A low-cost neurostimulator with accurate pulsed-current control

A constant-current stimulator for high-impedance loads using only low-cost standard high-voltage components Is presented. A voltage-regulator powers an oscillator built across the primary of a step-up transformer whose secondary supplies, after rectification, the high voltage to a switched current-mirror in the driving stage. Adjusting the regulated voltage controls the pulsed-current intensity. A prototype produces stimulus of amplitude and pulsewidth within 0 less than or equal to I-skin less than or equal to 20 mA and 50 mus less than or equal to T-pulse less than or equal to 1 ms, respectively. Pulse-repetition spans from 1 Hz to 10 Hz. Worst case ripple is 3.7% at I-skin = 1 mA. Overall consumption is 5.6 W at I-skin = 20 mA.

A Family of Autoconnected Transformers for 12-and 18-Pulse Converters-Generalization for Delta and Wye Topologies

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Millennium development goals: advances in environmentally sustainable development in Latin America and the Caribbean

Includes bibliography

Generalization of Wye and Delta auto-connections: Analysis of voltages and currents

Multipulse rectifier topologies based on autoconnections, or differential connections, are more and more applied as interface stages between the mains and power converters. These topologies mitigate many low-order current harmonics in the utility, reducing the THD (total harmonic distortion) and increasing the power factor. This paper presents a mathematical model based on phasor diagrams, that results in a single expression able to unify all differential topologies connections (Delta and Wye), for both step-up or step-down autotransformers, for 12 and 18-pulse AC-DC converters. The proposed family of converters can be designed for any relationship between the input voltage and the load voltage. An immediate application would be the retrofit, i.e. to replace a conventional rectifier with poor quality of the processed energy by the 12 or 18 pulses rectifier with Wye or Delta-differential connection. The design procedure, simple and fast, is developed and tested for a prototype rating 6 kW and 250 V on the DC load © 2010 IEEE.

Família de retificadores multipulsos com topologias diferenciais de transformadores

Multipulse rectifier topologies based on auto-connections or differential connections, are more and more applied as interface stages between the mains and power converters. These topologies are becoming increasingly attractive not only for robustness, but to mitigate many low order current harmonics in the utility, reducing the total harmonic distortion of the line currents (THDi) and increasing the power factor requirements. Unlike isolated connections (delta-wye, zigzag, etc.), when the differential transformer is employed, most of the energy required by the load is directly conducted through the windings. Thus, only a small fraction of the kVA is processed by the magnetic core. This feature increases the power density of the converter. This paper presents a mathematical model based on phasor diagrams, which results in a single expression able to merge all differential connections (wye and delta), for both step-up and step-down rectifiers for 12 or 18 pulses. The proposed family of converters can be designed for any relationship between the line input voltage and the DC voltage, unlike the conventional phase-shift voltage connections. An immediate application would be the retrofit, i.e. to replace a conventional rectifier with poor quality of the processed energy by the 12 or 18-pulse rectifiers with Wye or Delta-differential connections, keeping the original values for the input and load voltages. The simple and fast design procedure is developed and tested for a prototype rating 6 kW and 400 V on DC load.

Micro-inverter for integrated grid-tie PV module using resonant controller

Two-stage isolated converters for photovoltaic (PV) applications commonly employ a high-frequency transformer on the DC-DC side, submitting the DC-AC inverter switches to high voltages and forcing the use of IGBTs instead of low-voltage and low-loss MOSFETs. This paper shows the modeling, control and simulation of a single-phase full-bridge inverter with high-frequency transformer (HFT) that can be used as part of a two-stage converter with transformerless DC-DC side or as a single-stage converter (simple DC-AC inverter) for grid-connected PV applications. The inverter is modeled in order to obtain a small-signal transfer function used to design the PResonant current control regulator. A high-frequency step-up transformer results in reduced voltage switches and better efficiency compared with converters in which the transformer is used on the DC-DC side. Simulations and experimental results with a 200 W prototype are shown. © 2012 IEEE.

Efficiency analysis of an isolated high voltage gain converter operating in resonant and non-resonant mode

This paper presents an efficiency investigation of an isolated high step-up ratio dc-dc converter aimed to be used for energy processing from low-voltage high-current energy sources, like batteries, photovoltaic modules or fuel-cells. The considered converter consists of an interleaved active clamp flyback topology combined with a voltage multiplier at the transformer secondary side capable of two different operating modes, i.e. resonant and non-resonant according to the design of the output capacitors. The main goal of this paper is to compare these two operating modes from the component losses point of view with the aim of maximize the overall converter efficiency. The approach is based on losses prediction using steady-state theoretical models (designed in Mathcad environment), taking into account both conduction and switching losses. The models are compared with steady-state simulations and experimental results considering different operating modes to validate the approach. © 2012 IEEE.

Fault current limiter using transformer and modular device of YBCO coated conductor

In this work, we report on the evaluation of a superconducting fault current limiter (SFCL). It is consisted of a modular superconducting device combined with a short-circuited transformer with a primary copper winding connected in series to the power line and the secondary side short-circuited by the superconducting device. The basic idea is adding a magnetic component to contribute to the current limitation by the impedance reflected to the line after transition of the superconducting device. The evaluation tests were performed with a prospective current up to 2 kA, with the short-circuited transformer of 2.5 kVA, 220 V/660 V connected to a test facility of 100 kVA power capacity. The resistive SFCL using a modular superconducting device was tested without degradation for a prospective fault current of 1.8 kA, achieving the limiting factor 2.78; the voltage achieved 282 V corresponding to an electric field of 11 V/m. The test performed with the combined SFCL (xsuperconducting device + transformer) using series and toroidal transformers showed current limiting factor of 3.1 and 2 times, respectively. The test results of the combined SFCL with short-circuited transformer showed undesirable influence of the transformer impedance, resulting in reduction of the fault current level. © 2002-2011 IEEE.

Uma nova metodologia de projeto e controle para o inversor Boost (CSI) monofásico, para o aproveitamento de fontes alternativas e renováveis de energia elétrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise e modelação de perdas em conversores CC-CC do tipo Boost entrelaçados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comportamento ingestivo de bovinos Nelore confinados adaptados com diferentes protocolos à dieta de alto concentrado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Protocolos de adaptação a rações de alto teor de concentrados para bovinos nelore confinados

Pós-graduação em Zootecnia - FMVZ

Latin America and the Caribbean in the World Economy: 2005 Trends

The study recently published by the Division of International Trade and Integration of ECLAC considers that 2005 will be a good year for trade in the countries of the region. Despite a favourable international context, there are still serious problems of competitiveness. The region needs to increase productivity, promote technological innovation and take a proactive part in worldwide networks. The conclusions of the study include the need to update integration; to take a strategic view of the links to be constructed with China and the countries of the Pacific; to manage free-trade agreements so as to increase and diversify exports; to step up the pace of work and improve coordination with the developing countries on the Doha Round, and to gradually incorporate the demands of security into competitiveness policies, ensuring that they do not become protectionist barriers (traceability, food safety and maritime and port security).

Capital Flows to Latin America and the Caribbean: Recent Developments

For six years, the global economy has been driven by the U.S. Federal Reserve’s policies of easy money. Liquidity has flowed from developed to developing economies, financing infrastructure and corporate investment and allowing consumers to indulge in credit-fuelled retail spending. Thus the effective ending of the Fed’s third round of asset purchases (QE3) at the end of October represents both a watershed and the beginning of a new stage in the world economy. The end of asset-purchases comes at a challenging time for emerging markets, with China’s economy slowing, the Euro zone struggling to avoid a recession and the Japanese economy already in recession. The unwinding of the U.S. monetary stimulus, while the European Central Bank and the Bank of Japan step up their monetary stimulus, has underpinned an appreciation by the U.S. dollar, in which most commodities are priced. An appreciated dollar makes dollar-denominated commodities more expensive to buyers, thereby creating pressure for sellers to lower their prices. Latin American markets ended the third quarter of 2014 under pressure from a stronger U.S. dollar. In this changing external context, there are many signs that a slowdown in Latin American and Caribbean (LAC) financial markets, particularly debt markets, which have been breaking issuance records for the past six years, may slowdown from now on. Commodity prices – including those of oil, base metals and some goods – are in a prolonged slump. The Bloomberg commodity price index, a benchmark of commodity investments, has fallen to a five-year low as China’s economy slows down, and with it the demand for commodities. Investment into the LAC region has decelerated, in large part because of a deceleration of mining investments. Latin American currencies have suffered depreciations, as current account deficits have widening for a number of countries. And LAC companies, having issued record amounts of foreign currency bonds may now struggle to service their debt. In October, credit-rating agency Moody’s downgraded the bonds of Brazil’s Petrobras to tow notches above speculative grade because of the impact of falling oil prices and the weaker real on its debt. Growth prospects look brighter in 2015 relative to 2014, but a strengthening U.S. dollar, uneven global growth and weakness in commodity prices are skewing the risk toward the downside for the 2015 forecasts across the region. The Institute of International Finance expects the strengthening of the dollar to have a divergent impact across the region, however, depending on trade and financial linkages. The Institute of International Finance, Capital Flows to Emerging Markets, October 2, 2014. A stronger dollar lifts U.S. purchasing power, supporting exports, growth and capital inflows in countries with close trade links to the U.S. economy. However, rising dollar financing costs will increase pressure on countries with weak external positions. Given the effects of falling oil prices and a stronger dollar, some companies in the region, having issued record amounts of foreign currency bonds, may now struggle to service their debts. Prospects of Fed rate hikes resulting in tighter global liquidity amid the rapid rise in the corporate external bond stock has indeed raised concerns over some companies. However, there is still a shortage of bonds at a global level and the region still enjoys good economic policy management for the most part, so LAC debt markets may continue to enjoy momentum despite occasional bursts of high volatility – even if not at the record levels of recent years.

Capital Flows to Latin America and the Caribbean: 2014 Overview

Divergence in macro trends and in monetary policy in advanced economies was a dominant driver of rates and currencies in emerging markets in 2014. Diverging macroeconomic developments were reflected in different monetary policy actions in 2014, with the European Central Bank (ECB) and the Bank of Japan (BOJ) moving in the opposite direction of the U.S. Federal Reserve. The unwinding of the U.S. monetary stimulus, while the ECB and the BOJ step up their monetary stimulus, has underpinned an appreciation by the U.S. dollar, in which most commodities are priced. Latin American markets, which started the year under pressure from fears of the U.S. Federal Reserve tapering off its quantitative easing program and concerns over stability, ended 2014 under pressure from a stronger U.S. dollar. However, there are many signs that a slowdown in LAC financial markets – particularly debt markets, which have been breaking records in debt issuance for the past six years – is under way. The region’s growth prospects look somewhat brighter in 2015 relative to 2014, but a strengthening U.S. dollar, uneven global growth and weakness in commodity prices are skewing the risk toward the downside for the 2015 forecasts across the region.