Vibration reduction for vision systems on board unmanned aerial vehicles using a neuro-fuzzy controller

In this paper, an intelligent control approach based on neuro-fuzzy systems performance is presented, with the objective of counteracting the vibrations that affect the low-cost vision platform onboard an unmanned aerial system of rotating nature. A scaled dynamical model of a helicopter is used to simulate vibrations on its fuselage. The impact of these vibrations on the low-cost vision system will be assessed and an intelligent control approach will be derived in order to reduce its detrimental influence. Different trials that consider a neuro-fuzzy approach as a fundamental part of an intelligent semi-active control strategy have been carried out. Satisfactory results have been achieved compared to those obtained by means of vibration reduction passive techniques.

A proposed bare-tether experiment on board a sounding rocket

A mission on board a sounding rocket to carry out two bare-tether experiments is proposed: a test of orbital-motion-limited (OML) collection and the proof-of-flight of a technique to determine the (neutral) density vertical profile in the critical E-layer. Since full bias from the motional field will be small (~ 20V), corresponding to a tape 1 km long and V rocket <8 km/s, a power source with a range of supply voltages of few kV would be used. First, the negative terminal of the supply would be connected to the tape, and the positive terminal to a round, conductive boom of length 10 - 20 m; electrons collected by the boom cross the supply into the tape, where they leak out at the rate of ion impact plus secondary emission. Determination of the density profile from measurements of auroral emissions observed from the rocket, as secondaries racing down the magnetic field reach an E-layer footprint, are discussed. Next the positive terminal of the voltage supply is connected to the tape, and the negative terminal to a Hollow Cathode (HC); electrons now collected by the tape cross the supply, and are ejected at the HC. The opposite connections, with current collection operated by tape and boom, and operating on electrons and ions, and through partial switching in the supply, allow testing OML collection in almost all respects it depends on.

Efficient hybrid monocular-stereo approach to on-board, video-based traffic sign detection and tracking

In this paper we propose an innovative method for the automatic detection and tracking of road traffic signs using an onboard stereo camera. It involves a combination of monocular and stereo analysis strategies to increase the reliability of the detections such that it can boost the performance of any traffic sign recognition scheme. Firstly, an adaptive color and appearance based detection is applied at single camera level to generate a set of traffic sign hypotheses. In turn, stereo information allows for sparse 3D reconstruction of potential traffic signs through a SURF-based matching strategy. Namely, the plane that best fits the cloud of 3D points traced back from feature matches is estimated using a RANSAC based approach to improve robustness to outliers. Temporal consistency of the 3D information is ensured through a Kalman-based tracking stage. This also allows for the generation of a predicted 3D traffic sign model, which is in turn used to enhance the previously mentioned color-based detector through a feedback loop, thus improving detection accuracy. The proposed solution has been tested with real sequences under several illumination conditions and in both urban areas and highways, achieving very high detection rates in challenging environments, including rapid motion and significant perspective distortion

Can seed production and restricted dispersal limit recruitment in Pinus pinaster Aiton from the Spanish Northern Plateau?

Natural regeneration faces increasing difficulties in dry forests from the Mediterranean basin, including for normally well-regenerating species such as maritime pine (Pinus pinaster Aiton). In this paper, we studied female fertility, seed dispersal and spread rates in P. pinaster from the Spanish Northern Plateau, where natural regeneration failure is a main concern for forest managers. For this purpose we periodically collected data from seed traps and trees located at two core locations across several years. We found significant variation in interannual cone production, with the best seed trees being the same across years. In addition, we found highly skewed distributions of female reproductive effort and large fertility differences across stands located few kilometres away. Annual seed dispersal kernels fitted lognormal or 2Dt models depending on the stand analysed, with median dispersal distances between 14 and 25 m. Kernels fitted for maximum dispersal periods showed an outstanding intraseasonal variation of median dispersal distances, from 10 to 54 m, in association to variable patterns of rainfall and maximum wind speed. The amount of seed produced appeared to be enough to guarantee the natural regeneration of the stands during the typical 20-year regeneration period. Colonisation simulations concluded that Mediterranean maritime pine has a notable dispersion capacity, which is strongly influenced by levels of fecundity and, especially, by the number and frequency of long-distance dispersal events. The latter play a key role in tree dispersion processes through enlarging the occupied area and fostering the invasion of abandoned crop land.

Experience in spacecraft on-board software development

This paper describes some important aspects of high- integrity software development based on the authors' work. Current group research is oriented towards mixed- criticality partitioned systems, development tools, real- time kernels, and language features. The UPMSat-2 satellite software is being used as technology demonstra- tor and a case study for the assessment of the research results. The flight software that will run on the satellite is based on proven technology, such as GNAT/ORK+ and LEON3. There is an experimental version that is being built using a partitioned approach, aiming at assessing a toolset targeting partitioned multi-core em- bedded systems. The singularities of both approaches are discussed, as well as some of the tools that are being used for developing the software.

Histograms of oriented gradients for fast on-board vehicle verification

Histograms of Oriented Gradients (HoGs) provide excellent results in object detection and verification. However, their demanding processing requirements bound their applicability in some critical real-time scenarios, such as for video-based on-board vehicle detection systems. In this work, an efficient HOG configuration for pose-based on-board vehicle verification is proposed, which alleviates both the processing requirements and required feature vector length without reducing classification performance. The impact on classification of some critical configuration and processing parameters is in depth analyzed to propose a baseline efficient descriptor. Based on the analysis of its cells contribution to classification, new view-dependent cell-configuration patterns are proposed, resulting in reduced descriptors which provide an excellent balance between performance and computational requirements, rendering higher verification rates than other works in the literature.

Toward Visual Autonomous Ship Board Landing of a VTOL UAV

In this paper we tackle the problem of landing a helicopter autonomously on a ship deck, using as the main sensor, an on-board colour camera. To create a test-bed, we first adequately simulate the movement of a ship landing platform on the Sea, for different Sea States, for different ships, randomly and realistically enough. We use a commercial parallel robot to get this movement. Once we had this, we developed an accurate and robust computer vision system to measure the pose of the helipad with respect to the on-board camera. To deal with the noise and the possible fails of the computer vision, a state estimator was created. With all of this, we are now able to develop and test a controller that closes the loop and finish the autonomous landing task.

The experiment CPLM (comportamiento de puentes líquidos en microgravedad) on board Minisat 01

The Universidad Politécnica de Madrid participates in the MINISAT 01 program as the experiment CPLM responsible. This experiment aims at the study of the fluid behaviour in reduced gravity conditions. The interest of this study is and has been widely recognised by the scientific community and has potential applications in the pharmaceutical and microelectronic technologies (crystal growth), among others. The scientific team which has developed the CPLM experiment has a wide experience in this field and had participate in the performance of a large number of experiments on the fluid behaviour in reduced gravity conditions in flight (Spacelab missions, TEXUS sounding rockets, KC-135 and Caravelle aeroplanes, drop towers, as well as on earth labs (neutralbuoyancy and small scale simulations). The experimental equipment used in CPLMis a version of the payload developed for experimentation on drop towers and on board microsatellites as the UPM-Sat 1, adapted to fly on board MINISAT 01.

Annual report of the Secretary of the State Board of Agriculture of the State of Michigan ...

25

Annual report of the Secretary of the Connecticut Board of Agriculture.

v.5 (1871-1872)

Annual report of the Secretary of the Connecticut Board of Agriculture.

v.39 (1905)

Annual report of the Secretary of the State Board of Agriculture of the State of Michigan ...

45

Annual report of the Secretary of the State Board of Agriculture of the State of Michigan ...

41