795 resultados para Agência Nacional de Saúde Suplementar (Brasil)


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The National Policy on Mental Health is characterized as a territorial - political community , and it has the Psychoso cial Care Strategy (Eaps) as guideline for the proposal and the development of their actions. In its design, CAPS is idealized to be a strategic equipment within the Psychoso cial Care Network/RAPS. Matricial support and at tention to the crisis constitute strategic areas of action of CAPS in its replacement mission , and as it is g uided by the scope of deinstitutionalization, those are essential to the success of these services. We argue that sustain crises in existential territories of life is a condition for the effectiveness of psychosocial care and, ultimately, to the sustainability of its Reform. In this direction, the matricial support tool reveals a territorial supporter, intercessory and powerful in building a psychosocial care to the crisis. Recognized as one of the major challenges by the Brazilian Ministry of Health, forward these fronts materializes for workers in their mi cropolitical crafts. Our research arises as an investment toward empower them , and aimed to understand the operationalization of attention to the crisis and matricial support in a CAPS II, in the view of its workers . Besides, it aims to examine such practi ces forward the principles and purposes of Psychosocial Care Strategy. Inspired by the research - intervention and by the political and social ideas of Institutiona l Analysis, we offer a space for reflection and exchange, by implicational interviews , enablin g workers to launch them in analysis of practices in the EAPs view. We have done a documentary consulting CAPS Technical Project, and a return stage to the institution, by organizing workshop and conversation groups with CAPS workers. The results have show n that there are institutional logics in competition on that service. When operating the logic risk, some difficulties in sustaining most intense crisis situations were identified, the psychiatric hospital internment is used as a facility, particularly in view of some cases, in which the aggressiveness of the person in crises becomes aggressive, and when the brackets SAMU, the CAPS III and Comprehensive Care Beds do not respond satisfactorily to their users requests. Order weaknesses were indicated in this thesis as macropolitical and micropolitical interfering in network support. The matricial actions were identified as a powerful intercessor resource in crisis care appeared weakened, and indicates little porosity in the relationship between the Service and the territory where it takes place. Noticed by the logic of home care, without operate primarily as a knowledge exchange device, we saw capture points in the logic of assistance with ambulatoriza tion production of CAPS, welfare practices and "ext empore " . T he E APs , although it emerge s as a guiding, it is not seen to workers as effective practice. On the one hand, the results signaled that the attention to the crisis and the matricial actions are developed without tenacious connection with the purposes of EA Ps, on the other hand, successful cases were indicated with the main leads to conducting wire of intersectoral actions to the powerful bonds and to the participation of user in their care process es , indicating insurgent forces tha t intend by traditional lo gic .

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work describes the synthesis and study of the application of a new surfactant (Triester Lipophilic – TEL) obtained by citric acid with octanol. It is reaction was followed by thin layer chromatography (TLC) and after purification the product was characterized by proton and 13 – carbon nuclear magnetic resonance spectroscopy ( H and 13C NMR), thermogravimetric analysis (TGA) and surface tension analysis of oil-in-water emulsions. The TEL performance as surfactant in ester, n-paraffin and biodiesel based drilling fluids on the 70/30 and 60/40 water- oil rations (WOR) was evaluated by comparative tests of two commercial products used in the fields. These drilling fluids were aged in roller oven at 200 0 F during 16 h. The rheological and electric stability measurements were carried out at 135 ºF, the phase separation was evaluated after seven days at rest and the filtrate volume of drilling fluids was determined at high temperature and high pressure. The rheological behavior of the drilling fluids was evaluated by the flow curves. The results showed that the drilling fluids studied here presented Binghamian behavior as well as the used in the oil fields. The laboratory tests showed that the TEL reduced the filtrate volume and promoted the enhance of the thermal and mechanical stabilities.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Multi-Cloud Applications are composed of services offered by multiple cloud platforms where the user/developer has full knowledge of the use of such platforms. The use of multiple cloud platforms avoids the following problems: (i) vendor lock-in, which is dependency on the application of a certain cloud platform, which is prejudicial in the case of degradation or failure of platform services, or even price increasing on service usage; (ii) degradation or failure of the application due to fluctuations in quality of service (QoS) provided by some cloud platform, or even due to a failure of any service. In multi-cloud scenario is possible to change a service in failure or with QoS problems for an equivalent of another cloud platform. So that an application can adopt the perspective multi-cloud is necessary to create mechanisms that are able to select which cloud services/platforms should be used in accordance with the requirements determined by the programmer/user. In this context, the major challenges in terms of development of such applications include questions such as: (i) the choice of which underlying services and cloud computing platforms should be used based on the defined user requirements in terms of functionality and quality (ii) the need to continually monitor the dynamic information (such as response time, availability, price, availability), related to cloud services, in addition to the wide variety of services, and (iii) the need to adapt the application if QoS violations affect user defined requirements. This PhD thesis proposes an approach for dynamic adaptation of multi-cloud applications to be applied when a service is unavailable or when the requirements set by the user/developer point out that other available multi-cloud configuration meets more efficiently. Thus, this work proposes a strategy composed of two phases. The first phase consists of the application modeling, exploring the similarities representation capacity and variability proposals in the context of the paradigm of Software Product Lines (SPL). In this phase it is used an extended feature model to specify the cloud service configuration to be used by the application (similarities) and the different possible providers for each service (variability). Furthermore, the non-functional requirements associated with cloud services are specified by properties in this model by describing dynamic information about these services. The second phase consists of an autonomic process based on MAPE-K control loop, which is responsible for selecting, optimally, a multicloud configuration that meets the established requirements, and perform the adaptation. The adaptation strategy proposed is independent of the used programming technique for performing the adaptation. In this work we implement the adaptation strategy using various programming techniques such as aspect-oriented programming, context-oriented programming and components and services oriented programming. Based on the proposed steps, we tried to assess the following: (i) the process of modeling and the specification of non-functional requirements can ensure effective monitoring of user satisfaction; (ii) if the optimal selection process presents significant gains compared to sequential approach; and (iii) which techniques have the best trade-off when compared efforts to development/modularity and performance.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Water injection in oil reservoirs is a recovery technique widely used for oil recovery. However, the injected water contains suspended particles that can be trapped, causing formation damage and injectivity decline. In such cases, it is necessary to stimulate the damaged formation looking forward to restore the injectivity of the injection wells. Injectivity decline causes a major negative impact to the economy of oil production, which is why, it is important to foresee the injectivity behavior for a good waterflooding management project. Mathematical models for injectivity losses allow studying the effect of the injected water quality, also the well and formation characteristics. Therefore, a mathematical model of injectivity losses for perforated injection wells was developed. The scientific novelty of this work relates to the modeling and prediction of injectivity decline in perforated injection wells, considering deep filtration and the formation of external cake in spheroidal perforations. The classic modeling for deep filtration was rewritten using spheroidal coordinates. The solution to the concentration of suspended particles was obtained analytically and the concentration of the retained particles, which cause formation damage, was solved numerically. The acquisition of the solution to impedance assumed a constant injection rate and the modified Darcy´s Law, defined as being the inverse of the normalized injectivity by the inverse of the initial injectivity. Finally, classic linear flow injectivity tests were performed within Berea sandstone samples, and within perforated samples. The parameters of the model, filtration and formation damage coefficients, obtained from the data, were used to verify the proposed modeling. The simulations showed a good fit to the experimental data, it was observed that the ratio between the particle size and pore has a large influence on the behavior of injectivity decline.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Ostomized is every individual that, because of a traumatic or clinical condition, it required a surgery resulting in the externalization of a hollow organ through the skin, and such temporary or permanent condition. This study has the general objective to investigate the relationship between body image and self-esteem in these individuals; as well as to verify their levels of satisfaction with their body image regarding the aspect of appearance and to evaluate the degree of self-esteem related to that condition. This is a correlational research, cross-sectional, which was accomplished in an institution in support of these users of Rio Grande do Norte state, with location in Natal. There were used three sampling instruments: a structured general questionnaire covering socio-demographic and clinical data; the Satisfaction Scale with Appearance (SSA) and the Rosenberg Self-Esteem Scale (RSS). The information obtained was analyzed with the aid of an electronic spreadsheet software. The project is according with the resolution 466/12 of the National Health Council, It was approved by the Research Ethics Committee of UFRN, under number CAAE 19159713.5.0000.5537 in August 2013. The sample consisted of 93 participants with an average age of 50.4 years (SD = 15.4). In general they had low satisfaction with their body image (M = 66.9), as regards the appearance, although maintained high levels of self-esteem (M = 34.8). Therefore, It was found a positive correlation, moderate (ρ = 0.426) and statistically significant was found (p <0.001) from the application of the Spearman correlation test. Therefore, dissatisfaction with body image is an important issue to be observed by professionals who attend ostomizeds. however, it seems, other aspects are also influencing the level of self-esteem of these individuals, who were not able to be determined in this study.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Sandstone-type reservoir rocks are commonly responsible for oil accumulation. The wettability is an important parameter for the physical properties of the container, since it interferes in characteristics such as relative permeability to the aqueous phase, residual oil distribution in the reservoir, operating characteristics with waterflood and recovery of crude oil. This study applied different types of microemulsion systems - MES - in sandstone reservoirs and evaluated their influences on wettability and residual oil recovery. For this purpose, four microemulsion were prepared by changing the nature of ionic surfactants (ionic and nonionic). Microemulsions could then be characterized by surface tension analysis, density, particle diameter and viscosity in the temperature range 30° C to 70° C. The studied oil was described as light and the sandstone rock was derived from the Botucatu formation. The study of the influence of microemulsion systems on sandstone wettability was performed by contact angle measurements using as parameters the rock treatment time with the MES and the time after the brine surface contact by checking the angle variation behavior. In the study results, the rock was initially wettable to oil and had its wettability changed to mixed wettability after treatment with MES, obtaining preference for water. Regarding rock-MES contact time, it was observed that the rock wettability changed more when the contact time between the surface and the microemulsion systems was longer. It was also noted only a significant reduction for the first 5 minutes of interaction between the treated surface and brine. The synthesized anionic surfactant, commercial cationic, commercial anionic and commercial nonionic microemulsion systems presented the best results, respectively. With regard to enhanced oil recovery performance, all systems showed a significant percentage of recovered oil, with the anionic systems presenting the best results. A percentage of 80% recovery was reached, confirming the wettability study results, which pointed the influence of this property on the interaction of fluids and reservoir rock, and the ability of microemulsion systems to perform enhanced oil recovery in sandstone reservoirs.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Sandstone-type reservoir rocks are commonly responsible for oil accumulation. The wettability is an important parameter for the physical properties of the container, since it interferes in characteristics such as relative permeability to the aqueous phase, residual oil distribution in the reservoir, operating characteristics with waterflood and recovery of crude oil. This study applied different types of microemulsion systems - MES - in sandstone reservoirs and evaluated their influences on wettability and residual oil recovery. For this purpose, four microemulsion were prepared by changing the nature of ionic surfactants (ionic and nonionic). Microemulsions could then be characterized by surface tension analysis, density, particle diameter and viscosity in the temperature range 30° C to 70° C. The studied oil was described as light and the sandstone rock was derived from the Botucatu formation. The study of the influence of microemulsion systems on sandstone wettability was performed by contact angle measurements using as parameters the rock treatment time with the MES and the time after the brine surface contact by checking the angle variation behavior. In the study results, the rock was initially wettable to oil and had its wettability changed to mixed wettability after treatment with MES, obtaining preference for water. Regarding rock-MES contact time, it was observed that the rock wettability changed more when the contact time between the surface and the microemulsion systems was longer. It was also noted only a significant reduction for the first 5 minutes of interaction between the treated surface and brine. The synthesized anionic surfactant, commercial cationic, commercial anionic and commercial nonionic microemulsion systems presented the best results, respectively. With regard to enhanced oil recovery performance, all systems showed a significant percentage of recovered oil, with the anionic systems presenting the best results. A percentage of 80% recovery was reached, confirming the wettability study results, which pointed the influence of this property on the interaction of fluids and reservoir rock, and the ability of microemulsion systems to perform enhanced oil recovery in sandstone reservoirs.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this study was to characterize the structural-geophysical expression of the Transbrasiliano Lineament (TBL) in the east-central portion of the Parnaíba Basin. The TBL corresponds to a major Neoproterozoic NE-trending shear zone related to the Brasiliano orogenic cycle, with dextral strike-slip kinematics, underlying (but also laterally exposed in the NE and SW basin edges) the sedimentary section of the Parnaíba Basin. In this study, the interpretation of gravity and magnetic anomaly maps is consistent with the TBL kinematics, the signature of the geophysical anomalies corresponding to the high (plastic behaviour) and subsequent declining temperature (ductile to brittle behaviour) stages during Brasiliano and late Brasiliano times. The pattern of residual gravity anomalies is compatible with an S-C dextral pair shaping the geological bodies of an heterogeneous basement, such as slices of gneisses and granulites (positive anomalies), granitic and low-medium grade metasedimentary rocks (negative anomalies). Such anomalies curvilinear trends, ranging from NNE (interpreted as S surfaces) to NE (C surfaces), correspond to flattening surfaces (S), while the NE rectilinear trend must represent a C band. The narrower magnetic anomalies also display NNE to NE (S surfaces) trends and should correspond to similar (although narrower and more discontinuous) sources in the equivalent anomaly patterns. Pre-Silurian pull-apart style grabens may contribute to the NE negative gravimetric anomalies, although this interpretation demands control by seismic data analysis. On the other hand, the curvilinear anomalies associated to contractional trends are incompatible with their interpretation as pre-Silurian graben, in both maps. In the (reduced to the pole) magnetic anomalies map, most of these are again associated to low-temperature shear zones (C planes) and faults, juxtaposing distinct blocks in terms of magnetic properties, or eventually filled with basic bodies. It is also possible that some isolated magnetic anomalies correspond to igneous bodies of late-Brasiliano or Mesozoic age. The basement late discontinuities pattern can be interpreted in analogy to the Riedel fractures model, with steep dipping surfaces and a sub-horizontal movement section. This study also explored 2D gravity modeling controlled by the interpretation of a dip seismic line as regards to the Transbrasiliano Lineament. The rock section equivalent to the Jaibaras Group occupying a graben structure (as identified in the seismic line) corresponds to a discrete negative anomaly superimposed to a gravimetric high, once again indicating a stronger influence of older crystalline basement rocks as gravimetric sources, mainly reflecting the heterogeneities and anisotropies generated at high temperature conditions and their subsequent cooling along the TBL, during the Brasiliano cycle.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this study was to characterize the structural-geophysical expression of the Transbrasiliano Lineament (TBL) in the east-central portion of the Parnaíba Basin. The TBL corresponds to a major Neoproterozoic NE-trending shear zone related to the Brasiliano orogenic cycle, with dextral strike-slip kinematics, underlying (but also laterally exposed in the NE and SW basin edges) the sedimentary section of the Parnaíba Basin. In this study, the interpretation of gravity and magnetic anomaly maps is consistent with the TBL kinematics, the signature of the geophysical anomalies corresponding to the high (plastic behaviour) and subsequent declining temperature (ductile to brittle behaviour) stages during Brasiliano and late Brasiliano times. The pattern of residual gravity anomalies is compatible with an S-C dextral pair shaping the geological bodies of an heterogeneous basement, such as slices of gneisses and granulites (positive anomalies), granitic and low-medium grade metasedimentary rocks (negative anomalies). Such anomalies curvilinear trends, ranging from NNE (interpreted as S surfaces) to NE (C surfaces), correspond to flattening surfaces (S), while the NE rectilinear trend must represent a C band. The narrower magnetic anomalies also display NNE to NE (S surfaces) trends and should correspond to similar (although narrower and more discontinuous) sources in the equivalent anomaly patterns. Pre-Silurian pull-apart style grabens may contribute to the NE negative gravimetric anomalies, although this interpretation demands control by seismic data analysis. On the other hand, the curvilinear anomalies associated to contractional trends are incompatible with their interpretation as pre-Silurian graben, in both maps. In the (reduced to the pole) magnetic anomalies map, most of these are again associated to low-temperature shear zones (C planes) and faults, juxtaposing distinct blocks in terms of magnetic properties, or eventually filled with basic bodies. It is also possible that some isolated magnetic anomalies correspond to igneous bodies of late-Brasiliano or Mesozoic age. The basement late discontinuities pattern can be interpreted in analogy to the Riedel fractures model, with steep dipping surfaces and a sub-horizontal movement section. This study also explored 2D gravity modeling controlled by the interpretation of a dip seismic line as regards to the Transbrasiliano Lineament. The rock section equivalent to the Jaibaras Group occupying a graben structure (as identified in the seismic line) corresponds to a discrete negative anomaly superimposed to a gravimetric high, once again indicating a stronger influence of older crystalline basement rocks as gravimetric sources, mainly reflecting the heterogeneities and anisotropies generated at high temperature conditions and their subsequent cooling along the TBL, during the Brasiliano cycle.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The Artificial Neural Networks (ANN), which is one of the branches of Artificial Intelligence (AI), are being employed as a solution to many complex problems existing in several areas. To solve these problems, it is essential that its implementation is done in hardware. Among the strategies to be adopted and met during the design phase and implementation of RNAs in hardware, connections between neurons are the ones that need more attention. Recently, are RNAs implemented both in application specific integrated circuits's (Application Specific Integrated Circuits - ASIC) and in integrated circuits configured by the user, like the Field Programmable Gate Array (FPGA), which have the ability to be partially rewritten, at runtime, forming thus a system Partially Reconfigurable (SPR), the use of which provides several advantages, such as flexibility in implementation and cost reduction. It has been noted a considerable increase in the use of FPGAs for implementing ANNs. Given the above, it is proposed to implement an array of reconfigurable neurons for topologies Description of artificial neural network multilayer perceptrons (MLPs) in FPGA, in order to encourage feedback and reuse of neural processors (perceptrons) used in the same area of the circuit. It is further proposed, a communication network capable of performing the reuse of artificial neurons. The architecture of the proposed system will configure various topologies MLPs networks through partial reconfiguration of the FPGA. To allow this flexibility RNAs settings, a set of digital components (datapath), and a controller were developed to execute instructions that define each topology for MLP neural network.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The Artificial Neural Networks (ANN), which is one of the branches of Artificial Intelligence (AI), are being employed as a solution to many complex problems existing in several areas. To solve these problems, it is essential that its implementation is done in hardware. Among the strategies to be adopted and met during the design phase and implementation of RNAs in hardware, connections between neurons are the ones that need more attention. Recently, are RNAs implemented both in application specific integrated circuits's (Application Specific Integrated Circuits - ASIC) and in integrated circuits configured by the user, like the Field Programmable Gate Array (FPGA), which have the ability to be partially rewritten, at runtime, forming thus a system Partially Reconfigurable (SPR), the use of which provides several advantages, such as flexibility in implementation and cost reduction. It has been noted a considerable increase in the use of FPGAs for implementing ANNs. Given the above, it is proposed to implement an array of reconfigurable neurons for topologies Description of artificial neural network multilayer perceptrons (MLPs) in FPGA, in order to encourage feedback and reuse of neural processors (perceptrons) used in the same area of the circuit. It is further proposed, a communication network capable of performing the reuse of artificial neurons. The architecture of the proposed system will configure various topologies MLPs networks through partial reconfiguration of the FPGA. To allow this flexibility RNAs settings, a set of digital components (datapath), and a controller were developed to execute instructions that define each topology for MLP neural network.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The main objective of this work was to enable the recognition of human gestures through the development of a computer program. The program created captures the gestures executed by the user through a camera attached to the computer and sends it to the robot command referring to the gesture. They were interpreted in total ve gestures made by human hand. The software (developed in C ++) widely used the computer vision concepts and open source library OpenCV that directly impact the overall e ciency of the control of mobile robots. The computer vision concepts take into account the use of lters to smooth/blur the image noise reduction, color space to better suit the developer's desktop as well as useful information for manipulating digital images. The OpenCV library was essential in creating the project because it was possible to use various functions/procedures for complete control lters, image borders, image area, the geometric center of borders, exchange of color spaces, convex hull and convexity defect, plus all the necessary means for the characterization of imaged features. During the development of the software was the appearance of several problems, as false positives (noise), underperforming the insertion of various lters with sizes oversized masks, as well as problems arising from the choice of color space for processing human skin tones. However, after the development of seven versions of the control software, it was possible to minimize the occurrence of false positives due to a better use of lters combined with a well-dimensioned mask size (tested at run time) all associated with a programming logic that has been perfected over the construction of the seven versions. After all the development is managed software that met the established requirements. After the completion of the control software, it was observed that the overall e ectiveness of the various programs, highlighting in particular the V programs: 84.75 %, with VI: 93.00 % and VII with: 94.67 % showed that the nal program performed well in interpreting gestures, proving that it was possible the mobile robot control through human gestures without the need for external accessories to give it a better mobility and cost savings for maintain such a system. The great merit of the program was to assist capacity in demystifying the man set/machine therefore uses an easy and intuitive interface for control of mobile robots. Another important feature observed is that to control the mobile robot is not necessary to be close to the same, as to control the equipment is necessary to receive only the address that the Robotino passes to the program via network or Wi-Fi.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The main aim of this research was to study pluviosity in the Paranaíba Riverbasin, especially concerning the variability frame and trends. For this end, we used data from 22 pluviometric stations of the Agência Nacional da Águas- ANA(National Water Agency)spatially distributed throughout the basin area. The data comprised the years 1979-2013, which is a historical series of 35 years, and was downloaded through the ANA website and tabulated using the Hydro 1.2 software (2015) and Excel. After tabulation process were applied based methodologies for statistical analysis of annual variability, monthly, daily and seasonal rainfall in the basin beyond the trend analysis. Results of this research showed that the annual rainfall averageis 1491 mm. Seasonality is a hallmark and rainfall variability occurs spatially and temporally. Rains are accumulated in the rainy season accumulating 85% of the annual volume in the basin. In daily analysis it was found that the daily rainfall above 30 mm occur in only 3% of the time. Dry season comprises 15% of the rainfall. Trend analysis using linear regression pointed to a downward trend in rainfall in 46% of jobs, stability in 18% of posts and increased rainfall by 36%. As for the analysis using the sign test indicated that 32% of the analyzed rainfall stations showed an increasing trend of rainfall over the time series and 68% of stations showed downward trend. This research is important because shows how rainfall worksin the area of the Paranaiba basin, and may be used to develop better management of natural resources and the area through public policies for this purpose.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

When expressed by mental health services users, sexuality is typically denied by professionals, viewed as another symptom or as if these people are not capable of practicing it. Once Brazilian health professionals haven’t shown lots of investment in this theme, and few are the studies in this field, it is necessary the attention to be focused on researches involving this public. Therefore, the main goal of this study was understand the meanings of sexuality of the mental health services users, which were negotiated in sexuality workshops. The secondary goals were: a) understand the meanings of themes about sexuality brought by users through their experiences of everyday life; b) to evaluate the facilitating experience of the workshops on sexuality at CAPS. Thus, 10 workshops on sexuality were held, with an average of an hour and twenty minutes each, distributed from December 2014 and April 2015. There were 43 participants, 29 women and 14 men. The meetings had the following central themes: sexuality; sexuality and mental health; myths, beliefs and sexual taboos; gender identity; sexual orientation; sexual and reproductive rights; safe sex; and STD/AIDS. The data collection was through audio-recording of these meetings. Later, was made the transcript of the workshops, a careful reading of these transcripts and then its analysis. It was identified categories to analyze the interfaces that permeate the focus of the study. Initially, the categories relating to mental health and sexuality: meanings about sexuality; gender issues; gender and religion; sexual rights, STD/AIDS prevention and attention or denial of sexuality at CAPS. Later, those relating to the workshops facilitating process: challenges in facilitating the workshops; and the perception of the participants. A variety of meanings about sexuality could be noticed in the users’ statements, relating it more with affection and respect than with intercourse. The gender issues that emerged during the workshops were related to marital relationship, sexism, domestic violence, psychological violence and male and female roles in society. Moreover, were also revealed some situations that associated gender differences with religious issues, such as the submission of women and homosexuality. It was also noticed some experiences of the participants involving worrying situations of family violence, suicidal ideation and chemical castration, were often mismanaged or ignored by the service professionals. With regard to the facilitation of the workshops, it was possible to legitimize it as places where users were able to talk openly about the suggested themes and highlight its importance to the study site. Besides, it’s possible to list a few challenges of its facilitation in a mental health service, which was in general positively evaluated by the participants. Thus, the research highlights the need for sexuality theme discussion in mental health services, in order to understand, discuss and inform the users. Also, it’s important to problematize the stigma created in the theme relation with the users, the professionals and the society, working its specificities and avoiding a pathological bias.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In 2004, the National Institutes of Health made available the Patient-Reported Outcomes Measurement Information System – PROMIS®, which is constituted of innovative item banks for health assessment. It is based on classical, reliable Patient-Reported Outcomes (PROs) and includes advanced statistical methods, such as Item Response Theory and Computerized Adaptive Test. One of PROMIS® Domain Frameworks is the Physical Function, whose item bank need to be translated and culturally adapted so it can be used in Portuguese speaking countries. This work aimed to translate and culturally adapt the PROMIS® Physical Function item bank into Portuguese. FACIT (Functional Assessment of Chronic Illness Therapy) translation methodology, which is constituted of eight stages for translation and cultural adaptation, was used. Fifty subjects above the age of 18 years participated in the pre-test (seventh stage). The questionnaire was answered by the participants (self-reported questionnaires) by using think aloud protocol, and cognitive and retrospective interviews. In FACIT methodology, adaptations can be done since the beginning of the translation and cultural adaption process, ensuring semantic, conceptual, cultural, and operational equivalences of the Physical Function Domain. During the pre-test, 24% of the subjects had difficulties understanding the items, 22% of the subjects suggested changes to improve understanding. The terms and concepts of the items were totally understood (100%) in 87% of the items. Only four items had less than 80% of understanding; for this reason, it was necessary to chance them so they could have correspondence with the original item and be understood by the subjects, after retesting. The process of translation and cultural adaptation of the PROMIS® Physical Function item bank into Portuguese was successful. This version of the assessment tool must have its psychometric properties validated before being made available for clinical use.