Effectiveness of commercial harvesting in controlling feral-pig populations

Context. The feral pig (Sus scrofa) is a widespread pest species in Australia and its populations are commonly controlled to reduce damage to agriculture and the environment. Feral pigs are also a resource and harvested for commercial export as game meat. Although many other control techniques are used, commercial harvesting of feral pigs is often encouraged by land managers, because it carries little or no cost and is widely perceived to control populations. Aims. To use feral-pig harvesting records, density data and simple harvest models to examine the effectiveness of commercial harvesting to reduce feral-pig populations. Methods. The present study examined commercial harvest off-take on six sites (246-657 km2) in southern Queensland, and 20 large blocks (~2-6000 km2) throughout Queensland. The harvest off-take for each site was divided by monthly or average annual population size, determined by aerial survey, to calculate monthly and annual harvest rates.Asimple harvest model assuming logistic population growth was used to determine the likely effectiveness of harvesting. Key results. Commercial harvest rates were generally low (<~20%) and are likely to provide only modest reductions in population size. Additionally, harvest rates capable of substantial reductions (>50%) in long-term population size were isolated occurrences and not maintained across sites and years. High harvest rates were observed only at low densities. Although these harvest rates may be sufficiently high to hold populations at low densities, the population is likely to escape this entrapment following a flush in food supply or a reduction in harvest effort. Implications. Our results demonstrated that, at current harvest rates, commercial harvesting is ineffective for the landscape-scale control of feral-pig populations. Unless harvest rates can be significantly increased, commercial harvesting should be used as a supplement to, rather than as a substitute for, other damage-control techniques.

Controlling Pythium in Ginger: Phase 2

The fungal disease Pythium Soft Rot is regarded by the ginger industry as their most serious disease threat. This project was developed to further investigate the factors contributing to the persistence and spread of Pythium Soft Rot on ginger farms and to identify measures for their control. The study demonstrated that the pathogen capable of causing Pythium Soft Rot in ginger was spread in contaminated ‘seed’, soil and water and that it can be managed through a combination of strategies that rely on early detection, reducing pathogen levels in soils, preventing water logging and restricting movement of contaminated ‘seed’, soil and water. However, in order to have an effective level of control, all strategies need to be integrated in an effective manner.

Increased options for controlling mikania vine (Mikania micrantha) with foliar herbicides

Mikania micrantha Kunth (mikania vine) is a highly invasive tropical weed that was first discovered in Australia in 1997, and has been the target of a nationally cost-shared weed eradication program since 2003. Field crews have been effectively treating the weed with herbicide solutions containing 1 g a.i. L−1 of fluroxypyr. During the eradication program there have been limited opportunities to test alternative foliar herbicides or rates. A newly discovered infestation provided sufficient immature vines to compare the effectiveness of eight herbicide treatments.

Non-target species interaction with sodium fluoroacetate (1080) meat bait for controlling feral pigs (Sus scrofa)

Fresh meat baits containing sodium fluoroacetate (1080) are widely used for controlling feral pigs in Queensland, but there is a potential poisoning risk to non-target species. This study investigated the non-target species interactions with meat bait by comparing the time until first approach, investigation, sample and consumption, and whether dying bait green would reduce interactions. A trial assessing species interactions with undyed bait was completed at Culgoa Floodplain National Park, Queensland. Meat baits were monitored for 79 consecutive days with camera traps. Of 40 baits, 100% were approached, 35% investigated (moved) and 25% sampled, and 25% consumed. Monitors approached (P < 0.05) and investigated (P < 0.05) the bait more rapidly than pigs or birds, but the median time until first sampling was not significantly different (P > 0.05), and did not consume any entire bait. A trial was conducted at Whetstone State Forest, southern Queensland, with green-dyed and undyed baits monitored for eight consecutive days with cameras. Of 60 baits, 92% were approached and also investigated by one or more non-target species. Most (85%) were sampled and 57% were consumed, with monitors having slightly more interaction with undyed baits than with green-dyed baits. Mean time until first approach and sample differed significantly between species groups (P = 0.038 and 0.007 respectively) with birds approaching sooner (P < 0.05) and monitors sampling later (P < 0.05) than other (unknown) species (P > 0.05). Undyed bait was sampled earlier (mean 2.19 days) than green-dyed bait (2.7 days) (P = 0.003). Data from the two trials demonstrate that many non-target species regularly visit and sample baits. The use of green-dyed baits may help reduce non-target uptake, but testing is required to determine the effect on attractiveness to feral pigs. Further research is recommended to quantify the benefits of potential strategies to reduce the non-target uptake of meat baits to help improve the availability of bait to feral pigs.

Fine root dry matter relative to mango (Mangifera indica) tree scion size grafted on size-controlling rootstocks, is negatively related to scion growth rate

Knowledge of root dry matter (DM) allocation, in relation to differing vigour conferred by rootstock cultivars, is required to understand the structural relationships between rootstock and scion. We investigated the mass of roots (four size classes up to 23 mm diameter) by coring proximal to five polyembryonic mango rootstock cultivars known to differ in their effects on the vigour and productivity of scion cultivar ‘Kensington Pride’, in a field trial of 13-year-old trees. Significant differences in fine (<0.64 and 0.64–1.88 mm diameter) and small (1.88–7.50 mm) root DM contents were observed between rootstock cultivars. There was a complex relationship between the amount of feeder (fine and small size classes) roots and scion size (trunk cross sectional area, TCSA), with intermediate size trees on rootstock MYP having the most feeder roots, while the smallest trees, on the rootstock Vellaikulamban had the least of these roots. Across rootstock cultivars, tree vigour (TCSA growth rate) was negatively and significantly related to the ratio of fine root DM/scion TCSA, suggesting this may be a useful indicator of the vigour that different rootstocks confer on the scion. In contrast non-ratio root DM and scion TCSA results had no significant relationships. The significant rootstock effects on orchard root growth and tree size could not be predicted from earlier differences in nursery seedling vigour, nor did seedling vigour predict root DM allocation.

Proportional Weirs as Velocity Controlling Devices

Of the many factors that govern the settling phenomenon, the flow velocity in the settling tanks can be controlled favorably by fixing suitably designed weirs at the outlets of the tanks. The velocity at the bottom should not dislodge the particles that have already settled. These requirements might be met with by velocities which are controlled to be constant with respect to the depth of flow, or velocities which reduce linearly with increasing depth or velocities that vary inversely with the depth. To achieve these types of velocity control, new proportional weirs have been designed. Very near to the outlet of the tank, over a small length, the flow was found to be turbulent and noncompliant with the expected type of velocity control. This small length of the disturbance may be provided over and above the theoretical settling length of the tank, for efficient sedimentation.

Fine-tuning of the signalling network controlling morphogenesis and stem cell development in teeth

Tooth development is regulated by sequential and reciprocal interactions between epithelium and mesenchyme. The molecular mechanisms underlying this regulation are conserved and most of the participating molecules belong to several signalling families. Research focusing on mouse teeth has uncovered many aspects of tooth development, including molecular and evolutionary specifi cs, and in addition offered a valuable system to analyse the regulation of epithelial stem cells. In mice the spatial and temporal regulation of cell differentiation and the mechanisms of patterning during development can be analysed both in vivo and in vitro. Follistatin (Fst), a negative regulator of TGFβ superfamily signalling, is an important inhibitor during embryonic development. We showed the necessity of modulation of TGFβ signalling by Fst in three different regulatory steps during tooth development. First we showed that tinkering with the level of TGFβ signalling by Fst may cause variation in the molar cusp patterning and crown morphogenesis. Second, our results indicated that in the continuously growing mouse incisors asymmetric expression of Fst is responsible for the labial-lingual patterning of ameloblast differentiation and enamel formation. Two TGFβ superfamily signals, BMP and Activin, are required for proper ameloblast differentiation and Fst modulates their effects. Third, we identifi ed a complex signalling network regulating the maintenance and proliferation of epithelial stem cells in the incisor, and showed that Fst is an essential modulator of this regulation. FGF3 in cooperation with FGF10 stimulates proliferation of epithelial stem cells and transit amplifying cells in the labial cervical loop. BMP4 represses Fgf3 expression whereas Activin inhibits the repressive effect of BMP4 on the labial side. Thus, Fst inhibits Activin rather than BMP4 in the cervical loop area and limits the proliferation of lingual epithelium, thereby causing the asymmetric maintenance and proliferation of epithelial stem cells. In addition, we detected Lgr5, a Wnt target gene and an epithelial stem cell marker in the intestine, in the putative epithelial stem cells of the incisor, suggesting that Lgr5 is a marker of incisor stem cells but is not regulated by Wnt/β-catenin signalling in the incisor. Thus the epithelial stem cells in the incisor may not be directly regulated by Wnt/β-catenin signalling. In conclusion, we showed in the mouse incisors that modulating the balance between inductive and inhibitory signals constitutes a key mechanism regulating the epithelial stem cells and ameloblast differentiation. Furthermore, we found additional support for the location of the putative epithelial stem cells and for the stemness of these cells. In the mouse molar we showed the necessity of fi ne-tuning the signalling in the regulation of the crown morphogenesis, and that altering the levels of an inhibitor can cause variation in the crown patterning.

Factors controlling the surface energy budget over snow and ice

Polar Regions are an energy sink of the Earth system, as the Sun rays do not reach the Poles for half of the year, and hit them only at very low angles for the other half of the year. In summer, solar radiation is the dominant energy source for the Polar areas, therefore even small changes in the surface albedo strongly affect the surface energy balance and, thus, the speed and amount of snow and ice melting. In winter, the main heat sources for the atmosphere are the cyclones approaching from lower latitudes, and the atmosphere-surface heat transfer takes place through turbulent mixing and longwave radiation, the latter dominated by clouds. The aim of this thesis is to improve the knowledge about the surface and atmospheric processes that control the surface energy budget over snow and ice, with particular focus on albedo during the spring and summer seasons, on horizontal advection of heat, cloud longwave forcing, and turbulent mixing during the winter season. The critical importance of a correct albedo representation in models is illustrated through the analysis of the causes for the errors in the surface and near-surface air temperature produced in a short-range numerical weather forecast by the HIRLAM model. Then, the daily and seasonal variability of snow and ice albedo have been examined by analysing field measurements of albedo, carried out in different environments. On the basis of the data analysis, simple albedo parameterizations have been derived, which can be implemented into thermodynamic sea ice models, as well as numerical weather prediction and climate models. Field measurements of radiation and turbulent fluxes over the Bay of Bothnia (Baltic Sea) also allowed examining the impact of a large albedo change during the melting season on surface energy and ice mass budgets. When high contrasts in surface albedo are present, as in the case of snow covered areas next to open water, the effect of the surface albedo heterogeneity on the downwelling solar irradiance under overcast condition is very significant, although it is usually not accounted for in single column radiative transfer calculations. To account for this effect, an effective albedo parameterization based on three-dimensional Monte Carlo radiative transfer calculations has been developed. To test a potentially relevant application of the effective albedo parameterization, its performance in the ground-based retrieval of cloud optical depth was illustrated. Finally, the factors causing the large variations of the surface and near-surface temperatures over the Central Arctic during winter were examined. The relative importance of cloud radiative forcing, turbulent mixing, and lateral heat advection on the Arctic surface temperature were quantified through the analysis of direct observations from Russian drifting ice stations, with the lateral heat advection calculated from reanalysis products.

An evaluation of rate-controlling obstacles for low-temperature deformation of zirconium

The low-temperature plastic flow of alpha-zirconium was studied by employing constantrate tensile tests and differential-stress creep experiments. The activation parameters, enthalpy and area, have been obtained as a function of stress for pure, as well as commercial zirconium. The activation area is independent of grain size and purity and falls to about 9b2 at high stresses. The deformation mechanism below about 700° K is found to be controlled by a single thermally activated process, and not a two-stage activation mechanism. Several dislocation mechanisms are examined and it is concluded that overcoming the Peierls energy humps by the formation of kink pairs in a length of dislocation is the rate-controlling mechanism. The total energy needed to nucleate a double kink is about 0.8 eV in pure zirconium and 1 eV in commercial zirconium

Nonlinear programming solutions for controlling the vibration pattern of stretched strings

The problem of controlling the vibration pattern of a driven string is considered. The basic question dealt with here is to find the control forces which reduce the energy of vibration of a driven string over a prescribed portion of its length while maintaining the energy outside that length above a desired value. The criterion of keeping the response outside the region of energy reduction as close to the original response as possible is introduced as an additional constraint. The slack unconstrained minimization technique (SLUMT) has been successfully applied to solve the above problem. The effect of varying the phase of the control forces (which results in a six-variable control problem) is then studied. The nonlinear programming techniques which have been effectively used to handle problems involving many variables and constraints therefore offer a powerful tool for the solution of vibration control problems.

Change detection and controlling forest information using multi-temporal Landsat TM imagery.

A method was developed for relative radiometric calibration of single multitemporal Landsat TM image, several multitemporal images covering each others, and several multitemporal images covering different geographic locations. The radiometricly calibrated difference images were used for detecting rapid changes on forest stands. The nonparametric Kernel method was applied for change detection. The accuracy of the change detection was estimated by inspecting the image analysis results in field. The change classification was applied for controlling the quality of the continuously updated forest stand information. The aim was to ensure that all the manmade changes and any forest damages were correctly updated including the attribute and stand delineation information. The image analysis results were compared with the registered treatments and the stand information base. The stands with discrepancies between these two information sources were recommended to be field inspected.