Fishing gear survey of Kainji Lake, northern Nigeria, 1996

A survey was carried out in September 1996 alongside the annual frame survey of Kainji Lake, Nigeria. As in the previous surveys, there were 6 main fishing gear types in use on the lake, which included gill nets, drift nets, beach seines, cast nets, longlines (baited and foul hooking) acid fishing traps. A total of 813 canoes were sampled. The canoe lengths were similar to the previous gear surveys. Altogether 466 gill nets were measured. They had an average length of 149 m, and were mostly bottom set. Of the gill nets measured 68% had a mesh size below 3 inches the minimum mesh size allowable according to the Niger and Kebbi State Fisheries Edict, 1996. Of concern was the large increase in the number of 1 inch meshed nets recorded on the lake. Drift nets had a mean length of 74 m. A total of 88% of all drift nets measured had a mesh size below 2.5 inches, the minimum mesh size stipulated in the State Edict. A total number of 102 beach seines were sampled with a mean length of 110 m, the mesh size in use on the lake remained as 0.1 inches under the Edict beach seines are banned from fishing in Kainji Lake. The decline in the lengths of the beach seines (and therefore catch rates) recorded since l995 was encouraging in the light of the destructive nature of these nets. A total of 30 cast nets were sampled, they had a mean diameter of 9.8 and a mean mesh size of 1.9 inches. All the nets had a hanging ratio of 0.5. Of the cast nets measured 40% had a mesh size below the minimum size of 2 inches recommended by the State Fisheries Edicts. Of concern was the continued rise in the number of gill nets with mesh sizes less than 2 inches. There were 2 types of longlines in operation on the lake. The baited and the foul hooking longlines. They were mostly bottom set and the hook size nos. 12-14 (Kirby sea hook) were predominant. Two types of fishing traps were identified, one was covered with a mesh of thin cane, one with netting material. The fishing traps had a mean height of 0.8 m and a mean width at the vase of 0.53 m. The mean mesh size used was 0.86 inches. Citharinus was reported as the most targeted of all fish species on the lake. Synodontis membranaceous was also targeted by most gears especially the smaller meshed nets. Labeo and Tilapia were low on the list of targeted species but their incidence remains high in the catches. (PDF contains 27 pages)

Embryogenesis of Heterobranchus longifilis (Curvier and Valenciennes, 1840)

Studies on development of H. longifilis (Curvier and Valenciennes, 1840) were conducted at a temperature of 25EC ( 1Ec) in aquaria tanks continuous development were monitored with the use of wild Heerbrugy photomacroscope and length of yolk and larva were monitored using Stereo Olympus microscope with ocular micrometer. The division into animal and vegetal poles was observed 22 minutes after activation. The first cleavage occurred 65 minutes after activation while the second division which was perpendicular to the first line of division occurred 74 minutes after activation. This was quickly followed by the third and fourth cleavage at 80th and 82nd minutes after activation respectively. Morular stage was reached at 4 hours 20 minutes with formation of optic bud at 14 hours 35 minutes. (DBO) Developing embryo hatched after 27 hours of activation at a mean length of 6.63 and mean yolk length of 2.17. Yolk size decrease at an average rate of 38.5 % till the 5th day of total absorption. Growth of larvae proceeded faster in tail-anus region than in anus-snout portion of the body. The rate of yolk absorption and larva development (survival) as monitored in this work gives important information in Research and development programme for H. longifilis larva - an important aspect of Research development and implementation of appropriate technologies in small scale fisheries

Serie Vídeos tutoriales para fonética. Video 8. Praat: doing phonetics by computer (Parte 4: Propiedades acústicas de los sonidos del habla observables en espectrogramas)

Esta es una colección de 10 vídeos tutoriales que pueden ser empleados como material educativo en los cursos de fonética básica en el ámbito universitario. Los vídeos 1-3 tratan aspectos relacionados con la grabación: el tipo de micrófonos que se emplean, las clases de espacios en las que se suelen llevar a cabo la captura de señales de audio y las grabadoras que se suelen emplear. El vídeo 4 explora técnicas de captura y observación de datos de flujo y presión en fonética aerodinámica. Los vídeos 5-10 presentan información sobre los principales usos que se le brindan al programa Praat (Boersma y Weenink, 2014) en los estudios actuales de fonética acústica, desde la clase de información sobre modos de articulación de las consonantes que se puede identificar en oscilogramas hasta la creación de señales sonoras sintetizadas por medio de unos procedimientos que tiene el programa para tal propósito, los cuales son susceptibles de ser empleados en experimentos de percepción auditiva.

Attempts to Synthesize Cyclic Group 8 Metallaesters

In studying a proposed carbon monoxide reduction scheme an attempt has been made to synthesize bifunctional group 8 transition metal carbonyl complexes containing intramolecular nucleophiles. The incorporation of alkoxide nucleophiles through cyclopentadienyl ligands was hoped to encourage attack on carbonyl ligands thereby forming cyclic metallaesters. The attempts to synthesize these substituted cyclopentadienyl group 8 transition metal complexes have thus far been unsuccessful.

Synthesis of (±)-7,8-epoxy-4-basmen-6-one by a transannular cyclization strategy

The first synthesis of the cembranoid natural product (±)-7,8-epoxy-4-basmen-6- one (1) is described. Key steps of the synthetic route include the cationic cyclization of the acid chloride from 15 to provide the macrocycle 16, and the photochemical transannular radical cyclization of the ester 41 to form the tricyclic product 50. Product 50 was transformed into 1 in ten steps. Transition-state molecular modeling studies were found to provide accurate predictions of the structural and stereochemical outcomes of cyclization reactions explored experimentally in the development of the synthetic route to 1. These investigations should prove valuable in the development of transannular cyclization as a strategy for synthetic simplification.

Etapa sentikorraren lehenengo fasearen (8-12 urte) garrantzia keinu teknikoak barneratzerako surfean

8-12 urte bitarteko umeen surf entrenamendu prozesua nola planifikatu behar da, murgilduta dauden etapa sentikorra kontuan hartuz.

Exploration of new drug delivery pathways: I. Mechanism of folate uptake in cultured human cells. II. Role of nuclear localization signal peptides in the delivery of oligonucleotide into reconstituted nuclei

The roles of the folate receptor and an anion carrier in the uptake of 5- methyltetrahydrofolate (5-MeH_4folate) were studied in cultured human (KB) cells using radioactive 5-MeH_4folate. Binding of the 5-MeH_4folate was inhibited by folic acid, but not by probenecid, an anion carrier inhibitor. The internalization of 5-MeH_4folate was inhibited by low temperature, folic acid, probenecid and methotrexate. Prolonged incubation of cells in the presence of high concentrations of probenecid appeared to inhibit endocytosis of folatereceptors as well as the anion carrier. The V_(max) and K_M values for the carrier were 8.65 ± 0.55 pmol/min/mg cell protein and 3.74 ± 0.54µM, respectively. The transport of 5-MeH4folate was competitively inhibited by folic acid, probenecid and methotrexate. The carrier dissociation constants for folic acid, probenecid and methotreate were 641 µM, 2.23 mM and 13.8 µM, respectively. Kinetic analysis suggests that 5-MeH_4folate at physiological concentration is transported through an anion carrier with the characteristics of the reduced-folate carrier after 5-MeH_4folate is endocytosed by folate receptors in KB cells. Our data with KB cells suggest that folate receptors and probenecid-sensitive carriers work in tandem to transport 5-MeH_4folate to the cytoplasm of cells, based upon the assumption that 1 mM probenecid does not interfere with the acidification of the vesicle where the folate receptors are endocytosed.

Oligodeoxynucleotides designed to hybridize to specific mRNA sequences (antisense oligonucleotides) or double stranded DNA sequences have been used to inhibit the synthesis of a number of cellular and viral proteins (Crooke, S. T. (1993) FASEB J. 7, 533-539; Carter, G. and Lemoine, N. R. (1993) Br. J. Cacer 67, 869-876; Stein, C. A. and cohen, J. S. (1988) Cancer Res. 48, 2659-2668). However, the distribution of the delivered oligonucleotides in the cell, i.e., in the cytoplasm or in the nucleus has not been clearly defined. We studied the kinetics of oligonucleotide transport into the cell nucleus using reconstituted cell nuclei as a model system. We present evidences here that oligonucleotides can freely diffuse into reconstituted nuclei. Our results are consistent with the reports by Leonetti et al. (Proc. Natl. Acad. Sci. USA, Vol. 88, pp. 2702-2706, April 1991), which were published while we were carrying this research independently. We also investigated whether a synthetic nuclear localization signal (NLS) peptide of SV40 T antigen could be used for the nuclear targeting of oligonucleotides. We synthesized a nuclear localization signal peptide-conjugated oligonucleotide to see if a nuclear localization signal peptide can enhance the uptake of oligonucleotides into reconstituted nuclei of Xenopus. Uptake of the NLS peptide-conjugated oligonucleotide was comparable to the control oligonucleotide at similar concentrations, suggesting that the NLS signal peptide does not significantly enhance the nuclear accumulation of oligonucleotides. This result is probably due to the small size of the oligonucleotide.

Energy transfer between silicon-oxygen-related defects and Yb3+ in transparent glass ceramics containing Ba2TiSi2O 8 nanocrystals

We report on the conversion of near-ultraviolet radiation of 250-350 nm into near-infrared emission of 970-1100 nm in Yb3+-doped transparent glass ceramics containing Ba2TiSi2O8 nanocrystals due to the energy transfer from the silicon-oxygen-related defects to Yb3+ ions. Efficient Yb3+ emission (F-2(5/2)-> F-2(7/2)) was detected under the excitation of defects absorption at 314 nm. The occurrence of energy transfer is proven by both steady state and time-resolved emission spectra, respectively, at 15 K. The Yb2O3 concentration dependent energy transfer efficiency has also been evaluated, and the maximum value is 65% for 8 mol % Yb2O3 doped glass ceramic. These materials are promising for the enhancement of photovoltaic conversion efficiency of silicon solar cells via spectra modification.

1. Astronomical photometry at wavelengths of 8.5, 10.5, and 11.6 µm. 2. Infrared emission from asteroids at wavelengths of 8.5, 10.5, and 11.6 µm

The purpose of this thesis is to present new observations of thermal-infrared radiation from asteroids. Stellar photometry was performed to provide standards for comparison with the asteroid data. The details of the photometry and the data reduction are discussed in Part 1. A system of standard stars is derived for wavelengths of 8.5, 10.5 and 11.6 µm and a new calibration is adopted. Sources of error are evaluated and comparisons are made with the data of other observers.

The observations and analysis of the thermal-emission observations of asteroids are presented in Part 2. Thermal-emission lightcurve and phase effect data are considered. Special color diagrams are introduced to display the observational data. These diagrams are free of any model-dependent assumptions and show that asteroids differ in their surface properties.

On the basis of photometric models, (4) Vesta is thought to have a bolometric Bond albedo of about 0.1, an emissivity greater than 0.7 and a true radius that is close to the model value of 300^(+50)_(-30)km. Model albedos and model radii are given for asteroids 1, 2, 4, 5, 6, 7, 15, 19, 20, 27, 39, 44, 68, 80, 324 and 674. The asteroid (324) Bamberga is extremely dark with a model (~bolometric Bond) albedo in the 0.01 - 0.02 range, which is thought to be the lowest albedo yet measured for any solar-system body. The crucial question about such low-albedo asteroids is their number and the distribution of their orbits.

Rate and Microstructure Effects on the Dynamics of Carbon Nanotube Foams

Soft hierarchical materials often present unique functional properties that are sensitive to the geometry and organization of their micro- and nano-structural features across different lengthscales. Carbon Nanotube (CNT) foams are hierarchical materials with fibrous morphology that are known for their remarkable physical, chemical and electrical properties. Their complex microstructure has led them to exhibit intriguing mechanical responses at different length-scales and in different loading regimes. Even though these materials have been studied for mechanical behavior over the past few years, their response at high-rate finite deformations and the influence of their microstructure on bulk mechanical behavior and energy dissipative characteristics remain elusive.

In this dissertation, we study the response of aligned CNT foams at the high strain-rate regime of 10² - 10⁴ s^-1. We investigate their bulk dynamic response and the fundamental deformation mechanisms at different lengthscales, and correlate them to the microstructural characteristics of the foams. We develop an experimental platform, with which to study the mechanics of CNT foams in high-rate deformations, that includes direct measurements of the strain and transmitted forces, and allows for a full field visualization of the sample’s deformation through high-speed microscopy.

We synthesize various CNT foams (e.g., vertically aligned CNT (VACNT) foams, helical CNT foams, micro-architectured VACNT foams and VACNT foams with microscale heterogeneities) and show that the bulk functional properties of these materials are highly tunable either by tailoring their microstructure during synthesis or by designing micro-architectures that exploit the principles of structural mechanics. We also develop numerical models to describe the bulk dynamic response using multiscale mass-spring models and identify the mechanical properties at length scales that are smaller than the sample height.

The ability to control the geometry of microstructural features, and their local interactions, allows the creation of novel hierarchical materials with desired functional properties. The fundamental understanding provided by this work on the key structure-function relations that govern the bulk response of CNT foams can be extended to other fibrous, soft and hierarchical materials. The findings can be used to design materials with tailored properties for different engineering applications, like vibration damping, impact mitigation and packaging.

Extraction of CP Properties of the H(125) Boson Discovered in Proton-Proton Collisions at sqrt(s) = 7 and 8 TeV with the CMS Detector at the LHC

In this thesis we build a novel analysis framework to perform the direct extraction of all possible effective Higgs boson couplings to the neutral electroweak gauge bosons in the H → ZZ^(*) → 4l channel also referred to as the golden channel. We use analytic expressions of the full decay differential cross sections for the H → VV' → 4l process, and the dominant irreducible standard model qq ̄ → 4l background where 4l = 2e2μ,4e,4μ. Detector effects are included through an explicit convolution of these analytic expressions with transfer functions that model the detector responses as well as acceptance and efficiency effects. Using the full set of decay observables, we construct an unbinned 8-dimensional detector level likelihood function which is con- tinuous in the effective couplings, and includes systematics. All potential anomalous couplings of HVV' where V = Z,γ are considered, allowing for general CP even/odd admixtures and any possible phases. We measure the CP-odd mixing between the tree-level HZZ coupling and higher order CP-odd couplings to be compatible with zero, and in the range [−0.40, 0.43], and the mixing between HZZ tree-level coupling and higher order CP -even coupling to be in the ranges [−0.66, −0.57] ∪ [−0.15, 1.00]; namely compatible with a standard model Higgs. We discuss the expected precision in determining the various HVV' couplings in future LHC runs. A powerful and at first glance surprising prediction of the analysis is that with 100-400 fb^-1, the golden channel will be able to start probing the couplings of the Higgs boson to diphotons in the 4l channel. We discuss the implications and further optimization of the methods for the next LHC runs.

Influência do sistema de cimentação e do modo de ativação na resistência ao push-out de pinos de fibra de vidro

O objetivo deste estudo foi avaliar a influência do tipo de sistema de cimentação (condicionamento ácido total ou autoadesivo), do modo de ativação (autoativado ou dual), do terço do conduto radicular (cervical, médio ou apical) e da espessura do filme de cimento sobre a resistência de união de pinos de fibra de vidro cimentados em dentes humanos. Quarenta raízes foram incluídas em resina epóxi, submetidas a tratamento endodôntico e obturadas com guta percha e cimento endodôntico sem eugenol. Decorridos sete dias, os condutos foram preparados a uma profundidade de 10mm com brocas padronizadas do sistema dos pinos de fibra (WhitePost DC #2) e aleatoriamente divididos em 4 grupos, conforme o sistema de cimentação e o modo de ativação: (G1) RelyX ARC/Adper Scotchbond Multi-Purpose Plus (condicionamento ácido total), ativação dual, (G2) RelyX ARC/Adper Scotchbond Multi-Purpose Plus, autoativado, (G3) RelyX U100 (autoadesivo), dual e (G4) RelyX U100, autoativado. Após uma semana, cada raiz foi seccionada em máquina de corte, originando 6 fatias de 1 mm de espessura (n=60). Antes do ensaio de push-out cada fatia foi fotografada em ambas as faces, para determinação do raio dos pinos e da espessura do filme de cimento. Após o ensaio mecânico, novas imagens foram capturadas para determinação do modo de falha. Para automatizar a determinação da espessura de cimento, foi desenvolvida uma macro no software KS 400. Os dados foram estatisticamente analisados com ANOVA 3 fatores (resistência de união) e teste de Kruskall-Wallis (espessura do cimento). Comparações múltiplas foram realizadas com o teste Student-Newman-Keuls. Análise de regressão, modelo linear, foi empregada para verificar a correlação entre espessura do cimento e resistência de união. Todos os testes foram aplicados com α = 0,05. O fator cimento exerceu influência significativa para a resistência de união (p = 0,0402): o RelyX U100 apresentou a maior média. A ativação dual elevou os valores de resistência de união em comparação ao modo quimicamente ativado (p < 0,0001). Houve diferenças significantes entre os grupos, sendo G1 (22,4 4,0 MPa) > G3 (20,4 3,6 MPa) > G4 (17,8 5,2 MPa) > G2 (13,5 4,3 MPa). O terço do conduto não exerceu influência significativa sobre a resistência adesiva (p = 0,4749). As espessuras dos filmes de cimento foram estatisticamente diferentes nos diferentes terços: cervical (102 45 m) > médio (75 29 m) > apical (52 28m). Não foi observada forte correlação entre os valores de espessura e os de resistência ao push-out (r = - 0,2016, p = 0,0033). O tipo de falha predominante foi a mista, exceto para o G2, que apresentou 74% das falhas na interface cimento-pino. Dessa forma, o cimento autoadesivo apresentou melhor desempenho que o convencional, e ambos os sistemas duais, sobretudo o RelyX ARC, apresentaram dependência da fotoativação para atingirem maiores valores de resistência de união.

Combinação de drogas para o tratamento da Hipertensão Arterial: estratégia para um melhor controle pressórico

A taxa de controle da hipertensão arterial permanece subótima apesar dos amplos e intensos programas institucionais e o número das novas medicações. A combinação de drogas de diferentes mecanismos de ação vem se tornando uma alternativa para aumentar a redução na pressão arterial (PA) e aumentar seu controle, aumentar aderência ao tratamento e reduzir os eventos adversos. Um estudo fatorial 4X4 foi desenhado para determinar a eficácia e a segurança de telmisartana (T) mais anlodipino (A) em pacientes hipertensos estágios I e II. Pacientes hipertensos adultos (N=1461) estágios I e II (pressão arterial basal 153,212,1 ⁄101,74,3 mm Hg) foram randomizados para 1 de 16 grupos de tratamento com T 0, 20, 40, 80 mg e A 0, 2.5, 5, 10 mg por oito semanas. A maior redução na média das pressões sistólica e diastólica foram observadas com T 80 mg mais A10 mg (- 26,4 ⁄20,1 mm Hg; p<0,05 comparados com as monoterapias). A taxa de controle da PA foi também maior no grupo T 80mg mais A 10mg (76,5% [controle total] e 85,3% [controle da PA diastólica ]), e taxa de controle da PA >90% com esta combinação. O edema periférico maleolar foi o evento adverso mais frequente e ocorreu no grupo A 10mg (17,8%), porém, esta taxa foi marcadamente menor quando A foi usada associada com T: 11,4% (T20+A10), 6,2% (T40+ A10), e 11,3% (T80+A10). Um subestudo utilizando a monitorização ambulatorial da pressão arterial (MAPA) foi realizado na fase basal e após oito semanas de tratamento. A maior redução média das pressões nas 24 horas a partir do período basal foi registrada para a combinação de telmisartana 80 mg e anlodipino 10 mg e encontrou-se queda de 22,4/14,6 mmHg, de 11,9/6,9 mmHg para anlodipino 10 mg monoterapia e de 11,0/6,9 mmHg para telmisartana 80 mg (p< 0,001). Além disso, resultados relevantes foram também constatados numa análise post hoc de subgrupos incluindo idosos, obesos, diabéticos tipo 2 e hipertensão sistólica. A resposta anti-hipertensiva da combinação foi semelhante, independente de qualquer característica de cada subgrupo. Estes dados demonstram que telmisartana e anlodipino em combinação oferecem substancial redução e controle nas 24 horas superior às respectivas monoterapias em hipertensos estágios I e II.

'Fa Tsai', a Chinese edible Nostoc in market. [Translation from: Bulletin of the Japanese Society of Phycology 8 124-126, 1960. ]

The Nostoc 'Fa Tsai' is sometimes seen in Chinese cooking materials stores. It is investigated what 'Fa Tsai' consists of and where it originates.

Keys to the larvae of the species of the genera Diamesa, Eukiefferiella, Orthocladius, Cricotopus, Psectrocladius and Chaetocladius. [Translation from: Larvae and pupae of midges of the subfamily Orthocladiinae of the fauna of the USSR (Diptera, Chironomidae = Tendipedidae) (ed. V.Y. Pankratova) p76-8,151-152,173-174,188-189. Leningrad, Nauka, 1970. ]

Eudiaptomus vulgaris Schmeil is the most abundant copepod in Lake Maggiore and forms also, in respect to other entomostraca, the most important element, through its average biomass and because it is fairly numerous throughout the year. Plankton samples collected in a systematic and quantitative way, gave the opportunity to study some aspects of the dynamics of the population of this copepod, in safety in view of the uncertainty which in this kind of study can ensue when samples are taken only at a single station - in consequence of the changes in size of population between different water masses. The results of the biometrical observations are of the population of Eudiaptomus vulgaris is presented.