Estudo dos parâmetros operacionais do processo de combustão in situ em reservatório de petróleo pesado

The occurrence of heavy oil reservoirs have increased substantially and, due to the high viscosity characteristic of this type of oil, conventional recovery methods can not be applied. Thermal methods have been studied for the recovery of this type of oil, with a main objective to reduce its viscosity, by increasing the reservoir temperature, favoring the mobility of the oil and allowing an increasing in the productivity rate of the fields. In situ combustion (ISC) is a thermal recovery method in which heat is produced inside the reservoir by the combustion of part of the oil with injected oxygen, contrasting with the injection of fluid that is heated in the surface for subsequent injection, which leads to loss heat during the trajectory to the reservoir. The ISC is a favorable method for recovery of heavy oil, but it is still difficult to be field implemented. This work had as an objective the parametric analysis of ISC process applied to a semi-synthetic reservoir with characteristics of the Brazilian Northeast reservoirs using vertical production and vertical injection wells, as the air flow injection and the wells completions. For the analysis, was used a commercial program for simulation of oil reservoirs using thermal processes, called Steam, Thermal and Advanced Processes Reservoir Simulator (STARS) from Computer Modelling Group (CMG). From the results it was possible to analyze the efficiency of the ISC process in heavy oil reservoirs by increasing the reservoir temperature, providing a large decrease in oil viscosity, increasing its mobility inside the reservoir, as well as the improvement in the quality of this oil and therefore increasing significantly its recovered fraction. Among the analyzed parameters, the flow rate of air injection was the one which had greater influence in ISC, obtaining higher recovery factor the higher is the flow rate of injection, due to the greater amount of oxygen while ensuring the maintenance of the combustion front

Um modelo matemático baseado em wavelets para análise do método térmico de recuperação de óleo pesado aplicando irradiação eletromagnética

This work proposes a model to investigate the use of a cylindrical antenna used in the thermal method of recovering through electromagnetic radiation of high-viscosity oil. The antenna has a simple geometry, adapted dipole type, and it can be modelled by using Maxwell s equation. The wavelet transforms are used as basis functions and applied in conjunction with the method of moments to obtain the current distribution in the antenna. The electric field, power and temperature distribution are carefully calculated for the analysis of the antenna as electromagnetic heating. The energy performance is analyzed based on thermo-fluid dynamic simulations at field scale, and through the adaptation in the Steam Thermal and Advanced Processes Reservoir Simulator (STARS) by Computer Modelling Group (CMG). The model proposed and the numerical results obtained are stable and presented good agreement with the results reported in the specialized literature

Análise de viabilidade de injeção de fluidos alternativos ao vapor em reservatórios de óleo pesado

Many of hydrocarbon reserves existing in the world are formed by heavy oils (°API between 10 and 20). Moreover, several heavy oil fields are mature and, thus, offer great challenges for oil industry. Among the thermal methods used to recover these resources, steamflooding has been the main economically viable alternative. Latent heat carried by steam heats the reservoir, reducing oil viscosity and facilitating the production. This method has many variations and has been studied both theoretically and experimentally (in pilot projects and in full field applications). In order to increase oil recovery and reduce steam injection costs, the injection of alternative fluid has been used on three main ways: alternately, co-injected with steam and after steam injection interruption. The main objective of these injection systems is to reduce the amount of heat supplied to the reservoir, using cheaper fluids and maintaining the same oil production levels. This works discusses the use of carbon dioxide, nitrogen, methane and water as an alternative fluid to the steam. The analyzed parameters were oil recoveries and net cumulative oil productions. The reservoir simulation model corresponds to an oil reservoir of 100 m x 100 m x 28 m size, on a Cartesian coordinates system (x, y and z directions). It is a semi synthetic model with some reservoir data similar to those found in Brazilian Potiguar Basin. All studied cases were done using the simulator STARS from CMG (Computer Modelling Group, version 2009.10). It was found that waterflood after steam injection interruption achieved the highest net cumulative oil compared to other fluids injection. Moreover, it was observed that steam and alternative fluids, co-injected and alternately, did not present increase on profitability project compared with steamflooding

Análise paramétrica da injeção de vapor e solvente em reservatórios de óleo pesado

A significant fraction of the hydrocarbon reserves in the world is formed by heavy oils. From the thermal methods used to recovery these resources, Steamflooding has been one of the main economically viable alternatives. In Brazil, this technology is widely used by Petrobras in Northeast fields. Latent heat carried by steam heats the oil in the reservoir, reducing its viscosity and facilitating the production. In the last years, an alternative more and more used by the oil industry to increase the efficiency of this mechanism has been the addition of solvents. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a low viscosity zone between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method and investigate its applicability in reservoirs with properties similar to those found in Potiguar Basin, a numerical study was done to analyze the influence of some operational parameters (steam injection rate, injected solvent volume and solvent type) on oil recovery. Simulations were performed in STARS ("Steam, Thermal, and Advanced Processes Reservoir Simulator"), a CMG ("Computer Modelling Group") program, version 2009.10. It was found that solvents addition to the injected steam not only anticipated the heated oil bank arrival to the producer well, but also increased the oil recovery. Lower cold water equivalent volumes were required to achieve the same oil recoveries from the models that injected only steam. Furthermore, much of the injected solvent was produced with the oil from the reservoir

Estudo do acoplamento do poço injetor nas simulações de injeção cíclica de vapor

Steam injection is a method usually applied to very viscous oils and consists of injecting heat to reduce the viscosity and, therefore, increase the oil mobility, improving the oil production. For designing a steam injection project it is necessary to have a reservoir simulation in order to define the various parameters necessary for an efficient heat reservoir management, and with this, improve the recovery factor of the reservoir. The purpose of this work is to show the influence of the coupled wellbore/reservoir on the thermal simulation of reservoirs under cyclic steam stimulation. In this study, the methodology used in the solution of the problem involved the development of a wellbore model for the integration of steam flow model in injection wellbores, VapMec, and a blackoil reservoir model for the injection of cyclic steam in oil reservoirs. Thus, case studies were developed for shallow and deep reservoirs, whereas the usual configurations of injector well existing in the oil industry, i.e., conventional tubing without packer, conventional tubing with packer and insulated tubing with packer. A comparative study of the injection and production parameters was performed, always considering the same operational conditions, for the two simulation models, non-coupled and a coupled model. It was observed that the results are very similar for the specified well injection rate, whereas significant differences for the specified well pressure. Finally, on the basis of computational experiments, it was concluded that the influence of the coupled wellbore/reservoir in thermal simulations using cyclic steam injection as an enhanced oil recovery method is greater for the specified well pressure, while for the specified well injection rate, the steam flow model for the injector well and the reservoir may be simulated in a non- coupled way

Diagnóstico ecotoxicológico dos efluentes lançados no complexo estuarino do Jundiaí/Potengi, Natal/RN

Untreated effluents that reach surface water affect the aquatic life and humans. This study aimed to evaluate the wastewater s toxicity (municipal, industrial and shrimp pond effluents) released in the Estuarine Complex of Jundiaí- Potengi, Natal/RN, through chronic quantitative e qualitative toxicity tests using the test organism Mysidopsis Juniae, CRUSTACEA, MYSIDACEA (Silva, 1979). For this, a new methodology for viewing chronic effects on organisms of M. juniae was used (only renewal), based on another existing methodology to another testorganism very similar to M. Juniae, the M. Bahia (daily renewal).Toxicity tests 7 days duration were used for detecting effects on the survival and fecundity in M. juniae. Lethal Concentration 50% (LC50%) was determined by the Trimmed Spearman-Karber; Inhibition Concentration 50% (IC50%) in fecundity was determined by Linear Interpolation. ANOVA (One Way) tests (p = 0.05) were used to determinate the No Observed Effect Concentration (NOEC) and Low Observed Effect Concentration (LOEC). Effluents flows were measured and the toxic load of the effluents was estimated. Multivariate analysis - Principal Component Analysis (PCA) and Correspondence Analysis (CA) - identified the physic-chemical parameters better explain the patterns of toxicity found in survival and fecundity of M. juniae. We verified the feasibility of applying the only renewal system in chronic tests with M. Juniae. Most efluentes proved toxic on the survival and fecundity of M. Juniae, except for some shrimp pond effluents. The most toxic effluent was ETE Lagoa Aerada (LC50, 6.24%; IC50, 4.82%), ETE Quintas (LC50, 5.85%), Giselda Trigueiro Hospital (LC50, 2.05%), CLAN (LC50, 2.14%) and COTEMINAS (LC50, IC50 and 38.51%, 6.94%). The greatest toxic load was originated from ETE inefficient high flow effluents, textile effluents and CLAN. The organic load was related to the toxic effects of wastewater and hospital effluents in survival of M. Juniae, as well as heavy metals, total residual chlorine and phenols. In industrial effluents was found relationship between toxicity and organic load, phenols, oils and greases and benzene. The effects on fertility were related, in turn, with chlorine and heavy metals. Toxicity tests using other organisms of different trophic levels, as well as analysis of sediment toxicity are recommended to confirm the patterns found with M. Juniae. However, the results indicate the necessity for implementation and improvement of sewage treatment systems affluent to the Potengi s estuary

Desenvolvimento de metodologias analíticas alternativas por cromatografia gasosa para análise de biodiesel

Since the beginning of the National Program for Production and Use of Biodiesel in Brazil, in 2004, different raw materials were evaluated for biodiesel production, trying to combine the agricultural diversity of the country to the desire to reduce production coasts. To determine the chemical composition of biodiesel produced from common vegetables oils, international methods have been used widely in Brazil. However, for analyzing biodiesel samples produced from some alternative raw materials analytical problems have been detected. That was the case of biodiesel from castor oil. Due the need to overcome these problems, new methodologies were developed using different chromatographic columns, standards and quantitative methods. The priority was simplifying the equipment configuration, realizing faster analyses, reducing the costs and facilitating the routine of biodiesel research and production laboratories. For quantifying free glycerin, the ethylene glycol was used in instead of 1,2,4-butanetriol, without loss of quality results. The ethylene glycol is a cheaper and easier standard. For methanol analyses the headspace was not used and the cost of the equipment used was lower. A detailed determination of the esters helped the deeper knowledge of the biodiesel composition. The report of the experiments and conclusions of the research that resulted in the development of alternative methods for quality control of the composition of the biodiesel produced in Brazil, a country with considerable variability of species in agriculture, are the goals of this thesis and are reported in the following pages

Atividade antimalárica de plantas medicinais da biorregião do Araripe-CE em modelo murino - Plasmodium berghei

Malaria, also popularly known as maleita , intermittent fever, paludism, impaludism, third fever or fourth fever, is an acute infectious febrile disease, which, in human beings, is caused by four species: Plasmodium falciparum, P. vivax, P. malariae and P. ovale. Malaria, one of the main infectious diseases in the world, is the most important parasitoses, with 250 million annual cases and more than 1 million deaths per year, mainly in children younger than live years of age. The prophylactic and therapeutic arsenal against malaria is quite restricted, since all the antimalarials currently in use have some limitation. Many plant species belonging to several families have been tested in vivo, using the murine experimental model Plasmodium berghei or in vitro against P. falciparum, and this search has been directed toward plants with antithermal, antimalarial or antiinflammatory properties used in popular Brazilian bolk medicine. Studies assessing the biological activity of medicinal plant essential oils have revealed activities of interest, such as insecticidal, spasmolytic and antiplasmodic action. It has also been scientifically established that around 60% of essential oils have antifungal properties and that 35% exhibit antibacterial properties. In our investigation, essential oils were obtained from the species Vanillosmopsis arborea, Lippia sidoides and Croton zethneri which are found in the bioregion of Araripe-Ceará. The chemical composition of these essential oils was partially characterized and the presence of monoterpenes and sesquiterpenes. The acute toxicity of these oils was assessed in healthy mice at different doses applied on a single day and on four consecutive days, and in vitro cytotoxicity in HeLa and Raw cell lines was determined at different concentrations. The in vivo tests obtained lethal dose values of 7,1 mg/Kg (doses administered on a single day) and 1,8 mg/Kg (doses administered over four days) for 50% of the animals. In the in vitro tests, the inhibitory concentration for 50% of cell growth in Hela cell lines was 588 μg/mL (essential oil from C. zethneri after 48 h), from 340-555 μg/mL (essential oil from L. sidoides, after 24 and 48 h). The essential oil from V. arborea showed no cytotoxicity and none of the essential oils were cytotoxic in Raw cell lines. These data suggest a moderate toxicity in the essential XVIII oils under study, a finding that does not impede their testing in in vivo antimalarial assays. Was shown the antimalarial activity of the essential oils in mice infected with P. berghei was assessed. The three species showed antimalarial activity from 36%-57% for the essential oil from the stem of V. arborea; from 32%-82% for the essential oil from the leaves of L. sidoides and from 40%-70% of reduction for the essential oil from the leaves of C. zethneri. This is the first study showing evidence of antimalarial activity with these species from northeast Brazil. Further studies to isolate the active ingredients of these oils are needed to determine if a single active ingredient accounts for the antimalarial activity or if a complex integration of all the compounds present occurs, a situation reflected in their biological activity

La manipulation idéologique dans l’édition et deux traductions de la Description de l’Afrique de Hassan El Wazzan / Jean-Léon l’Africain

En 1526, Hassan El Wazzan / Jean-Léon l’Africain, achève à Rome la rédaction en italien du manuscrit du Libro della Cosmographia Dell’Africa, œuvre majeure considérée à la Renaissance comme l’une des principales sources de connaissance du continent africain en Europe. En 1550, un savant vénitien du nom de Jean-Baptiste Ramusio publie le texte italien de Jean-Léon dans un recueil de récits de voyages. L’édition, intitulée Descrizione dell’Africa (Description de l’Afrique), diffère significativement du manuscrit original. Elle subit maintes modifications par Ramusio dont l’objectif est de livrer un ouvrage qui répond aux attentes des Européens et qui correspond à l’image que l’Occident chrétien se faisait du monde musulman. Cette version a servi de texte de départ aux nombreuses traductions qui ont suivi. La première traduction française, datant de 1556, est réalisée par Jean Temporal, éditeur et imprimeur lyonnais. La deuxième, parue en 1956 et rééditée en 1980, est l’œuvre d’Alexis Épaulard; elle s’appuie partiellement sur le manuscrit original, mais aussi sur la version imprimée de Ramusio. Notre travail consiste à confronter les deux traductions françaises à l’édition de Ramusio. Nous tenterons de démontrer que les deux traducteurs français sont lourdement intervenus dans le texte traduit, et ce afin de servir des desseins expansionnistes et colonialistes. Notre recherche met en évidence la prise de position des traducteurs et les idéologies qui affectent l’appréciation du livre. Pour ce faire, nous procédons à l’analyse des traductions au niveau textuel et au niveau paratextuel tout en mettant en évidence le contexte historique et politico-idéologique entourant la parution de ces deux traductions françaises. Nous consacrons une attention toute particulière au choix des mots, aux allusions et aux stratégies utilisées par les traducteurs et les éditeurs. Les travaux de Maria Tymoczko sur la traduction et l’engagement politique fournissent le cadre de référence théorique de cette recherche, tout autant que les textes d’Edward Said sur l’orientalisme et le postcolonialisme. Il ressort de cette recherche que ces traductions françaises sont empreintes d’une idéologie eurocentrée visant à conforter les ambitions hégémoniques en terre africaine.

La manipulation idéologique dans l’édition et deux traductions de la Description de l’Afrique de Hassan El Wazzan / Jean-Léon l’Africain

En 1526, Hassan El Wazzan / Jean-Léon l’Africain, achève à Rome la rédaction en italien du manuscrit du Libro della Cosmographia Dell’Africa, œuvre majeure considérée à la Renaissance comme l’une des principales sources de connaissance du continent africain en Europe. En 1550, un savant vénitien du nom de Jean-Baptiste Ramusio publie le texte italien de Jean-Léon dans un recueil de récits de voyages. L’édition, intitulée Descrizione dell’Africa (Description de l’Afrique), diffère significativement du manuscrit original. Elle subit maintes modifications par Ramusio dont l’objectif est de livrer un ouvrage qui répond aux attentes des Européens et qui correspond à l’image que l’Occident chrétien se faisait du monde musulman. Cette version a servi de texte de départ aux nombreuses traductions qui ont suivi. La première traduction française, datant de 1556, est réalisée par Jean Temporal, éditeur et imprimeur lyonnais. La deuxième, parue en 1956 et rééditée en 1980, est l’œuvre d’Alexis Épaulard; elle s’appuie partiellement sur le manuscrit original, mais aussi sur la version imprimée de Ramusio. Notre travail consiste à confronter les deux traductions françaises à l’édition de Ramusio. Nous tenterons de démontrer que les deux traducteurs français sont lourdement intervenus dans le texte traduit, et ce afin de servir des desseins expansionnistes et colonialistes. Notre recherche met en évidence la prise de position des traducteurs et les idéologies qui affectent l’appréciation du livre. Pour ce faire, nous procédons à l’analyse des traductions au niveau textuel et au niveau paratextuel tout en mettant en évidence le contexte historique et politico-idéologique entourant la parution de ces deux traductions françaises. Nous consacrons une attention toute particulière au choix des mots, aux allusions et aux stratégies utilisées par les traducteurs et les éditeurs. Les travaux de Maria Tymoczko sur la traduction et l’engagement politique fournissent le cadre de référence théorique de cette recherche, tout autant que les textes d’Edward Said sur l’orientalisme et le postcolonialisme. Il ressort de cette recherche que ces traductions françaises sont empreintes d’une idéologie eurocentrée visant à conforter les ambitions hégémoniques en terre africaine.

Implementação de um sistema de sustentabilidade no VILA VITA Parc Resort & SPA

Atualmente os clientes estão mais evoluídos, informados e exigentes. Os processos de seleção dos fornecedores alteraram-se profundamente, o consumo dos produtos/serviços acontece de forma antecipada e obedece a múltiplas variáveis com particular destaque para as imagens reproduzidas na mente dos consumidores. A seleção dos produtos passa por isso, a ser feita sem o recurso a intermediários alterando o paradigma da promoção e distribuição. No seguimento do primeiro ano de estudos teóricos em Gestão e Direção Hoteleira, o segundo ano baseou-se numa experiência de estágio com duração de nove meses, realizado no VILA VITA Parc Resort & SPA no Algarve, cujo principal objetivo foi desenvolver o conhecimento teórico adquirido ao longo do percurso académico e ainda as reforçar competências adquiridas previamente. Neste sentido, o estágio decorreu por diversos departamentos, tais como: Sales & Marketing, Financeiro, Alojamentos, Recursos Humanos, Food & Beverage, Qualidade e Ambiente e Assistente de Direção Geral. Na sequência do referido anteriormente, é também objetivo o desenvolvimento de um desafio, que se baseou na identificação de uma janela de oportunidade para uma intervenção na área da operação, e desenvolvimento da mesma. A diferenciação ambiental é um dos fatores cada vez mais procurados por quem procura um hotel. Caso o mesmo consiga a junção entre o luxo e conforto e a redução de desperdício de energia e recursos é um fator de diferenciação exponencial. No decorrer do estágio, o tema para o desafio desenvolveu-se e deu origem à ideia de implementar um sistema de sustentabilidade no resort. Os objetivos inerentes à aplicação do referido anteriormente estão relacionados com o posicionamento do resort no mercado, a formação ambiental dos colaboradores e com sistemas de reciclagem de resíduos: Velas, cartão e papel, plástico e metal, vidro, rolhas, óleos alimentares usados e tinteiros e toneres. Este método de sustentabilidade teve a duração prática de seis meses (Janeiro a Junho 2015) e através do mesmo foram obtidos resultados bastantes satisfatórios no que diz respeito às vantagens económicas associadas (€5959.57) e à preservação do meio-ambiente.

Desempenho de genótipos de girassol em Jaguariúna - SP - Análise preliminar.

A cultura do girassol vem se destacando no Brasil e um dos principais motivos para este crescimento é seu uso como matéria-prima no Programa Nacional de Produção e uso do Biodiesel. O objetivo deste trabalho foi avaliar o desempenho produtivo de 12 genótipos de girassol (HLS 01; HLE 11; HELIO 358; EMBRAPA 122; BRSGIRA 01; BRSGIRA 09; SRM 822; TRITON MAX; ZENIT; AGROBEL 960; MG 52 e M 734) na região de Jaguariúna-SP. Os materiais foram avaliados através das seguintes características agronômicas: produtividade (kg.ha-1), produção por capítulo (g), diâmetro do capítulo (m), altura da planta (m) e altura do capítulo (m). Os genótipos apresentaram altos rendimentos (média de 2869 kg ha-1), sem diferirem estatisticamente entre si; o que nos leva a concluir que na região de Jaguariúna - SP há grande potencial de cultivo do girassol, sendo inclusive, uma possível opção para o plantio em sucessão à cana de açúcar.

Avaliação de progênies de mamona (Ricinus communis L.) para produção e rendimento de semente em condições de safrinha no Estado de São Paulo.

Foi instalado um ensaio de avaliação de 73 progênies do Programa de Melhoramento de mamona do Instituto Agronômico para dias para florescimento dos racemos, produção de grãos e rendimento de grãos, em Campinas-SP, em fevereiro, e avaliado na safrinha de 2007, em blocos casualisados com três repetições, incluindo sete testemunhas comerciais. A análise de variância e a distribuição de médias para produção de grãos evidenciaram a larga variabilidade e o potencial dos materiais para o melhoramento. As progênies mais produtivas foram: PB72II com 804,07 g; PB05II com 755,20 g; TS38 com 716,13 g; PB08II com 714,67 g e PB48 com 698,00 g, e não foram melhores que a testemunha mais produtiva, IAC 2028 com 1019,67 g. Os rendimentos no processamento das sementes foram bastante variados e refletiram a ocorrência de déficits hídricos de severidade moderada, com alto número de sementes chochas ou não granadas. Os resultados mostraram o elevado potencial para o melhoramento do conjunto de progênies estudado e a possibilidade de plantio da cultura da mamona em condição de safrinha no Sudeste do Brasil.

Caracterização de progênies de mamona (Ricinus communis L.) para arquitetura de planta em condições de safrinha no Estado de São Paulo.

A arquitetura da mamoneira é bastante variável, constituída por caracteres que apresentam, geralmente, herança independente que se encontram distribuídos pelo germoplasma da espécie. Variações nos padrões de arquitetura das plantas de mamona possibilitam novas distribuições espaciais na implantação da cultura, viabilizando diferentes métodos de cultivo e novas épocas de semeadura para a espécie. Foi instalado um ensaio de avaliação com 73 progênies do Programa de Melhoramento de Mamona do Instituto Agronômico - IAC e sete materiais comerciais como testemunhas intercalares. O delineamento experimental foi em blocos casualisados com três repetições e as parcelas foram semeadas em fevereiro de 2007, em Campinas, SP. Foram avaliados os caracteres: altura da planta, altura do racemo primário, altura do racemo secundário, diâmetro do caule, número de entrenós e tamanho de entrenós. Os resultados da análise de variância e a distribuição de médias para os caracteres avaliados evidenciaram a larga variabilidade e o potencial dos materiais para o melhoramento, além da possibilidade de cultivo da mamona em condição de safrinha no Sudeste do Brasil.

Avaliação da arquitetura dos racemos e produção de progênies de mamona (Ricinus communis L.) em condições de safrinha no Estado de São Paulo.

Foi instalado um ensaio de avaliação com 73 progênies do Programa de Melhoramento de Mamona do Instituto Agronômico - IAC e sete materiais comerciais como testemunhas intercalares. O delineamento experimental foi em blocos casualisados com três repetições e as parcelas foram plantadas em fevereiro de 2007, em Campinas, SP. Foram avaliadas as características dos racemos primários e secundários: quanto ao comprimento (CRP e CRS, em centímetros), número de frutos (NFRP e NFRS), produção de grãos (PRP e PRS, em gramas) e rendimento no descascamento (RRP e RRS, em %) de cinco plantas de 73 progênies de mamona desenvolvidas pelo Programa de Melhoramento. Foram conduzidas análises de variâncias sendo as progênies separadas pelo grupo de seleção sendo 42 da seleção PBII, 15 da seleção PB e 16 da seleção TS. Embora as condições ambientais não favoráveis da safrinha tenham contribuído para o elevado coeficiente de variação observado para alguns caracteres, quadrados médios altamente significativos, para caracteres do racemo primário, foram encontrados para diferença entre médias de Genótipos, Genótipos dentro de PBII e entre Seleções, exceto para número de frutos que foi não significativo. Nos caracteres do racemo secundário, foram encontrados testes F altamente significativos (P<0,01) para diferenças entre Genótipos e entre Genótipos dentro do grupo PBII. Diferenças não significativas foram detectadas entre Seleções e entre Genótipos dentro do Grupo PB, exceto para rendimento no descascamento que apresentou P<0,05. São apresentadas as distribuições de médias para os caracteres.