Estudo da detecção preventiva da osteoporose pela aplicação da variação da permissividade elétrica a partir da sondagem eletromagnética

This paper proposes a method based on the theory of electromagnetic waves reflected to evaluate the behavior of these waves and the level of attenuation caused in bone tissue. For this, it was proposed the construction of two antennas in microstrip structure with resonance frequency at 2.44 GHz The problem becomes relevant because of the diseases osteometabolic reach a large portion of the population, men and women. With this method, the signal is classified into two groups: tissue mass with bony tissues with normal or low bone mass. For this, techniques of feature extraction (Wavelet Transform) and pattern recognition (KNN and ANN) were used. The tests were performed on bovine bone and tissue with chemicals, the methodology and results are described in the work

Uma proposta de FSS fractal com geometria simplificada

Frequency Selective Surfaces (FSS) are periodic structures in one or two dimensions that act as spatial filters, can be formed by elements of type conductors patches or apertures, functioning as filters band-stop or band-pass respectively. The interest in the study of FSS has grown through the years, because such structures meet specific requirements as low-cost, reduced dimensions and weighs, beyond the possibility to integrate with other microwave circuits. The most varied applications for such structures have been investigated, as for example, radomes, antennas systems for airplanes, electromagnetic filters for reflective antennas, absorbers structures, etc. Several methods have been used for the analysis of FSS, among them, the Wave Method (WCIP). Are various shapes of elements that can be used in FSS, as for example, fractal type, which presents a relative geometric complexity. This work has as main objective to propose a simplification geometric procedure a fractal FSS, from the analysis of influence of details (gaps) of geometry of the same in behavior of the resonance frequency. Complementarily is shown a simple method to adjust the frequency resonance through analysis of a FSS, which uses a square basic cell, in which are inserted two reentrance and dimensions these reentrance are varied, making it possible to adjust the frequency. For this, the structures are analyzed numerically, using WCIP, and later are characterized experimentally comparing the results obtained. For the two cases is evaluated, the influence of electric and magnetic fields, the latter through the electric current density vector. Is realized a bibliographic study about the theme and are presented suggestions for the continuation of this work

Implementação de processador banda base ofdma para downlink lte em fpga

This work treats of an implementation OFDMA baseband processor in hardware for LTE Downlink. The LTE or Long Term Evolution consist the last stage of development of the technology called 3G (Mobile System Third Generation) which offers an increasing in data rate and more efficiency and flexibility in transmission with application of advanced antennas and multiple carriers techniques. This technology applies in your physical layer the OFDMA technical (Orthogonal Frequency Division Multiple Access) for generation of signals and mapping of physical resources in downlink and has as base theoretical to OFDM multiple carriers technique (Orthogonal Frequency Division Multiplexing). With recent completion of LTE specifications, different hardware solutions have been developed, mainly, to the level symbol processing where the implementation of OFDMA processor in base band is commonly considered, because it is also considered a basic architecture of others important applications. For implementation of processor, the reconfigurable hardware offered by devices as FPGA are considered which shares not only to meet the high requirements of flexibility and adaptability of LTE as well as offers possibility of an implementation quick and efficient. The implementation of processor in reconfigurable hardware meets the specifications of LTE physical layer as well as have the flexibility necessary for to meet others standards and application which use OFDMA processor as basic architecture for your systems. The results obtained through of simulation and verification functional system approval the functionality and flexibility of processor implemented

Predicao de campo em comunicacao sem fio

Even living in the XXI century are still some difficulties in access to broadband Internet in several Brazilian cities, due to the purchasing power of people and lack of government investment. But even with these difficulties, we seek to encourage the use of wireless technology, which is based on the IEEE 802.11b protocol - also known as Wi-Fi (Wireless Fidelity) Wireless Fidelity Communications, having wide range of commercial applications in the world market, nationally and internationally. In Brazil, this technology is in full operation in major cities and has proved attractive in relation to the access point to multipoint and point-to-point. This paper is a comparative analysis of prediction field, using models based on the prediction of propagation loss. To validate the techniques used here, the Okumura-Hata models, modified Okumura-Hata, Walfisch-Ikegami model, were applied to a wireless computer network, located in the neighborhood of Cajupiranga in the city of Melbourn, in Rio Grande do Norte . They are used for networking wireless 802.11b, using the Mobile Radio to measure signal levels, beyond the heights of the antennas and distances from the transmitter. The performance data versus distance are added to the graphs generated and compared with results obtained through calculations of propagation models

Aplicação do método LTT às estruturas retangulares e triangulares em multicamadas e empilhadas em substratos PBG para comunicações móveis

Recently the planar antennas have been studied due to their characteristics as well as the advantages that they offers when compared with another types of antennas. In the mobile communications area, the need for this kind of antennas have became each time bigger due to the intense increase of the mobile communications that needs of antennas which operate in multifrequency and wide bandwidth. The microstrip antennas presents narrow bandwidth due the loss in the dielectric generated by radiation. Another limitation is the radiation pattern degradation due the generation of surface waves in the substrate. In this work some used techniques to minimize the disadvantages (previously mentioned) of the use of microstrip antennas are presented, those are: substrates with PBG material - Photonic Bandgap, multilayer antennas and with stacked patches. The developed analysis in this work used the TTL - Transverse Transmission Line method in the domain of Fourier transform, that uses a component of propagation in the y direction (transverse to the direction real of propagation z), treating the general equations of electric and magnetic field as functions of y and y . This work has as objective the application of the TTL method to microstrip structures with single and multilayers of rectangular and triangular patches, to obtaining the resonance frequency and radiation pattern of each structure. This method is applied for the treatment of the fields in stacked structures. The Homogenization theory will be applied to obtaining the effective permittivity for s and p polarizations of the substrate composed of PBG material. Numerical results for the triangular and rectangular antennas with single layer, multilayers resonators with triangular and rectangular patches are presented (in photonic and isotropic substrates). Conclusions and suggestions for continuity of this work are presented

Estudo avaliativo de um algoritmo genético auto-organizável e multiobjetivo utilizando aprendizado de máquina para aplicações de telecomunicações

This paper presents an evaluative study about the effects of using a machine learning technique on the main features of a self-organizing and multiobjective genetic algorithm (GA). A typical GA can be seen as a search technique which is usually applied in problems involving no polynomial complexity. Originally, these algorithms were designed to create methods that seek acceptable solutions to problems where the global optimum is inaccessible or difficult to obtain. At first, the GAs considered only one evaluation function and a single objective optimization. Today, however, implementations that consider several optimization objectives simultaneously (multiobjective algorithms) are common, besides allowing the change of many components of the algorithm dynamically (self-organizing algorithms). At the same time, they are also common combinations of GAs with machine learning techniques to improve some of its characteristics of performance and use. In this work, a GA with a machine learning technique was analyzed and applied in a antenna design. We used a variant of bicubic interpolation technique, called 2D Spline, as machine learning technique to estimate the behavior of a dynamic fitness function, based on the knowledge obtained from a set of laboratory experiments. This fitness function is also called evaluation function and, it is responsible for determining the fitness degree of a candidate solution (individual), in relation to others in the same population. The algorithm can be applied in many areas, including in the field of telecommunications, as projects of antennas and frequency selective surfaces. In this particular work, the presented algorithm was developed to optimize the design of a microstrip antenna, usually used in wireless communication systems for application in Ultra-Wideband (UWB). The algorithm allowed the optimization of two variables of geometry antenna - the length (Ls) and width (Ws) a slit in the ground plane with respect to three objectives: radiated signal bandwidth, return loss and central frequency deviation. These two dimensions (Ws and Ls) are used as variables in three different interpolation functions, one Spline for each optimization objective, to compose a multiobjective and aggregate fitness function. The final result proposed by the algorithm was compared with the simulation program result and the measured result of a physical prototype of the antenna built in the laboratory. In the present study, the algorithm was analyzed with respect to their success degree in relation to four important characteristics of a self-organizing multiobjective GA: performance, flexibility, scalability and accuracy. At the end of the study, it was observed a time increase in algorithm execution in comparison to a common GA, due to the time required for the machine learning process. On the plus side, we notice a sensitive gain with respect to flexibility and accuracy of results, and a prosperous path that indicates directions to the algorithm to allow the optimization problems with "η" variables

Desempenho da mamoneira IAC 2028 em função do espaçamento entre fileiras e população de plantas na safrinha

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização de circuitos planares de micro-ondas pelo método iterativo das ondas

The planar circuits are structures that increasingly attracting the attention of researchers, due the good performance and capacity to integrate with other devices, in the prototyping of systems for transmitting and receiving signals in the microwave range. In this context, the study and development of new techniques for analysis of these devices have significantly contributed in the design of structures with excellent performance and high reliability. In this work, the full-wave method based on the concept of electromagnetic waves and the principle of reflection and transmission of waves at an interface, Wave Concept Iterative Procedure (WCIP), or iterative method of waves is described as a tool with high precision study microwave planar circuits. The proposed method is applied to the characterization of planar filters, microstrip antennas and frequency selective surfaces. Prototype devices were built and the experimental results confirmed the proposed mathematical model. The results were also compared with simulated results by Ansoft HFSS, observing a good agreement between them.

Densidades populacionais de milho em arranjos espaciais convencional e equidistante entre plantas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Espaçamento e população de plantas de mamoneira de porte baixo para colheita mecanizada

O objetivo deste trabalho foi avaliar o efeito do espaçamento entre fileiras e da população de plantas sobre a produtividade e outras características agronômicas da mamoneira de porte baixo, para a colheita mecanizada, na safra de verão. O experimento foi realizado durante os anos agrícolas 2007/2008 e 2008/2009, em um Latossolo Vermelho distroférrico, em Botucatu, SP, com uso da cultivar FCA-PB. Utilizou-se o delineamento de blocos ao acaso com parcelas subdivididas e quatro repetições. As parcelas foram constituídas por quatro espaçamentos entre fileiras (0,45, 0,60, 0,75 e 0,90m), e as subparcelas por quatro populações iniciais de plantas (25.000, 40.000, 55.000 e 70.000 plantas por hectare). O aumento da população de plantas, independentemente do espaçamento entre fileiras, diminuiu a sobrevivência de plantas, o diâmetro do caule, o número de racemos por planta e de frutos por racemo. As maiores produtividades de grãos e de óleo da cultivar FCA-PB são obtidas com populações iniciais entre 55.000 e 70.000 plantas por hectare, nos espaçamentos entre fileiras de 0,45 a 0,75 m.

Acúmulo de nutrientes e matéria seca na parte aérea de dois cultivares de soja RR sob efeito de formulações de glyphosate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sensibilidade de cultivares de algodoeiro ao cloreto de mepiquat

O objetivo deste trabalho foi avaliar a sensibilidade de cultivares de algodoeiro ao cloreto de mepiquat e verificar se ela está relacionada ao ciclo ou à arquitetura da planta. Foi realizado um experimento em casa de vegetação com seis cultivares de algodoeiro - FiberMax 966, FiberMax 977, Delta Penta, Delta Opal, FMT 501 e FMT 701 - e quatro doses do regulador vegetal à base de cloreto de mepiquat - 0, 7,5, 15 e 22,5 g ha-1 de i.a. -, em delineamento de blocos ao acaso, com arranjo fatorial 6x4 e quatro repetições. As parcelas experimentais foram constituídas por vasos de 12 L com duas plantas em cada um. As doses do regulador vegetal foram aplicadas sem adjuvante, no estádio de aparecimento dos botões florais, aos 34 dias após a emergência das plântulas. Paralelamente ao experimento com doses, a retenção do regulador pelas folhas das cultivares foi quantificada. O crescimento em altura das plantas de algodoeiro é diminuído com a aplicação do regulador vegetal, e esse efeito se intensifica com o aumento da dosagem aplicada. Existe diferença entre as cultivares estudadas quanto à sensibilidade ao cloreto de mepiquat, sendo que as mais precoces são mais sensíveis. Além da sensibilidade diferenciada, a arquitetura das plantas pode possibilitar maior ou menor deposição do regulador sobre as folhas.

Tricomas foliares em tomateiro com teores contrastantes do aleloquímico 2-tridecanona

Duas espécies de tomateiro, Lycopersicon esculentum Mill. (Linhagem TOM 556- padrão com baixo teor da metil cetona 2-tridecanona (2-TD) e Lycopersicon hirsutum Dunal var. glabratum Mill. (Linhagem PI 134417- padrão com elevado teor de 2-TD), foram analisadas em conjunto para identificação e quantificação de tricomas foliares. A parte experimental constou da identificação dos tricomas, baseado na presença ou ausência da cabeça secretora na extremidade apical dos tricomas, arranjo e número de células da cabeça, comprimento dos tricomas, e da quantificação do número de tricomas glandulares e não glandulares nos folíolos. O delineamento utilizado para o número de tricomas foi inteiramente casualizado e as médias comparadas pelo teste de Tukey, a 5%. A identificação e quantificação para as espécies foram: a) TOM 556: Tricomas não glandulares do tipo II + III + V (2590 cm-2 de área foliolar); glandular do tipo VI (16 cm-2); glandular do tipo VII (138 cm-2); b) PI 134417: não glandulares do tipo II + III + V (140 cm-2 de área foliolar); glandular do tipo I + IV (843 cm-2); glandular do tipo VI (83 cm-2); glandular do tipo VII (11 cm-2). As maiores concentrações da 2-TD nos folíolos, estão associadas às maiores densidades de tricomas glandulares presentes em ambas espécies.

Sensores de reflectância e fluorescência na avaliação de teores de nitrogênio, produção de biomassa e produtividade do algodoeiro

O objetivo deste trabalho foi avaliar o potencial de utilização dos sensores de reflectância e fluorescência na avaliação de teores de N‑NO3‑ no pecíolo, na produção de biomassa e na produtividade do algodoeiro. Utilizou-se o delineamento experimental de blocos ao acaso em arranjo fatorial 3x4, com quatro repetições. Os tratamentos consistiram de três variedades de algodão (ST‑4288‑B2RF, ST‑4498‑B2RF e DP-164‑B2RF) e quatro doses de N (0, 45, 90 e 135 kg ha‑1). Aos 120 dias após a semeadura, foram realizadas leituras com sensores ópticos de reflectância e fluorescência. Não houve correlação significativa dos teores de N‑NO3‑ no pecíolo com os índices de reflectância; porém, houve correlação destes com a produção de biomassa (0,39) e a produtividade (0,32 a 0,41). Os índices do sensor de fluorescência correlacionaram-se significativamente com teores de N‑NO3‑ no pecíolo (0,34 a 0,61), produção de biomassa (0,30 a 0,53) e produtividade (0,34). em comparação com os índices de reflectância, os de fluorescência apresentam maior capacidade de avaliar os teores de N‑NO3‑ no pecíolo, capacidade semelhante em detectar variação na biomassa e menor capacidade de detectar variação da produtividade do algodoeiro, quando se aplicam doses crescentes de N.

Organic compounds from plant extracts and their effect on soil phosphorus availability

O objetivo deste trabalho foi avaliar o efeito de compostos orgânicos de extratos de plantas de seis espécies e da fertilização fosfatada na disponibilidade de fósforo no solo. Tubos de 30 cm de altura e 5 cm de diâmetro foram preenchidos com Latossolo Vermelho-Amarelo. Cada tubo constituiu uma parcela, em delineamento completamente casualizado, em arranjo fatorial 7x2, com quatro repetições. Extratos líquidos de aveia-preta (Avena strigosa), nabo forrageiro (Raphanus sativus), milho (Zea mays), milheto (Pennisetum glaucum), soja (Glycine max), sorgo forrageiro (Sorghum bicolor) e água (testemunha) foram aplicados em cada parcela, com ou sem fertilização com fosfato solúvel. Após sete dias de incubação, amostras de solo foram coletadas em várias profundidades, e foram analisadas as formas lábil, moderadamente lábil e não lábil de fósforo no solo. Houve acúmulo de fósforo inorgânico nas frações lábil e moderadamente lábil do solo, como conseqüência da adição dos extratos de plantas, principalmente na camada superficial (0-5 cm). O nabo forrageiro, com maior concentração de ácido málico e maior conteúdo de P no tecido do que outras espécies, foi o mais eficiente em incrementar a disponibilidade de P no solo.