Tools and methods for the quality assurance of force platforms in human movement analysis

The human movement analysis (HMA) aims to measure the abilities of a subject to stand or to walk. In the field of HMA, tests are daily performed in research laboratories, hospitals and clinics, aiming to diagnose a disease, distinguish between disease entities, monitor the progress of a treatment and predict the outcome of an intervention [Brand and Crowninshield, 1981; Brand, 1987; Baker, 2006]. To achieve these purposes, clinicians and researchers use measurement devices, like force platforms, stereophotogrammetric systems, accelerometers, baropodometric insoles, etc. This thesis focus on the force platform (FP) and in particular on the quality assessment of the FP data. The principal objective of our work was the design and the experimental validation of a portable system for the in situ calibration of FPs. The thesis is structured as follows: Chapter 1. Description of the physical principles used for the functioning of a FP: how these principles are used to create force transducers, such as strain gauges and piezoelectrics transducers. Then, description of the two category of FPs, three- and six-component, the signals acquisition (hardware structure), and the signals calibration. Finally, a brief description of the use of FPs in HMA, for balance or gait analysis. Chapter 2. Description of the inverse dynamics, the most common method used in the field of HMA. This method uses the signals measured by a FP to estimate kinetic quantities, such as joint forces and moments. The measures of these variables can not be taken directly, unless very invasive techniques; consequently these variables can only be estimated using indirect techniques, as the inverse dynamics. Finally, a brief description of the sources of error, present in the gait analysis. Chapter 3. State of the art in the FP calibration. The selected literature is divided in sections, each section describes: systems for the periodic control of the FP accuracy; systems for the error reduction in the FP signals; systems and procedures for the construction of a FP. In particular is detailed described a calibration system designed by our group, based on the theoretical method proposed by ?. This system was the “starting point” for the new system presented in this thesis. Chapter 4. Description of the new system, divided in its parts: 1) the algorithm; 2) the device; and 3) the calibration procedure, for the correct performing of the calibration process. The algorithm characteristics were optimized by a simulation approach, the results are here presented. In addiction, the different versions of the device are described. Chapter 5. Experimental validation of the new system, achieved by testing it on 4 commercial FPs. The effectiveness of the calibration was verified by measuring, before and after calibration, the accuracy of the FPs in measuring the center of pressure of an applied force. The new system can estimate local and global calibration matrices; by local and global calibration matrices, the non–linearity of the FPs was quantified and locally compensated. Further, a non–linear calibration is proposed. This calibration compensates the non– linear effect in the FP functioning, due to the bending of its upper plate. The experimental results are presented. Chapter 6. Influence of the FP calibration on the estimation of kinetic quantities, with the inverse dynamics approach. Chapter 7. The conclusions of this thesis are presented: need of a calibration of FPs and consequential enhancement in the kinetic data quality. Appendix: Calibration of the LC used in the presented system. Different calibration set–up of a 3D force transducer are presented, and is proposed the optimal set–up, with particular attention to the compensation of non–linearities. The optimal set–up is verified by experimental results.

A novel map-matching procedure for low-sampling GPS data with applications to traffic flow analysis

An extensive sample (2%) of private vehicles in Italy are equipped with a GPS device that periodically measures their position and dynamical state for insurance purposes. Having access to this type of data allows to develop theoretical and practical applications of great interest: the real-time reconstruction of traffic state in a certain region, the development of accurate models of vehicle dynamics, the study of the cognitive dynamics of drivers. In order for these applications to be possible, we first need to develop the ability to reconstruct the paths taken by vehicles on the road network from the raw GPS data. In fact, these data are affected by positioning errors and they are often very distanced from each other (~2 Km). For these reasons, the task of path identification is not straightforward. This thesis describes the approach we followed to reliably identify vehicle paths from this kind of low-sampling data. The problem of matching data with roads is solved with a bayesian approach of maximum likelihood. While the identification of the path taken between two consecutive GPS measures is performed with a specifically developed optimal routing algorithm, based on A* algorithm. The procedure was applied on an off-line urban data sample and proved to be robust and accurate. Future developments will extend the procedure to real-time execution and nation-wide coverage.

Bayesian space-time data fusion for real-time forecasting and map uncertainty

Environmental computer models are deterministic models devoted to predict several environmental phenomena such as air pollution or meteorological events. Numerical model output is given in terms of averages over grid cells, usually at high spatial and temporal resolution. However, these outputs are often biased with unknown calibration and not equipped with any information about the associated uncertainty. Conversely, data collected at monitoring stations is more accurate since they essentially provide the true levels. Due the leading role played by numerical models, it now important to compare model output with observations. Statistical methods developed to combine numerical model output and station data are usually referred to as data fusion. In this work, we first combine ozone monitoring data with ozone predictions from the Eta-CMAQ air quality model in order to forecast real-time current 8-hour average ozone level defined as the average of the previous four hours, current hour, and predictions for the next three hours. We propose a Bayesian downscaler model based on first differences with a flexible coefficient structure and an efficient computational strategy to fit model parameters. Model validation for the eastern United States shows consequential improvement of our fully inferential approach compared with the current real-time forecasting system. Furthermore, we consider the introduction of temperature data from a weather forecast model into the downscaler, showing improved real-time ozone predictions. Finally, we introduce a hierarchical model to obtain spatially varying uncertainty associated with numerical model output. We show how we can learn about such uncertainty through suitable stochastic data fusion modeling using some external validation data. We illustrate our Bayesian model by providing the uncertainty map associated with a temperature output over the northeastern United States.

Quality assessment of a landslide inventory map and its application to land‐use planning. A case study in the Northern Apennines (Emilia‐Romagna region, Italy)

Landslide hazard and risk are growing as a consequence of climate change and demographic pressure. Land‐use planning represents a powerful tool to manage this socio‐economic problem and build sustainable and landslide resilient communities. Landslide inventory maps are a cornerstone of land‐use planning and, consequently, their quality assessment represents a burning issue. This work aimed to define the quality parameters of a landslide inventory and assess its spatial and temporal accuracy with regard to its possible applications to land‐use planning. In this sense, I proceeded according to a two‐steps approach. An overall assessment of the accuracy of data geographic positioning was performed on four case study sites located in the Italian Northern Apennines. The quantification of the overall spatial and temporal accuracy, instead, focused on the Dorgola Valley (Province of Reggio Emilia). The assessment of spatial accuracy involved a comparison between remotely sensed and field survey data, as well as an innovative fuzzylike analysis of a multi‐temporal landslide inventory map. Conversely, long‐ and short‐term landslide temporal persistence was appraised over a period of 60 years with the aid of 18 remotely sensed image sets. These results were eventually compared with the current Territorial Plan for Provincial Coordination (PTCP) of the Province of Reggio Emilia. The outcome of this work suggested that geomorphologically detected and mapped landslides are a significant approximation of a more complex reality. In order to convey to the end‐users this intrinsic uncertainty, a new form of cartographic representation is needed. In this sense, a fuzzy raster landslide map may be an option. With regard to land‐use planning, landslide inventory maps, if appropriately updated, confirmed to be essential decision‐support tools. This research, however, proved that their spatial and temporal uncertainty discourages any direct use as zoning maps, especially when zoning itself is associated to statutory or advisory regulations.

A commutative higher cycle map into Deligne-Beilinson cohomology

Das Ziel dieser Arbeit ist die Konstruktion eines Homomorphismus von partiell definierten, graduiert-kommutativen Algebren, der nach Ubergang zu rationalen Kohomologiegruppen mit der Regulatorabbildung reg zwischen motivischer und Deligne-Beilinson Kohomologie übereinstimmt.rnZu Beginn der Arbeit werden verschiedene Komplexe beschrieben, mit denen sich die motivische und die Deligne-Beilinson Kohomologie berechnen lassen.rnIm ersten Kapitel wird der Komplex der höheren Chow Ketten und der Unterkomplex der "alternierenden" Ketten "in guter Lage" eingeführt, die beide die motivische Kohomologie berechnen (letzterer mit rationalen Koeffizienten).rnIn den folgenden beiden Kapiteln werden Komplexe C_D und P_D beschrieben, mit denen sich die (rationale) Deligne-Beilinson Kohomologie berechnen lässt. Diese sind aufgebaut aus sogenannten Strömen, die im zweiten Kapitel eingeführt werden. Verknüpft sind die beiden Komplexe durch eine Auswertungsabbildung ev, die für rationale Koeffizienten zu einem Quasi-Isomorphismus wird. Auf beiden Komplexen lassen sich (Schnitt-)Produkte definieren, von denen jedoch nur das Produkt auf P_D gleichzeitig assoziativ und graduiert-kommutativ ist.rnIm vierten Kapitel wird ganz allgemein für eine Familie von Komplexen, die einer Reihe an Anforderungen genügt, ein (partiell definierter) Homomorphismus (der Regulator) von dem Komplex der höheren Chow Ketten in eben diese Komplexe konstruiert. Die beiden oben genannten Komplexe erfüllen diese Anforderungen und liefern daher Regulatoren reg_C und reg_P

Mongodb tra i database non relazionali - focus su Map-Reduce e gestione della memoria

Panoramica delle caratteristiche dei database NoSQL, con dettaglio su MongoDB: filosofia di progettazione, modello dei dati, indicizzazione, algoritmo Map-Reduce e gestione della memoria.

Studio di Flow-Assurance e sensitivity analysis in sistemi di distribuzione di petrolio e gas naturale

Argomento del lavoro è stato lo studio di problemi legati alla Flow-Asurance. In particolare, si focalizza su due aspetti: i) una valutazione comparativa delle diverse equazioni di stato implementate nel simulatore multifase OLGA, per valutare quella che porta a risultati più conservativi; ii) l’analisi della formazione di idrati, all’interno di sistemi caratterizzati dalla presenza di gas ed acqua. Il primo argomento di studio nasce dal fatto che per garantire continuità del flusso è necessario conoscere il comportamento volumetrico del fluido all’interno delle pipelines. Per effettuare tali studi, la Flow-Assurance si basa sulle Equazioni di Stato cubiche. In particolare, sono state confrontate: -L’equazione di Soave-Redlich-Kwong; -L’equazione di Peng-Robinson; -L’equazione di Peng-Robinson modificata da Peneloux. Sono stati analizzati 4 fluidi idrocarburici (2 multifase, un olio e un gas) con diverse composizioni e diverse condizioni di fase. Le variabili considerate sono state pressione, temperatura, densità e viscosità; sono state poi valutate le perdite di carico, parametro fondamentale nello studio del trasporto di un fluido, valutando che l'equazione di Peng-Robinson è quella più adatta per caratterizzare termodinamicamente il fluido durante una fase di design, in quanto fornisce l'andamento più conservativo. Dopo aver accertato la presenza di idrati nei fluidi multifase, l’obiettivo del lavoro è stato analizzare come il sistema rispondesse all’aggiunta di inibitori chimici per uscire dalla regione termodinamica di stabilità dell’idrato. Gli inibitori utilizzati sono stati metanolo e mono-etilen-glicole in soluzione acquosa. L’analisi è stata effettuata confrontando due metodi: -Metodo analitico di Hammerschmidt; -Metodo iterativo con PVTSim. I risultati ottenuti hanno dimostrato che entrambi gli inibitori utilizzati risolvono il problema della formazione di idrato spostando la curva di stabilità al di fuori delle pressioni e temperature che si incontrano nella pipeline. Valutando le quantità da iniettare, il metodo di Hammerschmidt risulta quello più conservativo, indicando portate maggiori rispetto al PVTsim, soprattutto aggiungendo metanolo.

Metodi di map-matching per l'identificazione degli itinerari dei ciclisti

Negli ultimi anni si è assistito al considerevole aumento della disponibilità di dati GPS e della loro precisione, dovuto alla diffusione e all’evoluzione tecnologica di smartphone e di applicazioni di localizzazione. Il processo di map-matching consiste nell’integrare tali dati - solitamente una lista ordinata di punti, identificati tramite coordinate geografiche ricavate mediante un sistema di localizzazione, come il GPS - con le reti disponibili; nell’ambito dell’ingegneria dei trasporti, l’obiettivo è di identificare il percorso realmente scelto dall’utente per lo spostamento. Il presente lavoro si propone l’obiettivo di studiare alcune metodologie di map-matching per l’identificazione degli itinerari degli utenti, in particolare della mobilità ciclabile. Nel primo capitolo è esposto il funzionamento dei sistemi di posizionamento e in particolare del sistema GPS: ne sono discusse le caratteristiche, la suddivisione nei vari segmenti, gli errori di misurazione e la cartografia di riferimento. Nel secondo capitolo sono presentati i vari aspetti del procedimento di map-matching, le sue principali applicazioni e alcune possibili classificazioni degli algoritmi di map-matching sviluppati in letteratura. Nel terzo capitolo è esposto lo studio eseguito su diversi algoritmi di map-matching, che sono stati testati su un database di spostamenti di ciclisti nell’area urbana di Bologna, registrati tramite i loro smartphone sotto forma di punti GPS, e sulla relativa rete. Si analizzano altresì i risultati ottenuti in un secondo ambiente di testing, predisposto nell’area urbana di Catania, dove sono state registrate in modo analogo alcune tracce di prova, e utilizzata la relativa rete. La comparazione degli algoritmi è eseguita graficamente e attraverso degli indicatori. Vengono inoltre proposti e valutati due algoritmi che forniscono un aggiornamento di quelli analizzati, al fine di migliorarne le prestazioni in termini di accuratezza dei risultati e di costo computazionale.

Three-dimensional electroanatomic entrainment map in atypical atrial flutter late after heart transplantation

Atrial flutter in the donor part of orthotopic heart transplants has been reported and successfully treated by radiofrequency ablation of the cavotricuspid isthmus, but mapping and ablation of atypical flutter circuits may be challenging.(1) Entrainment mapping has been used in combination with activation mapping to define the mechanism of atypical atrial flutter. Here, we report a case where colour-coded three-dimensional (3D) entrainment mapping allowed us to accurately determine and visualize the 3D location of the reentrant circuit and to plan the ablation of a left atrial flutter without the need for activation mapping.