The fatigue properties of pressure diecast zinc-aluminium based alloys

The fatigue behaviour of the cold chamber pressure-die-cast alloys: Mazak3, ZA8, ZA27, M3K, ZA8K, ZA27K, K1, K2 and K3 was investigated at temperature of 20°C. The alloys M3K, ZA8K and ZA27K were also examined at temperatures of 50 and 100°C. The ratio between fatigue strength and tensile strength was established at 20°C at 107 cycles. The fatigue life prediction of the alloys M3K, ZA8K and ZA27K was formulated at 20, 50 and 100°C. The prediction formulae were found to be reasonably accurate. All of the experimental alloys were heterogeneous and contained large but varying amounts of pores. These pores were a major contribution and dominated the alloys fatigue failure. Their effect, however, on tensile failure was negligible. The ZA27K possessed the highest tensile strength but the lowest fatigue strength. The relationship between the fracture topography and the microstructure was also determined by the use of a mixed signal of a secondary electron and a back-scattered electron on the SEM. The tensile strength of the experimental alloys was directly proportional to the aluminium content within the alloys. The effect of copper content was also investigated within the alloys K1, K2, ZA8K and K3 which contained 0%, 0.5%, 1.0% and 2.0% respectively. It was determined that the fatigue and tensile strengths improved with higher copper contents. Upon ageing the alloys Mazak3, ZA8 and ZA27 at an ambient temperature for 5 years, copper was also found to influence and maintain the metastable Zn-Al (αm) phase. The copper free Mazak3 upon ageing lost this metastable phase. The 1.0% copper ZA8 alloy had lost almost 50% of its metastable phase. Finally the 2.0% copper ZA27 had merely lost 10% of its metastable phase. The cph zinc contained a limited number of slip systems, therefore twinning deformation was unavoidable in both fatigue and tensile testing.

Preparation, optimisation and characterisation of lyophilised rapid disintegrating tablets based on gelatin and saccharide

Despite recent success, rapidly disintegrating lyophilized tablets still face problems of low mechanical strength and higher disintegration times resulting in poor patient compliance. The aim of the current work was to carry out a systematic study to understand the factors controlling mechanical properties of these formulations. The work investigated the influence of two bloom strengths of gelatin: low (60 bloom) and high (225 bloom) at different stock solution concentrations (2, 5, 7.5, and 10 %w/w). This was followed by investigation of addition of five saccharides (xylitol, glucose, trehalose, maltotriose and mannitol) at varied concentration range (10-80 %w/w) to decipher their influence on disintegration time, mechanical and thermal properties of the formulation. The results indicated that the disintegration time of the tablets dramatically decreased by decreasing the concentration and bloom strength of gelatin in the stock solution. However the mechanical properties of the tablets were mainly influenced by the concentration of gelatin rather than the bloom strength. The addition of saccharides resulted in enhancement of tablet properties and was concentration dependent. All the saccharides improved the fractubility of the tablets significantly at high concentration (equal or higher than 40% w/w). However, only high concentration (equal or higher than 40% w/w) of trehalose, maltotriose and mannitol significantly enhanced the hardness. Additionally, mannitol crytallised during freeze drying and consequently produced elegant tablets, whilst the other saccarides exhibited lyoprotectant activity as they were able to retain amorphous status. Based on the above findings, an optimized formulation was also successfully developed and characterized to deliver 100 microg dose of Clonidine HCl.

The innovation value chain in new technology-based firms:evidence from the U.K.

Innovation is central to the survival and growth of firms, and ultimately to the health of the economies of which they are part. A clear understanding both of the processes by which firms perform innovation and the benefits which flow from innovation in terms of productivity and growth is therefore essential. This paper demonstrates the use of a conceptual framework and modeling tool, the innovation value chain (IVC), and shows how the IVC approach helps to highlight strengths and weaknesses in the innovation performance of a key group of firms-new technology-based firms. The value of the IVC is demonstrated in showing the key interrelationships in the whole process of innovation from sourcing knowledge through product and process innovation to performance in terms of the growth and productivity outcomes of different types of innovation. The use of the IVC highlights key complementarities, such as that between internal R&D, external R&D, and other external sources of knowledge. Other important relationships are also highlighted. Skill resources matter throughout the IVC, being positively associated with external knowledge linkages and innovation success, and also having a direct influence on growth independent of the effect on innovation. A key benefit of the IVC approach is therefore its ability to highlight the roles of different factors at various stages of the knowledge-innovation-performance nexus, and to show their indirect as well as direct impact. This in turn permits both managerial and policy implications to be drawn. © 2012 Product Development & Management Association.

Liquid level sensor based on an excessively tilted fibre grating

We propose and demonstrate an optical liquid level sensor based on the surrounding medium refractive index (SRI) sensing using an excessively tilted fibre grating (ETFG). When the ETFG submerged in water, two sets of cladding modes are coupled, corresponding to air- and water-surrounded grating structures, respectively. The coupling strengths of the two sets of cladding modes evolve with the submerging length of the grating, providing a mechanism to measure the liquid level. Comparing with long-period fibre grating based liquid level sensor, the ETFG sensor has a much higher SRI responsivity for liquids with refractive index around 1.33 and a lower thermal cross sensitivity. © 2013 Published by Elsevier B.V. All rights reserved.

Supercritical carbonation of lime based sustainable structural ceramics

Abstract Structural ceramics were manufactured from industrial byproducts and lime by a compression moulding/vacuum dewatering technique. Treatment of these ceramics with supercritical carbon dioxide was found to both significantly increase their flexural strength and activate cementation in the industrial byproducts at least as efficiently as heat curing. Flexural strengths of up to 10 MPa were achieved. Strength improvements were associated with decreased porosity and conversion of calcium hydroxide to calcium carbonate. Life cycle assessment of proposed products made from such materials indicated that the total reduction in embodied carbon dioxide achieved, as a result of combining use of byproducts with recombination of carbon dioxide, was up to 70%. © 2010 Institute of Materials, Minerals and Mining.

The strengths, weaknesses, opportunities and threats of using social software in higher and further education teaching and learning

Social software is increasingly being used in higher and further education to support teaching and learning processes. These applications provide students with social and cognitive stimulation and also add to the interaction between students and educators. However, in addition to the benefits the introduction of social software into a course environment can also have adverse implications on students, educators and the education institution as a whole, a phenomenon which has received much less attention in the literature. In this study we explore the various implications of introducing social software into a course environment in order to identify the associated benefits, but also the potential drawbacks. We draw on data from 20 social software initiatives in UK based higher and further education institutions to identify the diverse experiences and concerns of students and educators. The findings are presented in form of a SWOT analysis, which allows us to better understand the otherwise ambiguous implications of social software in terms of its strengths, weaknesses, opportunities and threats. From the analysis we have derived concrete recommendations for the use of social software as a teaching and learning tool.

Extruded colour-based plastic film for the measurement of dissolved CO2

Dissolved CO2 measurements are usually made using a Severinghaus electrode, which is bulky and can suffer from electrical interference. In contrast, optical sensors for gaseous CO2, whilst not suffering these problems, are mainly used for making gaseous (not dissolved) CO2 measurements, due to dye leaching and protonation, especially at high ionic strengths (>0.01 M) and acidity (<pH 4). This is usually prevented by coating the sensor with a gas-permeable, but ion-impermeable, membrane (GPM). Herein, we introduce a highly sensitive, colourimetric-based, plastic film sensor for the measurement of both gaseous and dissolved CO2, in which a pH-sensitive dye, thymol blue (TB) is coated onto particles of hydrophilic silica to create a CO2-sensitive, TB-based pigment, which is then extruded into low density polyethylene (LDPE) to create a GPM-free, i.e. naked, TB plastic sensor film for gaseous and dissolved CO2 measurements. When used for making dissolved CO2 measurements, the hydrophobic nature of the LDPE renders the film: (i) indifferent to ionic strength, (ii) highly resistant to acid attack and (iii) stable when stored under ambient (dark) conditions for >8 months, with no loss of colour or function. Here, the performance of the TB plastic film is primarily assessed as a dissolved CO2 sensor in highly saline (3.5 wt%) water. The TB film is blue in the absence of CO2 and yellow in its presence, exhibiting 50% transition in its colour at ca. 0.18% CO2. This new type of CO2 sensor has great potential in the monitoring of CO2 levels in the hydrosphere, as well as elsewhere, e.g. food packaging and possibly patient monitoring.

A universally delivered CBT based intervention in a Scottish secondary school: a pilot feasibility study

Objectives: To evaluate the feasibility of a universally delivered CBT-based programme for pupils within a Scottish secondary school setting. Design: A pre-post, within and between groups design was utilised. Setting: Religious Moral Citizenship and Education (RMCE) classes in a Scottish secondary school. Participants: Four (n = 103) classes of third year secondary school pupils were arbitrarily allocated to two conditions: RMCE-as usual (RMCE-AU) controls, and LLTTF intervention. Intervention: Living Life to the Full (LLTTF) is a series of Cognitive Behavioural Therapy (CBT)-based booklets and accompanying 8 classes to improve coping skills. An adolescent version of LLTTF was recently developed. This was delivered over nine weeks by school teachers trained in the approach. Outcome measures: The Strengths and Difficulties Questionnaire, Rosenberg Self-Esteem scale, General Self-Efficacy Scale, and Locus of Control scale were administered at baseline and 9 week follow-up. To determine acceptability and utility of the materials course feedback was gathered weekly from the intervention group and a focus group (n=5) was conducted at 3 month follow up. Results: Outcome measures showed no significant improvement in overall wellbeing of those in the intervention group compared with that of the control group. Weekly feedback suggested that the majority of pupils found the materials useful and relevant. Focus group feedback suggested that pupils found the intervention useful, had utilised strategies in everyday life and would welcome recurring provision of such interventions within the school setting. Conclusions: Universally delivered CBT intervention is acceptable and feasible within the secondary school environment. However, objective measurement using standardised tools does not adequately corroborate qualitative feedback from pupils. Issues relating to measurement, study design and implementation of future interventions are discussed.

“Enjoy your baby” Internet-based CBT for mothers with babies: a feasibility randomised control trial

Background: Postnatal depression is a global health problem with lasting effects on the family. Government policy is focussed on early intervention and increasing access to psychological therapies. There is a growing evidence base for the use of computerised CBT packages and this study investigated the feasibility of a CBT-based self-help internet intervention for new mothers. Objective: To assess the ability to recruit mothers, deliver an internet course, obtain follow-up data and evaluate what mothers think of the course. Design: A feasibility randomised control design was used to compare a waiting list control group (delayed access= DA) to the Enjoy Your Baby course (immediate access= IA). Measures were administered at baseline and 8 week follow-up. Methods: Adverts were placed in the Metro freesheet, on charity web pages, on social media, posters were put up in the community, and leaflets were handed out at mother and baby groups. Participants had to be 18 years old or over with a child less than 18 months old. The IA arm was given access to the course straight away. After 8 weeks all participants were asked to recomplete the original measures and those in the IA arm also gave feedback on the course. Participants in the DA arm were given access after recompleting the questionnaires. Due to a lack of follow-up data a small discussion group was conducted. Intervention: The course contains 4 core modules including helping mothers understand why they feel the way they do and helping them build closeness to their babies. Additional modules, worksheets and homework tasks were available. The DA group were given a list of additional support resources and services, and encouraged to seek additional help if required. All participants received weekly automated emails for 12 weeks as they worked through the course. It was not possible to deliver individualised support. 34 Results: Despite using a number of recruitment strategies, recruitment was lower and slower than anticipated, and attrition was high. 41 women, primarily recruited via the internet, were randomised (IA n=21, DA n=20). No significant differences were observed between participants in either arm at baseline and no statistically significant differences were identified when the demographics and baseline measures of participants who logged-on to the course were compared to those who did not, or when participants who completed follow-up measures were compared to those who did not. Pre and post intervention scores on the EPDS approached statistical significance (P=.059, r=.444) favouring the intervention arm. The discussion group suggested strengths of the course and recommended areas for improvement, including making the course more mobile friendly. Conclusion: Internet interventions show promise; however it is difficult to recruit mothers, engagement is low and attrition high. A number of recommendations are made and a further pilot or an internal pilot of a larger substantive study should be conducted to confirm recruitment and retention. Trial ID: ISRCTN90927910.

Effects of an in-service training program using the routines-based interview

The focus of this study is an in-service training program rooted in routines-based early intervention and designed to improve the quality of goals and objectives on individualized plans. Participants were local intervention team members and other professionals who worked closely with each team. This training program involved a small number of trainees per group, providing multiple learning experiences across time and various opportunities for self-assessment and monitoring. We investigated (a) the perceptions of the participants about the strengths and weaknesses of the training program, (b) medium-term outcomes of the training with a comparison group, (c) and variables associated with the quality of goals and objectives. This study involved training more than 200 professionals, and results support the effectiveness of the program in improving the quality of goals and objectives, showing the importance of the routines-based interview in producing that improvement.

Vision-Based Solutions for Human-Robot Collaboration in Industrial Workcells

Industrial robots are both versatile and high performant, enabling the flexible automation typical of the modern Smart Factories. For safety reasons, however, they must be relegated inside closed fences and/or virtual safety barriers, to keep them strictly separated from human operators. This can be a limitation in some scenarios in which it is useful to combine the human cognitive skill with the accuracy and repeatability of a robot, or simply to allow a safe coexistence in a shared workspace. Collaborative robots (cobots), on the other hand, are intrinsically limited in speed and power in order to share workspace and tasks with human operators, and feature the very intuitive hand guiding programming method. Cobots, however, cannot compete with industrial robots in terms of performance, and are thus useful only in a limited niche, where they can actually bring an improvement in productivity and/or in the quality of the work thanks to their synergy with human operators. The limitations of both the pure industrial and the collaborative paradigms can be overcome by combining industrial robots with artificial vision. In particular, vision can be exploited for a real-time adjustment of the pre-programmed task-based robot trajectory, by means of the visual tracking of dynamic obstacles (e.g. human operators). This strategy allows the robot to modify its motion only when necessary, thus maintain a high level of productivity but at the same time increasing its versatility. Other than that, vision offers the possibility of more intuitive programming paradigms for the industrial robots as well, such as the programming by demonstration paradigm. These possibilities offered by artificial vision enable, as a matter of fact, an efficacious and promising way of achieving human-robot collaboration, which has the advantage of overcoming the limitations of both the previous paradigms yet keeping their strengths.

[almost An Autobiography: A Study Of Social Scientists In Health Based On The Lattes Curriculum].

Among the various ways of adopting the biographical approach, we used the curriculum vitaes (CVs) of Brazilian researchers who work as social scientists in health as our research material. These CVs are part of the Lattes Platform of CNPq - the National Council for Scientific and Technological Development, which includes Research and Institutional Directories. We analyzed 238 CVs for this study. The CVs contain, among other things, the following information: professional qualifications, activities and projects, academic production, participation in panels for the evaluation of theses and dissertations, research centers and laboratories and a summarized autobiography. In this work there is a brief review of the importance of autobiography for the social sciences, emphasizing the CV as a form of autobiographical practice. We highlight some results, such as it being a group consisting predominantly of women, graduates in social sciences, anthropology, sociology or political science, with postgraduate degrees. The highest concentration of social scientists is located in Brazil's southern and southeastern regions. In some institutions the main activities of social scientists are as teachers and researchers with great thematic diversity in research.

Phylogenetics, Ancestral State Reconstruction, And A New Infrafamilial Classification Of The Pantropical Ochnaceae (medusagynaceae, Ochnaceae S.str., Quiinaceae) Based On Five Dna Regions.

Ochnaceae s.str. (Malpighiales) are a pantropical family of about 500 species and 27 genera of almost exclusively woody plants. Infrafamilial classification and relationships have been controversial partially due to the lack of a robust phylogenetic framework. Including all genera except Indosinia and Perissocarpa and DNA sequence data for five DNA regions (ITS, matK, ndhF, rbcL, trnL-F), we provide for the first time a nearly complete molecular phylogenetic analysis of Ochnaceae s.l. resolving most of the phylogenetic backbone of the family. Based on this, we present a new classification of Ochnaceae s.l., with Medusagynoideae and Quiinoideae included as subfamilies and the former subfamilies Ochnoideae and Sauvagesioideae recognized at the rank of tribe. Our data support a monophyletic Ochneae, but Sauvagesieae in the traditional circumscription is paraphyletic because Testulea emerges as sister to the rest of Ochnoideae, and the next clade shows Luxemburgia+Philacra as sister group to the remaining Ochnoideae. To avoid paraphyly, we classify Luxemburgieae and Testuleeae as new tribes. The African genus Lophira, which has switched between subfamilies (here tribes) in past classifications, emerges as sister to all other Ochneae. Thus, endosperm-free seeds and ovules with partly to completely united integuments (resulting in an apparently single integument) are characters that unite all members of that tribe. The relationships within its largest clade, Ochnineae (former Ochneae), are poorly resolved, but former Ochninae (Brackenridgea, Ochna) are polyphyletic. Within Sauvagesieae, the genus Sauvagesia in its broad circumscription is polyphyletic as Sauvagesia serrata is sister to a clade of Adenarake, Sauvagesia spp., and three other genera. Within Quiinoideae, in contrast to former phylogenetic hypotheses, Lacunaria and Touroulia form a clade that is sister to Quiina. Bayesian ancestral state reconstructions showed that zygomorphic flowers with adaptations to buzz-pollination (poricidal anthers), a syncarpous gynoecium (a near-apocarpous gynoecium evolved independently in Quiinoideae and Ochninae), numerous ovules, septicidal capsules, and winged seeds with endosperm are the ancestral condition in Ochnoideae. Although in some lineages poricidal anthers were lost secondarily, the evolution of poricidal superstructures secured the maintenance of buzz-pollination in some of these genera, indicating a strong selective pressure on keeping that specialized pollination system.

Ihwg-μnir: A Miniaturised Near-infrared Gas Sensor Based On Substrate-integrated Hollow Waveguides Coupled To A Micro-nir-spectrophotometer.

A miniaturised gas analyser is described and evaluated based on the use of a substrate-integrated hollow waveguide (iHWG) coupled to a microsized near-infrared spectrophotometer comprising a linear variable filter and an array of InGaAs detectors. This gas sensing system was applied to analyse surrogate samples of natural fuel gas containing methane, ethane, propane and butane, quantified by using multivariate regression models based on partial least square (PLS) algorithms and Savitzky-Golay 1(st) derivative data preprocessing. The external validation of the obtained models reveals root mean square errors of prediction of 0.37, 0.36, 0.67 and 0.37% (v/v), for methane, ethane, propane and butane, respectively. The developed sensing system provides particularly rapid response times upon composition changes of the gaseous sample (approximately 2 s) due the minute volume of the iHWG-based measurement cell. The sensing system developed in this study is fully portable with a hand-held sized analyser footprint, and thus ideally suited for field analysis. Last but not least, the obtained results corroborate the potential of NIR-iHWG analysers for monitoring the quality of natural gas and petrochemical gaseous products.

Can We Predict The Clinical Outcomes Of Genitourinary Trauma Patients And Offer Them An Evidence-based Support? The Case For Telemedicine Network.

32