In search of the interrelatedness of innovation and internationalisation processes in entrepreneurial life science companies

This study is motivated by the question how resource scarce innovative entrepreneurial companies seek and leverage global resources. This study takes a resource-seeking perspective a step forward and suggests that resources that enable the entrepreneurial internationalisation are largely accrued from the early stages of entrepreneurial life; that is from the innovation development. Consequently, this study seeks to explain how innovation and internationalisation processes are interrelated in the entrepreneurial internationalisation. This main objective is approached through three research questions, (1) What role do inter-organisational relationships in innovation have in the entrepreneurial internationalisation process? (2) What kind of inward–outward links do inter-organisational relationships create in the resource-seeking-based entrepreneurial internationalisation process? (3) What kind of capability to collaborate forms in the interaction of inter-organisational relationship deployment? The research design is a mixed methods design that consists of quantitative pilot study and qualitative multiple case study of five entrepreneurial life science companies from Finland and Austria. The findings show that innovation and internationalisation processes are tightly interwoven in pre-internationalisation state. The findings also reveal that the more experienced companies are able to take advantage of complexcross-border inter-organisational relationship structures better than the starting companies. However, very minor evidence was found on inward links translating into outward links in the entrepreneurial internationalisation process, despite the expectation to observe more of these links in the data. Combined intangible-tangible resource-seeking was the most preferred to build links between inward–outward internationalisation but also to develop competence to collaborate. By adopting a resource- instead of market-seeking approach, this study illustrated that internationalisation extends to early stages of innovative companies, and that in high-technology companies’ potentially significant cross-border relationships have started to form long before incorporation. Therefore, these observations justified the firmer inclusion of pre-company history in innovative entrepreneurship studies. The study offers a conceptualisation of entrepreneurial internationalisation that is perceived as a process. The main theoretical contributions are in the areas of international entrepreneurship and in the behavioural process studies of entrepreneurial internationalisation and resource-based internationalisation. The inclusion of the innovation-based discussion, namely the innovation process, in the internationalisation process theories has clearly contributed to the understanding of entrepreneurial internationalisation in the context of international entrepreneurship. Innovation development is a central act of entrepreneurial companies, and neglecting innovation process investigation from entrepreneurial internationalisation leaves potentially influential mechanisms unexplored.

Who expects what from whom? : a gender based study on expectations and secondary school administration

This study is about expectations and aspirations of secondary school teachers. It is an investigation of why some teachers aspire to become administrators and why some teachers do not. My research compares expectations and existing attltudes regarding aspirations toward administration which are held by three distinct groups within the secondary school system: 1) principals/vice-principals, 2) aspiring teachers, and 3) non-aspiring teachers. This study questions why, in the late 60's, secondary school administration is still predominated by men. The conclusions and recommendations were based on interviews with thirty men and women in the Hamilton Secondary School System. In addltion, Mr. Keith Rielly, Superintendent of Operations, made valuable contributions to my work. The interviews revealed experiences and percept ions of men and women in di scourse about f amil y re lat i onshi ps, educational choices and perceived internal and external barriers which inhiblted or enhanced their decision to aspire to secondary school administration. Candidates spoke about their personal and professional Hves wlth respect to encouragement, perceived images of an administrator, netWOrking and the effect of marriage and children on their careers. Historically, women have not accepted the challenge of administration and It would appear as if this is still the case today. My research suggests that women are under-represented in secondary school administration because of internal and external barriers which discourage many women from aspiring. I conclude that many of women's internal barrlers are reinforced by external roadblocks which prevent women from aspiring to secondory school administration. Thus. many women who do not envision a future in educational administration establish priorities outside the general realm of education. I recommend that males and females recognize that women make valuable contributions to educational theory and design based on their experiences which may be "differene from mole experiences. but just as significant. Mole and female representation in secondary school administration represents a balance between attitudes and behaviours which can not be accomplished when an administrative offlce is dominated by on all ma1e or all female staff.

Essays in theoretical and applied macroeconomics

Cette thèse s’articule autour de trois chapitres indépendants qui s’inscrivent dans les champs de la macroéconomie, de l’économie monétaire et de la finance internationale. Dans le premier chapitre, je construis un modèle néo-keynesien d’équilibre général sous incertitude pour examiner les implications de la production domestique des ménages pour la politique monétaire. Le modèle proposé permet de reconcilier deux faits empiriques majeurs: la forte sensibilité du produit intérieur brut aux chocs monétaires (obtenue à partir des modèles VAR), et le faible degré de rigidité nominale observé dans les micro-données. Le deuxième chapitre étudie le role de la transformation structurelle (réallocation de la main d’oeuvre entre secteurs) sur la volatilité de la production aggregée dans un panel de pays. Le troisième chapitre quant à lui met en exergue l’importance de la cartographie des échanges commerciaux pour le choix entre un régime de change fixe et l’arrimage à un panier de devises. "Household Production, Services and Monetary Policy" (Chapitre 1) part de l’observation selon laquelle les ménages peuvent produire à domicile des substituts aux services marchands, contrairement aux biens non durables qu’ils acquièrent presque exclusivement sur le marché. Dans ce contexte, ils procèdent à d’importants arbitrages entre produire les services à domicile ou les acquerir sur le marché, dépendamment des changements dans leur revenu. Pour examiner les implications de tels arbitrages (qui s’avèrent être importants dans les micro-données) le secteur domestique est introduit dans un modèle néo-keyenesien d’équilibre général sous incertitude à deux secteurs (le secteur des biens non durables et le secteur des services) autrement standard. Je montre que les firmes du secteur des services sont moins enclin à changer leurs prix du fait que les ménages ont l’option de produire soit même des services substituts. Ceci se traduit par la présence d’un terme endogène supplémentaire qui déplace la courbe de Phillips dans ce secteur. Ce terme croit avec le degré de substituabilité qui existe entre les services produits à domicile et ceux acquis sur le marché. Cet accroissement de la rigidité nominale amplifie la sensibilité de la production réelle aux chocs monétaires, notamment dans le secteur des services, ce qui est compatible avec l’évidence VAR selon laquelle les services de consommation sont plus sensibles aux variations de taux d’intérêt que les biens non durables. "Structural Transformation and the Volatility of Aggregate Output: A Cross-country Analysis" (Chapitre 2) est basée sur l’évidence empirique d’une relation négative entre la part de la main d’oeuvre allouée au secteur des services et la volatilité de la production aggrégée, même lorsque je contrôle pour les facteurs tels que le développement du secteur financier. Ce resultat aggregé est la conséquence des développements sectoriels: la productivité de la main d’oeuvre est beaucoup plus volatile dans l’agriculture et les industries manufacturières que dans les services. La production aggregée deviendrait donc mécaniquement moins volatile au fur et à mesure que la main d’oeuvre se déplace de l’agriculture et de la manufacture vers les services. Pour évaluer cette hypothèse, je calibre un modèle de transformation structurelle à l’économie américaine, que j’utilise ensuite pour générer l’allocation sectorielle de la main d’oeuvre dans l’agriculture, l’industrie et les services pour les autres pays de l’OCDE. Dans une analyse contre-factuelle, le modèle est utlisé pour restreindre la mobilité de la main d’oeuvre entre secteurs de façon endogène. Les calculs montrent alors que le déplacement de la main d’oeuvre vers le secteur des services réduit en effet la volatilité de la production aggregée. "Exchange Rate Volatility under Alternative Peg Regimes: Do Trade Patterns Matter?" (Chapitre 3) est une contribution à la litterature économique qui s’interesse au choix entre divers regimes de change. J’utilise les données mensuelles de taux de change bilatéraux et de commerce extérieur entre 1980 et 2010 pour les pays membre de l’Union Economique et Monétaire Ouest Africaine (UEMOA). La monnaie de ces pays (le franc CFA) est arrimée au franc Francais depuis le milieu des années 40 et à l’euro depuis son introduction en 1999. Au moment de l’arrimage initial, la France était le principal partenaire commercial des pays de l’UEMOA. Depuis lors, et plus encore au cours des dix dernières années, la cartographie des échanges de l’union a significativement changé en faveur des pays du groupe des BICs, notamment la Chine. Je montre dans ce chapitre que l’arrimage à un panier de devises aurait induit une volatilité moins pronnoncée du taux de change effectif nominal du franc CFA au cours de la décennie écoulée, comparé à la parité fixe actuelle. Ce chapitre, cependant, n’aborde pas la question de taux de change optimal pour les pays de l’UEMOA, un aspect qui serait intéressant pour une recherche future.

Role of histone methylation in the regulation of COX-2, iNOS, and mPGES-1 gene expression in human chondrocytes: Implication for Osteoarthritis

L'arthrose (OA) est une maladie articulaire dégénérative, classée comme la forme la plus fréquente au monde. Elle est caractérisée par la dégénérescence du cartilage articulaire, l’inflammation de la membrane synoviale, et le remodelage de l’os sous-chondral. Ces changements structurels et fonctionnels sont dues à de nombreux facteurs. Les cytokines, les prostaglandines (PG), et les espèces réactives de l'oxygène sont les principaux médiateurs impliqués dans la pathophysiologie de l'OA. L'interleukine-1β (IL-1β) est une cytokine pro-inflammatoire majeure qui joue un rôle crucial dans l'OA. L'IL-1β induit l'expression de la cyclooxygénase-2 (COX-2), la microsomale prostaglandine E synthase-1 (mPGES-1), la synthase inductible de l'oxyde nitrique (iNOS), ainsi que leurs produits la prostaglandine E2 (PGE2) et l'oxyde nitrique (NO). Ce sont des médiateurs essentiels de la réponse inflammatoire au cours de l'OA qui contribuent aux mécanismes des douleurs, de gonflement, et de destruction des tissus articulaires. Les modifications épigénétiques jouent un rôle très important dans la régulation de l’expression de ces gènes pro-inflammatoires. Parmi ces modifications, la méthylation/ déméthylation des histones joue un rôle critique dans la régulation des gènes. La méthylation/ déméthylation des histones est médiée par deux types d'enzymes: les histones méthyltransférases (HMT) et les histones déméthylases (HDM) qui favorisent l’activation et/ou la répression de la transcription. Il est donc nécessaire de comprendre les mécanismes moléculaires qui contrôlent l’expression des gènes de la COX-2, la mPGES-1, et l’iNOS. L'objectif de cette étude est de déterminer si la méthylation/déméthylation des histones contribute à la régulation de l’expression des gènes COX-2, mPGES-1, et iNOS dans des chondrocytes OA humains induits par l'IL-1β. Nous avons montré que la méthylation de la lysine K4 de l'histone H3 (H3K4) par SET-1A contribue à l’activation des gènes COX-2 et iNOS dans les chondrocytes humains OA induite par l'IL-1β. Nous avons également montré que la lysine K9 de l’histone H3 (H3K9) est déméthylée par LSD1, et que cette déméthylation contribue à l’expression de la mPGES-1 induite par IL-1β dans les chondrocytes humains OA. Nous avons aussi trouvé que les niveaux d'expression des enzymes SET-1A et LSD1 sont élevés au niveau du cartilage OA. Nos résultats montrent, pour la première fois, l'implication de la méthylation/ déméthylation des histones dans la régulation de l’expression des gènes COX-2, mPGES-1, et iNOS. Ces données suggèrent que ces mécanismes pourraient être une cible potentielle pour une intervention pharmacologique dans le traitement de la physiopathologie de l'OA.

Antibody Based Diagnostic for Detection Of Vibrios and their Biological Control using Antagonistic Bacteria in Macrobrachium Rosenbergii Larval Rearing Systems

The main objective of the work undertaken here was to develop an appropriate microbial technology to protect the larvae of M.rosenbergii in hatchery from vibriosis. This technology precisely is consisted of a rapid detection system of vibrios and effective antagonistic probiotics for the management of vibrios. The present work was undertaken with the realizations that to stabilize the production process of commercial hatcheries an appropriate, comprehensive and fool proof technology is required primarily for the rapid detection of Vibrio and subsequently for its management. Nine species of Vibrio have been found to be associated with larvae of M. rosenbergii in hatchery. Haemolytic assay of the Vibrio and Aeromonas on prawn blood agar showed that all isolates of V. alginolyticus and Aeromonas sp., from moribund, necrotized larve were haemolytic and the isolates of V.cholerae, V.splendidus II, V.proteolyticus and V.fluvialis from the larvae obtained from apparently healthy larval rearing systems were non-haemolytic. Hydrolytic enzymes such as lipase, chitinase and gelatinase were widespread amongst the Vibrio and Aeromonas isolates. Dominance of V.alginolyticus among the isolates from necrotic larvae and the failure in isolating them from rearing water strongly suggest that they infect larvae and multiply in the larval body and cause mortality in the hatchery. The observation suggested that the isolate V. alginolyticus was a pathogen to the larvae of M.rosenbergii. To sum up, through this work, nine species of Vibrio and genus Aeromonas associated with M.rosenbergii larval rearing systems could be isolated and segregated based on the haemolytic activity and the antibodies (PA bs) for use in diagnosis or epidemiological studies could be produced, based on a virulent culture of V.alginolyticus. This could possibly replace the conventional biochemical tests for identification. As prophylaxis to vibriosis, four isolates of Micrococcus spp. and an isolate of Pseudomonas sp. could be obtained which could possibly be used as antagonistic probiotics in the larval rearing system of M.rosenbergii.

Photothermal and photoacoustic investigations on certain polymers and semi conducting materials

Material synthesizing and characterization has been one of the major areas of scientific research for the past few decades. Various techniques have been suggested for the preparation and characterization of thin films and bulk samples according to the industrial and scientific applications. Material characterization implies the determination of the electrical, magnetic, optical or thermal properties of the material under study. Though it is possible to study all these properties of a material, we concentrate on the thermal and optical properties of certain polymers. The thermal properties are detennined using photothermal beam deflection technique and the optical properties are obtained from various spectroscopic analyses. In addition, thermal properties of a class of semiconducting compounds, copper delafossites, arc determined by photoacoustic technique.Photothermal technique is one of the most powerful tools for non-destructive characterization of materials. This forms a broad class of technique, which includes laser calorimetry, pyroelectric technique, photoacollstics, photothermal radiometric technique, photothermal beam deflection technique etc. However, the choice of a suitable technique depends upon the nature of sample and its environment, purpose of measurement, nature of light source used etc. The polynler samples under the present investigation are thermally thin and optically transparent at the excitation (pump beam) wavelength. Photothermal beam deflection technique is advantageous in that it can be used for the detennination of thermal diffusivity of samples irrespective of them being thermally thick or thennally thin and optically opaque or optically transparent. Hence of all the abovementioned techniques, photothemlal beam deflection technique is employed for the successful determination of thermal diffusivity of these polymer samples. However, the semi conducting samples studied are themlally thick and optically opaque and therefore, a much simpler photoacoustic technique is used for the thermal characterization.The production of polymer thin film samples has gained considerable attention for the past few years. Different techniques like plasma polymerization, electron bombardment, ultra violet irradiation and thermal evaporation can be used for the preparation of polymer thin films from their respective monomers. Among these, plasma polymerization or glow discharge polymerization has been widely lIsed for polymer thin fi Im preparation. At the earlier stages of the discovery, the plasma polymerization technique was not treated as a standard method for preparation of polymers. This method gained importance only when they were used to make special coatings on metals and began to be recognized as a technique for synthesizing polymers. Thc well-recognized concept of conventional polymerization is based on molecular processcs by which thc size of the molecule increases and rearrangemcnt of atoms within a molecule seldom occurs. However, polymer formation in plasma is recognized as an atomic process in contrast to the above molecular process. These films are pinhole free, highly branched and cross linked, heat resistant, exceptionally dielectric etc. The optical properties like the direct and indirect bandgaps, refractive indices etc of certain plasma polymerized thin films prepared are determined from the UV -VIS-NIR absorption and transmission spectra. The possible linkage in the formation of the polymers is suggested by comparing the FTIR spectra of the monomer and the polymer. The thermal diffusivity has been measured using the photothermal beam deflection technique as stated earlier. This technique measures the refractive index gradient established in the sample surface and in the adjacent coupling medium, by passing another optical beam (probe beam) through this region and hence the name probe beam deflection. The deflection is detected using a position sensitive detector and its output is fed to a lock-in-amplifIer from which the amplitude and phase of the deflection can be directly obtained. The amplitude and phase of the deflection signal is suitably analyzed for determining the thermal diffusivity.Another class of compounds under the present investigation is copper delafossites. These samples in the form of pellets are thermally thick and optically opaque. Thermal diffusivity of such semiconductors is investigated using the photoacoustic technique, which measures the pressure change using an elcctret microphone. The output of the microphone is fed to a lock-in-amplificr to obtain the amplitude and phase from which the thermal properties are obtained. The variation in thermal diffusivity with composition is studied.

Aqueous Sol-gel Process for Nanocrystalline Photocatalytic Titania, Transparent Functional Coatings and Ceramic Membrane

The present thesis develops from the point of view of titania sol-gel chemistry and an attempt is made to address the modification of the process for better photoactive titania by selective doping and also demonstration of utilization of the process for the preparation of supported membranes and self cleaning films.A general introduction to nanomaterials, nanocrystalline titania and sol-gel chemistry are presented in the first chapter. A brief and updated literature review on sol-gel titania, with special emphasis on catalytic and photocatalytic properties and anatase to rutile transformation are covered. Based on critical assessment of the reported information the present research problem has been defined.The second chapter describes a new aqueous sol-gel method for the preparation of nanocrystalline titania using titanyl sulphate as precursor. This approach is novel since no earlier work has been reported in the same lines proposed here. The sol-gel process has been followed at each step using particle size, zeta potential measurements on the sol and thermal analysis of the resultant gel. The prepared powders were then characterized using X-ray diffraction, FTIR, BET surface area analysis and transmission electron microscopy.The third chapter presents a detailed discussion on the physico-chemical characterization of the aqueous sol-gel derived doped titania. The effect of dopants such as tantalum, gadolinium and ytterbium on the anatase to rutile phase transformation, surface area as well as their influence on photoactivity is also included. The fourth chapter demonstrates application of the aqueous sol-gel method in developing titania coatings on porous alumina substrates for controlling the poresize for use as membrane elements in ultrafiltration. Thin coatings having ~50 nm thickness and transparency of ~90% developed on glass surface were tested successfully for self cleaning applications.

“Development of lymphoid cell culture system from Penaeus monodon and molecular approaches for its transformation

Unveiling the molecular and regulatory mechanisms that prevent in vitro transformation in shrimp remains elusive in the development of continuous cell lines, with an arduous history of over 25 years (Jayesh et al., 2012). Despite presenting challenges to researchers in developing a cell line, the billion dollar aquaculture industry is under viral threat. In addition, the regulatory mechanisms that prevent in vitro transformation and carcinoma in shrimps might provide new leads for the development of anti-ageing and anti-cancer interventions in human (Vogt, 2011) and in higher vertebrates. This highlights the importance of developing shrimp cell lines, to bring out effective prophylactics against shrimp viruses and for understanding the mechanism that induce cancer and ageing in human.. Advances in molecular biology and various gene transfer technologies for immortalization of cells have resulted in the development of hundreds of cell lines from insects and mammals, but yet not a single cell line has been developed from shrimp and other marine invertebrates. With this backdrop, the research described in this thesis attempted to develop molecular tools for induced in vitro transformation in lymphoid cells from Penaeus monodon and for the development of continuous cell lines using conventional and novel technologies to address the problems at cellular and molecular level.

Development of a Biometric Personal Authentication System Based on Fingerprint and Speech

Biometrics deals with the physiological and behavioral characteristics of an individual to establish identity. Fingerprint based authentication is the most advanced biometric authentication technology. The minutiae based fingerprint identification method offer reasonable identification rate. The feature minutiae map consists of about 70-100 minutia points and matching accuracy is dropping down while the size of database is growing up. Hence it is inevitable to make the size of the fingerprint feature code to be as smaller as possible so that identification may be much easier. In this research, a novel global singularity based fingerprint representation is proposed. Fingerprint baseline, which is the line between distal and intermediate phalangeal joint line in the fingerprint, is taken as the reference line. A polygon is formed with the singularities and the fingerprint baseline. The feature vectors are the polygonal angle, sides, area, type and the ridge counts in between the singularities. 100% recognition rate is achieved in this method. The method is compared with the conventional minutiae based recognition method in terms of computation time, receiver operator characteristics (ROC) and the feature vector length. Speech is a behavioural biometric modality and can be used for identification of a speaker. In this work, MFCC of text dependant speeches are computed and clustered using k-means algorithm. A backpropagation based Artificial Neural Network is trained to identify the clustered speech code. The performance of the neural network classifier is compared with the VQ based Euclidean minimum classifier. Biometric systems that use a single modality are usually affected by problems like noisy sensor data, non-universality and/or lack of distinctiveness of the biometric trait, unacceptable error rates, and spoof attacks. Multifinger feature level fusion based fingerprint recognition is developed and the performances are measured in terms of the ROC curve. Score level fusion of fingerprint and speech based recognition system is done and 100% accuracy is achieved for a considerable range of matching threshold

Wave Height Ano Speotral Transformation In The Shallow Waters Of Kerala Ooast And Their Preoiotion

There are basically two methods for prediction of shallow water waves, viz. the graphical method and the numerical method. The numerical methods are being widely used, now—a—days, because they are fast, accurate and are especially useful when the prediction over a large spatial frame is required. Practically little has been done on the development of numerical models for the prediction of height and spectral transformation of waves as applicable to our coasts. Synchronized deep and shallow water wave measurements which are essential for study of wave transformation are very much lacking for our coasts. Under these circumstances, a comprehensive study of the wave transformation in the shallow waters of our coast was felt very important and is undertaken in the present investigation.

Changing Role of Academic Libraries in the E-learning Environment: Issues and Challenges

The development of computer and network technology is changing the education scenario and transforming the teaching and learning process from the traditional physical environment to the digital environment. It is now possible to access vast amount of information online and enable one to one communication without the confines of place or time. While E-learning and teaching is unlikely to replace face-to-face training and education it is becoming an additional delivery method, providing new learning opportunities to many users. It is also causing an impact on library services as the increased use of ICT and web based learning technologies have paved the way for providing new ICT based services and resources to the users. Online learning has a crucial role in user education, information literacy programmes and in training the library professionals. It can help students become active learners, and libraries will have to play a greater role in this process of transformation. The significance of libraries within an institution has improved due to the fact that academic libraries and information services are now responsible for e-learning within their organization.

FEM based Virtual Prototyping and Design of Third Harmonic Excitation System for Low Voltage Brushless Alternators

Salient pole brushless alternators coupled to IC engines are extensively used as stand-by power supply units for meeting in- dustrial power demands. Design of such generators demands high power to weight ratio, high e ciency and low cost per KVA out- put. Moreover, the performance characteristics of such machines like voltage regulation and short circuit ratio (SCR) are critical when these machines are put into parallel operation and alterna- tors for critical applications like defence and aerospace demand very low harmonic content in the output voltage. While designing such alternators, accurate prediction of machine characteristics, including total harmonic distortion (THD) is essential to mini- mize development cost and time. Total harmonic distortion in the output voltage of alternators should be as low as possible especially when powering very sophis- ticated and critical applications. The output voltage waveform of a practical AC generator is replica of the space distribution of the ux density in the air gap and several factors such as shape of the rotor pole face, core saturation, slotting and style of coil disposition make the realization of a sinusoidal air gap ux wave impossible. These ux harmonics introduce undesirable e ects on the alternator performance like high neutral current due to triplen harmonics, voltage distortion, noise, vibration, excessive heating and also extra losses resulting in poor e ciency, which in turn necessitate de-rating of the machine especially when connected to non-linear loads. As an important control unit of brushless alternator, the excitation system and its dynamic performance has a direct impact on alternator's stability and reliability. The thesis explores design and implementation of an excitation i system utilizing third harmonic ux in the air gap of brushless al- ternators, using an additional auxiliary winding, wound for 1=3rd pole pitch, embedded into the stator slots and electrically iso- lated from the main winding. In the third harmonic excitation system, the combined e ect of two auxiliary windings, one with 2=3rd pitch and another third harmonic winding with 1=3rd pitch, are used to ensure good voltage regulation without an electronic automatic voltage regulator (AVR) and also reduces the total harmonic content in the output voltage, cost e ectively. The design of the third harmonic winding by analytic methods demands accurate calculation of third harmonic ux density in the air gap of the machine. However, precise estimation of the amplitude of third harmonic ux in the air gap of a machine by conventional design procedures is di cult due to complex geome- try of the machine and non-linear characteristics of the magnetic materials. As such, prediction of the eld parameters by conven- tional design methods is unreliable and hence virtual prototyping of the machine is done to enable accurate design of the third har- monic excitation system. In the design and development cycle of electrical machines, it is recognized that the use of analytical and experimental methods followed by expensive and in exible prototyping is time consum- ing and no longer cost e ective. Due to advancements in com- putational capabilities over recent years, nite element method (FEM) based virtual prototyping has become an attractive al- ternative to well established semi-analytical and empirical design methods as well as to the still popular trial and error approach followed by the costly and time consuming prototyping. Hence, by virtually prototyping the alternator using FEM, the important performance characteristics of the machine are predicted. Design of third harmonic excitation system is done with the help of results obtained from virtual prototype of the machine. Third harmonic excitation (THE) system is implemented in a 45 KVA ii experimental machine and experiments are conducted to validate the simulation results. Simulation and experimental results show that by utilizing third harmonic ux in the air gap of the ma- chine for excitation purposes during loaded conditions, triplen harmonic content in the output phase voltage is signi cantly re- duced. The prototype machine with third harmonic excitation system designed and developed based on FEM analysis proved to be economical due to its simplicity and has the added advan- tage of reduced harmonics in the output phase voltage.

Nachhaltige Energie für ländliche Entwicklung in dem Sub-Sahara Afrika: interdisziplinäre Herangehensweise und organisatorische Herausforderung

Angesichts der Geschichte der Entwicklungspolitik, ist diese Arbeit darauf ausgerichtet, einige Beobachtungen in Bezug auf die so genannte Entwicklung hervorzuheben; insbesondere auf die andauernde prekäre Situation und Armut in ländlichen afrikanischen Gebieten. Armut ist nach Amartya SEN – weiter präzisiert von J.L. Dubois – die Deprivation von „Fähigkeiten“, die Individuen und lokale Gemeinschaften zu ausgeschlossenen und vergessenen Akteuren des Systems machen. Das nennt Paulo Freire, das Menschen zu „Objekten“ gemacht werden. Es rechtfertigt die starke Annahme, die in dieser Studie getroffen wird, dass vielmehr die Menschen als „Subjekte“ ihrer Veränderung und Entwicklung im Mittelpunkt stehen. Die Arbeit zeigt und erklärt in historischer Chronologie, wie die Entwicklungspolitiken und unterschiedliche Beteiligte auf allen Ebenen diese Situation verursachen. Trotz alledem bleiben die Individuen und lokalen Gemeinschaften, die in Symbiose mit ihrer natürlichen Umwelt leben, die reich an verschiedenen Ressourcen und Potentialen ist, als Reaktion darauf und gleichzeitig als Überlebensstrategie zutiefst verbunden mit dem, was sie vor Ort haben, womit sie eine tiefere und intensive Beziehung besitzen, wenn man von ihrer Geschichte, ihrer Kultur und der Handlungslogik ausgeht. Für externe Akteure, die sie über das vorhandene System dominieren und beeinflussen bleiben sie „Objekte“, aber in der Vielzahl ihrer endogenen Initiativen, zeigen sie die Fähigkeit und Substanz, die beweisen, dass sie auf ihrer Ebene das eigentliche Subjekt sind, die dynamischen Akteure. Aber isolierte Initiativen auf spezifische reale Bedürfnisse bei gleichzeitiger Dominierung durch das System mit seiner Marktlogik, führt dies langfristig nur zu dem Zirkulus Vitiosus der Armut. Daher ist eine ganzheitliche Sicht entscheidend für nachhaltige Entwicklung und für die notwendige Veränderung. Es geht nicht nur um die Veränderung des Systems und die Wahl politischer Maßnahmen, sondern genau genommen um das Verhalten der Akteure auf allen Ebenen und die Art der Beziehungen zwischen ihnen allen. Es ist eine Frage des erneuten Überdenkens des Entwicklungspfades, der andere Logik, Visionen, Interessen und Strategien aller Beteiligten, unserer so genannten Akteure einschließt. Ob dies von endogenen Initiativen oder neuen gemeinsamen Projekten ausgeht: man wird in einen Prozess kollektiven Lernens eintreten, den Paul Singer und Clarita Müller-Plantenberg erläutern und entwickeln in dem Konzept der Inkubation und Solidarischen Ökonomie, die Eigeninitiative, Selbstbestimmung und Selbstverwaltung von lokalen Gemeinschaften und die Öffnung für eine Neu-Konzeptualisierung und Institutionalisierung einschließt. So ein Prozess ist nur mit einem interdisziplinären Rahmen möglich. Dieser Rahmen soll auf einer zusätzlicher Kommunikation zwischen den Akteuren und Sozialwissenschaften beruhen und mit jenen, die auf dem Feld der Technologie arbeiten. So können dann technische „Experten“ angesichts eines technischen Projektfehlers, der aufgrund von bestimmten sozialen und kulturellen Realitäten zustande kam sagen, „es ist kein Scheitern ; es war ein Schritt innerhalb eines Lernprozesse der in die technischen Projekte und Studien einbezogen werden muss“. Wir haben das Energiethema gewählt; und insbesondere, Energie für eine nachhaltige ländliche Entwicklung in Subsahara-Afrika, um den Weg von der Theorie in die Praxis zu illustrieren und experimentell auszuprobieren, den Weg von den Beobachtungen zu der Veränderung, wobei Fragen, Annahmen, Strategien und konkrete Aktionen für den Wandel behandelt werden. Wir nennen unseren experimentellen Weg: DRIEE, das heißt auf Deutsch Ländliche Entwicklung und Inkubation von Energieunternehmen. Dabei gehen wir davon aus, dass: - Energie im Allgemeinen auf der internationalen Ebene fast gleichbedeutend mit Elektrizität ist. Heute bestehen die wichtigsten Bedürfnisse nach Energie dort wo die agro-pastorale Produktion, das Kochen, die Nahrungsmittelkonservierung und Verarbeitung …etc. stattfindet. - Diese ländliche Bevölkerung zu etwa 80% der nationalen Wirtschaft ausmacht. Dass sie gleichzeitig aber nur zu weniger als 5% der Energieproduktion Zugang hat, was oft auf Licht reduziert ist und nicht einmal ihrer Produktion zugute kommen kann. - Die Projekte für Energie und Elektrizität vor allem auf die Technologischen Fragen konzentriert sind und weniger auf die Bedürfnisse. Fast die Gesamtheit der Fonds für Energie wird in Bezug auf die Investitionen Infrastruktur der Produktion und Verteilung durch die konventionellen zentralisierten Netze geplant. Angesichts dieser Analysen gehen die in dieser Arbeit vorgenommenen Studien in Gambia und Kamerun von Bestandsaufnahmen und / oder beschreibenden regionalen Analysen aus: - von Bedürfnissen, von Praktiken und lokalen Initiativen von Fragen der Energie, für einzelne Professionen, Haushalte, Gruppen, spezifische Gruppen, wie Frauen, ländliche Gemeinden mit ihren spezifischen Charakteristika. - Von Potentialen: natürliche lokale Energieressourcen, soziokulturelle Ressourcen – so z.B. die empirisch feststellbaren menschliche Ressourcen wie endogenes Wissen und praktische organisatorische Fähigkeiten gegenüber den Problemen der Energie. Dieser experimentelle Schritt von Handlungsforschung (DRIEE) in Kamerun führte zu der Gründung einer Organisation, über die und mit der wir die Logik der Inkubation und Solidarischen Ökonomie einführen. Das ist FERDEDSI, das heißt auf Deutsch „Forum für Erneuerbare Energie – Nachhaltige Entwicklung und Internationale Solidarität“. Zunächst war dies eine Energiegenossenschaft und dann (im Prozess) wurde es zu einer institutionellen Nische von mehreren Mikro Initiativen in ländlichen Gebieten. FERDEDSI ist ein Prozess der Inkubation und ein Inkubator ist also gleichzeitig ein inkubiertes Energieunternehmen aber auch ein Inkubator für lokale Organisationen. Die ersten Aktionen finden in den Departments von Noun und Ménoua in der westlichen Provinz von Kamerun statt. Während der Forschungsperiode findet akademische Austausch statt (Nord-Süd und Süd-Süd), diese ist dabei zu formalen Partnerschaften zu werden, nicht nur zwischen Universitäten sondern genauer lokale Organisationen und Universitäten. Dieser letzte Typ von Partnerschaften, die die solidarische Ökonomie ausmachen ist auch eine Innovation des Prozesses für die afrikanischen Fälle, die dem Beispiel dessen, was in Lateinamerika geschieht, folgen. So kommt es zu gegenseitiger sinnvoller Ausbildung in den internationalen Arbeitsgruppen und Seminaren der Universität.

Equality of educational opportunity employing Pisa data: taking both achievement and access into account

La medición de la desigualdad de oportunidades con las bases de PISA implican varias limitaciones: (i) la muestra sólo representa una fracción limitada de las cohortes de jóvenes de 15 años en los países en desarrollo y (ii) estas fracciones no son uniformes entre países ni entre periodos. Lo anterior genera dudas sobre la confiabilidad de estas mediciones cuando se usan para comparaciones internacionales: mayor equidad puede ser resultado de una muestra más restringida y más homogénea. A diferencia de enfoques previos basados en reconstrucción de las muestras, el enfoque del documento consiste en proveer un índice bidimensional que incluye logro y acceso como dimensiones del índice. Se utilizan varios métodos de agregación y se observan cambios considerables en los rankings de (in) equidad de oportunidades cuando solo se observa el logro y cuando se observan ambas dimensiones en las pruebas de PISA 2006/2009. Finalmente se propone una generalización del enfoque permitiendo otras dimensiones adicionales y otros pesos utilizados en la agregación.

La construcción narrativa de la identidad en un contexto educativo intercultural = The narrative construction of identity in a intercultural educative setting

En este trabajo se expone e ilustra un modelo teórico para entender las funciones de la identidad, así como los mecanismos psicosociales asociados a su construcción: “Modelo Evolutivo y Funcional de la Identidad Mediada” (MEBIM). La identidad, mediada narrativamente, cumple una función personal orientada a la dirección de la propia vida, así como una función sociocultural vinculada a la búsqueda de reconocimiento de los derechos de los grupos sociales a los que uno se siente apegado. Se ilustran los factores asociados a la construcción de la identidad personal (sí mismos posibles, transiciones vitales, vínculo afectivo) y sociocultural (acción-transformación e identificación simbólica) a partir de 12 historias de vida realizadas con mestizos e indígenas de la Universidad Intercultural de Chiapas (México). Se sugiere que en contextos educativos formales, como la escuela o la Universidad, se deben propiciar narrativas personales y socioculturales con el objetivo de optimizar la identidad en un mundo a la vez globalizado y plural