On the Source and Rewriting of 1 Corinthians 2.9 in Christian, Jewish and Islamic Traditions (1 Clem 34.8; GosJud 47.10-13; a ḥadīth qudsī)

The article reopens the file of sources, parallels and rewritings of 1 Cor 2.9, a saying that Paul attributes to some written source, when others sources put it into Jesus' mouth (e.g. GosThom 17). A state of research highlights that the hypothesis of an oral source is generally preferred but an accurate study of 1 Clem 34.8, a parallel too often neglected, supports the presence of a written source that existed before 1 Cor 2.9. GosJud 47.10-13 will help to understand the attribution of the saying to Jesus. The last important part of this article studies its parallel in Islamic traditions, a ḥadīth qudsī.

SOIL CHEMICAL PROPERTIES AND GROWTH OF SUNFLOWER (HELIANTHUS ANNUUS L.) AS AFFECTED BY THE APPLICATION OF ORGANIC FERTILIZERS AND INOCULATION WITH ARBUSCULAR MYCORRHIZAL FUNGI

The use of organic fertilizers and the inoculation of mycorrhizal fungi in the cultivation of oil crops is essential to reduce production costs and minimize negative impacts on natural resources. A field experiment was conducted in an Argissolo Amarelo (Ultisol) with the aim of evaluating the effects of fertilizer application and inoculation of arbuscular mycorrhizal fungi on the growth attributes of sunflower (Helianthus annuus L.) and on soil chemical properties. The experiment was conducted at the Federal University of Rio Grande do Norte, Brazil, using a randomized block design with three replicates in a 4 × 2 factorial arrangement consisting of four treatments in regard to application of organic fertilizer (liquid biofertilizer, cow urine, mineral fertilizer, and unfertilized control) and two treatments in regard to arbuscular mycorrhizal fungi (with and without mycorrhizal fungi). The results showed that the physiological attributes of relative growth rate and leaf weight ratio were positively influenced by fertilization, compared to the control treatment, likely brought about by the supply of nutrients from the fertilizers applied. The growth and productivity attributes were positively affected by mycorrhization.

"Working Alliance" Works Best, Data Download, Iowa Department of Corrections, March 2011

Within the last few years correctional research has clearly shown that the working alliance or rapport between correctional officer/staff member and offender is a critical component in reducing recidivism. Some research even attributes up to 40% of offender change or success to this relationship.

Insight into oversight : how information commissioners contribute to the achievement of access-to-information policy objectives

This thesis examines how oversight bodies, as part of an ATI policy, contribute to the achievement of the policy's objectives. The aim of the thesis is to see how oversight bodies and the work they do affects the implementation of their respective ATI policies and thereby contributes to the objectives of those policies using a comparative case study approach. The thesis investigates how federal/central government level information commissioners in four jurisdictions - Germany, India, Scotland, and Switzerland - enforce their respective ATI policies, which tasks they carry out in addition to their enforcement duties, the challenges they face in their work and the ways they overcome these. Qualitative data were gathered from primary and secondary documents as well as in 37 semi-structured interviews with staff of the commissioners' offices, administrative officials whose job entails complying with ATI, people who have made ATI requests and appealed to their respective oversight body, and external experts who have studied ATI implementation in their particular jurisdiction. The thesis finds that while the aspect of an oversight body's formal independence that has the greatest impact on its work is resource control and that although the powers granted by law set the framework for ensuring that the administration is properly complying with the policy, the commissioner's leadership style - a component of informal independence - has more influence than formal attributes of independence in setting out how resources are obtained and used as well as how staff set priorities and utilize the powers they are granted by law. The conclusion, therefore, is that an ATI oversight body's ability to contribute to the achievement of the policy's objectives is a function of three main factors: a. commissioner's leadership style; b. adequacy of resources and degree of control the organization has over them; c. powers and the exercise of discretion in using them. In effect, the thesis argues that it is difficult to pinpoint the value of the formal powers set out for the oversight body in the ATI law, and that their decisions on whether and how to use them are more important than the presumed strength of the powers. It also claims that the choices made by the commissioners and their staff regarding priorities and use of powers are determined to a large extent by the adequacy of resources and the degree of control the organization has over those resources. In turn, how the head of the organization leads and manages the oversight body is crucial to both the adequacy of the organization's resources and the decisions made about the use of powers. Together, these three factors have a significant impact on the body's effectiveness in contributing to ATI objectives.

Multiple Geotechnological Tools Applied to Digital Mapping of Tropical Soils

ABSTRACT In recent years, geotechnologies as remote and proximal sensing and attributes derived from digital terrain elevation models indicated to be very useful for the description of soil variability. However, these information sources are rarely used together. Therefore, a methodology for assessing and specialize soil classes using the information obtained from remote/proximal sensing, GIS and technical knowledge has been applied and evaluated. Two areas of study, in the State of São Paulo, Brazil, totaling approximately 28.000 ha were used for this work. First, in an area (area 1), conventional pedological mapping was done and from the soil classes found patterns were obtained with the following information: a) spectral information (forms of features and absorption intensity of spectral curves with 350 wavelengths -2,500 nm) of soil samples collected at specific points in the area (according to each soil type); b) obtaining equations for determining chemical and physical properties of the soil from the relationship between the results obtained in the laboratory by the conventional method, the levels of chemical and physical attributes with the spectral data; c) supervised classification of Landsat TM 5 images, in order to detect changes in the size of the soil particles (soil texture); d) relationship between classes relief soils and attributes. Subsequently, the obtained patterns were applied in area 2 obtain pedological classification of soils, but in GIS (ArcGIS). Finally, we developed a conventional pedological mapping in area 2 to which was compared with a digital map, ie the one obtained only with pre certain standards. The proposed methodology had a 79 % accuracy in the first categorical level of Soil Classification System, 60 % accuracy in the second category level and became less useful in the categorical level 3 (37 % accuracy).

Planosols Developed in Different Geoenvironmental Conditions in Northeastern Brazil

ABSTRACT The semiarid region of northeastern Brazil has a large area occupied by Planosols, where in the State of Pernambuco these soils are mainly used for livestock farming and subsistence crops. The knowledge on these soils is limited, which compromises the understanding on their behavior, potentialities and limitations.This study aimed to analyze morphological, chemical, physical and mineralogical attributes of Planosols developed under different geoenvironmental conditions. Morphological descriptions and chemical, physical and mineralogical analyses were performed in four profiles of Planosols along a rainfall gradient. An increase in rainfall allowed for an increase in the clay content in the Bt horizon and a reduction in ESP, EC, Na+, CEC, S, pH (water and KCl) and soil density. Horizons A and E were thicker in Planosols in more humid environments. The increase in ESP associated with the presence of expansive minerals (smectite and vermiculite) allowed the development of a prismatic structure in Haplic Planosols and a columnar structure in Natric Planosols. The mineralogical assembly is indicative of poorly weathered soils. The mineralogical assemblies of the silt and clay fractions were similar in the different geoenvironments, while higher contents of easily alterable minerals were observed in the composition of the sand fraction in environments with a drier climate.

Preparing Tomorrow's Transportation Workforce: A Midwest Summit, 2010

regional transportation workforce development summits held across the United States in 2009 and 2010 as part of a coordinated initiative to ultimately develop a national strategy to address future transportation workforce issues. The initiative is being led by the U.S. Department of Transportation’s (DOT) Research and Innovative Technology Administration (RITA). This particular summit was hosted by Iowa State University’s Midwest Transportation Consortium (MTC) and Institute for Transportation (InTrans). The purpose of the Midwest summit was to assess the educational and training needs of the future transportation workforce and identify strategies to address those needs across various career paths. It addressed a broad spectrum of topics including strategies to attract women and under-represented minority groups, pre-college opportunities and strategies, post-secondary education, post-college continuing education, professional licensure, and specific industry perspectives. The goals of the summit were (1) to gain an improved understanding of the transportation workforce needs of Iowa and the surrounding states and (2) to identify best practices in addressing the workforce development needs. This event had two tracks: one focused on pre-college education and the other focused primarily on college education and practitioners. Attendees provided a good cross-section of the larger transportation industry. From what was learned at the summit, Iowa State University, like other regional hosts, can develop a “profile of needs” for Iowa including specific job categories over specific time horizons. The summit was also successful in identifying best practices in addressing the workforce needs that can be utilized by us and others as potential tools or in a “national-level list of attributes.” Each regional summit has provided some guidance in developing statewide profiles. The collection of best practices or tools from all the regional summits can be shared and applied to address state (or regional) needs profiles to attract, develop, and retain an effective workforce.

The rewards of cooperation: The effects of membership in European regulatory networks

Networks famously epitomize the shift from 'government' to 'governance' as governing structures for exercising control and coordination besides hierarchies and markets. Their distinctive features are their horizontality, the interdependence among member actors and an interactive decision-making style. Networks are expected to increase the problem-solving capacity of political systems in a context of growing social complexity, where political authority is increasingly fragmented across territorial and functional levels. However, very little attention has been given so far to another crucial implication of network governance - that is, the effects of networks on their members. To explore this important question, this article examines the effects of membership in European regulatory networks on two crucial attributes of member agencies, which are in charge of regulating finance, energy, telecommunications and competition: organisational growth and their regulatory powers. Panel analysis applied to data on 118 agencies during a ten-year period and semi-structured interviews provide mixed support regarding the expectation of organisational growth while strongly confirming the positive effect of networks on the increase of the regulatory powers attributed to member agencies.

Proximate basis of the covariation between a melanin-based female ornament and offspring quality.

In contradiction to sexual selection theory, several studies showed that although the expression of melanin-based ornaments is usually under strong genetic control and weakly sensitive to the environment and body condition, they can signal individual quality. Covariation between a melanin-based ornament and phenotypic quality may result from pleiotropic effects of genes involved in the production of melanin pigments. Two categories of genes responsible for variation in melanin production may be relevant, namely those that trigger melanin production (yes or no response) and those that determine the amount of pigments produced. To investigate which of these two hypotheses is the most likely, I reanalysed data collected from barn owls ( Tyto alba). The underparts of this bird vary from immaculate to heavily marked with black spots of varying size. Published cross-fostering experiments have shown that the proportion of the plumage surface covered with black spots, a eumelanin composite trait so-called "plumage spottiness", in females positively covaries with offspring humoral immunocompetence, and negatively with offspring parasite resistance (i.show $132#e. the ability to reduce fecundity of ectoparasites) and fluctuating asymmetry of wing feathers. However, it is unclear which component of plumage spottiness causes these relationships, namely genes responsible for variation in number of spots or in spot diameter. Number of spots reflects variation in the expression of genes triggering the switch from no eumelanin production to production, whereas spot diameter reflects variation in the expression of genes determining the amount of eumelanin produced per spot. In the present study, multiple regression analyses, performed on the same data sets, showed that humoral immunocompetence, parasite resistance and wing fluctuating asymmetry of cross-fostered offspring covary with spot diameter measured in their genetic mother, but not with number of spots. This suggests that genes responsible for variation in the quantity of eumelanin produced per spot are responsible for covariation between a melanin ornament and individual attributes. In contrast, genes responsible for variation in number of black spots may not play a significant role. Covariation between a eumelanin female trait and offspring quality may therefore be due to an indirect effect of melanin production.

The thalamocortical projection systems in primate: an anatomical support for multisensory and sensorimotor interplay.

Multisensory and sensorimotor integrations are usually considered to occur in superior colliculus and cerebral cortex, but few studies proposed the thalamus as being involved in these integrative processes. We investigated whether the organization of the thalamocortical (TC) systems for different modalities partly overlap, representing an anatomical support for multisensory and sensorimotor interplay in thalamus. In 2 macaque monkeys, 6 neuroanatomical tracers were injected in the rostral and caudal auditory cortex, posterior parietal cortex (PE/PEa in area 5), and dorsal and ventral premotor cortical areas (PMd, PMv), demonstrating the existence of overlapping territories of thalamic projections to areas of different modalities (sensory and motor). TC projections, distinct from the ones arising from specific unimodal sensory nuclei, were observed from motor thalamus to PE/PEa or auditory cortex and from sensory thalamus to PMd/PMv. The central lateral nucleus and the mediodorsal nucleus project to all injected areas, but the most significant overlap across modalities was found in the medial pulvinar nucleus. The present results demonstrate the presence of thalamic territories integrating different sensory modalities with motor attributes. Based on the divergent/convergent pattern of TC and corticothalamic projections, 4 distinct mechanisms of multisensory and sensorimotor interplay are proposed.

Calpain 3, the "gatekeeper" of proper sarcomere assembly, turnover and maintenance.

Calpain 3 is a member of the calpain family of calcium-dependent intracellular proteases. Thirteen years ago it was discovered that mutations in calpain 3 (CAPN3) result in an autosomal recessive and progressive form of limb girdle muscular dystrophy called limb girdle muscular dystrophy type 2A. While calpain 3 mRNA is expressed at high levels in muscle and appears to have some role in developmental processes, muscles of patients and mice lacking calpain 3 still form apparently normal muscle during prenatal development; thus, a functional calpain 3 protease is not mandatory for muscle to form in vivo but it is a pre-requisite for muscle to remain healthy. Despite intensive research in this field, the physiological substrates of the calpain 3 protein (hereafter referred to as CAPN3) and its alternatively spliced isoforms remain elusive. The existence of these multiple isoforms complicates the search for the physiological functions of CAPN3 and its pathophysiological role. In this review, we summarize the genetic and biochemical evidence that point to loss of function of the full-length isoform of CAPN3, also known as p94, as the pathogenic isoform. We also argue that its natural substrates must reside in its proximity within the sarcomere where it is stored in an inactive state anchored to titin. We further propose that CAPN3 has many attributes that make it ideally suited as a sensor of sarcomeric integrity and function, involved in its repair and maintenance. Loss of these CAPN3-mediated activities can explain the "progressive" development of muscular dystrophy.

Boron adsorption in soils from the State of São Paulo, Brazil

Boron adsorption was studied in five representative soils (Rhodic Hapludox, Arenic Paleudalf and three Typic Hapludox) from the State of São Paulo, Brazil. Adsorption was higher in the clayey Oxisols, followed by the Alfisol and the coarser Oxisols. Calcium carbonate promoted an increase in the amount of adsorbed boron in all soils, with the most pronounced effect in the coarser-textured Oxisols. High correlation coefficients were found between adsorbed boron and clay and amorphous aluminum oxide contents and specific surface area (r = 0.79, 0.76 and 0.73, respectively, p < 0.01). Clay content, free aluminum oxide, and hot CaCl2 (0.01 mol L-1)-extracted boron explained 93% of the variation of adsorbed boron. Langmuir and Freundlich isotherms fitted well to the adsorbed data, and highest values for maximum boron adsorption were found in clayey soils, which were significantly correlated with contents of total, free and amorphous iron and aluminum oxides, as well with the physical attributes. Ninety four percent of the variation in the maximum adsorption could be related to the free iron content.

Calpain 3, the "gatekeeper" of proper sarcomere assembly, turnover and maintenance.

Calpain 3 is a member of the calpain family of calcium-dependent intracellular proteases. Thirteen years ago it was discovered that mutations in calpain 3 (CAPN3) result in an autosomal recessive and progressive form of limb girdle muscular dystrophy called limb girdle muscular dystrophy type 2A. While calpain 3 mRNA is expressed at high levels in muscle and appears to have some role in developmental processes, muscles of patients and mice lacking calpain 3 still form apparently normal muscle during prenatal development; thus, a functional calpain 3 protease is not mandatory for muscle to form in vivo but it is a pre-requisite for muscle to remain healthy. Despite intensive research in this field, the physiological substrates of the calpain 3 protein (hereafter referred to as CAPN3) and its alternatively spliced isoforms remain elusive. The existence of these multiple isoforms complicates the search for the physiological functions of CAPN3 and its pathophysiological role. In this review, we summarize the genetic and biochemical evidence that point to loss of function of the full-length isoform of CAPN3, also known as p94, as the pathogenic isoform. We also argue that its natural substrates must reside in its proximity within the sarcomere where it is stored in an inactive state anchored to titin. We further propose that CAPN3 has many attributes that make it ideally suited as a sensor of sarcomeric integrity and function, involved in its repair and maintenance. Loss of these CAPN3-mediated activities can explain the "progressive" development of muscular dystrophy.

Mobilizing and evaluating anticancer T cells: pitfalls and solutions.

Immunotherapy is a promising means to fight cancer, prompting a steady increase in clinical trials and correlative laboratory studies in this field. As antitumor T cells play central roles in immunity against malignant diseases, most immunotherapeutic protocols aim to induce and/or strengthen their function. Various treatment strategies have elicited encouraging clinical responses; however, major challenges have been uncovered that should be addressed in order to fully exploit the potential of immunotherapy. Here, we outline pitfalls for the mobilization of antitumor T cells and offer solutions to improve their therapeutic efficacy. We provide a critical perspective on the main methodologies used to characterize T-cell responses to cancer therapies, with a focus on discrepancies between T-cell attributes measured in vitro and protective responses in vivo. This review altogether provides recommendations to optimize the design of future clinical trials and highlights important considerations for the proficient analysis of clinical specimens available for research.

Performance Based Specifications, TR-403, 1998

The goal in highway construction and operation has shifted from method based specifications to specifications relating desired performance attributes to materials, mix designs, and construction methods. Shifting from method specifications to performance based specifications can work as an incentive or disincentive for the contractor to improve performance or extend pavement life. This literature search was directed at a review of existing portland cement concrete performance specification development, and the criteria that can effectively measure pavement performance. The criteria identified in the literature include concrete strength, slab thickness, air content, initial smoothness, water-cement ratio, unit weight, and slump. A description of each criterion, along with the advantages, disadvantages, and test methods for each are identified. Also included are the results from a survey that was sent out to various state, federal, and trade agencies. The responses indicated that 53% currently use or are developing a performance based specification program. Of the 47% of agencies that do not use a performance based specification program, over 34% indicated that they would consider a similar program. The most commonly measured characteristics include thickness, strength, smoothness, and air content. Lastly recommendations and conclusions are made regarding other factors that affect pavement performance and a proposed second phase of the research is suggested. The research team suggests that a regional expert task group be formed to identify performance levels and criteria. The results of that effort will guide the research team in the development of new or revised specifications.