MCDA applied to performance appraisal of short-haul truck drivers: a case study in a portuguese trucking company

Performance appraisal increasingly assumes a more important role in any organizational environment. In the trucking industry, drivers are the company's image and for this reason it is important to develop and increase their performance and commitment to the company's goals. This paper aims to create a performance appraisal model for trucking drivers, based on a multi-criteria decision aid methodology. The PROMETHEE and MMASSI methodologies were adapted using the criteria used for performance appraisal by the trucking company studied. The appraisal involved all the truck drivers, their supervisors and the company's Managing Director. The final output is a ranking of the drivers, based on their performance, for each one of the scenarios used. The results are to be used as a decision-making tool to allocate drivers to the domestic haul service.

The influence of low-frequency noise pollution on the quality of life and place in sustainable cities: a case study from northern Portugal

Discussing urban planning requires rethinking sustainability in cities and building healthy environments. Historically, some aspects of advancing the urban way of life have not been considered important in city planning. This is particularly the case where technological advances have led to conflicting land use, as with the installation of power poles and building electrical substations near residential areas. This research aims to discuss and rethink sustainability in cities, focusing on the environmental impact of low-frequency noise and electromagnetic radiation on human health. It presents data from a case study in an urban space in northern Portugal, and focuses on four guiding questions: Can power poles and power lines cause noise? Do power poles and power lines cause discomfort? Do power poles and power lines cause discomfort due to noise? Can power poles and power lines affect human health? To answer these questions, we undertook research between 2014 and 2015 that was comprised of two approaches. The first approach consisted of evaluating the noise of nine points divided into two groups â near the sourceâ (e.g., up to 50 m from power poles) and â away from the sourceâ (e.g., more than 250 m away from the source). In the second approach, noise levels were measured for 72 h in houses located up to 20 m from the source. The groups consist of residents living within the distance range specified for each group. The measurement values were compared with the proposed criteria for assessing low-frequency noise using the DEFRA Guidance (University of Salford). In the first approach, the noise caused discomfort, regardless of the group. In the second approach, the noise had fluctuating characteristics, which led us to conclude that the noise caused discomfort.

Sustainability education in PBL education: the case study of IEM-UMINHO

Sustainability-related skills are becoming more and more relevant for a proficient and professional engineering practice. Industrial engineers in particular, given their broad field of intervention and being at the heart of industrial activity, hold a great deal of potential and responsibility in providing and delivering best industrial practices, that support enhanced industrial systems and products. Therefore making a real contribution in generating wealth and income for all the companies’ stakeholders, including local communities, as well as adding up to more sustainable ecosystems. Previous work by the authors focused on studying the inclusion of this subject on the education of industrial engineers, especially through active-learning methodologies, as well as presenting results on the use of one such approach. The study conducted tried to identify the impacts on sustainability learning using a given specific activity, i.e. a workshop on industrial ecology, held in the 2014/2015 academic year on the Integrated MSc degree on Industrial Engineering and Management at the University of Minho, Portugal. The study uses content analysis of student teams’ reports for two consecutive academic years. The former did not include one such workshop, while the latter did. The Fink taxonomy was used in the discussion of results and reflection. The study outcomes aimed at supporting decision making on worthiness of investment on similar education instruments for sustainability competency development. Some results of the study highlight that: (1) the workshop seem to globally have a positive contribution on the sustainability learning; (2) a number of dimensions of the Life cycle design strategy wheel was developed, but the approach was not broadly used, (3) There was a mismatch on the workshop schedule; (4) students enjoy the workshop; (5) a clearer endorsement on relevance of this aspect is required. Suggestions for future work are also issued.

An Archival Case Study: Revisiting The Life and Political Economy of Lauchlin Currie

This paper forms part of a wider project to show the significance of archival material on distinguished economists, in this case Lauchlin Currie (1902-93), who studied and taught at Harvard before entering government service at the US Treasury and Federal Reserve Board as the intellectual leader of Roosevelt’s New Deal, 1934-39, as FDR’s White House economic adviser in peace and war, 1939-45, and as a post-war development economist. It discusses the uses made of the written and oral material available when the author was writing his intellectual biography of Currie (Duke University Press 1990) while Currie was still alive, and the significance of the material that has come to light after Currie’s death.

Use of Two-Part Regression Calibration Model to Correct for Measurement Error in Episodically Consumed Foods in a Single-Replicate Study Design: EPIC Case Study.

In epidemiologic studies, measurement error in dietary variables often attenuates association between dietary intake and disease occurrence. To adjust for the attenuation caused by error in dietary intake, regression calibration is commonly used. To apply regression calibration, unbiased reference measurements are required. Short-term reference measurements for foods that are not consumed daily contain excess zeroes that pose challenges in the calibration model. We adapted two-part regression calibration model, initially developed for multiple replicates of reference measurements per individual to a single-replicate setting. We showed how to handle excess zero reference measurements by two-step modeling approach, how to explore heteroscedasticity in the consumed amount with variance-mean graph, how to explore nonlinearity with the generalized additive modeling (GAM) and the empirical logit approaches, and how to select covariates in the calibration model. The performance of two-part calibration model was compared with the one-part counterpart. We used vegetable intake and mortality data from European Prospective Investigation on Cancer and Nutrition (EPIC) study. In the EPIC, reference measurements were taken with 24-hour recalls. For each of the three vegetable subgroups assessed separately, correcting for error with an appropriately specified two-part calibration model resulted in about three fold increase in the strength of association with all-cause mortality, as measured by the log hazard ratio. Further found is that the standard way of including covariates in the calibration model can lead to over fitting the two-part calibration model. Moreover, the extent of adjusting for error is influenced by the number and forms of covariates in the calibration model. For episodically consumed foods, we advise researchers to pay special attention to response distribution, nonlinearity, and covariate inclusion in specifying the calibration model.

A Case Study of China’s Commercial Pork Value Chain, August 2005

In China, with the cost of improved technology rising, surplus labor shrinking, and demand for food quality and safety increasing, it will be just a matter of time before the country’s hog production sector will be commercialized like that of developed countries. However, even if China’s cost of production converges to international levels, as shown in this case study, China may continue to retain some competitive advantage because of the labor-intensive nature of the marketing services involved in hog processing and meat distribution. The supply of variety meats offers the most promising market opportunity for foreign suppliers in China. The market may open further if the tariff rate for variety meats is reduced from 20% and harmonized with the pork muscle meat rate of 12%, and if the value-added tax of 13% is applied equally to both imported and domestic products. The fast-growing Western-style family restaurant and higher-end dining sector is another market opportunity for high-quality imported pork.

Cumulative Vulnerability: A Case Study on intrafamilial violence, Drug Addiction and Adolescent Pregnancy

A pregnant adolescent’s vulnerability increases when she is a victim of intrafamilial violence and drug addiction, which cause physical and biopsychosocial damage to the mother and her baby. Objective Present and analyze the case of an adolescent who is addicted to drugs, pregnant and the victim of lifelong intrafamilial violence. Method A case study based on a semi-structured interview conducted in the Obstetrics Emergency Unit at the Teaching Hospital of the University of São Paulo. The data were interpreted and analyzed using Content Analysis. Results intrafamilial violence experienced at the beginning of the adolescent’s early relationships seriously affected her emotional maturity, triggering the development of psychopathologies and leaving her more susceptible to the use and abuse of alcohol and other drugs. The adolescent is repeating her history with her daughter, reproducing the cycle of violence. Conclusion Adolescent pregnancy combined with intrafamilial violence and drug addiction and multiplies the adolescent’s psychosocial vulnerability increased the adolescent’s vulnerability.

Crash Data Validation: An Iowa Case Study, February, 2007

With the quickening pace of crash reporting, the statistical editing of data on a weekly basis, and the ability to provide working databases to users at CTRE/Iowa Traffic Safety Data Service, the University of Iowa, and the Iowa DOT, databases that would be considered incomplete by past standards of static data files are in “public use” even as the dynamic nature of the central DOT database allows changes to be made to both the aggregate of data and to the individual crashes already reported. Moreover, “definitive” analyses of serious crashes will, by their nature, lag seriously behind the preliminary data files. Even after these analyses, the dynamic nature of the mainframe data file means that crash numbers can continue to change long after the incident year. The Iowa DOT, its Office of Driver Services (the “data owner”), and institutional data users/distributors must establish data use, distribution, and labeling protocols to deal with the new, dynamic nature of data. In order to set these protocols, data must be collected concerning the magnitude of difference between database records and crash narratives and diagrams. This study determines the difference between database records and crash narratives for the Iowa Department of Transportation’s Office of Traffic and Safety crash database and the impacts of this difference.

Rockfall induced seismic signals: case study in Montserrat, Catalonia

After a rockfall event, a usual post event survey includes qualitative volume estimation, trajectory mapping and determination of departing zones. However, quantitative measurements are not usually made. Additional relevant quantitative information could be useful in determining the spatial occurrence of rockfall events and help us in quantifying their size. Seismic measurements could be suitable for detection purposes since they are non invasive methods and are relatively inexpensive. Moreover, seismic techniques could provide important information on rockfall size and location of impacts. On 14 February 2007 the Avalanche Group of the University of Barcelona obtained the seismic data generated by an artificially triggered rockfall event at the Montserrat massif (near Barcelona, Spain) carried out in order to purge a slope. Two 3 component seismic stations were deployed in the area about 200 m from the explosion point that triggered the rockfall. Seismic signals and video images were simultaneously obtained. The initial volume of the rockfall was estimated to be 75 m3 by laser scanner data analysis. After the explosion, dozens of boulders ranging from 10¿4 to 5 m3 in volume impacted on the ground at different locations. The blocks fell down onto a terrace, 120 m below the release zone. The impact generated a small continuous mass movement composed of a mixture of rocks, sand and dust that ran down the slope and impacted on the road 60 m below. Time, time-frequency evolution and particle motion analysis of the seismic records and seismic energy estimation were performed. The results are as follows: 1 ¿ A rockfall event generates seismic signals with specific characteristics in the time domain; 2 ¿ the seismic signals generated by the mass movement show a time-frequency evolution different from that of other seismogenic sources (e.g. earthquakes, explosions or a single rock impact). This feature could be used for detection purposes; 3 ¿ particle motion plot analysis shows that the procedure to locate the rock impact using two stations is feasible; 4 ¿ The feasibility and validity of seismic methods for the detection of rockfall events, their localization and size determination are comfirmed.

The emergence of forensic nursing and advanced nursing practice in Switzerland: an innovative case study consultation.

BACKGROUND AND METHODS: The objectives of this article were to systematically describe and examine the novel roles and responsibilities assumed by nurses in a forensic consultation for victims of violence at a University Hospital in French-speaking Switzerland. Utilizing a case study methodology, information was collected from two main sources: (a) discussion groups with nurses and forensic pathologists and (b) a review of procedures and protocols. Following a critical content analysis, the roles and responsibilities of the forensic nurses were described and compared with the seven core competencies of advanced nursing practice as outlined by Hamric, Spross, and Hanson (2009). RESULTS: Advanced nursing practice competencies noted in the analysis included "direct clinical practice," "coaching and guidance," and "collaboration." The role of the nurse in terms of "consultation," "leadership," "ethics," and "research" was less evident in the analysis. DISCUSSION AND CONCLUSION: New forms of nursing are indeed practiced in the forensic clinical setting, and our findings suggest that nursing practice in this domain is following the footprints of an advanced nursing practice model. Further reflections are required to determine whether the role of the forensic nurse in Switzerland should be developed as a clinical nurse specialist or that of a nurse practitioner.

The Emergence of Forensic Nursing and Advanced Nursing Practice in Switzerland: An Innovative Case Study Consultation.

BACKGROUND AND METHODS:: The objectives of this article were to systematically describe and examine the novel roles and responsibilities assumed by nurses in a forensic consultation for victims of violence at a University Hospital in French-speaking Switzerland. Utilizing a case study methodology, information was collected from two main sources: (a) discussion groups with nurses and forensic pathologists and (b) a review of procedures and protocols. Following a critical content analysis, the roles and responsibilities of the forensic nurses were described and compared with the seven core competencies of advanced nursing practice as outlined by Hamric, Spross, and Hanson (2009). RESULTS:: Advanced nursing practice competencies noted in the analysis included "direct clinical practice," "coaching and guidance," and "collaboration." The role of the nurse in terms of "consultation," "leadership," "ethics," and "research" was less evident in the analysis. DISCUSSION AND CONCLUSION:: New forms of nursing are indeed practiced in the forensic clinical setting, and our findings suggest that nursing practice in this domain is following the footprints of an advanced nursing practice model. Further reflections are required to determine whether the role of the forensic nurse in Switzerland should be developed as a clinical nurse specialist or that of a nurse practitioner.

On the innovation capacity of technologyrelated knowledge-intensive business services. A case study of the technology and engineering consulting (TEC) sector in Singapore

Even though the research on innovation in services has expanded remarkably especially during the past two decades, there is still a need to increase understanding on the special characteristics of service innovation. In addition to studying innovation in service companies and industries, research has also recently focused more on services in innovation, as especially the significance of so-called knowledge intensive business services (KIBS) for the competitive edge of their clients, othercompanies, regions and even nations has been proved in several previous studies. This study focuses on studying technology-based KIBS firms, and technology andengineering consulting (TEC) sector in particular. These firms have multiple roles in innovation systems, and thus, there is also a need for in-depth studies that increase knowledge about the types and dimensions of service innovations as well as underlying mechanisms and procedures which make the innovations successful. The main aim of this study is to generate new knowledge in the fragmented research field of service innovation management by recognizing the different typesof innovations in TEC services and some of the enablers of and barriers to innovation capacity in the field, especially from the knowledge management perspective. The study also aims to shed light on some of the existing routines and new constructions needed for enhancing service innovation and knowledge processing activities in KIBS companies of the TEC sector. The main samples of data in this research include literature reviews and public data sources, and a qualitative research approach with exploratory case studies conducted with the help of the interviews at technology consulting companies in Singapore in 2006. These complement the qualitative interview data gathered previously in Finland during a larger research project in the years 2004-2005. The data is also supplemented by a survey conducted in Singapore. The respondents for the survey by Tan (2007) were technology consulting companies who operate in the Singapore region. The purpose ofthe quantitative part of the study was to validate and further examine specificaspects such as the influence of knowledge management activities on innovativeness and different types of service innovations, in which the technology consultancies are involved. Singapore is known as a South-east Asian knowledge hub and is thus a significant research area where several multinational knowledge-intensive service firms operate. Typically, the service innovations identified in the studied TEC firms were formed by several dimensions of innovations. In addition to technological aspects, innovations were, for instance, related to new client interfaces and service delivery processes. The main enablers of and barriers to innovation seem to be partly similar in Singaporean firms as compared to the earlier study of Finnish TEC firms. Empirical studies also brought forth the significance of various sources of knowledge and knowledge processing activities as themain driving forces of service innovation in technology-related KIBS firms. A framework was also developed to study the effect of knowledge processing capabilities as well as some moderators on the innovativeness of TEC firms. Especially efficient knowledge acquisition and environmental dynamism seem to influence the innovativeness of TEC firms positively. The results of the study also contributeto the present service innovation literature by focusing more on 'innovation within KIBs' rather than 'innovation through KIBS', which has been the typical viewpoint stressed in the previous literature. Additionally, the study provides several possibilities for further research.

Interdependency management in universities: a case study

There remains uncertainty in scientific discussions regarding the governance of universities in new public management regimes in terms of who actually 'rules' in the university. Apparently, a strengthened management leadership is confronted with continuing elements of academic self-regulation and professional autonomy in knowledge production and diffusion. Organisational and academic rationales coexist in today's management of universities. This article endeavours to clarify some of the ambiguities pertaining to the coexistence of two authorities by demonstrating the working of 'interdependency management' that is taking place within universities. For this purpose, the authors have scrutinised research, teaching and recruitment policies in one Swiss university that is subject to such ambiguities. The study confirms existing research in that a command-and-control system is not applied. Policymaking in universities is instead based on a mix of negotiations in faculties that are taking place in the 'shadow of hierarchy', negotiated bargaining between faculties and leaders and occasional unilateral decisions of leaders. This mitigates latent conflicts between management and the academic community: strategic orientations of the university are generally accepted by the academic community while the academic community has influence on policy formulation and maintains defining powers over policy substance.