Anomalous n-type electrical behaviour of Pd-contacted CNTFET fabricated on small-diameter nanotube.

A Pd-contacted dopant-free CNTFET with small-diameter (0.57 nm) carbon nanotube showing an anomalous n-type electrical characteristic is reported for the first time. This observed behaviour is attributed to a carbon nanotube work function higher than (or close to) palladium as well as a large hole-to-electron effective mass ratio of approximately 2.5 predicted by hybridization in small-diameter nanotubes. A variation of the conduction type with temperature is also observed and is attributed to an increase of the palladium work function and decrease of the CNT work function with increasing temperature.

On the eye diameter-total length relationship of the Indian mackerel Rastrelliger kanagurta (Cuvier)

Results of studies of chemical, bacteriological and organoleptic quality of cured fish collected from four major curing centres along the Tamil Nadu coast are reported. Only 32.43% of the samples had moisture level below 35%, 0.9% had salt 25% and above. None of the samples showed acid insoluble ash below 1.5%. The main defects were unhygienic processing, inadequate salting, use of poor quality salt and incomplete drying. Recommendations for improvement of quality are given.

Use of eye lens diameter and weight as an age indicator in the carangid fish, Decapterus russelli (Pisces: Carangidae) from Gulf of Oman: preliminary observation

Specimens of Decapterus russelli have been collected from Lema, north of the Gulf of Oman. The ocular lens diameter and weight were tested as an additional age indicator to those already in use. The results showed that this technique could be adopted for determining the age of the species Decapterus russelli when the specimens are in the second year of age in case of eye lens diameter. On the other hand, eye lens weight failed to separate between the four age groups observed. The method is especially useful for age determination when otolith or scale ring are not visible or when false rings give erroneous reading.

The survey of sexual maturity in Mugil cephalus so measuring sex hormones and histologic studies

In this study the process of female gray mullet brooders was carried out by using histological study and masurment of sex steroids. Results of histological studies showed that oocyte of gray mullet brooders in Gomishan Rearing Center conditions of develop to the end of yolk globule stage. The results were observed with oocyte in chromatin nucleolar stage (first stage) with means of diameter of 20 p m, in August, perinucleolar stage (second stage) in September with mean diameter of 87 p m, yolk vesicle stage (third stage) in October with mean diameter 200 p m and yolk granules stage (forth stage) from October to November with average diameter of 180 — 650 p m. For the reason of stopping oocyte develop at the end of fourth stage, hormonal induction to final oocyte maturation and ovulation was used. For this purpose, carp pituitary , HCG and LRH-A2 with different combinations were used in two stages, second injection was used 24 hours after first injection. 15 females brooders were divided in 5 groups, different hormonal combinations were injected to four groups and to fifth group as control, only saline, was injected. The process of female brooder rippening in hormonal induction was studied via masurment of sex steroids including 17 a - hydroxy progestrone, estradio1-17)6 and testosterone. Blood samples were collected from caudal vein during first injection, 24, 30 and 48 hours after the first injection. At the same time, for distinguishing histological changes the sample has been attained from the gonads Sex stroid fluctuation patterns in different brooder groups that injected hormon were similar, however hormonal composition had similar effects. All brooder that their oocyte in the beginning of hormonal injection were At the end of fourth stage with oocyte diameter average of 600 p m received to final maturation and ovulation. The brooder that its oocytes were At the begining or mid-fourth stage did not show ovulation but hormonal induction caused oocyte develop at the beginning of fifth stage. Study of 17-hydroxy progestrone fluctuation showed that the maximum level of this steroid (0.347 ng/ml) measured 30 hours after the first injection and was significantly higher (p< 0.05) than those of control group. So, 17-hydroxy progestrone is probably precursor of maturation inducing steroid (MIS). However the maximum level of that observed was coincident with germinal vesicle breakdown, oil droplets coalescence and dissolution of yolk granuls The maximum levels of esteradiol— 17/0 and testosterone (3.778 and 16.801ng/ml,respectively) in spawned brooders,were observed 24 hours after the first injection. levels of those steroids were significantly higher (p<0.05) than control group. Maximum level of sex steroids in the brooders that did not spawn to the end of treatment was observed with more delay than those in spawned brooders. Therefor maximum level of 17a-hydroxy progestrone (0.264 ng/ml) in those brooders observed in fourth sampling time and the maximum levels of estradio1-17a and testosterone (2.944 and 18.993 ng/ml, respectivly)observed in third sampling time that was significantly higher (p<0.05) than those of control group. For the study of stress effect on brooders during the hormonal induction, level of cortisol was measured in every sampling time. level of cortisol had high fluctuation that showed handling level and stress effect on brooders. However maximum level of cortisol in majority of brooders was dominant in third sampling time that was coincident with final maturation.

Small-diameter membrane reflector wrinkling

This study concerns the wrinkling performance of thin membranes for use as novel reflectors in space-based telescopes. We introduce small-scale experiments for inducing and interrogating wrinkling patterns in at membranes, and we capture these details computationally by performing a range of finite element analysis. The overall aim is to assess the sophistication of modelling, to verify the feasibility of a small-diameter reector concept proposed in accompanying work. © 2009 by the American Institute of Aeronautics and Astronautics, Inc.

Effect of buried depth and diameter on uplift of underground structures in liquefied soils

In an earthquake, underground structures located in liquefiable soil deposits are susceptible to floatation following an earthquake event due to their lower unit weight relative to the surrounding saturated soil. The uplift displacement of an underground structure in liquefiable soil deposit can be affected by the buried depth and size of the structure. Dynamic centrifuge tests have been carried out to investigate the influence of these factors by measuring the uplift displacement of shallow model circular structures. Ratios for the buried depth and diameter effects of the structure are introduced to compare the uplift displacement in different soil and earthquake conditions. With the depth effect and diameter effect ratios, the uplift displacement of a buoyant structure in liquefiable soil can also be estimated based on performance of similar structures in comparable soil condition and subjected to a similar earthquake event. © 2012 Elsevier Ltd.

The investigation of sweeping speed on the magnetization of a 2 inches diameter YBa2Cu3O7-δ thin film with the circular-type magnetic flux pump

A circular-type magnetic flux pump (CTMFP) device was built to study the flux dynamics on a 2-inch-diameter YBCO thin film. This CTMFP is composed of two CTMFP coils, with each CTMFP coil containing concentric three-phase windings and a dc winding. We connected the three-phase windings to the output of a commercial inverter. By changing the output frequency of the inverter, the sweeping speed of the circular-shaped travelling magnetic wave can be changed. The connection of the phase coils follows the forward consequence, so that the circular-shaped travelling magnetic wave travels inward to the center. The output frequency f was changed from f = 0.01 to 1000.0 Hz. The YBCO sample was sandwiched between the two CTMFP coils to experience the circular-shaped travelling magnetic wave. It was found that the increase of the flux density in the center of the film is independent of the sweeping frequency. In high frequency f = 1000.0Hz, even if the waveform had changed a lot, the increment is still the same as in low frequencies. © 2012 IEEE.

Vortex migration caused by travelling magnetic wave in a 2 in. diameter YBa2Cu3O7-δ thin film

We provide experimental evidence for a vortex migration phenomenon in YBa2Cu3O7-δ (YBCO) thin film caused by travelling magnetic wave. The experiment is carried out on a 2 in. diameter YBCO thin film with a circular-type magnetic flux pump. We found that the travelling wave helps the vortices migrate into the centre of the sample: after the zero-field cooling process, the increase of the flux density in the centre is four times larger than the amplitude of the travelling wave. The reason for this massive vortex migration is probably due to the magnetic stress variation caused by the travelling wave: the magnetic stress increases locally in the crest region while decreases locally in the trough region, which could help the vortices to move locally. A comparison shows that the magnetization by standing wave can be easily predicted by Bean's model while travelling wave causes vortex migration generally much larger than the prediction of Bean's model. It is possible that travelling magnetic wave can be an effective way to magnetize a type II superconductor in considering this unusual vortex dynamics. © 2013 AIP Publishing LLC.

Diameter and wall number control of carbon nanotubes by chemical vapor deposition

We analyze the relationship between the average wall number (N) and the diameter (d) for carbon nanotubes (CNTs) grown by chemical vapour deposition. It is found that N depends linearly on d for diameters in the range of 2.5-10 nm, while single wall nanotubes predominate for diameters under about 2.1 nm. The linear relationship is found to depend somewhat on the growth conditions. It is also verified that the mean diameter depends on the diameter of the originating catalyst nanoparticle, and thus on the initial catalyst thickness where a thin film catalyst is used. This simplifies the characterisation of CNTs by electron microscopy. We also find a linear relationship between nanotube diameter and initial catalyst film thickness. © 2013 AIP Publishing LLC.