Fatigue depresses maximal in vitro skeletal muscle Na+-K+-ATPase activity in untrained and trained individuals

This study investigated whether fatiguing dynamic exercise depresses maximal in vitro Na+-K+-ATPase activity and whether any depression is attenuated with chronic training. Eight untrained (UT), eight resistance-trained (RT), and eight endurance-trained (ET) subjects performed a quadriceps fatigue test, comprising 50 maximal isokinetic contractions (180°/s, 0.5 Hz). Muscle biopsies (vastus lateralis) were taken before and immediately after exercise and were analyzed for maximal in vitro Na+-K+-ATPase (K+-stimulated 3-O-methylfluoroscein phosphatase) activity. Resting samples were analyzed for [3H]ouabain binding site content, which was 16.6 and 18.3% higher (P < 0.05) in ET than RT and UT, respectively (UT 311 ± 41, RT 302 ± 52, ET 357 ± 29 pmol/g wet wt). 3-O-methylfluoroscein phosphatase activity was depressed at fatigue by −13.8 ± 4.1% (P < 0.05), with no differences between groups (UT −13 ± 4, RT −9 ± 6, ET −22 ± 6%). During incremental exercise, ET had a lower ratio of rise in plasma K+ concentration to work than UT (P < 0.05) and tended (P = 0.09) to be lower than RT (UT 18.5 ± 2.3, RT 16.2 ± 2.2, ET 11.8 ± 0.4 nmol · l−1 · J−1). In conclusion, maximal in vitro Na+-K+-ATPase activity was depressed with fatigue, regardless of training state, suggesting that this may be an important determinant of fatigue.

Synthesis and characterization of nanocrystalline hexagonal boron carbo-nitride under high temperature and high pressure

A study of the synthesis of hexagonal boron carbo-nitride (h-BCN) compounds via a two-step high-temperature and high-pressure (HTHP) technique using melamine (C 3N 6H 6) and boron oxide (B 2O 3) as raw materials is presented. An amorphous BCN precursor was prepared at 1000K under vacuum in a resistance furnace and then single-phase h-BCN nanocrystalline was synthesized at 1600K and 5.1GPa in a multi-anvil apparatus. X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the final products were pure h-BCN crystals with the lattice constants a ≤ 0.2510nm and c ≤ 0.6690nm. The average grain size was about 150nm. X-ray photoelectron spectroscopy (XPS) results confirmed the occurrence of bonding between C-C, C-N, C-B and N-B atoms. Raman scattering analysis suggested that there were three strong Raman bands centered at 1359, 1596 and 1617cm -1, respectively. The band at 1617cm -1 was considered to be consistent with the characteristic Raman peak of h-BCN.

Flight costs and fuel composition of a bird migrating in a wind tunnel

We studied the energy and protein balance of a Thrush Nightingale Luscinia luscinia, a small long-distance migrant, during repeated 12-hr long flights in a wind tunnel and during subsequent two-day fueling periods. From the energy budgets we estimated the power requirements for migratory flight in this 26 g bird at 1.91 Watts. This is low compared to flight cost estimates in birds of similar mass and with similar wing shape. This suggests that power requirements for migratory flight are lower than the power requirements for nonmigratory flight. From excreta production during flight, and nitrogen and energy balance during subsequent fueling, the dry protein proportion of stores was estimated to be around 10%. A net catabolism of protein during migratory flight along with that of fat may reflect a physiologically inevitable process, a means of providing extra water to counteract dehydration, a production of uric acid for anti-oxidative purposes, and adaptive changes in the size of flight muscles and digestive organs in the exercising animal.

High basal metabolic rates of shorebirds while in the Arctic: a circumpolar view

The basal metabolic rate (BMR) of Old World long-distance-migrant shorebirds has been found to vary along their migration route. On average, BMR is highest in the Arctic at the start of fall migration, intermediate at temperate latitudes, and lowest on the tropical wintering grounds. As a test of the generality of this pattern, we measured the BMR of one adult and 44 juvenile shorebirds of 10 species (1-18 individuals of each species, body-mass range 19-94 g) during the first part of their southward migration in the Canadian Arctic (68-76°N). The interspecific relationship between BMR and body mass was almost identical to that found for juvenile shorebirds in the Eurasian Arctic (5 species), although only one species appeared in both data sets. We conclude that high BMR of shorebirds in the Arctic is a circumpolar phenomenon. The most likely explanation is that the high BMR reflects physiological adaptations to low ambient temperatures. Whether the BMR of New World shorebirds drops during southward migration remains to be investigated.

Trends in US contact lens prescribing 2002 to 2014

Purpose To document contact lens prescribing patterns in the United States between 2002 and 2014. Methods A survey of contact lens prescribing trends was conducted each year between 2002 and 2014, inclusive. Randomly selected contact lens practitioners were asked to provide information relating to 10 consecutive contact lens fits between January and March each year. Results Over the 13-year survey period, 1650 survey forms were received from US practitioners representing details of 7702 contact lens fits. The mean (±SD) age of lens wearers was 33.6 (±15.2) years, of whom 65.2% were female. Rigid lens new fits decreased from 13.0% in 2002 to 9.4% in 2014. Across this period, silicone hydrogels have replaced mid water contact lens hydrogels as the soft lens material of choice. Toric lenses represented about 25 to 30% of all soft lens fits. Multifocal soft lenses are generally preferred to monovision. Daily disposable lens fits have recently increased, and in 2014, they represented 27.1% of all soft lens fits. Most lenses are prescribed on 1 to 2 weekly or monthly lens replacement regimen. Extended wear remains a minority lens wearing modality. The vast majority of those wearing reusable lenses use multipurpose lens care solutions. Lenses are mostly worn 7 d/wk. Conclusions This survey has revealed prescribing trends and preferences in the United States over the past 13 years.

Relationships between problematic alcohol consumption and delinquent behaviour from adolescence to young adulthood

Abstract Background. Heavy episodic drinking (HED) has been associated with increased risk for short- and long-term injury and harms, such as violence and delinquent behaviour; however, the temporal relationship between the two remains unclear, pathways between HED and delinquent behaviour from adolescence to emerging adulthood. Methods. Data were drawn from the Australian Temperament Project; a population-based longitudinal study that has followed the health and development of participants (and parents) across 30 years from birth in 1982.The analytic sample was 1650 participants and included five measurement waves spanning adolescence (3 waves: 13–18 years) and young adulthood (2 waves; 19–24 years). Results. There was strong continuity across waves of both HED and delinquency, as well as across-time associations between them. Delinquent behaviour in adolescence was associated with up to twofold increases in the odds of HED at each subsequent adolescent wave. HED in the late teens was associated with over fourfold increases in the odds of persistent (two waves) HED in young adulthood. HED in the late teens was associated with increases in the odds of delinquent behaviour in young adulthood (over twofold for male and one and a half-fold for female participants). Conclusions. While delinquent behaviour predicts both future HED and future delinquent behaviour in adolescence, once young people reach the legal drinking age of 18 years, HED becomes a predictor of current and future delinquent behaviour and future HED, suggesting that increased access to alcohol increases the likelihood of young people engaging in delinquent behaviour. [Miller PG, Butler E, Richardson B, Staiger PK, Youssef GJ, Macdonald JA, Sanson A, Edwards B, Olsson CA. Relationships between problematic alcohol consumption and delinquent behaviour from adolescence to young adulthood. Drug Alcohol Rev 2015]

Simulação numérica de escoamentos hipersônicos em não-equilíbrio termo-químico através do método dos elementos finitos

o presente trabalho tem por objetivo desenvolver um código computacional destinado à simulaçáo numérica tridimensional e de escoamentos compressíveis hipersônicos em especial para analisar o processo de reentrada de veículos espaciais na atmosfera terrestre. Devido ás temperaturas elevadas encontradas neste tipo de escoamento, efeitos de altas temperaturas sáo incluídos, como excitação vibracional das moléculas e reações químícas. Utiliza-se o modelo de 2 temperaturas (translacional e vibracional);5 espécíes (N2, O2, NO, N, O) e 17 reações químicas de Park [1986 para o modelamento do fenômeno termo-químico. Introduz-se uma formulação baseada no método dos elementos finitos, através do esquema de Taylor-Calerkin, para a discretização do tempo e do espaço e para a solução do sistema de equações. Alguns exemplos e aplicações de problemas hipersônicos bi e tridimensionais, difusivos e não difusivos, são apresentados, incluindo comparações entre os resultados obtidos no presente trabalho e na literatura.

Um Sistema multiagente para o Simulador Soccerserver

O interesse de pesquisa da comunidade de Inteligência Artificial em Sistemas Multiagentes tem gerado o crescimento da utilização de técnicas de agentes nas mais diversas áreas da ciência da computação. Isso ocorre, principalmente, devido à variedade de aplicações em que esses sistemas podem ser usados, como por exemplo: jogos de computadores, interfaces adaptativas, simulação e controle de processos industriais. The Robot World Cup Initiative (RoboCup) é uma tentativa de estimular a área de Inteligência Artificial e, principalmente de Sistemas Multiagentes, por promover um problema padrão, jogar futebol, onde uma ampla cadeia de tecnologias podem ser integradas, examinadas e comparadas. A utilização do ambiente da RoboCup para a simulação de uma partida de futebol (simulador Soccerserver) permite a avaliação de diferentes técnicas de Sistemas Multiagentes (planejamento de estratégias, conhecimento em tempo real, colaboração de agentes, princípios de agentes autônomos, entre outros) e estimula as pesquisas, investigações e testes que possibilitem a construção gradativa de agentes avançados. O presente trabalho tem por objetivo o desenvolvimento de um time de futebol para o simulador Soccerserver. A idéia principal é desenvolver agentes jogadores que demonstrem um nível considerável de competência para a realização de suas tarefas, como percepção, ação, cooperação, estratégias pré-definidas, decisão e previsão. Inicialmente, apresenta-se uma visão geral sobre Inteligência Artificial Distribuída e sobre o simulador Soccerserver, pré-requisitos para o restante do trabalho. A seguir, é realizado um estudo sobre algumas arquiteturas de agentes (clientes) do Soccerserver. A arquitetura proposta na dissertação, suas principais características e a sua materialização em um protótipo desenvolvido correspondem à parte principal do trabalho. Finalmente são apresentados os testes realizados e as conclusões do trabalho.

Parabéns

Ilustração componente do jogo “Escola Mágica (http://www.loa.sead.ufscar.br/escola-magica.html)” desenvolvido pela equipe do Laboratório de Objetos de Aprendizagem da Universidade Federal de São Carlos (LOA/UFSCar).

Bloco D

Ilustração componente do jogo “Ortotetris (http://www.loa.sead.ufscar.br/ortotetris.html)” desenvolvido pela equipe do Laboratório de Objetos de Aprendizagem da Universidade Federal de São Carlos (LOA/UFSCar).

Infiltração de sal de alumínio em fibras de sisal para obtenção de fibras de alumina

ANDRADE JR., T. E. et al. Infiltração de sal de alumínio em fibras de sisal para obtenção de fibras de alumina. Cerâmica, v.51, n.317, p.37-41.ISSN 0366-6913. Disponível em:. Acesso em: 06 out. 2010.

Produção de fibras de alumina biomórfica a partir do sisal

Sisal is a renewable agricultural resource adapted to the hostile climatic and soil conditions particularly encountered in the semi-arid areas of the state of Rio Grande do Norte. Consequently, sisal has played a strategic role in the economy of the region, as one of few options of income available in the semi-arid. Find new options and adding value to products manufactured from sisal are goals that contribute not only to the scientific and technological development of the Northeastern region, but also to the increase of the family income for people that live in the semi-arid areas where sisal is grown. Lignocellulosic fibers are extracted from sisal and commonly used to produce both handcrafted and industrial goods including ropes, mats and carpets. Alternatively, addedvalue products can be made using sisal to produce alumina fibers (Al2O3) by biotemplating, which consists in the reproduction of the natural fiber-like structure of the starting material. The objective of this study was to evaluate the conditions necessary to convert sisal into alumina fibers by biotemplating. Alumina fibers were obtaining after pretreating sisal fibers and infiltrating them with a Al2Cl6 saturated solution, alumina sol from aluminum isopropoxide or aluminum gas. Heat-treating temperatures varied from 1200 ºC to 1650 °C. The resulting fibers were then characterized by X-ray diffraction and scanning electronic microscopy. Fibers obtained by liquid infiltration revealed conversion only of the surface of the fiber into α-Al2O3, which yielded limited resistance to handling. Gas infiltration resulted in stronger fibers with better reproduction of the inner structure of the original fiber. All converted fibers consisted of 100% α-Al2O3 suggesting a wide range of technological applications especially those that require thermal isolation

Neustonic distribution of decapod planktonic stages and competence of brachyuran megalopae in coastal waters

Settlement rate may not reflect larval supply to coastal waters in different marine invertebrates and demersal fishes. The importance of near-shore oceanography and behaviour of late larval stages may be underestimated. The present study conducted neustonic sampling over station grids and along full-length transects at two embayments in south-eastern Brazil to (1) compare diurnal and nocturnal occurrence of most frequent decapod stages to assess their vertical movements, (2) describe the formation of larval patches and (3) measure competence of crab megalopae according to their distance to recruitment grounds. Several shrimp species apparently undergo a diel vertical migration, swimming crab megalopae showed no vertical movements and megalopae of the intertidal crab Pachygrapsus transversus revealed a reversed vertical migration. During the day, crab megalopae aggregated in convergence zones just below surface slicks. These larvae consisted of advanced, pre-moult stages, at both mid-bay and near-shore patches. Competence, measured as the time to metamorphosis in captivity, was similar between larval patches within each taxon. Yet, subtidal portunids moulted faster to juveniles than intertidal grapsids, possibly because they were closer to settlement grounds. Megalopae of Pachygrapsus from benthic collectors moulted faster than those from bay areas. These results suggest that alternative vertical migration patterns of late megalopae favour onshore transport, and actual competence takes place very close to suitable substrates, where larvae may remain for days before settlement. Lack of correlation between larval supply and settlement for Pachygrapsus suggests that biological processes, besides onshore transport, may play an important role in determining settlement success of coastal crabs.