Electrical actuation and readout in a nanoelectromechanical resonator based on a laterally suspended zinc oxide nanowire.

In this paper, we present experimental results describing enhanced readout of the vibratory response of a doubly clamped zinc oxide (ZnO) nanowire employing a purely electrical actuation and detection scheme. The measured response suggests that the piezoelectric and semiconducting properties of ZnO effectively enhance the motional current for electromechanical transduction. For a doubly clamped ZnO nanowire resonator with radius ~10 nm and length ~1.91 µm, a resonant frequency around 21.4 MHz is observed with a quality factor (Q) of ~358 in vacuum. A comparison with the Q obtained in air (~242) shows that these nano-scale devices may be operated in fluid as viscous damping is less significant at these length scales. Additionally, the suspended nanowire bridges show field effect transistor (FET) characteristics when the underlying silicon substrate is used as a gate electrode or using a lithographically patterned in-plane gate electrode. Moreover, the Young's modulus of ZnO nanowires is extracted from a static bending test performed on a nanowire cantilever using an AFM and the value is compared to that obtained from resonant frequency measurements of electrically addressed clamped–clamped beam nanowire resonators.

Emergency department crowding: prioritising quantified crowding measures using a Delphi study.

AimsEmergency department (ED) crowding has been associated with a number of negative health outcomes, including unnecessary deaths, increased waiting times and a decrease in care quality. Despite the seriousness of this issue, there is little agreement on appropriate crowding measures to assess crowding effects on ED operations. The objective of this study was to prioritise a list of quantified crowding measures that would assess the current state of a department.MethodsA three round Delphi study was conducted via email and an Internet based survey tool. The panel consisted of 40 professionals who had exposure to and expertise in crowding. Participants submitted quantified crowding measures which, through three rounds, were evaluated and ranked to assess participant agreement for inclusion.ResultsThe panel identified 27 measures of which eight (29.6%) reached consensus at the end of the study. These measures comprised: (1) ability of ambulances to offload; (2) patients who leave without being seen or treated; (3) time until triage; (4) ED occupancy rate; (5) patients' total length of stay in the ED; (6) time to see a physician; (7) ED boarding time; and (8) number of patients boarding in the ED.ConclusionsThis study resulted in the identification of eight quantified crowding measures, which present a comprehensive view of how crowding is affecting ED operations, and highlighted areas of concern. These quantified measures have the potential to make a considerable contribution to decision making by ED management and to provide a basis for learning across different departments.

Effect of gate dielectric scaling in nanometer scale vertical thin film transistors

A short channel vertical thin film transistor (VTFT) with 30 nm SiN x gate dielectric is reported for low voltage, high-resolution active matrix applications. The device demonstrates an ON/OFF current ratio as high as 10 9, leakage current in the fA range, and a sub-threshold slope steeper than 0.23 V/dec exhibiting a marked improvement with scaling of the gate dielectric thickness. © 2011 American Institute of Physics.

The intelligent product driven supply chain

Establishing connectivity of products with real-time information about themselves can at one level provide accurate data, and at another, allow products to assess and influence their own destiny. In this way, the specification for an intelligent product is being built - one whose information content is permanently bound to its material content. This paper explores the impact of such development on supply chains, contrasting between simple and complex product supply chains. The Auto-ID project is on track to enable such connectivity between products and information using a single, open-standard, data repository for storage and retrieval of product information. The potential impact on the design and management of supply chains is immense. This paper provides an introduction to of some of these changes, demonstrating that by enabling intelligent products, Auto ID systems will be instrumental in driving future supply chains. The paper also identifies specific application areas for this technology in the product supply chain.

竹叶青(Trimeresurus stejnegeri)蛇毒5^-核苷酸酶对血小板聚集功能的抑制机制研究

竹叶青蛇毒中分离的5^-核苷酸酶能抑制ADP、AA、TMVA、凝血酶诱导的血小板聚集,且对ADP诱导的血小板聚集有明显的解聚作用。其抑制率与剂量增加成正比。该酶在抑制AA和TMVA诱导的血小板聚集的同时,对于血小板中5-羟色胺(5-HT)释放亦有明显抑制,抑制率同样与剂量相关,不能抑制TXB_(2)的生成。

Design methodology for composite structures: A small low air-speed wind turbine blade case study

A small low air-speed wind turbine blade case study is used to demonstrate the effectiveness of a materials and design selection methodology described by Monroy Aceves et al. (2008) [24] for composite structures. The blade structure comprises a shell of uniform thickness and a unidirectional reinforcement. The shell outer geometry is fixed by aerodynamic considerations. A wide range of lay-ups are considered for the shell and reinforcement. Structural analysis is undertaken using the finite element method. Results are incorporated into a database for analysis using material selection software. A graphical selection stage is used to identify the lightest blade meeting appropriate design constraints. The proposed solution satisfies the design requirements and improves on the prototype benchmark by reducing the mass by almost 50%. The flexibility of the selection software in allowing identification of trends in the results and modifications to the selection criteria is demonstrated. Introducing a safety factor of two on the material failure stresses increases the mass by only 11%. The case study demonstrates that the proposed design methodology is useful in preliminary design where a very wide range of cases should be considered using relatively simple analysis. © 2011 Elsevier Ltd.

The morphology of decorated amyloid fibers is controlled by the conformation and position of the displayed protein.

Self-assembled structures capable of mediating electron transfer are an attractive scientific and technological goal. Therefore, systematic variants of SH3-Cytochrome b(562) fusion proteins were designed to make amyloid fibers displaying heme-b(562) electron transfer complexes. TEM and AFM data show that fiber morphology responds systematically to placement of b(562) within the fusion proteins. UV-vis spectroscopy shows that, for the fusion proteins under test, only half the fiber-borne b(562) binds heme with high affinity. Cofactor binding also improves the AFM imaging properties and changes the fiber morphology through changes in cytochrome conformation. Systematic observations and measurements of fiber geometry suggest that longitudinal registry of subfilaments within the fiber, mediated by the interaction and conformation of the displayed proteins and their interaction with surfaces, gives rise to the observed morphologies, including defects and kinks. Of most interest is the role of small molecule modulation of fiber structure and mechanical stability. A minimum complexity model is proposed to capture and explain the fiber morphology in the light of these results. Understanding the complex interplay between these factors will enable a fiber design that supports longitudinal electron transfer.

FEEDING AND VOCAL BEHAVIORS OF BLACK GIBBONS (HYLOBATES-CONCOLOR) IN YUNNAN - A PRELIMINARY-STUDY

Feeding and vocal behaviours of wild black gibbons (Hylobates concolor) were observed from 1987 to 1989 in south-western Yunnan, notably H. concolor jingdongensis at Mt. Wuliang (24-degrees 18-42'N, 100-degrees 30-50'E) in the early spring of 1989. 12 plant species were observed to have been eaten by the gibbons; these included tree species, lianas and epiphytes. Approximately 21 % of feeding time was devoted to eating fruits, 61 % to leaf buds and shoots, 7 % to flowers and 11 % to leaves. The gibbons preferred fruits to leaves even though they commonly ate leaves. In this study, the morning songs (duet and solo), reponsive (territorial) songs, alarm calls and communication calls were recorded. The gibbons sang their morning songs mainly in the early morning, with a single bout lasting more than 10 min on average. The singing of a group would trigger other groups, and all groups in an area tended to sing sequentially. The morning duet song bout was dominated by an adult male. The male emitted booms, aa notes, early multimodulated figures, intermediate multimodulated figures and codas, the latter occurring only in duets following the female's great call. The female uttered great calls and abortive great calls. The subadults or juveniles also took part in the morning songs. Lone males were heard to utter solos which lasted longer than the duets of the pairs.

A microfluidic device for high density hydrodynamic cell trapping, growth and super-resolution imaging

Super-Resolution imaging techniques such as Fluorescent Photo-Activation Localisation Microscopy (FPALM) have created a powerful new toolkit for investigating living cells, however a simple platform for growing, trapping, holding and controlling the cells is needed before the approach can become truly widespread. We present a microfluidic device formed in polydimethylsiloxane (PDMS) with a fluidic design which traps cells in a high-density array of wells and holds them very still throughout the life cycle, using hydrodynamic forces only. The device meets or exceeds all the necessary criteria for FPALM imaging of Schizosaccharomyces pombe and is designed to remain flexible, robust and easy to use. © 2011 IEEE.

Murine MyaK, a member of a family of yeast YAK1-related genes, is highly expressed in hormonally modulated epithelia in the reproductive system and in the embryonic central nervous system

We have cloned a mouse homologue (designated Myak) of the yeast protein kinase YAK1. The 1210 aa open reading frame contains a putative protein kinase domain, nuclear localization sequences and PEST sequences. Myak appears to be a member of a growing family of YAK1-related genes that include Drosophila and human Minibrain as well as a recently identified rat gene ANPK that encode a steroid hormone receptor interacting protein. RNA blot analysis revealed that Myak is expressed at low levels ubiquitously but at high levels in reproductive tissues, including testis, epididymis, ovary, uterus, and mammary gland, as well as in brain and kidney. In situ hybridization analysis on selected tissues revealed that Myak is particularly abundant in the hormonally modulated epithelia of the epididymis, mammary gland, and uterus, in round spermatids in the testis, and in the corpora lutea in the ovary, Myak is also highly expressed in the aqueduct of the adult brain and in the brain and spinal cord of day 12.5 embryos, Mol. Reprod. Dev. 55:372-378, 2000. (C) 2000 Wiley-Liss, Inc.

Advanced applications of a computational design synthesis method

From modelling to manufacturing, computers have increasingly become partners in the design process, helping automate many phases once carried out by hand. In the creative phase, computational synthesis methods aim at facilitating designers' task through the automated generation of optimally directed design alternatives. Nevertheless, applications of these techniques are mainly academic and industrial design practice is still far from applying them routinely. This is due to the complex nature of many design tasks and to the difficulty of developing synthesis methods that can be easily adapted to multiple case studies and automated simulation. This work stems from the analysis of implementation issues and obstacles to the widespread use of these tools. The research investigates the possibility to remove these obstacles through the application of a novel technique to complex design tasks. The ability of this technique to scale-up without sacrificing accuracy is demonstrated. The successful results confirm the possibility to use synthesis methods in complex design tasks and spread their commercial and industrial application.