957 resultados para water production


Relevância:

60.00% 60.00%

Publicador:

Resumo:

No interior dos reservatórios petrolíferos, o efeito da gravidade produz naturalmente a segregação dos fluidos presentes. Em razão basicamente das forças capilares não existe uma superfície definida de separação entre cada dois fluidos. No entanto, é comum na engenharia de petróleo admitir-se uma superfície convencional de separação dos fluidos. À essa superfície dá-se o nome de interface fluida ou contato fluido. A obtenção da localização dos contatos fluidos no interior dos reservatórios, como os contatos óleo-água, contatos gás-água e os contatos gás-óleo, sem a interpretação completa dos perfis geofísicos ou a realização dos procedimentos diretos dos testes de formação é um problema de difícil solução para a indústria do petróleo. O posicionamento em profundidade dos contatos pode ser utilizado para a definição dos procedimentos de completação do poço e para o posicionamento do canhoneio nos horizontes produtores dos poços verticais. Temos também a aplicação do mapeamento deste parâmetro, para os projetos e controle da perfuração no caso dos poços direcionais e horizontais, que utilizam tal informação para o posicionamento do eixo do poço no interior da zona de hidrocarboneto no reservatório, a fim de se evitar, principalmente, a produção de água. Este trabalho apresenta uma metodologia para a identificação e posicionamento dos contatos fluidos, através da aplicação da técnica da estatística multivariada, chamada de análise discriminante. Nesta aplicação, faz-se uso direto dos perfis de resistividade (RT), de raios gama natural (RG), de densidade (ρb), de porosidade neutrônica (ΦN), de caliper (Cal) e do perfil de volume de argila (Vcla), como dados de entrada no programa de análise discriminante. Para o caso de depósitos clásticos, com seqüências arenito-folhelho, a análise discriminante fornece ainda a indicação da litologia e as espessuras aparentes dos reservatórios. As curvas de perfis geofísicos aplicadas para a avaliação desta metodologia são provenientes de poços perfurados na bacia do lago Maracaibo, na Venezuela, onde, segundo estudos geológicos, existe a ocorrência de seqüências estratigráficas, com camadas de folhelhos e arenitos, sendo também confirmada a presença de hidrocarbonetos nos poços utilizados neste trabalho.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEG

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The aim of this study was to investigate the performance of an experimental rainwater treatment system for non-potable uses. Without the first-flush discharge it was expected to control the quality of captured rainwater and to minimize the rainwater by-pass caused by the first-flush strategy. A full-scale direct filtration unit was operated and a solution of natural corn starch was used as the primary coagulant. The color, turbidity e coliform efficiencies of the unit was analyzed based on filtration loads and the net water production was estimated. The results pointed out turbidity removal up to 70.8% and color removal up to 61.0%. The backwash of the filtering system was completed in 3 minutes at the rate of 1,440 m3/m2day with consumption of treated water from 0.5% to 2.2%, based on the potentially harvesting.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The morphometric characterization of watersheds is of great importance in assisting the planning of these areas to preserve the environment and maintain the quantity and quality of water production. The aim of this study was to characterize the morphology and simulate the areas of permanent preservation according to the Brazilian Forest Code of watershed of the Água-Fria stream. The studied area is located in the municipality of Bofete-SP, between the geographic coordinates: 48° 09' 30" to 48° 18' 30" longitude (WGr) and 22° 58' 30" to 23° 04' 30" latitude S. The results showed a 5th order micro watershed with an area of 152.43 km2 and low drainage density of 1.04 km/km2. Circularity was 0.51 and form factor was 0.41, which is considered low, and therefore with an oblong/oval shape. The sinuosity index of 1.29 revealed a tendency of rectilinear channels with compactness coefficient value of 1.38 and distance of runoff flow of 520m. Simulation of areas of permanent preservation shows an ideal model as the way springs and watercourses should be protected according to the Brazilian Forest Code, amounting to an area of 10.02 km2.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEG

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This work aimed to carry out a study of the environmental conditions of the Permanent Preservation Areas (PPAs) in the sub-basin of Marimbondo Stream in the city of Jales (SP), through remote sensing techniques and taking as the basis Brazilian environmental legislation, the Forest Code Federal Law Nº 12,651/2012. Permanent Preservation Areas are inserted intrinsically improved conditions in the quantity and quality of water in the areas of springs and along water bodies in rural properties. Therefore, we also carried out studies on the new Forest Code compared to the old Federal Law Order no. 4771/1965 and the observation of its application in the area of sub-basin as well as carrying out the simulation. The results of this research allowed toverify the need for direct implementation of the monitoring measures with the Forest Code, and this water management tool in Brazil, which will ensure sustainable management practices of land use and land cover, with direct benefits to water production, mainly for public supply. Also there was a greater need for involvement by the public actors, the Basin Committee of the São José dos Dourados and the municipal government of Jales, in order to truly act aimed at the protection and maintenance of the water body Stream Wasp

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Pós-graduação em Geografia - IGCE

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This work aimed to carry out a study of the environmental conditions of the Permanent Preservation Areas (PPAs) in the sub-basin of Marimbondo Stream in the city of Jales (SP), through remote sensing techniques and taking as the basis Brazilian environmental legislation, the Forest Code Federal Law Nº 12,651/2012. Permanent Preservation Areas are inserted intrinsically improved conditions in the quantity and quality of water in the areas of springs and along water bodies in rural properties. Therefore, we also carried out studies on the new Forest Code compared to the old Federal Law Order no. 4771/1965 and the observation of its application in the area of sub-basin as well as carrying out the simulation. The results of this research allowed toverify the need for direct implementation of the monitoring measures with the Forest Code, and this water management tool in Brazil, which will ensure sustainable management practices of land use and land cover, with direct benefits to water production, mainly for public supply. Also there was a greater need for involvement by the public actors, the Basin Committee of the São José dos Dourados and the municipal government of Jales, in order to truly act aimed at the protection and maintenance of the water body Stream Wasp

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Pós-graduação em Geografia - IGCE

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Trigeneration systems have been used with advantage in the last years in distributed electricity generation systems as a function of a growth of natural gas pipeline network distribution system, tax incentives, and energy regulation policies. Typically, a trigeneration system is used to produce electrical power simultaneously with supplying heating and cooling load by recovering the combustion products thermal power content that otherwise would be driven to atmosphere. Concerning that, two small scale trigeneration plants have been tested for overall efficiency evaluation and operational comparison. The first system is based on a 30 kW (ISO) natural gas powered microturbine, and the second one uses a 26 kW natural gas powered internal combustion engine coupled to an electrical generator as a prime mover. The stack gases from both machines were directed to a 17.6 kW ammonia-water absorption refrigeration chiller for producing chilled water first and next to a water heat recovery boiler in order to produce hot water. Experimental results are presented along with relevant system operational parameters for appropriate operation including natural gas consumption, net electrical and thermal power production, i.e., hot and cold water production rates, primary energy saving index, and the energy utilization factor over total and partial electrical load operational conditions. (c) 2011 Elsevier Ltd. All rights reserved.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Polycarbonate (PC) is an important engineering thermoplastic that is currently produced in large industrial scale using bisphenol A and monomers such as phosgene. Since phosgene is highly toxic, a non-phosgene approach using diphenyl carbonate (DPC) as an alternative monomer, as developed by Asahi Corporation of Japan, is a significantly more environmentally friendly alternative. Other advantages include the use of CO2 instead of CO as raw material and the elimination of major waste water production. However, for the production of DPC to be economically viable, reactive-distillation units are needed to obtain the necessary yields by shifting the reaction-equilibrium to the desired products and separating the products at the point where the equilibrium reaction occurs. In the field of chemical reaction engineering, there are many reactions that are suffering from the low equilibrium constant. The main goal of this research is to determine the optimal process needed to shift the reactions by using appropriate control strategies of the reactive distillation system. An extensive dynamic mathematical model has been developed to help us investigate different control and processing strategies of the reactive distillation units to increase the production of DPC. The high-fidelity dynamic models include extensive thermodynamic and reaction-kinetics models while incorporating the necessary mass and energy balance of the various stages of the reactive distillation units. The study presented in this document shows the possibility of producing DPC via one reactive distillation instead of the conventional two-column, with a production rate of 16.75 tons/h corresponding to start reactants materials of 74.69 tons/h of Phenol and 35.75 tons/h of Dimethyl Carbonate. This represents a threefold increase over the projected production rate given in the literature based on a two-column configuration. In addition, the purity of the DPC produced could reach levels as high as 99.5% with the effective use of controls. These studies are based on simulation done using high-fidelity dynamic models.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Context. The complex shape of comet 67P and its oblique rotation axis cause pronounced seasonal effects. Irradiation and hence activity vary strongly. Aims. We investigate the insolation of the cometary surface in order to predict the sublimation of water ice. The strongly varying erosion levels are correlated with the topography and morphology of the present cometary surface and its evolution. Methods. The insolation as a function of heliocentric distance and diurnal (spin dependent) variation is calculated using >10(5) facets of a detailed digital terrain model. Shading, but also illumination and thermal radiation by facets in the field of view of a specific facet are iteratively taken into account. We use a two-layer model of a thin porous dust cover above an icy surface to calculate the water sublimation, presuming steady state and a uniform surface. Our second model, which includes the history of warming and cooling due to thermal inertia, is restricted to a much simpler shape model but allows us to test various distributions of active areas. Results. Sublimation from a dirty ice surface yields maximum erosion. A thin dust cover of 50 pm yields similar rates at perihelion. Only about 6% of the surface needs to be active to match the observed water production rates at perihelion. A dust layer of 1 mm thickness suppresses the activity by a factor of 4 to 5. Erosion on the south side can reach more than 10 m per orbit at active spots. The energy input to the concave neck area (Hapi) during northern summer is enhanced by about 50% owing to self-illumination. Here surface temperatures reach maximum values along the foot of the Hathor wall. Integrated over the whole orbit this area receives the least energy input. Based on the detailed shape model, the simulations identify "hot spots" in depressions and larger pits in good correlation with observed dust activity. Three-quarters of the total sublimation is produced while the sub-solar latitude is south, resulting in a distinct dichotomy in activity and morphology. Conclusions. The northern areas display a much rougher morphology than what is seen on Imhotep, an area at the equator that will be fully illuminated when 67P is closer to the Sun. Self-illumination in concave regions enhance the energy input and hence erosion. This explains the early activity observed at Hapi. Cliffs are more prone to erosion than horizontal, often dust covered, areas, which leads to surface planation. Local activity can only persist if the forming cliff walls are eroding. Comet 67P has two lobes and also two distinct sides. Transport of material from the south to the north is probable. The morphology of the Imhotep plain should be typical for the terrains of the yet unseen southern hemisphere.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

This study presents the results of high-resolution sedimentological and clay mineralogical investigations on sediments from ODP Sites 908A and 909AlC located in the central Fram Strait. The objective was to reconstruct the paleoclimate and paleoceanography of the high northern latitudes since the middle Miocene. The sediments are characterised in particular by a distinctive input of ice-rafted material, which most probably occurs since 6 Ma and very likely since 15 Ma. A change in the source area at 1 1.2 Ma is clearly marked by variations within clay mineral composition and increasing accumulation rates. This is interpreted as a result of an increase in water mass exchange through the Fram Strait. A further period of increasing exchange between 4-3 Ma is identified by granulometric investigations and points to a synchronous intensification of deep water production in the North Atlantic during this time interval. A comparison of the components of coarse and clay fraction clearly shows that both are not delivered by the Same transport process. The input of the clay fraction can be related to transport mechanisms through sea ice and glaciers and very likely also through oceanic currents. A reconstruction of source areas for clay minerals is possible only with some restrictions. High smectite contents in middle and late Miocene sediments indicate a background signal produced by soil formation together with sediment input, possibly originating from the Greenland- Scotland Ridge. The applicability of clay mineral distribution as a climate proxy for the high northern latitudes can be confirmed. Based on a comparison of sediments from Site 909C, characterised by the smectite/illite and chlorite ratio, with regional and global climatic records (oxygen isotopes), a middle Miocene cooling phase between 14.8-14.6 Ma can be proposed. A further cooling phase between 10-9 Ma clearly shows similarities in its Progress toward drastic decrease in carbonate sedimentation and preservation in the eastern equatorial Pacific. The modification in sea water and atmosphere chemistry may represent a possible link due to the built-up of equatorial carbonate platforms. Between 4.8-4.6 Ma clay mineral distribution indicates a distinct cooling trend in the Fram Strait region. This is not accompanied by relevant glaciation, which would otherwise be indicated by the coarse fraction. The intensification of glaciation in the northern hemisphere is distinctly documented by a rapid increase of illite and chlorite starting from 3.3 Ma, which corresponds to oxygen isotope data trends from North Atlantic.