Performance evaluation of 3D computer vision techniques

This work presents the implementation and comparison of three different techniques of three-dimensional computer vision as follows: • Stereo vision - correlation between two 2D images • Sensorial fusion - use of different sensors: camera 2D + ultrasound sensor (1D); • Structured light The computer vision techniques herein presented took into consideration the following characteristics: • Computational effort ( elapsed time for obtain the 3D information); • Influence of environmental conditions (noise due to a non uniform lighting, overlighting and shades); • The cost of the infrastructure for each technique; • Analysis of uncertainties, precision and accuracy. The option of using the Matlab software, version 5.1, for algorithm implementation of the three techniques was due to the simplicity of their commands, programming and debugging. Besides, this software is well known and used by the academic community, allowing the results of this work to be obtained and verified. Examples of three-dimensional vision applied to robotic assembling tasks ("pick-and-place") are presented.

Mapping the Value Network Potential in Cross-sector Collaboration: Case welfare Services for Elderly in Finland

Value network has been studied greatly in the academic research, but a tool for value network mapping is missing. The objective of this study was to design a tool (process) for value network mapping in cross-sector collaboration. Furthermore, the study addressed a future perspective of collaboration, aiming to map the value network potential. During the study was investigated and pondered how to get the full potential of collaboration, by creating new value in collaboration process. These actions are parts of mapping process proposed in the study. The implementation and testing of the mapping process were realized through a case study of cross-sector collaboration in welfare services for elderly in the Eastern Finland. Key representatives in elderly care from public, private and third sectors were interviewed and a workshop with experts from every sector was also conducted in this regard. The value network mapping process designed in this study consists of specific steps that help managers and experts to understand how to get a complex value network map and how to enhance it. Furthermore, it make easier the understanding of how new value can be created in collaboration process. The map can be used in order to motivate participants to be engaged with responsibility in collaboration and to be fully committed in their interactions. It can be also used as a motivator tool for those organizations that intend to engage in collaboration process. Additionally, value network map is a starting point in many value network analyses. Furthermore, the enhanced value network map can be used as a performance measurement tool in cross-sector collaboration.

Design Space Exploration for MPSoC Architectures

Multiprocessor system-on-chip (MPSoC) designs utilize the available technology and communication architectures to meet the requirements of the upcoming applications. In MPSoC, the communication platform is both the key enabler, as well as the key differentiator for realizing efficient MPSoCs. It provides product differentiation to meet a diverse, multi-dimensional set of design constraints, including performance, power, energy, reconfigurability, scalability, cost, reliability and time-to-market. The communication resources of a single interconnection platform cannot be fully utilized by all kind of applications, such as the availability of higher communication bandwidth for computation but not data intensive applications is often unfeasible in the practical implementation. This thesis aims to perform the architecture-level design space exploration towards efficient and scalable resource utilization for MPSoC communication architecture. In order to meet the performance requirements within the design constraints, careful selection of MPSoC communication platform, resource aware partitioning and mapping of the application play important role. To enhance the utilization of communication resources, variety of techniques such as resource sharing, multicast to avoid re-transmission of identical data, and adaptive routing can be used. For implementation, these techniques should be customized according to the platform architecture. To address the resource utilization of MPSoC communication platforms, variety of architectures with different design parameters and performance levels, namely Segmented bus (SegBus), Network-on-Chip (NoC) and Three-Dimensional NoC (3D-NoC), are selected. Average packet latency and power consumption are the evaluation parameters for the proposed techniques. In conventional computing architectures, fault on a component makes the connected fault-free components inoperative. Resource sharing approach can utilize the fault-free components to retain the system performance by reducing the impact of faults. Design space exploration also guides to narrow down the selection of MPSoC architecture, which can meet the performance requirements with design constraints.

Kattilan ja kanaviston eristykset 3D-laitossuunnitteluohjelmassa

Työn tavoitteena oli kehittää kanavistojen ja kattilan eristyksien mallintamista 3D-laitossuunitteluohjelmassa sekä siitä saatavia materiaalilistoja. Kanavistojen eristeitä kuvastavaa geometriaa muokattiin vastaamaan eristyksen todellista tilanvarausta. Kattilan eristyksen mallintaminen on aikaisemmin jouduttu tekemään manuaalisesti, työssä kehitettiin työkalu, jonka avulla eristysten materiaalitiedot ja oikeat tilanvaraukset saadaan lisättyä 3D-malliin. Kaikkia eristyksen mallintamista ei kuitenkaan pystytä mielekkäästi toteuttamaan automaattisesti työkalujen avulla, näitä kohteita ovat tukikehikkorakenteet kuten kattilan vinttikehikko. Lisäksi täytyi selvittää, mitä tietoja eristyksien materiaalimäärälistoille vaaditaan, ja kuinka nämä tiedot saataisiin listoihin mukaan. Jotta kaikki eristettävät kohteet saadaan tuotettaviin materiaalilistoihin, on ohjelmaan lisättävä käytettäväksi uusia komponentteja. Näitä ovat uudet kanavistojen osat sekä muun muassa venturit ja huoltoluukut kanavistoille. Kattilaan asennettavat laitteet kuten näkölasit ja polttimet vaativat tukirakenteen, joka samalla toimii kotelona putkistojen taivutuksille. Näitä kohteita on aikaisemmin tuotu vanhoista projekteista tai ne on tehty suunnittelijan toimesta uusiksi. Työssä esitettiin uusi tapa mallintaa kattilan pinnat, jolloin niihin voidaan liittää koteloita erillisestä komponenttikirjastosta. Kanavistojen eristyksien materiaalimäärälistojen tuottaminen suoraan ohjelmasta auto-matisoitiin. Kattilan ja siihen liittyvien eristyskehysrakenteiden listojen tuotanto kuitenkin vaatii yhteisten toimintamallien kehittämistä. Tämän työn uudet menetelmät mahdollistavat yhä uusien työkalujen kehittämisen, esimerkiksi automaattisen eristysten teknisten piirustusten kuvatuotannon tulevaisuudessa.

Mittakuvatoiminnan asiakaslähtöisyyden kehittäminen

Tämän diplomityön tarkoituksena oli selvittää tämän päivän mittakuviin liittyviä asiakastarpeita Metso Automaation Virtauksensäätöratkaisut -liiketoimintalinjassa. Mittakuvat ovat tärkeä osa asiakkaalle tuotteen yhteydessä toimitettavaa dokumenttipakettia, joihin on kohdistettu yhä enemmän vaatimuksia viime vuosien aikana. Tutkimuksen keskeisenä tavoitteena oli ymmärtää 3D-mittakuvien merkitys Metson liiketoiminnassa, tunnistaa tämän päivän mittakuviin liittyvät asiakastarpeet, sekä luoda tunnistettujen asiakastarpeiden pohjalta kehittämissuunnitelma mittakuvatoiminnalle. Työssä toteutettiin teoreettinen kirjallisuusselvitys 3D-mallintamisesta sekä empiirinen tutkimusosuus asiakastarpeiden tunnistamisesta. Venttiiliyhdistelmä -mittakuviin liittyvät asiakastarpeet kerättiin haastatteluiden sekä verkkokyselyn avulla. Työssä haastateltiin Metson asiantuntijoita, Metson asiakkaita sekä CAD-järjestelmien toimittajia. Työn keskeisimpänä tuloksena esitettiin mittakuvatoiminnan kehittämissuunnitelma, jonka perustana oli mittakuviin liittyvä asiakastarvekartoitus, arvio Metson mittakuvatyökaluista sekä tulokset 3D-mittakuvien data- ja järjestelmävaatimuksista. Kehittämissuunnitelmassa kuvattiin, miten mittakuvatoimintaa tulee kehittää kokonaisvaltaisesti lähitulevaisuudessa. Tulokset antavat hyvän perustan laadukkaamman ja asiakaslähtöisemmän toiminnan kehittämiselle.

Weed mapping using a machine vision system

Weed mapping is a useful tool for site-specific herbicide applications. The objectives of this study were (1) to determine the percentage of land area covered by weeds in no-till and conventionally tilled fields of common bean using digital image processing and geostatistics, and (2) to compare two types of cameras. Two digital cameras (color and infrared) and a differential GPS were affixed to a center pivot structure for image acquisition. Sample field images were acquired in a regular grid pattern, and the images were processed to estimate the percentage of weed cover. After calculating the georeferenced weed percentage values, maps were constructed using geostatistical techniques. Based on the results, color images are recommended for mapping the percentage of weed cover in no-till systems, while infrared images are recommended for weed mapping in conventional tillage systems.

Thermal-Aware Networked Many-Core Systems

Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors. This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.

Weed mapping using techniques of precision agriculture

The aim of this study was to identify and map the weed population in a no-tillage area. Geostatistical techniques were used in the mapping in order to assess this information as a tool for the localized application of herbicides. The area of study is 58.08 hectares wide and was sampled in a fixed square grid (which point spaced 50 m, 232 points) using a GPS receiver. In each point the weeds species and population were analyzed in a square with a 0.25 m2 fixed area. The species Ipomoea grandifolia, Gnaphalium spicatum, Richardia spp. and Emilia sonchifolia have presented no spatial dependence. However, the species Conyza spp., C. echinatus and E. indica have shown a spatial correlation. Among the models tested, the spherical model has shown had a better fit for Conyza spp. and Eleusine indica and the Gaussian model for Cenchrus echinatus. The three species have a clumped spatial distribution. The mapping of weeds can be a tool for localized control, making herbicide use more rational, effective and economical.

Selection of Grids for Weed Mapping

This study aimed to assess the degree of similarity presented by thematic maps generated by different sampling grids of weed plants in a commercial agricultural area of 7.95 hectares. Monocotyledons and dicotyledons were counted on the 2012/2013 and 2013/2014 harvests, before soybean planting, in the fallow period after wheat harvest, in both years. A regular grid of 10 x 10 m was produced to sample the invasive plants, used as reference, and the counting was done in 1 m² of each sample point, totaling 795 samples in each year, compared to regular grids of 30 and 50 m, generated from the data exclusion of the standard grid. Twenty-two composite soil samples were taken at a depth of 0-20 cm to correlate soil properties with weeds occurrence. For the generation of the thematic maps, the Inverse Distance Weighting (IDW) for interpolation was used; when comparing the maps generated from each grid with the reference map, the kappa coefficient was used to assess the loss of quality of the maps as the number of sample points was reduced. It was observed that the map quality loss was lower in 2013 compared to 2012 when the sampling density of the points was reduced. The 30 x 30 m grids have satisfactorily described the infestation data of the dicotyledons and the 50 x 50 m grids have adequately described the monocotyledon weeds infestation, compared to the standard 10 x 10 m grids.

Intelligent mapping of stresses in a hydraulic crane

Continuous loading and unloading can cause breakdown of cranes. In seeking solution to this problem, the use of an intelligent control system for improving the fatigue life of cranes in the control of mechatronics has been under study since 1994. This research focuses on the use of neural networks as possibilities of developing algorithm to map stresses on a crane. The intelligent algorithm was designed to be a part of the system of a crane, the design process started with solid works, ANSYS and co-simulation using MSc Adams software which was incorporated in MATLAB-Simulink and finally MATLAB neural network (NN) for the optimization process. The flexibility of the boom accounted for the accuracy of the maximum stress results in the ADAMS model. The flexibility created in ANSYS produced more accurate results compared to the flexibility model in ADAMS/View using discrete link. The compatibility between.ADAMS and ANSYS softwares was paramount in the efficiency and the accuracy of the results. Von Mises stresses analysis was more suitable for this thesis work because the hydraulic boom was made from construction steel FE-510 of steel grade S355 with yield strength of 355MPa. Von Mises theory was good for further analysis due to ductility of the material and the repeated tensile and shear loading. Neural network predictions for the maximum stresses were then compared with the co-simulation results for accuracy, and the comparison showed that the results obtained from neural network model were sufficiently accurate in predicting the maximum stresses on the boom than co-simulation.

Mapping of a novel viviparous unstable mutant of maize (vp 12)

A new viviparous mutant of maize (Zea mays L.), associated with genetic instability and designated viviparous-12 (vp12), was identified in a synthetic Tuxpeño adapted to tropical regions. In the present work, the linkage group of this new locus was determined. Progenies of inbred line L477 segregating for the vp12 mutant were crossed with waxy-marked reciprocal translocation stocks. The phenotypic frequencies of the wx and vp12 mutants were analyzed in F2 progenies. The results demonstrated that the Viviparous-12 locus of maize is located on the long arm of chromosome 6.

Chromosomal evolution and comparative gene mapping in the Drosophila repleta species group

A review of our recent work on the cromosomal evolution of the Drosophila repleta species group is presented. Most studies have focused on the buzzatii species complex, a monophyletic set of 12 species which inhabit the deserts of South America and the West Indies. A statistical analysis of the length and breakpoint distribution of the 86 paracentric inversions observed in this complex has shown that inversion length is a selected trait. Rare inversions are usually small while evolutionary successful inversions, fixed and polymorphic, are predominantly of medium size. There is also a negative correlation between length and number of inversions per species. Finally, the distribution of inversion breakpoints along chromosome 2 is non-random, with chromosomal regions which accumulate up to 8 breakpoints (putative "hot spots"). Comparative gene mapping has also been used to investigate the molecular organization and evolution of chromosomes. Using in situ hybridization, 26 genes have been precisely located on the salivary gland chromosomes of D. repleta and D. buzzatii; another nine have been tentatively identified. The results are fully consistent with the currently accepted chromosomal homologies between D. repleta and D. melanogaster, and no evidence for reciprocal translocations or pericentric inversions has been found. The comparison of the gene map of D. repleta chromosome 2 with that of the homologous chromosome 3R of D. melanogaster shows an extensive reorganization via paracentric inversions and allows to estimate an evolution rate of ~1 inversion fixed per million years for this chromosome

A systematic mapping study of web services discovery mechanisms

Context: Web services have been gaining popularity due to the success of service oriented architecture and cloud computing. Web services offer tremendous opportunity for service developers to publish their services and applications over the boundaries of the organization or company. However, to fully exploit these opportunities it is necessary to find efficient discovery mechanism thus, Web services discovering mechanism has attracted a considerable attention in Semantic Web research, however, there have been no literature surveys that systematically map the present research result thus overall impact of these research efforts and level of maturity of their results are still unclear. This thesis aims at providing an overview of the current state of research into Web services discovering mechanism using systematic mapping. The work is based on the papers published 2004 to 2013, and attempts to elaborate various aspects of the analyzed literature including classifying them in terms of the architecture, frameworks and methods used for web services discovery mechanism. Objective: The objective if this work is to summarize the current knowledge that is available as regards to Web service discovery mechanisms as well as to systematically identify and analyze the current published research works in order to identify different approaches presented. Method: A systematic mapping study has been employed to assess the various Web Services discovery approaches presented in the literature. Systematic mapping studies are useful for categorizing and summarizing the level of maturity research area. Results: The result indicates that there are numerous approaches that are consistently being researched and published in this field. In terms of where these researches are published, conferences are major contributing publishing arena as 48% of the selected papers were conference published papers illustrating the level of maturity of the research topic. Additionally selected 52 papers are categorized into two broad segments namely functional and non-functional based approaches taking into consideration architectural aspects and information retrieval approaches, semantic matching, syntactic matching, behavior based matching as well as QOS and other constraints.

Mapping cancer, cardiovascular and malaria research in Brazil

This paper presents performance indicators for the Brazilian cancer, cardiovascular and malaria research areas from 1981 to 1995. The data show an increasing number of papers since 1981 and author numbers indicate a continuous growth of the scientific community and suggest an expected impact of scientific activity on biomedical education. The data also characterize cardiovascular research as a well-established area and cancer research as a faster growing consolidating field. The 1989-1994 share of Brazilian articles among world publications shows a growing trend for the cancer (1.61) and cardiovascular (1.59) areas, and a decrease for the malaria area (0.89). The burden of the three diseases on society is contrasted by the small number of consolidated Brazilian research groups, and a questionable balance of thematic activity, especially with regard to malaria. Brazilian periodicals play an important role in increasing the international visibility of science produced in the country. Cancer and cardiovascular research is strongly concentrated in the Southeastern and in Southern regions of Brazil, especially in São Paulo (at least one address from São Paulo in 64.5% of the 962 cancer articles and in 66.9% of the 2250 cardiovascular articles, the second state being Rio de Janeiro with at least one address in 14.1 and 11% of those articles, respectively). Malaria research (468 articles) is more evenly distributed across the country, following the pattern of the endemic distribution of the disease. Surveying these national indicator trends can be useful to establish policies in the decision process about health sciences, medical education and public health.