Desarrollo de servicios de distribución de contenidos multimedia en redes corporativas con tecnología SDN

En la actualidad, es ampliamente conocido que uno de los principales desafíos que enfrentan las organizaciones es el crecimiento de Internet, tanto en número de clientes como en tráfico multimedia. Una red de entrega de contenidos (CDN, Content Delivery Network) es una opción para mejorar la experiencia de los usuarios finales, es decir, hacer más eficiente y fiable la distribución de contenidos. Sin embargo, con los nuevos requisitos de negocio y tecnologías, los operadores de CDN tienen que mejorar la arquitectura de la red. La Red definida por software (SDN, Software Defined Networking) es una nueva arquitectura de la red con un gran potencial, y el aspecto principal es la separación de los planos de datos y de control. El objetivo de este trabajo fin de grado es proporcionar una arquitectura basada en la tecnología SDN para poder sustituir la parte de la redirección DNS en una red CDN

Orchestration of energy efficiency capabilities for a sustainable network management

The energy demand for operating Information and Communication Technology (ICT) systems has been growing, implying in high operational costs and consequent increase of carbon emissions. Both in datacenters and telecom infrastructures, the networks represent a significant amount of energy spending. Given that, there is an increased demand for energy eficiency solutions, and several capabilities to save energy have been proposed. However, it is very dificult to orchestrate such energy eficiency capabilities, i.e., coordinate or combine them in the same network, ensuring a conflict-free operation and choosing the best one for a given scenario, ensuring that a capability not suited to the current bandwidth utilization will not be applied and lead to congestion or packet loss. Also, there is no way in the literature to do this taking business directives into account. In this regard, a method able to orchestrate diferent energy eficiency capabilities is proposed considering the possible combinations and conflicts among them, as well as the best option for a given bandwidth utilization and network characteristics. In the proposed method, the business policies specified in a high-level interface are refined down to the network level in order to bring highlevel directives into the operation, and a Utility Function is used to combine energy eficiency and performance requirements. A Decision Tree able to determine what to do in each scenario is deployed in a Software Defined Network environment. The proposed method was validated with diferent experiments, testing the Utility Function, checking the extra savings when combining several capabilities, the decision tree interpolation and dynamicity aspects. The orchestration proved to be valid to solve the problem of finding the best combination for a given scenario, achieving additional savings due to the combination, besides ensuring a conflict-free operation.

Layer 2.5 Network Coding to Improve 802.11 Network Efficiency

Thesis (Master's)--University of Washington, 2016-06

Computer-aided System of Semantic Text Analysis of a Technical Specification

The given work is devoted to development of the computer-aided system of semantic text analysis of a technical specification. The purpose of this work is to increase efficiency of software engineering based on automation of semantic text analysis of a technical specification. In work it is offered and investigated the model of the analysis of the text of the technical project is submitted, the attribute grammar of a technical specification, intended for formalization of limited Russian is constructed with the purpose of analysis of offers of text of a technical specification, style features of the technical project as class of documents are considered, recommendations on preparation of text of a technical specification for the automated processing are formulated. The computer-aided system of semantic text analysis of a technical specification is considered. This system consists of the following subsystems: preliminary text processing, the syntactic and semantic analysis and construction of software models, storage of documents and interface.

The Future of the Next-Generation Internet and Possible Applications into Education and Culture Heritage

There are several initiatives such as: US Ignite, Software Defined Networking (SDN), OpenFlow, Global Environment for Network Innovation (GENI), WiMAX and Internet 2 dealing with the future of the internet. The goal of the paper is to understand the goals, intricacies, and nuances of some of these techniques and show some of the possibilities of next-generation high-speed networking and their applications into education and culture heritage.

Lightweight middleware for SDR inter-components communication

The ability to use Software Defined Radio (SDR) in the civilian mobile applications will make it possible for the next generation of mobile devices to handle multi-standard personal wireless devices and ubiquitous wireless devices. The original military standard created many beneficial characteristics for SDR, but resulted in a number of disadvantages as well. Many challenges in commercializing SDR are still the subject of interest in the software radio research community. Four main issues that have been already addressed are performance, size, weight, and power. ^ This investigation presents an in-depth study of SDR inter-components communications in terms of total link delay related to the number of components and packet sizes in systems based on Software Communication Architecture (SCA). The study is based on the investigation of the controlled environment platform. Results suggest that the total link delay does not linearly increase with the number of components and the packet sizes. The closed form expression of the delay was modeled using a logistic function in terms of the number of components and packet sizes. The model performed well when the number of components was large. ^ Based upon the mobility applications, energy consumption has become one of the most crucial limitations. SDR will not only provide flexibility of multi-protocol support, but this desirable feature will also bring a choice of mobile protocols. Having such a variety of choices available creates a problem in the selection of the most appropriate protocol to transmit. An investigation in a real-time algorithm to optimize energy efficiency was also performed. Communication energy models were used including switching estimation to develop a waveform selection algorithm. Simulations were performed to validate the concept.^

Peak -to -average power ratio reduced parallel interference cancellation Multicarrier-Code Division Multiple Access system with anti -interference property

Orthogonal Frequency-Division Multiplexing (OFDM) has been proved to be a promising technology that enables the transmission of higher data rate. Multicarrier Code-Division Multiple Access (MC-CDMA) is a transmission technique which combines the advantages of both OFDM and Code-Division Multiplexing Access (CDMA), so as to allow high transmission rates over severe time-dispersive multi-path channels without the need of a complex receiver implementation. Also MC-CDMA exploits frequency diversity via the different subcarriers, and therefore allows the high code rates systems to achieve good Bit Error Rate (BER) performances. Furthermore, the spreading in the frequency domain makes the time synchronization requirement much lower than traditional direct sequence CDMA schemes. There are still some problems when we use MC-CDMA. One is the high Peak-to-Average Power Ratio (PAPR) of the transmit signal. High PAPR leads to nonlinear distortion of the amplifier and results in inter-carrier self-interference plus out-of-band radiation. On the other hand, suppressing the Multiple Access Interference (MAI) is another crucial problem in the MC-CDMA system. Imperfect cross-correlation characteristics of the spreading codes and the multipath fading destroy the orthogonality among the users, and then cause MAI, which produces serious BER degradation in the system. Moreover, in uplink system the received signals at a base station are always asynchronous. This also destroys the orthogonality among the users, and hence, generates MAI which degrades the system performance. Besides those two problems, the interference should always be considered seriously for any communication system. In this dissertation, we design a novel MC-CDMA system, which has low PAPR and mitigated MAI. The new Semi-blind channel estimation and multi-user data detection based on Parallel Interference Cancellation (PIC) have been applied in the system. The Low Density Parity Codes (LDPC) has also been introduced into the system to improve the performance. Different interference models are analyzed in multi-carrier communication systems and then the effective interference suppression for MC-CDMA systems is employed in this dissertation. The experimental results indicate that our system not only significantly reduces the PAPR and MAI but also effectively suppresses the outside interference with low complexity. Finally, we present a practical cognitive application of the proposed system over the software defined radio platform.

Peak-to-Average Power Ratio Reduced Parallel Interference Cancellation Multicarrier-Code Division Multiple Access System with Anti-Interference Property

Orthogonal Frequency-Division Multiplexing (OFDM) has been proved to be a promising technology that enables the transmission of higher data rate. Multicarrier Code-Division Multiple Access (MC-CDMA) is a transmission technique which combines the advantages of both OFDM and Code-Division Multiplexing Access (CDMA), so as to allow high transmission rates over severe time-dispersive multi-path channels without the need of a complex receiver implementation. Also MC-CDMA exploits frequency diversity via the different subcarriers, and therefore allows the high code rates systems to achieve good Bit Error Rate (BER) performances. Furthermore, the spreading in the frequency domain makes the time synchronization requirement much lower than traditional direct sequence CDMA schemes. There are still some problems when we use MC-CDMA. One is the high Peak-to-Average Power Ratio (PAPR) of the transmit signal. High PAPR leads to nonlinear distortion of the amplifier and results in inter-carrier self-interference plus out-of-band radiation. On the other hand, suppressing the Multiple Access Interference (MAI) is another crucial problem in the MC-CDMA system. Imperfect cross-correlation characteristics of the spreading codes and the multipath fading destroy the orthogonality among the users, and then cause MAI, which produces serious BER degradation in the system. Moreover, in uplink system the received signals at a base station are always asynchronous. This also destroys the orthogonality among the users, and hence, generates MAI which degrades the system performance. Besides those two problems, the interference should always be considered seriously for any communication system. In this dissertation, we design a novel MC-CDMA system, which has low PAPR and mitigated MAI. The new Semi-blind channel estimation and multi-user data detection based on Parallel Interference Cancellation (PIC) have been applied in the system. The Low Density Parity Codes (LDPC) has also been introduced into the system to improve the performance. Different interference models are analyzed in multi-carrier communication systems and then the effective interference suppression for MC-CDMA systems is employed in this dissertation. The experimental results indicate that our system not only significantly reduces the PAPR and MAI but also effectively suppresses the outside interference with low complexity. Finally, we present a practical cognitive application of the proposed system over the software defined radio platform.

Alternative per la configurazione dell'infrastruttura di rete in piattaforme Openstack

In questo scritto si analizzeranno alcune alternative nella configurazione di rete della piattaforma di cloud computing open source OpenStack. Verrà mostrata un’ installazione in ambiente di laboratorio di un cluster completo basato sulla release Liberty di Openstack, per poi modificarne la componente dedicata al Networking in modo da sfruttare diversi plugin e diversi protocolli. Si osserverà il traffico generato all’interno e verso l’esterno del sistema Openstack in modo da avere un quadro generale del comportamento dell’infrastruttura.

Extensões na arquitetura SDN para o provisionamento de QoS através do monitoramento e uso de múltiplos caminhos

The substantial increase in the number of applications offered through the computer networks, as well as in the volume of traffic forwarded through the network, have hampered to assure adequate service level to users. The Quality of Service (QoS) offer, honoring specified parameters in Service Level Agreements (SLA), established between the service providers and their clients, composes a traditional and extensive computer networks’ research area. Several schemes proposals for the provision of QoS were presented in the last three decades, but the acting scope of these proposals is always limited due to some factors, including the limited development of the network hardware and software, generally belonging to a single manufacturer. The advent of Software Defined Networking (SDN), along with the maturation of its main materialization, the OpenFlow protocol, allowed the decoupling between network hardware and software, through an architecture which provides a control plane and a data plane. This eases the computer networks scenario, allowing that new abstractions are applied in the hardware composing the data plane, through the development of new software pieces which are executed in the control plane. This dissertation investigates the QoS offer through the use and extension of the SDN architecture. Based on the proposal of two new modules, one to perform the data plane monitoring, SDNMon, and the second, MP-ROUTING, developed to determine the use of multiple paths in the forwarding of data referring to a flow, we demonstrated in this work that some QoS metrics specified in the SLAs, such as bandwidth, can be honored. Both modules were implemented and evaluated through a prototype. The evaluation results referring to several aspects of both proposed modules are presented in this dissertation, showing the obtained accuracy of the monitoring module SDNMon and the QoS gains due to the utilization of multiple paths defined by the MP-Routing, when forwarding data flow through the SDN.

Greenow: um algoritmo de roteamento orientado a workspace para uma arquitetura de Internet do futuro

Current and future applications pose new requirements that Internet architecture is not able to satisfy, like Mobility, Multicast, Multihoming, Bandwidth Guarantee and so on. The Internet architecture has some limitations which do not allow all future requirements to be covered. New architectures were proposed considering these requirements when a communication is established. ETArch (Entity Title Architecture) is a new Internet architecture, clean slate, able to use application’s requirements on each communication, and flexible to work with several layers. The Routing has an important role on Internet, because it decides the best way to forward primitives through the network. In Future Internet, all requirements depend on the routing. Routing is responsible for deciding the best path and, in the future, a better route can consider Mobility aspects or Energy Consumption, for instance. In the dawn of ETArch, the Routing has not been defined. This work provides intra and inter-domain routing algorithms to be used in the ETArch. It is considered that the route should be defined completely before the data start to traffic, to ensure that the requirements are met. In the Internet, the Routing has two distinct functions: (i) run specific algorithms to define the best route; and (ii) to forward data primitives to the correct link. In traditional Internet architecture, the two Routing functions are performed in all routers everytime that a packet arrives. This work allows that the complete route is defined before the communication starts, like in the telecommunication systems. This work determined the Routing for ETArch and experiments were performed to demonstrate the control plane routing viability. The initial setup before a communication takes longer, then only forwarding of primitives is performed, saving processing time.

Diseño e implementación de una herramienta de visualización para análisis en tiempo real de redes SDN/OpenFlow

Las Redes Definidas por Software (Software Defined Networking) permiten la monitorización y el control centralizado de la red, de forma que los administradores pueden tener una visión real y completa de la misma. El análisis y visualización de los diferentes parámetros obtenidos representan la forma más viable y práctica de programar la red en función de las necesidades del usuario. Por este motivo, en este proyecto se desarrolla una arquitectura modular cuyo objetivo es presentar en tiempo real la información que se monitoriza en una red SDN. En primera instancia, las diferentes métricas monitorizadas (error, retardo y tasa de datos) son almacenadas en una base de datos, para que en una etapa posterior se realice el análisis de dichas métricas. Finalmente, los resultados obtenidos, tanto de métricas en tiempo real como de los datos estadísticos, son presentados en una aplicación web. La información es obtenida a través de la interfaz REST que expone el controlador Floodlight y para el análisis de la información se plantea una comparación entre los valores medios y máximos del conjunto de datos. Los resultados obtenidos muestran gráficamente de forma clara y precisa las diferentes métricas de monitorización. Además, debido al carácter modular de la arquitectura, se ofrece un valor añadido a los sistemas actuales de monitorización SDN.

SDN enabled dynamically reconfigurable high capacity optical access architecture for converged services

Dynamically reconfigurable time-division multiplexing (TDM) dense wavelength division multiplexing (DWDM) long-reach passive optical networks (PONs) can support the reduction of nodes and network interfaces by enabling a fully meshed flat optical core. In this paper we demonstrate the flexibility of the TDM-DWDM PON architecture, which can enable the convergence of multiple service types on a single physical layer. Heterogeneous services and modulation formats, i.e. residential 10G PON channels, business 100G dedicated channel and wireless fronthaul, are demonstrated co-existing on the same long reach TDM-DWDM PON system, with up to 100km reach, 512 users and emulated system load of 40 channels, employing amplifier nodes with either erbium doped fiber amplifiers (EDFAs) or semiconductor optical amplifiers (SOAs). For the first time end-to-end software defined networking (SDN) management of the access and core network elements is also implemented and integrated with the PON physical layer in order to demonstrate two service use cases: a fast protection mechanism with end-to-end service restoration in the case of a primary link failure; and dynamic wavelength allocation (DWA) in response to an increased traffic demand.