurables, tant per aplicacions comercials com militars. Aquest interès es fonamenta en la necessitat de sistemes d'altes prestacions i en les especificacions creixentment restrictives que això suposa en un ampli ventall d'aspectes. Dins aquest marc de reconfigurabilitat i adaptabilitat s'emmcarca el disseny proposat en el present projecte: un divisor de potència variable.

Study of some parameters affecting the in vitro cultivation of Plasmodium falciparum within saimiri sciureus red blood cells

The in vitro growth and multiplication of the erythrocytic stages of Plasmodium falciparum within Saimiri sciureus (squirrel monkey) red blood cells have been studied. Various parameters, such as the origin of the red blood cells and serum supplement, nature of the buffer, influence of the final pH of the medium, role of proteose peptone and glucose addition, were investigated. The selection of the best culture conditions led to the obtention of a reproducible in vitro growth of two parasite cycles in Saimiri erythrocytes, which is an useful achievement for in vitro studies. Our failure to establish a continuous culture line for longer than 19 days, could be explained by a dramatic increasing of osmotic fragility of the Saimiri red blood cells related to their small size.

Disseny i implementació hardware d'algorismes de reconeixement de caràcters per comptadors d'aigua

Aquest projecte consisteix en l'estudi, comparació i implementació en hardware d'algoritmes de reconeixement de caràcters per integrar en un sistema intel·ligent de captura d'imatges. Aquest sistema, integrat per una càmera amb format i característiques específiques i que anirà acoblat a un comptador d'aigua tradicional, en captarà imatges i les enviarà per RF al punt de recepció de la companyia. L'objectiu principal consisteix en aconseguir un disseny que redueixi al màxim la quantitat d'informació per transmetre, tenint en compte les limitacions de l'entorn.

FIB una eina per a l'enginyeria de materials

En aquest projecte es presenta la tecnologia FIB com una eina capaç d'oferir solucions de nanocaracterització i nanofabricació dins de l'entorn del BCN-b. En primer lloc es fa una breu descripció dels fenòmens que ocorren durant la utilització de l'equip i sobre les característiques i components que l'integren. S'analitza casos concrets d'inspecció de seccions de mostres de diferents naturalesa (materials multicapa, dispositius electromecànics i òptics, materials biològics), de preparació de mostres TEM, d'edició de circuits electrònics, de nanofabricació sobre diferents materials (conductors i aïllants) i de nanoexperimentació. Aquestes aplicacions són exemples sobre l'ús que ha tingut l'equip durant la realització d'aquest projecte i, sobretot, serveixen de carta de presentació sobre el gran ventall de possibilitats que, amb el CrossBeam 1560 XB, es pot oferir. Finalment, es conclou explicant quina serà la política de funcionament de l'equip i les previsions sobre la seva gestió.

Implantación de un ERP en una compañía de apuestas por Internet

Aquest projecte intenta cobrir les necessitats que genera una empresa nova que vol vendre loteria a Internet. Es necessita tenir ben definits els circuits de compra, de venda, de facturació, de control d'existències, de cobraments i de pagaments, entre d'altres. Per gestionar tota aquesta activitat, s’ha fet servir el ERP Navision amb SQL Server, adaptant-lo i creant noves funcionalitats. L'aplicació Web ha estat integrada amb Navision i s'ha desenvolupat la seva funcionalitat, tenint sessions per a usuari amb comptes propis que permeten la consulta i la compra dels productes que ofereix l'empresa.

Laboratorio virtual de sistemas digitales

El projecte "Laboratori virtual de sistemes digitals" és un simulador de l'aula de pràctiques de l'assignatura de sistemes digitals, desenvolupat en Java. Integra tots els components que es troben els estudiants de la matèria quan han de realitzar les pràctiques: placa, xips, cables, generador d'ones, oscil·loscopi.... I es permetrà així la implementació i prova de circuits digitals. També pretén ser una eina útil pel funcionament de la part pràctica de l'assignatura, sent un recurs gratuït i accessible gràcies a Internet.

Arquitectura wormhole per a una NoC 2D-Mesh

Aquest projecte presenta la implementació d'un disseny, i la seva posterior síntesi en una FPGA, d'una arquitectura de tipus wormhole packet switching per a una infraestructura de NetWork-On-Chip amb una topologia 2D-Mesh. Agafant un router circuit switching com a punt de partida, s'han especificat els mòduls en Verilog per tal d'obtenir l'arquitectura wormhole desitjada. Dissenyar la màquina de control per governar els flits que conformen els paquets dins la NoC,i afegir les cues a la sortida del router (outuput queuing) són els punts principals d'aquest treball. A més, com a punt final s'han comparat ambdues arquitectures de router en termes de costos en àrea i en memòria i se n’han obtingut diverses conclusions i resultats experimentals.

Avaluació dels algorismes d'encaminament per a una NoC amb topologia Mesh 2D

Aquest projecte presenta una avaluació de les diferents alternatives d'encaminament per a una NoC amb una topologia mesh 2D. Per tal d'exposar aquestes alternatives s'ha estudiat la composició d'un router implementat amb l'algorisme determinista XY i s'ha adaptat per tal que aquest suportés els algorismes parcialment adaptatius West First, North Last i Negative First. Un cop tenim els routers implementats es disposa un estudi dels diferents algorismes i com cadascun d'aquests actuen en front uns mateixos estímuls per tal de crear una comparativa entre ells que ens faciliti una elecció a priori.

High-resolution magnetic resonance imaging quantitatively detects individual pancreatic islets.

OBJECTIVE-We studied whether manganese-enhanced high-field magnetic resonance (MR) imaging (MEHFMRI) could quantitatively detect individual islets in situ and in vivo and evaluate changes in a model of experimental diabetes.RESEARCH DESIGN AND METHODS-Whole pancreata from untreated (n = 3), MnCl(2) and glucose-injected mice (n = 6), and mice injected with either streptozotocin (STZ; n = 4) or citrate buffer (n = 4) were imaged ex vivo for unambiguous evaluation of islets. Exteriorized pancreata of MnCl(2) and glucose-injected mice (n = 6) were imaged in vivo to directly visualize the gland and minimize movements. In all cases, MR images were acquired in a 14.1 Testa scanner and correlated with the corresponding (immuno)histological sections.RESULTS-In ex vivo experiments, MEHFMRI distinguished different pancreatic tissues and evaluated the relative abundance of islets in the pancreata of normoglycemic mice. MEHFMRI also detected a significant decrease in the numerical and volume density of islets in STZ-injected mice. However, in the latter measurements the loss of beta-cells was undervalued under the conditions tested. The experiments on the externalized pancreata confirmed that MEHFMRI could visualize native individual islets in living, anesthetized mice.CONCLUSIONS-Data show that MEHFMRI quantitatively visualizes individual islets in the intact mouse pancreas, both ex vivo and in vivo. Diabetes 60:2853-2860, 2011