Processing Argo oxygen data at the DAC level cookbook

This document does NOT address the issue of oxygen data quality control (either real-time or delayed mode). As a preliminary step towards that goal, this document seeks to ensure that all countries deploying floats equipped with oxygen sensors document the data and metadata related to these floats properly. We produced this document in response to action item 14 from the AST-10 meeting in Hangzhou (March 22-23, 2009). Action item 14: Denis Gilbert to work with Taiyo Kobayashi and Virginie Thierry to ensure DACs are processing oxygen data according to recommendations. If the recommendations contained herein are followed, we will end up with a more uniform set of oxygen data within the Argo data system, allowing users to begin analysing not only their own oxygen data, but also those of others, in the true spirit of Argo data sharing. Indications provided in this document are valid as of the date of writing this document. It is very likely that changes in sensors, calibrations and conversions equations will occur in the future. Please contact V. Thierry (vthierry@ifremer.fr) for any inconsistencies or missing information. A dedicated webpage on the Argo Data Management website (www) contains all information regarding Argo oxygen data management : current and previous version of this cookbook, oxygen sensor manuals, calibration sheet examples, examples of matlab code to process oxygen data, test data, etc..

THERMAL VACUUM TEST CORRELATION OF A ZERO PROPELLANT LOAD CASE THERMAL CAPACITANCE PROPELLANT GAUGING ANALYTICAL MODEL

This thesis describes the development and correlation of a thermal model that forms the foundation of a thermal capacitance spacecraft propellant load estimator. Specific details of creating the thermal model for the diaphragm propellant tank used on NASA’s Magnetospheric Multiscale spacecraft using ANSYS and the correlation process implemented are presented. The thermal model was correlated to within +/- 3 Celsius of the thermal vacuum test data, and was determined sufficient to make future propellant predictions on MMS. The model was also found to be relatively sensitive to uncertainties in applied heat flux and mass knowledge of the tank. More work is needed to improve temperature predictions in the upper hemisphere of the propellant tank where predictions were found to be 2-2.5 Celsius lower than the test data. A road map for applying the model to predict propellant loads on the actual MMS spacecraft in 2017-2018 is also presented.

Uma abordagem dirigida a modelo para a geração de casos de teste baseada na detecção de cenários implícitos

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Exatas, Departamento de Ciência da Computação, 2015.

A medida e as escalas de avaliação da saúde das populações neonatais e pediátricas : estudo de simulação de Monte Carlo com variáveis ordinais

A investigação na área da saúde e a utilização dos seus resultados tem funcionado como base para a melhoria da qualidade de cuidados, exigindo dos profissionais de saúde conhecimentos na área específica onde desempenham funções, conhecimentos em metodologia de investigação que incluam as técnicas de observação, técnicas de recolha e análise de dados, para mais facilmente serem leitores capacitados dos resultados da investigação. Os profissionais de saúde são observadores privilegiados das respostas humanas à saúde e à doença, podendo contribuir para o desenvolvimento e bem-estar dos indivíduos muitas vezes em situações de grande vulnerabilidade. Em saúde infantil e pediatria o enfoque está nos cuidados centrados na família privilegiando-se o desenvolvimento harmonioso da criança e jovem, valorizando os resultados mensuráveis em saúde que permitam determinar a eficácia das intervenções e a qualidade de saúde e de vida. No contexto pediátrico realçamos as práticas baseadas na evidência, a importância atribuída à pesquisa e à aplicação dos resultados da investigação nas práticas clínicas, assim como o desenvolvimento de instrumentos de mensuração padronizados, nomeadamente as escalas de avaliação, de ampla utilização clínica, que facilitam a apreciação e avaliação do desenvolvimento e da saúde das crianças e jovens e resultem em ganhos em saúde. A observação de forma sistematizada das populações neonatais e pediátricas com escalas de avaliação tem vindo a aumentar, o que tem permitido um maior equilíbrio na avaliação das crianças e também uma observação baseada na teoria e nos resultados da investigação. Alguns destes aspetos serviram de base ao desenvolvimento deste trabalho que pretende dar resposta a 3 objetivos fundamentais. Para dar resposta ao primeiro objetivo, “Identificar na literatura científica, os testes estatísticos mais frequentemente utilizados pelos investigadores da área da saúde infantil e pediatria quando usam escalas de avaliação” foi feita uma revisão sistemática da literatura, que tinha como objetivo analisar artigos científicos cujos instrumentos de recolha de dados fossem escalas de avaliação, na área da saúde da criança e jovem, desenvolvidas com variáveis ordinais, e identificar os testes estatísticos aplicados com estas variáveis. A análise exploratória dos artigos permitiu-nos verificar que os investigadores utilizam diferentes instrumentos com diferentes formatos de medida ordinal (com 3, 4, 5, 7, 10 pontos) e tanto aplicam testes paramétricos como não paramétricos, ou os dois em simultâneo, com este tipo de variáveis, seja qual for a dimensão da amostra. A descrição da metodologia nem sempre explicita se são cumpridas as assunções dos testes. Os artigos consultados nem sempre fazem referência à distribuição de frequência das variáveis (simetria/assimetria) nem à magnitude das correlações entre os itens. A leitura desta bibliografia serviu de suporte à elaboração de dois artigos, um de revisão sistemática da literatura e outro de reflexão teórica. Apesar de terem sido encontradas algumas respostas às dúvidas com que os investigadores e os profissionais, que trabalham com estes instrumentos, se deparam, verifica-se a necessidade de desenvolver estudos de simulação que confirmem algumas situações reais e alguma teoria já existente, e trabalhem outros aspetos nos quais se possam enquadrar os cenários reais de forma a facilitar a tomada de decisão dos investigadores e clínicos que utilizam escalas de avaliação. Para dar resposta ao segundo objetivo “Comparar a performance, em termos de potência e probabilidade de erro de tipo I, das 4 estatísticas da MANOVA paramétrica com 2 estatísticas da MANOVA não paramétrica quando se utilizam variáveis ordinais correlacionadas, geradas aleatoriamente”, desenvolvemos um estudo de simulação, através do Método de Monte Carlo, efetuado no Software R. O delineamento do estudo de simulação incluiu um vetor com 3 variáveis dependentes, uma variável independente (fator com três grupos), escalas de avaliação com um formato de medida com 3, 4, 5, e 7 pontos, diferentes probabilidades marginais (p1 para distribuição simétrica, p2 para distribuição assimétrica positiva, p3 para distribuição assimétrica negativa e p4 para distribuição uniforme) em cada um dos três grupos, correlações de baixa, média e elevada magnitude (r=0.10, r=0.40, r=0.70, respetivamente), e seis dimensões de amostras (n=30, 60, 90, 120, 240, 300). A análise dos resultados permitiu dizer que a maior raiz de Roy foi a estatística que apresentou estimativas de probabilidade de erro de tipo I e de potência de teste mais elevadas. A potência dos testes apresenta comportamentos diferentes, dependendo da distribuição de frequência da resposta aos itens, da magnitude das correlações entre itens, da dimensão da amostra e do formato de medida da escala. Tendo por base a distribuição de frequência, considerámos três situações distintas: a primeira (com probabilidades marginais p1,p1,p4 e p4,p4,p1) em que as estimativas da potência eram muito baixas, nos diferentes cenários; a segunda situação (com probabilidades marginais p2,p3,p4; p1,p2,p3 e p2,p2,p3) em que a magnitude das potências é elevada, nas amostras com dimensão superior ou igual a 60 observações e nas escalas com 3, 4,5 pontos e potências de magnitude menos elevada nas escalas com 7 pontos, mas com a mesma ma magnitude nas amostras com dimensão igual a 120 observações, seja qual for o cenário; a terceira situação (com probabilidades marginais p1,p1,p2; p1,p2,p4; p2,p2,p1; p4,p4,p2 e p2,p2,p4) em que quanto maiores, a intensidade das correlações entre itens e o número de pontos da escala, e menor a dimensão das amostras, menor a potência dos testes, sendo o lambda de Wilks aplicado às ordens mais potente do que todas as outra s estatísticas da MANOVA, com valores imediatamente a seguir à maior raiz de Roy. No entanto, a magnitude das potências dos testes paramétricos e não paramétricos assemelha-se nas amostras com dimensão superior a 90 observações (com correlações de baixa e média magnitude), entre as variáveis dependentes nas escalas com 3, 4 e 5 pontos; e superiores a 240 observações, para correlações de baixa intensidade, nas escalas com 7 pontos. No estudo de simulação e tendo por base a distribuição de frequência, concluímos que na primeira situação de simulação e para os diferentes cenários, as potências são de baixa magnitude devido ao facto de a MANOVA não detetar diferenças entre grupos pela sua similaridade. Na segunda situação de simulação e para os diferentes cenários, a magnitude das potências é elevada em todos os cenários cuja dimensão da amostra seja superior a 60 observações, pelo que é possível aplicar testes paramétricos. Na terceira situação de simulação, e para os diferentes cenários quanto menor a dimensão da amostra e mais elevada a intensidade das correlações e o número de pontos da escala, menor a potência dos testes, sendo a magnitude das potências mais elevadas no teste de Wilks aplicado às ordens, seguido do traço de Pillai aplicado às ordens. No entanto, a magnitude das potências dos testes paramétricos e não paramétricos assemelha-se nas amostras com maior dimensão e correlações de baixa e média magnitude. Para dar resposta ao terceiro objetivo “Enquadrar os resultados da aplicação da MANOVA paramétrica e da MANOVA não paramétrica a dados reais provenientes de escalas de avaliação com um formato de medida com 3, 4, 5 e 7 pontos, nos resultados do estudo de simulação estatística” utilizaram-se dados reais que emergiram da observação de recém-nascidos com a escala de avaliação das competências para a alimentação oral, Early Feeding Skills (EFS), o risco de lesões da pele, com a Neonatal Skin Risk Assessment Scale (NSRAS), e a avaliação da independência funcional em crianças e jovens com espinha bífida, com a Functional Independence Measure (FIM). Para fazer a análise destas escalas foram realizadas 4 aplicações práticas que se enquadrassem nos cenários do estudo de simulação. A idade, o peso, e o nível de lesão medular foram as variáveis independentes escolhidas para selecionar os grupos, sendo os recém-nascidos agrupados por “classes de idade gestacional” e por “classes de peso” as crianças e jovens com espinha bífida por “classes etárias” e “níveis de lesão medular”. Verificou-se um bom enquadramento dos resultados com dados reais no estudo de simulação.

Fighting child marriage in developing countries: design and development of a mobile application

Child marriage is still a great issue in developing countries and even if the interventions to prevent it are having results, they are not enough to eliminate the problem. Among the strategies that seem to work most to fight child marriage, there is the empowerment of girls with information combined with education of parents and community. As smartphones are more accessible year after year in developing countries, this thesis wants to investigate if a mobile app could be effective in fighting child marriage and which characteristics such an app should have. The research was organized in four phases and used design and creation and case study methodologies. Firstly, the literature was analyzed and an initial design was proposed. Secondly, expert interviews were performed to gain feedback on the proposed design, and afterwards prototype was built. Thirdly, a case study in the Democratic Republic of Congo (DRC) was performed to test the prototype, gaining insights and improvements through group interviews with 26 girls aged 15-19. Finally, a first version of the app was developed and a second phase of the case study was run in the DRC to understand if the girls were able to use the app. This phase included 14 girls of which 6 had participated in the prototype testing and used questionnaires as a data generation method. The app was built following the Principles for Digital Development. Even if this app is built based on the case study in DRC is modular and easily adaptable to other contexts as it is not content-specific. It was shown that is worth continuing to study this topic and it was defined a conceptual framework for designing learning apps for developing countries, in particular, to fight child, early, and forced marriage.

Adhesion of Epiphany and AH Plus sealers to human root dentin treated with different solutions

This study evaluated comparatively the adhesion of Epiphany and AH Plus endodontic sealers to human root dentin treated with 1% NaOCl and 1% NaOCl+17% EDTA, using the push-out test. Sixty root cylinders obtained from maxillary canines had the canals prepared and were randomly assigned to 3 groups (n=20), according to root dentin treatment: GI - distilled water (control), GII - 1% NaOCl and GIII - 1% NaOCl+17% EDTA. Each group was divided into 2 subgroups (n=10) filled with either Epiphany or AH Plus. Bond strength push-out test data (kN) were obtained and analyzed statistically by ANOVA and Tukey's post-hoc test. There was statistically significant difference between sealers (AH Plus: 0.78 ± 0.13; Epiphany: 0.61 ± 0.19; p<0.01) and among root dentin treatments (distilled water: 0.58 ± 0.19; 1% NaOCl: 0.71 ± 0.12; 1% NaOCl+17% EDTA: 0.80 ± 0.17; p<0.05). In conclusion, AH Plus sealer presented greater adhesion to dentin than Epiphany, regardless of the treatment of root canal walls.

Prevalence of diabetes mellitus and impaired glucose tolerance in a rural community of Angola

Background: To determine the prevalence of diabetes mellitus (DM) and impaired glucose tolerance (IGT) in a rural community (Bengo) of Angola. Methods: A random sample of 421 subjects aged 30 to 69 years (30% men and 70% women) was selected from three villages of Bengo province. This cross-sectional home survey was conducted using a sampling design of stage conglomerates. First, clinical and anthropometric data were obtained and fasting capillary glucose level was determined. Subjects who screened positive (fasting capillary glucose >= 100 mg/dl and < 200 mg/dl) and each sixth consecutive subject who screened negative (fasting capillary glucose < 100 mg/dl) were submitted to the second phase of survey, consisting of the 75 g oral glucose tolerance test. Data was analyzed by the use of SAS statistical software. Results: The prevalence rates of diabetes mellitus and IGT were 2.8% and 8.1%, respectively. The age group with the highest prevalence of diabetes was 60 to 69 years (42%). Impaired glucose tolerance prevalence was 38% in the 40 to 49 year age group and it increased with age, considering that the 50 to 59 and 60 to 69 year age groups as a whole represent 50% of all subjects with impaired glucose tolerance. The prevalence of diabetes mellitus did not differ significantly between men (3.2%) and women (2.7%) (p = 0.47). On the other hand, the prevalence of impaired glucose tolerance among women showed almost twice that found in men (9.1% vs. 5.6%, respectively). Overweight was present in 66.7% of the individuals with diabetes mellitus and 26.5% of individuals with impaired glucose tolerance showed overweight or obesity. Conclusions: Although the prevalence of diabetes mellitus was low, the prevalence of impaired glucose tolerance is considered to be within an intermediary range, suggesting a future increase in the frequency of diabetes in this population.

Adaptable Strut-and-Tie Model for Design and Verification of Four-Pile Caps

A large percentage of pile caps support only one column, and the pile caps in turn are supported by only a few piles. These are typically short and deep members with overall span-depth ratios of less than 1.5. Codes of practice do not provide uniform treatment for the design of these types of pile caps. These members have traditionally been designed as beams spanning between piles with the depth selected to avoid shear failures and the amount of longitudinal reinforcement selected to provide sufficient flexural capacity as calculated by the engineering beam theory. More recently, the strut-and-tie method has been used for the design of pile caps (disturbed or D-region) in which the load path is envisaged to be a three-dimensional truss, with compressive forces being supported by concrete compressive struts between the column and piles and tensile forces being carried by reinforcing steel located between piles. Both of these models have not provided uniform factors of safety against failure or been able to predict whether failure will occur by flexure (ductile mode) or shear (fragile mode). In this paper, an analytical model based on the strut-and-tie approach is presented. The proposed model has been calibrated using an extensive experimental database of pile caps subjected to compression and evaluated analytically for more complex loading conditions. It has been proven to be applicable across a broad range of test data and can predict the failures modes, cracking, yielding, and failure loads of four-pile caps with reasonable accuracy.

Optical study of a light diaphragm rupture process in an expansion tube

Rupture of a light cellophane diaphragm in an expansion tube has been studied by an optical method. The influence of the light diaphragm on test flow generation has long been recognised, however the diaphragm rupture mechanism is less well known. It has been previously postulated that the diaphragm ruptures around its periphery due to the dynamic pressure loading of the shock wave, with the diaphragm material at some stage being removed from the flow to allow the shock to accelerate to the measured speeds downstream. The images obtained in this series of experiments are the first to show the mechanism of diaphragm rupture and mass removal in an expansion tube. A light diaphragm was impulsively loaded via a shock wave and a series of images was recorded holographically throughout the rupture process, showing gradual destruction of the diaphragm. Features such as the diaphragm material, the interface between gases, and a reflected shock were clearly visualised. Both qualitative and quantitative aspects of the rupture dynamics were derived from the images and compared with existing one-dimensional theory.

The determination of the design strength of granite used as external cladding for buildings

This chapter is concerned with acquisition and analysis of test data for determining whether or not the flexural strength of granite cladding under extreme conditions is adequate to assure that reliability requirements are satisfied.

A framework for specification-based testing

Test templates and a test template framework are introduced as useful concepts in specification-based testing. The framework can be defined using any model-based specification notation and used to derive tests from model-based specifications-in this paper, it is demonstrated using the Z notation. The framework formally defines test data sets and their relation to the operations in a specification and to other test data sets, providing structure to the testing process. Flexibility is preserved, so that many testing strategies can be used. Important application areas of the framework are discussed, including refinement of test data, regression testing, and test oracles.

Fracture resistance of Class II glass-ionomer cement restorations

Purpose: To investigate in vitro the effect of retentive grooves, GIC type and insertion method on the fracture resistance of Class II glass-ionomer cement (GIC) restorations. Methods: Premolars were divided into 12 groups (n=10) according to three variables: retentive grooves [presence (PR) or absence AR)], GICs type [Ketac-Molar (KM), Fuji VIII (F8) and RelyX Luting (RX)], and insertion method [syringe injector (SI) or spoon excavator (SE)]. The specimens were subjected to fracture resistance test. Data were submitted to three-way ANOVA and multiple comparisons were performed using a Tukey test (P < 0.05). Results: Mean fracture resistance values (Kgf) +/- standard deviations (SD) were: KM (PR+SI) 65.66 +/- 2.5; KM (PR+SE) = 62.58 +/- 2.1; KM (AR+SI) = 57.11 +/- 1.9; KM (AR+SE) = 51.94 +/- 2.3; F8 (PR+SI) = 63.05 +/- 2.1; F8 (PR+SE) = 60.12 +/- 2.3; F8 (AR+SI) = 55.11 +/- 1.9; F8(AR+SE)=49.20 +/- 1.6; RX (PR+SI)=50.99 +/- 2.4; RX (PR+SE)=48.81 +/- 2.5; RX (AR+SI)=45.53 +/- 2.6; RX (AR+SE)=41.88 +/- 3.0. Statistically significant differences were observed among all the groups tested (P=0.001). There was significant difference when pooled means for GIC type were compared with retentive grooves (P=0.01) and when pooled means for retentive grooves were compared with insertion method (P=0.01).

Influence of differently oriented dentin surfaces and the regional variation of specimens on adhesive layer thickness and bond strength

Statement of the Problem: Adhesive systems can spread differently onto a substrate and, consequently, influence bonding. Purpose: The purpose of this study was to evaluate the effect of differently oriented dentin surfaces and the regional variation of specimens on adhesive layer thickness and microtensile bond strength (MTBS). Materials and Methods: Twenty-four molars were sectioned mesiodistally to expose flat buccal and lingual halves. Standardized drop volumes of adhesive systems (Single Bond [SB] and Prime & Bond 2.1 [PB2.1]) were applied to dentin according to the manufacturer`s instructions. Teeth halves were randomly divided into groups: 1A-SB/parallel to gravity; 1B-SB/perpendicular to gravity; 2A-PB2.1/parallel to gravity; and 2B-PB2.1/perpendicular to gravity. The bonded assemblies were stored in 37 degrees C distilled water for 24 hours and then sectioned to obtain dentin sticks (0.8 mm(2)). The adhesive layer thickness was determined in a light microscope (x200), and after 48 hours the specimens were subjected to MTBS test. Data were analyzed by one-way and two-way analysis of variance and Student-Newman-Keuls tests. Results: Mean values (MPa +/- SD) of MTBS were: 39.1 +/- 12.9 (1A); 32.9 +/- 12.4 (1B); 52.9 +/- 15.2 (2A); and 52.3 +/- 16.5 (2B). The adhesive systems` thicknesses (mu m +/- SD) were: 11.2 +/- 2.9 (1A); 18.1 +/- 7.3 (1B); 4.2 +/- 1.8 (2A); and 3.9 +/- 1.3 (2B). No correlation between bond strength and adhesive layer thickness for both SB and PB2.1 (r = -0.224, p = 0.112 and r = 0.099, p = 0.491, respectively) was observed. Conclusions: The differently oriented dentin surfaces and the regional variation of specimens on the adhesive layer thickness are material-dependent. These variables do not influence the adhesive systems` bond strength to dentin. CLINICAL SIGNIFICANCE Adhesive systems have different viscosities and spread differently onto a substrate, influencing the bond strength and also the adhesive layer thickness. Adhesive thickness does not influence dentin bond strength, but it may impair adequate solvent evaporation, polymer conversion, and may also determine water sorption and adhesive degradation over time. In the literature, many studies have shown that the adhesive layer is a permeable membrane and can fail over timebecause ofits continuous plasticizing and degradation when in contact with water. Therefore, avoiding thick adhesive layers may minimize these problems and provide long-term success for adhesive restorations.

Influence of curing rate on softening in ethanol, degree of conversion, and wear of resin composite

Purpose: To investigate the effect of curing rate on softening in ethanol, degree of conversion, and wear of resin composites. Methods: With a given energy density and for each of two different light-curing units (QTH or LED), the curing rate was reduced by modulating the curing mode. Thus, the irradiation of resin composite specimens (Filtek Z250, Tetric Ceram, Esthet-X) was performed in a continuous curing mode and in a pulse-delay curing mode. Wallace hardness was used to determine the softening of resin composite after storage in ethanol. Degree of conversion was determined by infrared spectroscopy (FTIR). Wear was assessed by a three-body test. Data were submitted to Levene`s test, one and three-way ANOVA, and Tukey HSD test (alpha= 0.05). Results: Immersion in ethanol, curing mode, and material all had significant effects on Wallace hardness. After ethanol storage, resin composites exposed to the pulse-delay curing mode were softer than resin composites exposed to continuous cure (P< 0.0001). Tetric Ceram was the softest material followed by Esthet-X and Filtek Z250 (P< 0.001). Only the restorative material had a significant effect on degree of conversion (P< 0.001): Esthet-X had the lowest degree of conversion followed by Filtek Z250 and Tetric Ceram. Curing mode (P= 0.007) and material (P< 0.001) had significant effect on wear. Higher wear resulted from the pulse-delay curing mode when compared to continuous curing, and Filtek Z250 showed the lowest wear followed by Esthet-X and Tetric Ceram. (Am J Dent 2011;24:115-118).

Developments in the understanding of South African style SAG mills

The South African style SAG (RoM) mills operate in a window that is almost exclusive from the operation of the Australian and North American mills that have been used for the development of SAG mill models. Combining good quality, test data from the RoM mills is extending and improving these models, and assisting in a practical manner in improving our understanding of SAG/AG milling. Data from high mill loads, both in absolute filling and ball loading, have been used to extend and improve the JK SAG mill model. This improved understanding has been successfully applied to increasing the throughput of a mill by 8%. Data is presented on relationships between power and load for high mill loading. Slurry pooling is common in closed-circuit RoM mills, and the detrimental effect of this has been dramatically demonstrated at ALCOA with a mill throughput increase of over 20%. Techniques for calculating the effects of slurry pooling have been developed and a new pulp lifter system designed to give optimal slurry discharge. The influence of mill speed in shifting the product size distribution has also been measured. (C) 2001 Elsevier Science Ltd. All rights reserved.