Dimensionamento preliminare di un UAV e progettazione di un sistema di folding wing

L'elaborato descrive la metodologia utilizzata per il dimensionamento preliminare di un velivolo a pilotaggio remoto caratterizzato da un sistema propulsivo costituito da due motori a benzina. Successivamente viene trattata la progettazione concettuale di metodi per la riduzione degli ingombri dovuti all'ala quando il velivolo è al suolo.

Energy harvesting from piezoelectric devices embedded in a 3D printed wing

This thesis work has been carried out at Clarkson University in Potsdam NY, USA and involved the design of a low elongation wing, consisting of parts made by polylactide (PLA) using the fused deposition model (FDM) technology of Rapid Prototyping, then assembled together in a thin aluminum spar. The aim of the research is to evaluate the feasibility of collecting electrical energy by converting mechanical energy from the vibration of the wing flutter. With this aim piezoelectric stripes were glued in the inner part of the wing, as well as on the aluminum spar, as monomorphic configuration. During the phases of the project, particular attention was given to the geometry and the materials used, in order to trigger the flutter for low flow velocity. The CAD software SolidWorks® was used for the design of the wing and then the drawings were sent to the Clarkson machine shop in order to to produce the parts required by the wing assembly. FEM simulations were performed, using software MSC NASTRAN/PATRAN®, to evaluate the stiffness of the whole wing as well as the natural vibration modes of the structure. These data, in a first approximation, were used to predict the flutter speed. Finally, experimental tests in the Clarkson wind tunnel facility were carried out in order to validate the results obtained from FEM analysis. The power collected by the piezoelectrics under flutter condition was addressed by tuning the resistors downstream the electronic circuit of the piezoelectrics.

Mandibula wing osteotomy for correction of the mandibular plane: A case report

We report a new technique for vertical enlargement of the inferior border of the mandible.

Localization of Deformed Wing Virus (DWV) in the Brains of Apis mellifera (European Honey Bees)

The purpose of the current research project is to design a successful in-situ hybridization to identify regions within the brains of honeybees where DWV replicates. The localization of the virus in the brains of the bees can draw a connection between CCDand DWV.In conclusion, these results demonstrate that in bees infected with DWV the virus replicates actively in very important regions of the brain, including neuropils that are responsible for vision and olfaction. This means that the virus could adversely affect the vision and olfaction of the honeybees making it difficult for bees to behave normally.

Subcellular Localization of the Non-Structural Proteins 3C and 3CD of the Honeybee Virus Deformed Wing Virus

Apis mellifera L., the European honeybee, is a crucial pollinator of many important agricultural crops in the United States. Recently, honeybee colonies have been affected by Colony Collapse Disorder (CCD), a disorder in which the colony fails due to the disappearance of a key functional group of worker bees. Though no direct causalrelationship has been confirmed, hives that experience CCD have been shown to have a high incidence of Deformed Wing Virus (DWV), a common honeybee virus. While the genome sequence and gene-order of DWV has been analyzed fairly recently, few other studies have been performed to understand the molecular characterization of the virus.Since little is known about where DWV proteins localize in infected host cells, the objective of this project was to determine the subcellular localization of two of the important non-structural proteins that are encoded in the DWV genome. This project focused on the protein 3C, an autocatalytic protease which cleaves itself from a longer polyprotein and helps to cut all of the other proteins apart from one another so that they can become functional, and 3D, the RNA-dependent RNA polymerase (RdRp) which is critical for replication of the virus because it copies the viral genome. By tagging nested constructs containing these two proteins and tracking where they localized in living cells, this study aimed to better understand the replication of DWV and to elicit possible targetsfor further research on how to control the virus. Since DWV is a picorna-like virus, distantly related to human viruses such as polio, and picornavirus non-structural proteins aggregate at cellular membranes during viral replication, the major hypothesis was that the 3C and 3CD proteins would localize at cellular organelle membranes as well. Using confocal microscopy, both proteins were found to localize in the cytoplasm, but the 3CDprotein was found to be mostly diffuse cytoplasmic, and the 3C protein was found to localize more specifically on membranous structures just outside of the nucleus.

How Much Is Enough? an Analysis of the 5' Nontranslated Region of the Deformed Wing Virus in Honeybees

Honeybees are an essential component of today¿s agricultural system because of their role as pollinators. However, viruses, including a member of the Picornavirales order known commonly as Deformed Wing Virus (DWV), are compromising the health of honeybee colonies. Many picornaviruses, such as poliovirus, have been studied in depth because of their relation to human disease, but also because of their use of an Internal Ribosome Entry Site (IRES) to initiate translation. The primary goal of this thesis was to determine if the 5¿ Non-Translated Region (NTR) of Deformed Wing Virus (DWV) functions as an IRES. A secondary goal was to determine if there are specific parts of that 5¿ NTR that are important to IRES function. Six plasmids were constructed by inserting three different sections of the 5¿ NTR of DWV, in both sense and antisense directions, between two reporter genes. These plasmids, along with several control plasmids, were transfected into Sf9 cells, and post-transfection luciferase assays were conducted. Results were inconclusive. This could have been due to an inability of the plasmids to be expressed in Sf9 cells, an error in the construction of the plasmids, or a mechanical error in the assay procedure. At this time it appears most likely that the 5¿ NTR of DWV may be cell-type or species specific, and the next step would be to transfect the plasmids into a recently developed cultured honeybee cell line.

Nonlethal Screening of Bat-Wing Skin with the Use of Ultraviolet Fluorescence to Detect Lesions Indicative of White-Nose Syndrome

Definitive diagnosis of the bat disease white-nose syndrome (WNS) requires histologic analysis to identify the cutaneous erosions caused by the fungal pathogen Pseudogymnoascus [formerly Geomyces] destructans (Pd). Gross visual inspection does not distinguish bats with or without WNS, and no nonlethal, on-site, preliminary screening methods are available for WNS in bats. We demonstrate that long-wave ultraviolet (UV) light (wavelength 366-385 nm) elicits a distinct orange yellow fluorescence in bat-wing membranes (skin) that corresponds directly with the fungal cupping erosions in histologic sections of skin that are the current gold standard for diagnosis of WNS. Between March 2009 and April 2012, wing membranes from 168 North American bat carcasses submitted to the US Geological Survey National Wildlife Health Center were examined with the use of both UV light and histology. Comparison of these techniques showed that 98.8% of the bats with foci of orange yellow wing fluorescence (n=80) were WNS-positive based on histologic diagnosis; bat wings that did not fluoresce under UV light (n=88) were all histologically negative for WNS lesions. Punch biopsy samples as small as 3 mm taken from areas of wing with UV fluorescence were effective for identifying lesions diagnostic for WNS by histopathology. In a nonlethal biopsy-based study of 62 bats sampled (4-mm diameter) in hibernacula of the Czech Republic during 2012, 95.5% of fluorescent (n=22) and 100% of nonfluorescent (n=40) wing samples were confirmed by histopathology to be WNS positive and negative, respectively. This evidence supports use of long-wave UV light as a nonlethal and field-applicable method to screen bats for lesions indicative of WNS. Further, UV fluorescence can be used to guide targeted, nonlethal biopsy sampling for follow-up molecular testing, fungal culture analysis, and histologic confirmation of WNS.

Clinical signs of deformed wing virus infection are predictive markers for honey bee colony losses.

The ectoparasitic mite Varroa destructor acting as a virus vector constitutes a central mechanism for losses of managed honey bee, Apis mellifera, colonies. This creates demand for an easy, accurate and cheap diagnostic tool to estimate the impact of viruliferous mites in the field. Here we evaluated whether the clinical signs of the ubiquitous and mite-transmitted deformed wing virus (DWV) can be predictive markers of winter losses. In fall and winter 2007/2008, A.m. carnica workers with apparent wing deformities were counted daily in traps installed on 29 queenright colonies. The data show that colonies which later died had a significantly higher proportion of workers with wing deformities than did those which survived. There was a significant positive correlation between V. destructor infestation levels and the number of workers displaying DWV clinical signs, further supporting the mite's impact on virus infections at the colony level. A logistic regression model suggests that colony size, the number of workers with wing deformities and V. destructor infestation levels constitute predictive markers for winter colony losses in this order of importance and ease of evaluation.

Distribution and variability of deformed wing virus of honeybees (Apis mellifera) in the Middle East and North Africa.

Three hundred eleven honeybee samples from twelve countries in the Middle East and North Africa (MENA) (Jordan, Lebanon, Syria, Iraq, Egypt, Libya, Tunisia, Algeria, Morocco, Yemen, Palestine and Sudan) were analyzed for the presence of deformed wing virus (DWV). The prevalence of DWV throughout the MENA region was pervasive, but variable. The highest prevalence was found in Lebanon and Syria, with prevalence dropping in Palestine, Jordan and Egypt before increasing slightly moving westwards to Algeria and Morocco Phylogenetic analysis of a 194 nucleotide section of the DWV Lp gene did not identify any significant phylogenetic resolution among the samples, although the sequences did show consistent regional clustering, including an interesting geographic gradient from Morocco through North Africa to Jordan and Syria. The sequences revealed several clear variability hotspots in the deduced amino acid sequence, that furthermore showed some patterns of regional identity. Furthermore, the sequence variants from the Middle East and North Africa appear more numerous and diverse than those from Europe. This article is protected by copyright. All rights reserved.

Sea ice thickness from airborne electromagnetic (EM) induction sounding acquired from fixed-wing aircraft POLAR 5 surveys from several airports in Spitsbergen, Greenland, Canada and Alaska

While summer Arctic sea-ice extent has decreased over the past three decades, it is subject to large interannual and regional variations. Methodological challenges in measuring ice thickness continue to hamper our understanding of the response of the ice-thickness distribution to recent change, limiting the ability to forecast sea-ice change over the next decade. We present results from a 2400 km long pan-Arctic airborne electromagnetic (EM) ice thickness survey in April 2009, the first-ever large-scale EM thickness dataset obtained by fixed-wing aircraft over key regions of old ice in the Arctic Ocean between Svalbard and Alaska. The data provide detailed insight into ice thickness distributions characteristic for the different regions. Comparison with previous EM surveys shows that modal thicknesses of old ice had changed little since 2007, and remained within the expected range of natural variability.