The information capacity of hypercycles

Hypercycles are information integration systems which are thought to overcome the information crisis of prebiotic evolution by ensuring the coexistence of several short templates. For imperfect template replication, we derive a simple expression for the maximum number of distinct templates n(m). that can coexist in a hypercycle and show that it is a decreasing function of the length L of the templates. In the case of high replication accuracy we find that the product n(m)L tends to a constant value, limiting thus the information content of the hypercycle. Template coexistence is achieved either as a stationary equilibrium (stable fixed point) or a stable periodic orbit in which the total concentration of functional templates is nonzero. For the hypercycle system studied here we find numerical evidence that the existence of an unstable fixed point is a necessary condition for the presence of periodic orbits. (C) 2008 Elsevier Ltd. All rights reserved.

Experimental and theoretical study of workpiece temperature when end milling hardened steels using (TiAl)N-coated and PcBN-tipped tools

The present work shows an experimental and theoretical study on heat flow when end milling, at high-speed, hardened steels applied to moulds and dies. AISI H13 and AISI D2 steels were machined with two types of ball nose end mills: coated with (TiAl)N and tipped with PcBN. The workpiece geometry was designed to simulate tool-workpiece interaction in real situations found in mould industries, in which complex surfaces and thin walls are commonly machined. The compressed and cold air cooling systems were compared to dry machining Results indicated a relatively small temperature variation, with higher range when machining AISI D2 with PcBN-tipped end mill. All cooling systems used demonstrated good capacity to remove heat from the machined surface, especially the cold air. Compressed air was the most indicated to keep workpiece at relatively stable temperature. A theoretical model was also proposed to estimate the energy transferred to the workpiece (Q) and the average convection coefficient ((h) over bar) for the cooling systems used. The model used a FEM simulation and a steepest decent method to find the best values for both variables. (c) 2007 Elsevier B.V. All rights reserved.

Design of a Comb Generator for High Capacity Coherent-WDM Systems

This paper presents a theoretical model developed for estimating the power, the optical signal to noise ratio and the number of generated carriers in a comb generator, having as a reference the minimum optical signal do noise ratio at the receiver input, for a given fiber link. Based on the recirculating frequency shifting technique, the generator relies on the use of coherent and orthogonal multi-carriers (Coherent-WDM) that makes use of a single laser source (seed) for feeding high capacity (above 100 Gb/s) systems. The theoretical model has been validated by an experimental demonstration, where 23 comb lines with an optical signal to noise ratio ranging from 25 to 33 dB, in a spectral window of similar to 3.5 nm, are obtained.

Theoretical Models Based on a Flowchart Approach to Industrial Cluster Policy

This article examined the issue of whether or not the currency exchange rate, country risk, and cooperate tax rate affect decisions of multinational firms to invest in industrial clusters. First, if the exchange rate between a multinational company in an industry of diminishing returns to scale and a developing country is appreciated, then production in the developing country should increase. Second, if the investment period becomes longer, the currency exchange rate of a multinational company's country should be revalued more in order for it to further invest in the developing country. Third, if the investment period becomes longer, the developing country's risk should become less. Fourth, compensation for the developing country's high risk can be made by lowering its corporate tax rate.

Use of Headed Reinforcement Bars in Contruction. A Theoretical Approach to Determine the Dimensions of Anchorage Plates and Experimental Tests on Knee Joints Subjected to a Closing Moment

In order to reduce costs and time while improving quality, durability and sustainability in structural concrete constructions, a widely used material nowadays, special care must be taken in some crucial phases of the project and execution, including the structure design and calculation, the dosage, dumping and curing of concrete: another important aspect is the proper design and execution of assembly plans and construction details. The framework, a name designating the whole reinforcement bars cage already assembled as shown in the drawings, can be made up of several components and implies higher or lower industrialization degree. The framework costs constitute about one third of the price per cubic meter placed in concrete works. The best solutions from all points of view are clearly those involving an easier processing to achieve the same goal, and consequently carrying a high degree of industrialization, meaning quality and safety in the work. This thesis aims to provide an indepth analysis of a relatively new type of anchoring by plate known as headed reinforcement bars, which can potentially replace standard or L-shaped hooks, improving the cleaning of construction details and enabling a faster, more flexible, and therefore a more economical assembly. A literature review on the topic and an overview of typical applications is provided, followed by some examples of specific applications in real projects. Since a strict theoretical formulation used to provide the design plate dimensions has not yet been put forward, an equation is proposed for the side-face blowout strength of the anchorage, based on the capacity of concrete to carry concentrated loads in cases in which no transverse reinforcement is provided. The correlation of the calculated ultimate load with experimental results available in the literature is given. Besides, the proposed formulation can be expanded to cases in which a certain development length is available: using a software for nonlinear finite element analysis oriented to the study of reinforced concrete, numerical tests on the bond-bearing interaction are performed. The thesis ends with a testing of eight corner joints subjected to a closing moment, held in the Structures Laboratory of the Polytechnic University of Madrid, aiming to check whether the design of such plates as stated is adequate for these elements and whether an element with plate-anchored reinforcement is equivalent to one with a traditional construction detail.

Shannon capacity of nonlinear communication channels

The exponentially increasing demand on operational data rate has been met with technological advances in telecommunication systems such as advanced multilevel and multidimensional modulation formats, fast signal processing, and research into new different media for signal transmission. Since the current communication channels are essentially nonlinear, estimation of the Shannon capacity for modern nonlinear communication channels is required. This PhD research project has targeted the study of the capacity limits of different nonlinear communication channels with a view to enable a significant enhancement in the data rate of the currently deployed fiber networks. In the current study, a theoretical framework for calculating the Shannon capacity of nonlinear regenerative channels has been developed and illustrated on the example of the proposed here regenerative Fourier transform (RFT). Moreover, the maximum gain in Shannon capacity due to regeneration (that is, the Shannon capacity of a system with ideal regenerators – the upper bound on capacity for all regenerative schemes) is calculated analytically. Thus, we derived a regenerative limit to which the capacity of any regenerative system can be compared, as analogue of the seminal linear Shannon limit. A general optimization scheme (regenerative mapping) has been introduced and demonstrated on systems with different regenerative elements: phase sensitive amplifiers and the proposed here multilevel regenerative schemes: the regenerative Fourier transform and the coupled nonlinear loop mirror.

Storage capacity of ultrametric committee machines

The problem of computing the storage capacity of a feed-forward network, with L hidden layers, N inputs, and K units in the first hidden layer, is analyzed using techniques from statistical mechanics. We found that the storage capacity strongly depends on the network architecture αc ∼ (log K)1-1/2L and that the number of units K limits the number of possible hidden layers L through the relationship 2L - 1 < 2log K. © 2014 IOP Publishing Ltd.

Increasing the electrolyte capacity of alkaline Zn-air fuel cells by scavenging zincate with Ca(OH)2

The use of calcium hydroxide for scavenging zincate species is demonstrated to be a highly effective approach for increasing the electrolyte capacity and improving the performance of the zinc-air fuel cell system. A fundamental approach is established in this study to quantify the formation of calcium zincate as the product of scavenging and the amount of water compensation necessary for optimal performance. The good agreement between predicted and experimental results proves the validity of the proposed theoretical approach. By applying the results of theoretical predictions, both the electrolyte capacity and the cell longevity have been increased by more than 40%. It is also found that, using Ca(OH)2 to scavenge zincate species in concentrated KOH solutions, affects mostly the removal of zincate, rather than ZnO, from the electrolyte, whereas the presence of excess, free, mobile H2O plays a key role in dissolving ZnO and forming zincate. The results obtained in this study demonstrate that the proposed approach can widely and effectively be applied to all zinc-air cell systems during their discharge cycle.

Deliberate and spontaneous sensations of disembodiment:capacity or flaw?

Introduction: Hallucinations that involve shifts in the subjectively experienced location of the self, have been termed “out-of-body experiences” (OBEs). Early psychiatric accounts cast OBEs as a specific instance of depersonalisation and derealisation disorder (DPD-DR). However, during feelings of alienation and lack of body realism in DPD-DR the self is experienced within the physical body. Deliberate forms of “disembodiment” enable humans to imagine another’s visuo-spatial perspective taking (VPT), thus, if a strong relationship between deliberate and spontaneous forms of disembodiment could be revealed, then uncontrolled OBEs could be “the other side of the coin” of a uniquely human capacity. Methods: We present a narrative review of behavioural and neuroimaging work emphasising methodological and theoretical aspects of OBE and VPT research and a potential relationship. Results: Results regarding a direct behavioural relationship between VPT and OBE are mixed and we discuss reasons by pointing out the importance of using realistic tasks and recruiting genuine OBEers instead of general DPD-DR patients. Furthermore, we review neuroimaging evidence showing overlapping neural substrates between VPT and OBE, providing a strong argument for a relationship between the two processes. Conclusions: We conclude that OBE should be regarded as a necessary implication of VPT ability in humans, or even as a necessary and potentially sufficient condition for the evolution of VPT.

What Determines the Innovativeness of Polish Family Firms? Empirical Results and Theoretical Puzzles

This article will review and synthesize the existing research on the innovativeness of Polish family firms in order to separate universal factors that influence the degree of innovativeness of firms from the factors which distinctively influence the innovativeness of family firms. To better assess the innovation propensity of family firms the author will work out the typology by combining the variety of innovations with particular features of family firms and the industrial context. A more nuanced approach will help to understand why the academic literature is inconclusive with regards to the question of whether family firms are anti-innovative (as some authors claim), pro-innovative or ambivalent with regard to innovations. In particular it will be argued that when assessing family firms’ innovativeness special attention needs to be paid to the impact of the management of intergenerational change on the propensity to innovate, as this process relates to the capacity for investments into innovativeness and the time horizon of the owner’s decisions.