Tolerancia a la salinidad en dos portainjertos de citrus : crecimiento, composición mineral y ajuste osmótico

El objetivo de este trabajo fue evaluar la tolerancia al estrés salino en el portainjerto Citrumelo cultivar 75 AB (Citrus paradisi x Poncirus trifoliata), en comparación con Mandarino Cleopatra (Citrus retuculata), conocido por su elevada tolerancia. Se incubaron plántulas entre toallas de papel, humedecidas con agua destilada o soluciones de NaCl 30 mM. El diseño experimental fue completamente aleatorizado con 3 repeticiones, y los datos se analizaron mediante ANOVA y Test de Tukey. Luego de 41 días de ensayo se determinó el peso fresco, contenido relativo de agua (CRA), concentración de prolina y composición mineral. El crecimiento de Cleopatra fue más sensible a la salinidad que el de Citrumelo cultivar 75 AB. El CRA se mantuvo constante en ambos portainjertos. El ajuste osmótico se realizó mediante la acumulación de prolina en hojas; su concentración fue mayor en Citrumelo 75 AB. Este último excluyó los iones Na+ y Cl- de la parte aérea, restringiéndolos al sistema radicular, mientras que en Cleopatra se observó lo opuesto. Se concluye que Citrumelo cultivar 75 AB es más tolerante a la salinidad que Cleopatra, y excluye los iones Na+ y Cl- de la parte aérea.

Caracterización probabilística de vidrio mediante diferentes tipos de ensayos

El vidrio no puede ser tratado como un material estructural convencional desde el punto de vista de la resistencia mecánica. Su naturaleza, como material frágil, junto con la inevitable presencia de microfisuras en su superficie y las consecuencias de accidentes por posibles fallos, exigen métodos rigurosos que garanticen un cálculo seguro de los elementos estructurales de vidrio, cuya resistencia a rotura depende en gran medida del tamaño del elemento y del tipo de carga a la que está sometido. Por lo tanto, su cálculo debe basarse en conceptos probabilísticos y en criterios de mecánica de la fractura, en sustitución de un cálculo convencional de vidrio según tablas deducidas de programas experimentales y posterior aplicación del concepto de tensiones admisibles. Con el fin de analizar y comparar las características mecánicas de vidrios templados, termoendurecidos y recocidos, se realizó un amplio programa experimental de ensayos de flexión a cuatro puntos y de anillos concéntricos de pequeña superficie, seguido de un ajuste de los resultados mediante una función de distribución triparamétrica de Weibull. Glass cannot be handled as a conventional structural material from the point of view of the mechanical strength. Its nature as brittle material, together with the inevitable presence of micro-cracks on its surface and the consequences of eventual failures, demand rigorous methods to achieve a safe design for glass elements, whose stress resistance is very much dependent on the integrity of its surface, element size and loading pattern. Thus, its design must rely on probabilistic concepts and fracture mechanics criteria, substitutive of the conventional glass design based on charts derived from experimental programs and subsequent application of the admissible stress concept. In order to analyze and compare the strength characteristics of tempered, heat-strengthened and annealed glass, a large experimental programme based on four-point bending and coaxial double ring tests was performed and the results were fitted using a three-parameter Weibull cumulative distribution function.

Sex-specific quantitative trait loci affecting longevity in Drosophila melanogaster

Senescence, the decline in survivorship and fertility with increasing age, is a near-universal property of organisms. Senescence and limited lifespan are thought to arise because weak natural selection late in life allows the accumulation of mutations with deleterious late-age effects that are either neutral (the mutation accumulation hypothesis) or beneficial (the antagonistic pleiotropy hypothesis) early in life. Analyses of Drosophila spontaneous mutations, patterns of segregating variation and covariation, and lines selected for late-age fertility have implicated both classes of mutation in the evolution of aging, but neither their relative contributions nor the properties of individual loci that cause aging in nature are known. To begin to dissect the multiple genetic causes of quantitative variation in lifespan, we have conducted a genome-wide screen for quantitative trait loci (QTLs) affecting lifespan that segregate among a panel of recombinant inbred lines using a dense molecular marker map. Five autosomal QTLs were mapped by composite interval mapping and by sequential multiple marker analysis. The QTLs had large sex-specific effects on lifespan and age-specific effects on survivorship and mortality and mapped to the same regions as candidate genes with fertility, cellular aging, stress resistance and male-specific effects. Late age-of-onset QTL effects are consistent with the mutation accumulation hypothesis for the evolution of senescence, and sex-specific QTL effects suggest a novel mechanism for maintaining genetic variation for lifespan.

ROP-1, an RNA quality-control pathway component, affects Caenorhabditis elegans dauer formation

Caenorhabditis elegans dauer formation is an alternative larval developmental pathway that the worm can take when environmental conditions become detrimental. Animals can survive several months in this stress-resistant stage and can resume normal development when growth conditions improve. Although the worms integrate a variety of sensory information to commit to dauer formation, it is currently unknown whether they also monitor internal cellular damage. The Ro ribonucleoprotein complex, which was initially described as a human autoantigen, is composed of one major 60-kDa protein, Ro60, that binds to one of four small RNA molecules, designated Y RNAs. Ro60 has been shown to bind mutant 5S rRNA molecules in Xenopus oocytes, suggesting a role for Ro60 in 5S rRNA biogenesis. Analysis of ribosomes from a C. elegans rop-1(−) strain, which is null for the expression of Ro60, demonstrated that they contain a high percentage of mutant 5S rRNA molecules, thereby strengthening the notion of a link between the rop-1 gene product and 5S rRNA quality control. The Ro particle was recently shown to be involved in the resistance of Deinococcus radiodurans to UV irradiation, suggesting a role for the Ro complex in stress resistance. We have studied the role of rop-1 in dauer formation. We present genetic and biochemical evidence that rop-1 interacts with dauer-formation genes and is involved in the regulation of the worms' entry into the dauer stage. Furthermore, we find that the rop-1 gene product undergoes a proteolytic processing step that is regulated by the dauer formation pathway via an aspartic proteinase. These results suggest that the Ro particle may function in an RNA quality-control checkpoint for dauer formation.

Hyperosmolality in the form of elevated NaCl but not urea causes DNA damage in murine kidney cells

This study demonstrates, by using neutral comet assay and pulsed field gel electrophoresis, that hyperosmotic stress causes DNA damage in the form of double strand breaks (dsb). Different solutes increase the rate of DNA dsb to different degrees at identical strengths of hyperosmolality. Hyperosmolality in the form of elevated NaCl (HNa) is most potent in this regard, whereas hyperosmolality in the form of elevated urea (HU) does not cause DNA dsb. The amount of DNA dsb increases significantly as early as 15 min after the onset of HNa. By using neutral comet and DNA ladder assays, we show that this rapid induction of DNA damage is not attributable to apoptosis. We demonstrate that renal inner medullary cells are able to efficiently repair hyperosmotic DNA damage within 48 h after exposure to hyperosmolality. DNA repair correlates with cell survival and is repressed by 25 μM LY294002, an inhibitor of DNA-activated protein kinases. These results strongly suggest that the hyperosmotic stress resistance of renal inner medullary cells is based not only on adaptations that protect cellular proteins from osmotic damage but, in addition, on adaptations that compensate DNA damage and maintain genomic integrity.

Plant genetic resources: What can they contribute toward increased crop productivity?

To feed a world population growing by up to 160 people per minute, with >90% of them in developing countries, will require an astonishing increase in food production. Forecasts call for wheat to become the most important cereal in the world, with maize close behind; together, these crops will account for ≈80% of developing countries’ cereal import requirements. Access to a range of genetic diversity is critical to the success of breeding programs. The global effort to assemble, document, and utilize these resources is enormous, and the genetic diversity in the collections is critical to the world’s fight against hunger. The introgression of genes that reduced plant height and increased disease and viral resistance in wheat provided the foundation for the “Green Revolution” and demonstrated the tremendous impact that genetic resources can have on production. Wheat hybrids and synthetics may provide the yield increases needed in the future. A wild relative of maize, Tripsacum, represents an untapped genetic resource for abiotic and biotic stress resistance and for apomixis, a trait that could provide developing world farmers access to hybrid technology. Ownership of genetic resources and genes must be resolved to ensure global access to these critical resources. The application of molecular and genetic engineering technologies enhances the use of genetic resources. The effective and complementary use of all of our technological tools and resources will be required for meeting the challenge posed by the world’s expanding demand for food.

Estudo da função de keaA no controle do crescimento, desenvolvimento e resposta a estresses em Dictyostelium discoideum

O ciclo de vida de Dictyostelium discoideum é composto de duas fases independentes. Durante o crescimento vegetativo, as amebas crescem isoladas até que a fonte de nutrientes seja esgotada. A carência nutricional induz sua entrada num processo de desenvolvimento, que inclui a parada do crescimento, a agregação das células e a formação de um organismo multicelular onde as células se diferenciam em esporos que sobrevivem as condições desfavoráveis. A proteína quinase YakA é requerida para a transição entre o crescimento e o desenvolvimento. YakA regula os níveis da PKA. Mutantes yakA- apresentam o crescimento acelerado, são deficientes no processo de agregação e são hiper-sensíveis a estresse oxidativo e nitrosoativo. Uma mutação em um segundo sítio em keaA, suprime a morte induzida por SNP (um gerador de óxido nítrico) no mutante yakA-. O papel de keaA foi determinado em resposta a estresse oxidativo, nitrosoativo e carênica nutricional. O gene keaA é necessário para o crescimento e desenvolvimento. Uma mutação em keaA confere resistência a estresse nitrosoativoloxidativo confirmando que uma mutação em keaA confere resistência a estresse. Um segundo supressor da morte induzida por SNP no mutante yakA- foi isolado pela mesma técnica de REMI e identificado como pkaC um regulador da resposta a estresse. YakA e PKA integradam a resposta a vários estresse em Dictyostelium. Os resultados indicam que a yakA regula a parada do ciclo celular em resposta a estresses através da modulação de keaA. keaA regula, por sua vez, a expressão da pkaC, um regulador chave da produção de cAMP e do processo de desenvolvimento. A interação gênica entre estes elementos é complexa e deve ser ajustada para permitir que as células sobrevivam a mudanças ambientais encontradas durante o seu ciclo de vida.

Drosophila melanogaster larvae make nutritional choices that minimize developmental time

Organisms from slime moulds to humans carefully regulate their macronutrient intake to optimize a wide range of life history characters including survival, stress resistance, and reproductive success. However, life history characters often differ in their response to nutrition, forcing organisms to make foraging decisions while balancing the trade-offs between these effects. To date, we have a limited understanding of how the nutritional environment shapes the relationship between life history characters and foraging decisions. To gain insight into the problem, we used a geometric framework for nutrition to assess how the protein and carbohydrate content of the larval diet affected key life history traits in the fruit fly, Drosophila melanogaster. In no-choice assays, survival from egg to pupae, female and male body size, and ovariole number - a proxy for female fecundity - were maximized at the highest protein to carbohydrate (P:C) ratio (1.5:1). In contrast, development time was minimized at intermediate P:C ratios, around 1:2. Next, we subjected larvae to two-choice tests to determine how they regulated their protein and carbohydrate intake in relation to these life history traits. Our results show that larvae targeted their consumption to P:C ratios that minimized development time. Finally, we examined whether adult females also chose to lay their eggs in the P:C ratios that minimized developmental time. Using a three-choice assay, we found that adult females preferentially laid their eggs in food P:C ratios that were suboptimal for all larval life history traits. Our results demonstrate that D. melanogaster larvae make foraging decisions that trade-off developmental time with body size, ovariole number, and survival. In addition, adult females make oviposition decisions that do not appear to benefit the larvae. We propose that these decisions may reflect the living nature of the larval nutritional environment in rotting fruit. These studies illustrate the interaction between the nutritional environment, life history traits, and foraging choices in D. melanogaster, and lend insight into the ecology of their foraging decisions.

The biology of the crustose lichen Rhizocarpon geographicum

The crustose lichen Rhizocarpon geographicum (L.) DC. comprises yellow-green lichenized areolae which develop and grow on the surface of a non-lichenized fungal hypothallus, the latter extending beyond the edge of the areolae to form a marginal ring. The hypothallus advances very slowly and the considerable longevity of R. geographicum, especially in Arctic and Alpine environments, has been exploited by geologists in dating the exposure age of rock surfaces (lichenometry). This review explores various aspects of the biology of R. geographicum including: (1) structure and symbionts, (2) lichenization, (3) development of areolae, (4) radial growth rates (RaGR), (5) growth physiology, (6) changes in RaGR with thallus size (growth ratesize curve), (7) maturity and senescence, and (8) aspects of ecology. Lichenization occurs when fungal hyphae become associated with a compatible species of the alga Trebouxia, commonly found free-living on the substratum. Similarly, 'primary' areolae develop from free-living algal cells trapped by the advancing hypothallus. The shape of the growth rate-size curve of R. geographicum is controversial but may exhibit a phase of decreasing growth in larger thalli. Low rates of translocation of carbohydrate to the hypothallus together with allocation for stress resistance results in very slow RaGR, a low demand for nutrients, hence, the ability of R. geographicum to colonize more extreme environments. Several aspects of the biology of R. geographicum have implications for lichenometry including early development, mortality rates, the shape of the growth-rate size curve, and competition. © The Author(s) 2012.

Lichen competition: two-dimensional warfare in slow motion

Lichens, a symbiotic association between a filamentous fungus and an alga, are often dominant in stressful environments such as the surfaces of rock and tree bark. Under these conditions, lichens experience extremes of temperature, moisture supply, and low availability of nutrients. As a consequence, lichens sequester a high proportion of their carbon production for stress resistance rather than for growth. Hence, as a group lichens are particularly slow growing organisms with many species growing at less than 2mm per year and some at less than 0.5mm per year. Whether or not competition occurs between lichen thalli in these communities is controversial. This article discusses the evidence that competition occurs between lichens on rock and tree bark and assesses whether competitive effects are likely to be important in structuring these communities.

Growth of crustose lichens: a review

Crustose species are the slowest growing of all lichens. Their slow growth and longevity, especially of the yellow-green Rhizocarpon group, has made them important for surface-exposure dating (‘lichenometry’). This review considers various aspects of the growth of crustose lichens revealed by direct measurement including: 1) early growth and development, 2) radial growth rates (RGR, mm yr-1), 3) the growth rate-size curve, and 4) the influence of environmental factors. Many crustose species comprise discrete areolae that contain the algal partner growing on the surface of a non-lichenised fungal hypothallus. Recent data suggest that ‘primary’ areolae may develop from free-living algal cells on the substratum while ‘secondary’ areolae develop from zoospores produced within the thallus. In more extreme environments, the RGR of crustose species may be exceptionally slow but considerably faster rates of growth have been recorded under more favourable conditions. The growth curves of crustose lichens with a marginal hypothallus may differ from the ‘asymptotic’ type of curve recorded in foliose and placodioid species and the latter are characterized by a phase of increasing RGR to a maximum and may be followed by a phase of decreasing growth. The decline in RGR in larger thalli may be attributable to a reduction in the efficiency of translocation of carbohydrate to the thallus margin or to an increased allocation of carbon to support mature ‘reproductive’ areolae. Crustose species have a low RGR accompanied by a low demand for nutrients and an increased allocation of carbon for stress resistance; therefore enabling colonization of more extreme environments.

An assessment of the performance of high density polyethylene copolymers for natural gas distribution pipes

The total thermoplastics pipe market in west Europe is estimated at 900,000 metric tonnes for 1977 and is projected to grow to some 1.3 million tonnes of predominantly PVC and polyolefins pipe by 1985. By that time, polyethylene for gas distribution pipe and fittings will represent some 30% of the total polyethylene pipe market. The performance characteristics of a high density polyethylene are significantly influenced by both molecular weight and type of comonomer; the major influences being in the long-term hoop stress resistance and the environmental stress cracking resistance. Minor amounts of hexene-1 are more effective than comonomers lower in the homologous series, although there is some sacrifice of density related properties. A synergistic improvement is obtained by combining molecular weight increase with copolymerisation. The Long-term design strength of polyethylene copolymers can be determined from hoop stress measurement at elevated temperatures and by means of a separation factor of approximate value 22, extrapolation can be made to room temperature performance for a water environment. A polyethylene of black composition has a sufficiently improved performance over yellow pigmented pipe to cast doubts on the validity of internationally specifying yellow coded pipe for gas distribution service. The chemical environment (condensate formation) that can exist in natural gas distribution networks has a deleterious effect on the pipe performance the reduction amounting to at least two decades in log time. Desorption of such condensate is very slow and the influence of the more aggressive aromatic components is to lead to premature stress cracking. For natural gas distribution purposes, the design stress rating should be 39 Kg/cm2 for polyethylenes in the molecular weight range of 150 - 200,000 and 55 Kg/cm2 for higher molecular weight materials.

Specific lipidome signatures in central nervous system from methionine-restricted mice

Membrane lipid composition is an important correlate of the rate of aging of animals. Dietary methionine restriction (MetR) increases lifespan in rodents. The underlying mechanisms have not been elucidated but could include changes in tissue lipidomes. In this work, we demonstrate that 80% MetR in mice induces marked changes in the brain, spinal cord, and liver lipidomes. Further, at least 50% of the lipids changed are common in the brain and spinal cord but not in the liver, suggesting a nervous system-specific lipidomic profile of MetR. The differentially expressed lipids includes (a) specific phospholipid species, which could reflect adaptive membrane responses, (b) sphingolipids, which could lead to changes in ceramide signaling pathways, and (c) the physiologically redox-relevant ubiquinone 9, indicating adaptations in phase II antioxidant response metabolism. In addition, specific oxidation products derived from cholesterol, phosphatidylcholine, and phosphatidylethanolamine were significantly decreased in the brain, spinal cord, and liver from MetR mice. These results demonstrate the importance of adaptive responses of membrane lipids leading to increased stress resistance as a major mechanistic contributor to the lowered rate of aging in MetR mice. © 2013 American Chemical Society.

Polyols in the crustose lichen Rhizocarpon geographicum

A lichen is an intimate association between an alga and a fungus and is regarded as one of the best examples of ‘mutualism’ or ‘symbiosis’ involving microorganisms. In lichens which have Trebouxia as the algal partner, photosynthesis by the algae results in the production of the soluble polyol ribitol which is then transported to the fungus where it is converted to arabitol and mannitol. Within the fungus, arabitol may act as a short-term carbohydrate reserve while mannitol may be involved in stress resistance. The crustose lichen Rhizocarpon geographicum (L.) DC., has an unusual thallus structure consisting of discrete granules (areolae) containing the algal component growing in association with a non-lichenised fungal hypothallus that extends beyond the areolae to form a marginal ring. The concentrations of ribitol, arabitol, and mannitol were measured, using gas chromatography, in the central areolae and marginal hypothallus of the crustose lichen Rhizocarpon geographicum (L.) DC. growing on slate rocks in north Wales, UK. The concentrations of all three polyols were greater in the central areolae than in the marginal hypothallus. In addition, the ratios of polyols in the marginal hypothallus to that in the central areolae varied through the year. The concentration of an individual poyol in the hypothallus was correlated primarily with the concentrations of the other polyols in the hypothallus and not to their concentrations in the areolae. Low concentration of ribitol, arabitol, and mannitol in the marginal hypothallus compared with the central areolae suggests either a lower demand for carbohydrate by the hypothallus or limited transport of polyols from areolae to hypothallus, and may explain the low growth rates of this species. In addition, polyols appear to be partitioned differently through the year with an increase in mannitol compared with arabitol in more stressful periods.

Concentration of mannitol and other soluble carbohydrates in the crustose lichen Rhizocarpon geographicum

In symbiotic lichens which have Trebouxia as the algal partner, photosynthesis by the algae results in the production of the soluble carbohydrate ribitol which is then transported to the fungus where it is converted to arabitol and mannitol. Within the fungus, arabitol may act as a short-term carbohydrate reserve while mannitol may have a more protective function and be important in stress resistance. The concentrations of ribitol, arabitol, and mannitol were measured, using gas chromatography, in the central areolae and marginal hypothallus of the crustose lichen Rhizocarpon geographicum (L.) DC. growing on slate rocks in north Wales, UK. The concentrations of all three soluble carbohydrates were greater in the central areolae than in the marginal prothallus. In addition, the ratio of mannitol in the prothallus to that in the areolae was least in July. The concentration of an individual carbohydrate in the prothallus was correlated primarily with the concentrations of the other carbohydrates in the prothallus and not to their concentrations in the areolae. Low concentration of ribitol, arabitol, and mannitol in the marginal prothallus compared with the central areolae suggests either a lower demand for carbohydrate by the prothallus or limited transport from areolae to prothallus and may explain the low growth rates of this species. In addition, soluble carbohydrates appear to be partitioned differently through the year with an increase in mannitol compared with arabitol in more stressful periods.