1000 resultados para Bactéria promotora de crescimento
Resumo:
RESUMO O objetivo do trabalho foi avaliar o ajuste dos modelos Gompertz e Logístico, com estrutura de erros independentes e autoregressivos, no desenvolvimento de frutos de caju, com base em medidas de comprimento e largura do fruto, tomados ao longo do tempo. A estimação dos parâmetros foi feita por meio de rotinas no software R, utilizando-se o método dos mínimos quadrados e o processo iterativo de Gauss- Newton. Os modelos foram comparados pelos critérios: coeficiente de determinação ajustado (R2 aj), desvio padrão residual (DPR), critério de informação Akaike (AIC) ecritériobayesiano de Schwarz (BIC). Para os dois modelos, os dados apresentaram autocorrelação residual positiva, tanto para a variável comprimento como para a largura do fruto, descrita por processo autoregressivo de primeiraordem. Em geral, por todos critérios de avaliação da qualidade de ajuste, os dados se ajustaram ao modelo Logístico com uma estrutura autoregressiva da primeira ordem, havendo no entanto superestimação do tamanhodo fruto nas últimas idades, tanto no crescimento em comprimento (cm) e largura (cm).
Resumo:
RESUMO O objetivo deste estudo foi avaliar o efeito de fungos micorrízicos arbusculares (FMAs), da adubação e da composição do substrato no crescimento de mudas de Eugenia uniflora. As sementes foram germinadas em vermiculita média e repicadas para tubetes (100 cm3) contendo substratos à base de vermicomposto e casca de arroz carbonizada e, como controle, utilizou-se do substrato comercial à base de casca de pínus. Estes substratos foram testados com e sem inoculação micorrízica, adicionada ao substrato, como também se testaram a presença e a ausência de adubação de cobertura. Foram analisadas as propriedades físico-químicas dos substratos formulados. Avaliaram-se a altura, o diâmetro do colo, a agregação das raízes ao substrato, a biomassa seca aérea, a biomassa seca radicial e foram determinados a relação entre altura e diâmetro do colo e o índice de qualidade de Dickson. A inoculação com FMAs não influenciou no crescimento das mudas, enquanto a interação entre substratos e adubação foi significativa para a maioria das variáveis. A ausência de resposta aos FMAs foi, provavelmente, devido às altas concentrações de fósforo nestes substratos. Concluiu-se que o substrato à base de vermicomposto e casca de arroz carbonizada, na proporção de 20/80, pode ser utilizado na produção de mudas desta espécie.
Resumo:
As estruturas responsáveis pelo crescimento do osso incluem a fise (também chamada placa de crescimento) e as epífises. Afecções que acometem pacientes com o esqueleto imaturo, ou seja, com a placa de crescimento ainda aberta, podem interferir no crescimento ósseo, resultando em complicações como parada do crescimento, encurtamento dos membros ou deformidades angulares. Condições traumáticas que resultam muitas vezes em fraturas epifisárias são a causa mais comum das lesões da placa de crescimento. A avaliação cuidadosa desses pacientes pelos métodos de diagnóstico por imagem atualmente disponíveis, sobretudo a radiografia, a tomografia computadorizada e a ressonância magnética, permite o reconhecimento precoce do comprometimento das estruturas relacionadas ao crescimento ósseo, além de tratamento adequado, diminuindo a possibilidade do desenvolvimento de tais complicações.
Resumo:
The catalytic dehydrogenation of ethylbenzene in presence of steam is the main commercial route to produce styrene. The industrial catalysts are potassium- and chromia-doped hematite which show low surface areas leading to bad performance and short life. In order to develop catalysts with high areas, the effect of beryllium on the textural properties and on the catalytic performance of this iron oxide was studied. The influence of the amount of the dopant, the starting material and the calcination temperature were also studied. In sample preparations, iron and beryllium salts (nitrate or sulfate) were hydrolyzed with ammonia and then calcinated. The experiments followed a factorial design with two variables in two levels (Fe/Be= 3 and 7; calcination temperature= 500 and 700ºC). Solids without any dopant were also prepared. Samples were characterized by elemental analysis, infrared spectroscopy, surface area and porosity measurements, X-ray diffraction, DSC and TG. The catalysts were tested in a microreactor at 524ºC and 1 atm, by using a mole ratio of steam/ ethylbenzene=10. The selectivity was measured by monitoring styrene, benzene and toluene formation. It was found that the effect of beryllium on the characteristics of hematite and on its catalytic performance depends on the starting material and on the amount of dopant. Surface areas increased due to the dopant as well as the nature of the precursor; samples produced by beryllium sulfate showed higher areas. Beryllium-doped solids showed a higher catalytic activity when compared to pure hematite, but no significant influence of the anion of starting material was noted. It can be concluded that beryllium acts as both textural and structural promoter. Samples with Fe/Be= 3, heated at 500ºC, lead to the highest conversion and were the most selective. However, catalysts prepared from beryllium sulfate are the most promising to ethylbenzene dehydrogenation due to their high surface area which could lead to a longer life.
Resumo:
This paper describes in detail a technique employed to grow quasi-spherical single crystals of noble metals for electrochemical applications, using platinum as an example. The metal beads were formed by melting the extremity of a wire in an oxygen / butane flame. X-ray techniques were used to check the crystallization and to determine the orientation of the crystals. Treatment with a pure hydrogen flame followed by a cooling procedure in a hydrogen / argon atmosphere were used for conditioning the well-defined platinum single crystal surfaces. Finally, electrochemical characterization of the Pt(111), Pt(110) and Pt(100) surfaces was done in diluted sulfuric acid solution in the hydrogen adsorption / desorption potential region.
Resumo:
This text describes the development of Electrochemistry and Electroanalytical Chemistry in Brazil from the pioneers at the IQ/USP in the 70's to the present day status. It explains how the members of the scientific community organized themselves before the establishment in 1993 of a specific division within the Brazilian Chemical Society (SBQ) through bi-ennial meetings (Brazilian Symposium of Electrochemistry and Electroanalytical Chemistry - SIBEE). Those SIBEE meetings, in a present number of 12, are described individually giving some emphasis on their organizers, the invited speakers and the statistics and overall structure of the event. The activities of the Electrochemistry and Electroanalytical Chemistry Division of the SBQ from 1993 are also briefly discussed as well as some considerations are made on the present and future of these fields.
Resumo:
The objectives of this work are to supply a basic background on nanostructured materials and also to report about the obtaining of nanoparticles, mainly, tin dioxide nanocrystalline particles (obtained by using the polymeric precursor method) presenting a high stability against particle growth due to the usage of a metastable solid solution. The synthesis and growth of SnO2 nanoribbons by a carbothermal reduction process are also discussed.
Resumo:
Ethylbenzene dehydrogenation in the presence of steam is the main commercial route to produce styrene. The industrial catalyst is chromium and potassium-doped hematite, which easily deactivates with time due to potassium loss. In order to find non-toxic and potassium free catalysts, the promoter action of zinc on hematite was studied in this work. It was found that zinc acts as structural promoter by stabilizing the Fe3+ species (active phase) as maghemite. Although it decreases the specific surface area, it increases four times the catalytic activity as compared to hematite.
Resumo:
The present work describes the use of piperonal, a derivative of the secondary metabolite safrole, for the synthesis of new 5,6-methylenedioxysubstituted indole carboxylic acids structurally related to the indol-3-yl-acetic acid (AIA, I). The route comprises six steps beginning with piperonal with an overall yield of 19%. Compound IX was tested towards its plant growth regulator properties in bioassays specific for auxine activity. The in vitro assays were performed in a germination chamber and were of two types: root growth in germinated seeds of Lactuca sativa, Cucumbis sativus and Raphanus sativus and peciole biotest using Phaseolus vulgaris.
Resumo:
Quimica Nova and the Journal of the Brazilian Chemical Society are two examples of successful initiatives taken by the Brazilian Chemical Society (SBQ - Sociedade Brasileira de Química), and may serve as models for the scientific societies of developing countries. Pillars of the SBQ, these two periodicals are undeniable demonstrations that idealism, utopia and dignity are the essential ingredients for transforming dreams into reality. Few believed that the Brazilian chemical community would one day have, as it does today, two scientific research periodicals indexed in the principal international data banks.
Resumo:
Photosynthetic microorganism cultures, such as microalgae, represent one of the alternatives for fossil CO2 emissions mitigation. Carbon supply is the major cost component in microalgal cultures. Aiming to enhance the dissolved inorganic carbon uptake efficiency in microalgal cultures, Spirulina sp LEB-18 was cultivated in mediums containing NaHCO3 concentrations ranging from 2.8 to 100 g L-1. Results indicated that lower dissolved inorganic carbon concentratios (2.8 g L-1 NaHCO3) produce higher growth parameters (Xmax = 0.75 g L-1; Pmax = 0.145 g L-1 d-1; µmax = 0.254 d-1) and lower carbon losses (13.61%). At 50 g L-1 of NaHCO3 cell growth was inhibited and carbon losses reached 38.73%.
Resumo:
This work reports the growth of corundum crystals by the flux method. The main objective was the evaluation of versatility, effectiveness and real possibilities of the flux method to the synthesis and doping of monocrystals with impurities of particular interest. In this work the chosen impurities were i) Cr and ii) Fe and Ti, aiming the synthesis of rubies and sapphires, respectively. The crystals were grown by heating a mixture of Al2O3:Cr or Al2O3:Fe:Ti and flux (MoO3). The maximum crystal size obtained was 1.0 mm, all transparent, presenting well developed faces, bipiramidal hexagonal shape, and showing a typical red (ruby) and/or light blue (sapphire) color. EDX and XPD experiments were performed in order to characterize some of the synthesized crystals. All crystallized specimens presented the α-alumina atomic structure.
Resumo:
A new series of dialkylphosphorylhydrazones was synthesized through the condensation of aromatic aldehydes with different phosphorylhydrazines. All synthesized compounds were characterized by IR, ¹H-NMR, 13C-NMR and 31P-NMR spectroscopies. The in vitro investigation of the activity of these compounds against Leishmania amazonensis promastigotes and epimastigotes of T. cruzi, showed an efficient inhibition of proliferation, at non toxic concentrations to mammalian cells. The results have shown some derivatives as potential antiparasitic agents against trypanosomatids.