Can Heat Treatment Procedures of Pre-hydrolyzed Silane Replace Hydrofluoric Acid in the Adhesion of Resin Cement to Feldspathic Ceramic?

Purpose: To evaluate the influence of heat treatment (HT) procedures of a pre-hydrolyzed silane on bond strength of resin cement to a feldspathic ceramic.Materials and Methods: Ceramic and composite blocks (N = 30) were divided into six groups (n = 5) and subjected to the following conditioning procedures: G1: 9.6% hydrofluoric acid (HF) for 20 s + silane (RelyX Ceramic Primer, 3M ESPE) + resin cement (Panavia F2.0, Kuraray) (control); G2: HF (20 s) + silane + heat treatment in furnace (HTF) (100 degrees C, 2 min) + resin cement; G3: silane + HTF + resin cement; G4-HF (20 s) + silane + heat treatment with hot air (HTA) (50 +/- 5 degrees C for 1 min) + resin cement; G5: silane + HTA + resin cement; G6: silane + resin cement. The microtensile bond strength (MTBS) test was performed using a universal testing machine (1 mm/min). After debonding, the substrate and adherent surfaces were analyzed using a stereomicroscope and SEM to categorize the failure types. The data were statistically evaluated using one-way ANOVA and Tukey's test (5%).Results: The control group (G1) showed no pre-test failures and presented significantly higher mean MTBS (16.01 +/- 1.12 MPa) than did other groups (2.63 +/- 1.05 to 12.55 +/- 1.52 MPa) (p = 0.0001). In the groups where HF was not used, HTF (G3: 12.55 +/- 1.52 MPa) showed significantly higher MTBS than did HTA (G5: 2.63 +/- 1.05 MPa) (p < 0.05). All failure types were mixed, ie, adhesive between the resin cement and ceramic accompanied by cohesive failure in the cement.Conclusion: Heat treatment procedures for the pre-hydrolyzed silane either in a furnace or with the application of hot air cannot replace the use of HF gel for the adhesion of resin cement to feldspathic ceramic. Yet when mean bond strengths and incidence of pre-test failures are considered, furnace heat treatment delivered the second best results after the control group, being considerably better than hot air application.

Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

Objectives: This study evaluated the influence of air-particle abrasion protocols on the surface roughness (SR) of zirconia and the shear bond strength (SBS) of dual-polymerized resin cement to this ceramic. Materials and methods. Sintered zirconia blocks (n = 115) (Lava, 3M ESPE) were embedded in acrylic resin and polished. The specimens were divided according to the 'particle type' (Al: 110 mu m Al2O3; Si: 110 mu m SiO2) and 'pressure' factors (2.5 or 3.5 bar) (n = 3 per group): (a) Control (no air-abrasion); (b) Al2.5; (c) Si2.5; (d) Al3.5; (e) Si3.5. SR (Ra) was measured 3-times from each specimen after 20 s of air-abrasion (distance: 10 mm) using a digital optical profilometer. Surface topography was evaluated under SEM analyses. For the SBS test, 'particle type', 'pressure' and 'thermocycling' (TC) factors were considered (n = 10; n = 10 per group): Control (no air-abrasion); Al2.5; Si2.5; Al3.5; Si3.5; Control(TC); Al2.5(TC); Si2.5(TC); Al3.5(TC); Si3.5(TC). After silane application, resin cement (Panavia F2.0) was bonded and polymerized. Specimens were thermocycled (6.000 cycles, 5-55 degrees C) and subjected to SBS (1 mm/min). Data were analyzed using ANOVA, Tukey's and Dunnett tests (5%). Results. 'Particle' (p = 0.0001) and 'pressure' (p = 0.0001) factors significantly affected the SR. All protocols significantly increased the SR (Al2.5: 0.45 +/- 0.02; Si2.5: 0.39 +/- 0.01; Al3.5: 0.80 +/- 0.01; Si3.5: 0.64 +/- 0.01 mu m) compared to the control group (0.16 +/- 0.01 mu m). For SBS, only 'particle' factor significantly affected the results (p = 0.015). The SiO2 groups presented significantly higher SBS results than Al2O3 (Al2.5: 4.78 +/- 1.86; Si2.5: 7.17 +/- 2.62; Al3.5: 4.97 +/- 3.74; Si3.5: 9.14 +/- 4.09 MPa) and the control group (3.67 +/- 3.0 MPa). All TC specimens presented spontaneous debondings. SEM analysis showed that Al2O3 created damage in zirconia in the form of grooves, different from those observed with SiO2 groups. Conclusions. Air-abrasion with 110 mu m Al2O3 resulted in higher roughness, but air-abrasion protocols with SiO2 promoted better adhesion.

Frações oxidáveis do carbono orgânico total e macrofauna edáfica em sistema de integração lavoura-pecuária

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of potassium sources and rates on arabica coffee yield, nutrition, and macronutrient export

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação entre medidas acústicas de vogais em provas de repetição e conversa espontânea

The aim of this study is to compare acoustic measures (frequency, duration and intensity) of the vowels /i, a, u/ in repetition and spontaneous tasks. Recordings of words produced by ten children with typical language development in both controlled and spontaneous tasks were selected from a database. The vowels were selected and edited into individual files in the software PRAAT. Acoustic measures related to formant frequency (F1 and F2), intensity and duration of vowels in both contexts were extracted. The values obtained were compared by means of T Tests. In general, the acoustic analysis showed no differences between the two contexts of speech production. The few differences found can be explained by the presence of focus and/or hesitation phenomena during the speech productions. It is possible to use data from spontaneous context to analyze the vowels acoustically, provided that both the phonetic context of the vowel occurrence and the syllable stress of the vocalic segment are considered.

Evolução do temperamento de bovinos de corte mantidos a pasto e frequentemente manejados

Pós-graduação em Zootecnia - FCAV

Aspectos da dinâmica, seleção e maturação folicular em éguas pônei

O presente trabalho envolveu três experimentos: Influência da imunização passiva contra estradiol (E2) e a aspiração do maior folículo (F1) no momento do desvio folicular esperado, sobre a ocorrência do desvio folicular observado. Também foi objetivo verificar o efeito desses tratamentos sobre o perfil de hormônio folículo estimulante (FSH), hormônio luteinizante (LH) e inibina total circulante. Para tanto, os animais foram imunizados com dose única de soro anti-E2 (G anti-E2) ou o F1 foi aspirado no momento do desvio esperado (GAF1). O plasma sangüíneo foi obtido no período pré e póstratamento. O intervalo entre o dia da aplicação do soro (desvio esperado) e o dia da detecção do desvio foi em média o mesmo para o G anti-E2 e controle. No GAF1, a eliminação do maior folículo provocou atraso no momento da detecção do desvio folicular entre o segundo (F2) e o terceiro (F3) maior folículo, comparado ao controle. Em ambos os tratamentos o perfil de FSH, LH e inibina total foi similar ao controle. O experimento 2 tratou de um projeto piloto visando dominar a técnica de colheita de fluido dos grandes folículos ovarianos por meio de punção com agulha fina e o efeito desse procedimento sobre o folículo e às concentrações hormonais. Foram utilizados dois grupos de animais, G1 o folículo foi mantido intacto (controle) e G2 foi utilizada uma punção folicular quando o maior folículo atingiu diâmetro ~35 mm. Ultrasonografia ovariana foi realizada desde o ínicio da detecção de um folículo ~25mm, seguindo até a detecção da ovulação. O terceiro experimento objetivou verificar a influência de gonadotrofina coriônica humana (hCG) em folículos de 30 ou 35mm sobre as concentrações de hormônios esteróides e fatores intrafoliculares. A colheita do fluido folicular foi realizada imediatamente antes e 30 horas após a aplicação... (Resumo completo, clicar acesso eletrônico abaixo)

Organic acids and protein compounds causing the photoluminescence properties of natural rubber membranes and the quenching phenomena from Au nanoparticle incorporation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cytogenetic and morphologic approaches of hybrids from experimental crosses between Triatoma lenti Sherlock & Serafim, 1967 and T. sherlocki Papa et al., 2002 (Hemiptera: Reduviidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Protonation Pattern, Tautomerism, Conformerism, and Physicochemical Analysis in New Crystal Forms of the Antibiotic Doxycycline

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Single nucleotide polymorphisms in candidate genes associated with gastrointestinal nematode infection in goats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The physiology and impact on fertility of the period of proestrus in lactating dairy cows

In cattle, proestrus begins with the initiation of luteolysis and ends with initiation of estrus and the GnRH/LH surge. This period is marked by a dramatic decrease in circulating progesterone (P4) that reaches a nadir by about 36-48 h in cows undergoing natural or prostaglandin F2 alpha (PGF)-induced luteolysis. Inadequate luteolysis is a cause of reduced fertility particularly in timed AI programs with small elevations in circulating P4 reducing fertility. Increasing circulating estradiol (E2) during proestrus is dependent on presence, size, and function of the dominant follicle and this varies during natural proestrus, due to whether animals have two or three follicular waves, and during PGF-induced proestrus, according to stage of the follicular wave at time of PGF treatment. Inadequate circulating E2 can limit fertility and increase pregnancy loss in some specific circumstances such as in cows with low BCS and in cows during heat stress. Thus, studies to optimize the length of proestrus and the concentrations of E2 and P4 during proestrus could produce substantial improvements in fertility and reductions in pregnancy loss.

Abordagem multivariada na análise de diversidade genética em cruzamentos para alto teor de óleo em soja

The soybean crop is considered a high expression around the world. In plant breeding programs, knowledge of genetic diversity is extremely important and in this context, are frequently used multivariate analyzes. Thus, the aim of the present study was to evaluate the genetic divergence between soybean crosses through multivariate techniques. In total, 16 crosses were evaluated, which were in the F2 generation of inbreeding. The evaluated characteristics were plant height at maturity, height of the first pod, number of branches per plant, number of pods per plant, number of nodes per plant, hundred seed weight, grain yield and oil content. For the analyzes was used Euclidean distance, methods of hierarchical clustering UPGMA and Ward and principal component analysis. Genetic distances estimated using Euclidean distance ranged from 1.24 to 8.13, with the smallest distance observed between crosses C1 and C4, and the greatest distance between the C2 crosses and C6. The methods UPGMA clustering and Ward met crossings in five different groups. The principal component analysis explained 86.2% of the variance contained in the original eight variables with three main components. The APM characters, NV, NR, NN, PG% and oil were the main contributors to genetic divergence among traits. Multivariate techniques were crucial to the analysis of genetic diversity, and the methods of Ward and UPGMA clustering and principal components have consistent results in this way, the simultaneous use of these tools in genetic analysis of crosses is indicated

Desenvolvimento e caracterização de microemulsões contendo fluconazol para o tratamento da Leishmaniose tegumentar

A leishmaniose tegumentar é causada pela picada da fêmea dos insetos flebotomíneos. As lesões podem evoluir de pápulas para úlceras, que apresentam fundo granuloso e bordas infiltradas, as quais são indolores, podendo ser únicas ou múltiplas. Trata-se de uma doença negligenciada e o investimento em seu tratamento é desprezível. Até hoje, são empregados no tratamento medicamentos a base de antimonial pentavalente, além de outros fármacos como pentamidina, anfotericina B, paromomicina, imidazoquinolina, antifúngicos, como o fluconazol (FLU). As microemulsões (MEs) melhorarem a solubilidade e estabilidade dos fármacos, além de proporcionarem ação prolongada, vetorização diferenciada para determinados tecidos ou órgãos do organismo. Este trabalho teve como objetivos desenvolver e caracterizar MEs contendo FLU, caracterizar estruturalmente por meio de análises de microscopia de luz polarizada, análise do tamanho das gotículas, análise do perfil de textura e avaliação da bioadesão. Para o estudo de estabilidade foram empregados ensaios de avaliação visual e determinação do pH. Quanto aos ensaios biológicos in vitro, foram realizados ensaios colorimétricos das amostras visando verificar se o sistema desenvolvido permite a potencialização do poder leishmanicida do FLU contra as formas promastigotas da Leishmania amazonensis. Pelo diagrama de fases observou fases líquido-cristalinas confirmadas pela microscopia de luz polarizada, e foram selecionadas três formulações: uma SLT e duas SVT. Todos os ensaios de caracterização estrutural para a F2 sofreu variação quando acrescentou o fármaco, exceto para o potencial zeta, difração de raios X e bioadesão. Não houve alteração no ensaio estabilidade físico-química no período analisado. Os ensaios biológicos in vitro evidenciaram, nas condições metodológicas, inefetividade do sistema contra as formas promastigotas de L. amazonensis

Consultas de enfermagem com pacientes em tratamento para hepatite C

Infection with hepatitis C virus (HCV) is a worldwide problem of public health and who estimates 2.5% to 4.9% of infection by this virus among the population. This means that there are 3.9 to 7.6 million people at risk of developing cirrhosis or liver cancer. In Brazil, 20% to 58% of patients with chronic liver disease have antibodies to HCV (anti-HCV). To characterize the profile of patients undergoing treatment for hepatitis C in the Ambulatory General HC-FMB/UNESP, identify aspects of the disease and the phases of nursing process addressed during consultation. Transverse and descriptive study involving 38 patients undergoing treatment for Hepatitis C in Ambulatory General Area (Viral Hepatitis) in the period from July to September 2010. The population consisted of 38 patients, most of the males with completed higher education level, Catholic, married and aged predominantly between 41 and 60 years. Among the drugs used, we find the use of antihypertensive, antidepressant / anxiolytic and antidiabetic / hypoglycemic. With respect to specific medications used to treat hepatitis C, we found the use mainly of alfapeguinterferona 2b + ribavirin. The drugs used were complementary erythropoietin and filgastrim. There was a predominance of fibrosis 2 (F2) and genotype 1 (G1). Regarding the means of contamination, it was stressed blood transfusion and injection drug use. The most frequent drug reactions were decreased appetite, weight loss and discouragement. : The Nursing Process is considered a valuable tool in caring for patients with hepatitis C, because it works as identifying aspects of lifestyle, needs and potential of these patients and allows the deployment of humanized care strategies aimed at reduction of health hazards and improving the quality of life of these patients