Self-assembly of sensory neurons into ganglia-like microtissues

Unraveling intra- and inter-cellular signaling networks managing cell-fate control, coordinating complex differentiation regulatory circuits and shaping tissues and organs in living systems remain major challenges in the post-genomic era. Resting on the laurels of past-century monolayer culture technologies, the cell culture community has only recently begun to appreciate the potential of three-dimensional mammalian cell culture systems to reveal the full scope of mechanisms orchestrating the tissue-like cell quorum in space and time. Capitalizing on gravity-enforced self-assembly of monodispersed primary embryonic mouse cells in hanging drops, we designed and characterized a three-dimensional cell culture model for ganglion-like structures. Within 24h, a mixture of mouse embryonic fibroblasts (MEF) and cells, derived from the dorsal root ganglion (DRG) (sensory neurons and Schwann cells) grown in hanging drops, assembled to coherent spherical microtissues characterized by a MEF feeder core and a peripheral layer of DRG-derived cells. In a time-dependent manner, sensory neurons formed a polar ganglion-like cap structure, which coordinated guided axonal outgrowth and innervation of the distal pole of the MEF feeder spheroid. Schwann cells, present in embryonic DRG isolates, tended to align along axonal structures and myelinate them in an in vivo-like manner. Whenever cultivation exceeded 10 days, DRG:MEF-based microtissues disintegrated due to an as yet unknown mechanism. Using a transgenic MEF feeder spheroid, engineered for gaseous acetaldehyde-inducible interferon-beta (ifn-beta) production by cotransduction of retro-/ lenti-viral particles, a short 6-h ifn-beta induction was sufficient to rescue the integrity of DRG:MEF spheroids and enable long-term cultivation of these microtissues. In hanging drops, such microtissues fused to higher-order macrotissue-like structures, which may pave the way for sophisticated bottom-up tissue engineering strategies. DRG:MEF-based artificial micro- and macrotissue design demonstrated accurate key morphological aspects of ganglions and exemplified the potential of self-assembled scaffold-free multicellular micro-/macrotissues to provide new insight into organogenesis.

The nitrate-afterripening crosstalk is involved in the testa rupture of sisymbryum offinales seed

The loss of seed dormancy can occur by exposing the seed at low moisture storage conditions (afterripening; AR). Since a positive GA:ABA ratio play a key role in the reactivation of germination of non-dormant seeds, it seems obvious that a remarkable effect of AR is the decreasing of both ABA levels and sensitivity, as well as the increment of GA synthesis and sensitivity. ABA levels are regulated by control both of its biosynthesis thorough the 9-cis-epoxycarotenoid dioxygenase (NCED) encoding genes and its catabolism mediated mainly by ABA-8¿-hydroxylases (CYP707A). On the other hand, the last steps of the GA biosynthesis pathway should be involved to control its levels. Namely, GA20ox and GA3ox catalyzing the biosynthesis of active GA and GA2ox which catalyzes the GA inactivation. The presence of nitrate accelerates the sensu stricto germination of non-AR S. officinale seeds. Here, we demonstrate that in AR seeds nitrate also alters the expression pattern of key genes involved in ABA and GA metabolism and signalling (i.e. SoNCED6, SoNCED9, SoCYP707A2, SoABI5, SoGA3ox2, SoGA20ox6, SoGA2ox6 and SoRGL2). These results suggest that the nitrate signalling is also operative during imbibition of AR S. officinale seeds.

Estudio preliminar acerca del uso de protocolos y actos comunicativos FIPA en el sistema COMPUTAPLEX

Este trabajo corresponde con la implementación de componentes software dentro de la Plataforma COMPUTAPLEX, la cual tiene como objetivo facilitar a los investigadores la realización de tareas del proceso experimental de ingeniería de software. Uno de los aportes a esta plataforma tecnológica corresponde con el desarrolló de los componentes necesarios para la recuperación de datos experimentales disponibles en diversas fuentes de datos, para ello se hizo uso de un mecanismo capaz de unificar la extracción de información de MySQL, ficheros excel y ficheros SPSS. Con ello diferentes grupos de investigación asociados pueden compartir y tener acceso a repositorios experimentales que se mantienen tanto de manera local como externa. Por otra parte, se ha realizado un estudio de la tecnología de agentes en la que se describe sus definiciones, lenguajes de comunicación, especificación FIPA, JADE como implementación FIPA y parser XML. Además para este trabajo se ha definido e implementado una ontología de comunicación entre agentes, la misma que fue diseñada en la herramienta Protégé. En lo que se refiere al desarrollo de componentes se hizo uso de una amplía variedad de tecnologías que incluye lenguaje de programación Java, framework JADE para el desarrollo de agentes, librería JENA para manejo de ontologías, librería SAXParser para lectura de archivos XML y patrón de diseño Factory. Finalmente se describe la metodología de trabajo utilizada en el proyecto, la cual por medio de la realización de varios ciclos iterativos permitió obtener prototipos que poco a poco fueron cubriendo las necesidades del producto software.----ABSTRACT---- This work relates to the implementation of software components within the platform Computaplex, which aims to enable researchers to conduct experimental software engineering process tasks. One of the contributions to this platform technology corresponds to the development of components which are necessary for the recovery of experimental data available in different data sources, to archive this goal a mechanism able to unify the extraction of information from MySQL, Excel and SPSS files was made. Therefore, associated research groups can share and access experimental repositories that remain both locally and externally. Moreover, it has been conducted a study of agent technology in its definition is described, languages communication, FIPA, JADE and FIPA implementation and XML parser. In addition to this work, it has been defined and implemented an ontology for communication between agents, the same as was designed in the Protégé tool. In what refers to the development of components, a wide range of technologies have been made which includes Java programming language, framework JADE for agent development, JENA library for handling ontologies, SAXParser for reading XML files and Factory design pattern. Finally, describing the work methodology used in this project, which through the implementation of several iterative cycles allowed to obtain prototypes were gradually meeting the needs of the software product.

Gestión de ideas innovadoras

El trabajo de fin de grado que se va a definir detalladamente en esta memoria, trata de poner de manifiesto muchos de los conocimientos que he adquirido a lo largo de la carrera, aplicándolos en un proyecto real. Se ha desarrollado una plataforma capaz de albergar ideas, escritas por personas de todo el mundo que buscan compartirlas con los demás, para que estas sean comentadas, valoradas y entre todos poder mejorarlas. Estas ideas pueden ser de cualquier ámbito, por tanto, se da la posibilidad de clasificarlas en las categorías que mejor encajen con la idea. La aplicación ofrece una API RESTful muy descriptiva, en la que se ha identificado y estructurado cada recurso, para que a través de los “verbos http” se puedan gestionar todos los elementos de una forma fácil y sencilla, independientemente del cliente que la utilice. La arquitectura está montada siguiendo el patrón de diseño modelo vista-controlador, utilizando las últimas tecnologías del mercado como Spring, Liferay, SmartGWT y MongoDB (entre muchas otras) con el objetivo de crear una aplicación segura, escalable y modulada, por lo que se ha tenido que integrar todos estos frameworks. Los datos de la aplicación se hacen persistentes en dos tipos de bases de datos, una relacional (MySQL) y otra no relacional (MongoDB), aprovechando al máximo las características que ofrecen cada una de ellas. El cliente propuesto es accesible mediante un navegador web, se basa en el portal de Liferay. Se han desarrollado varios “Portlets o Widgets”, que componen la estructura de contenido que ve el usuario final. A través de ellos se puede acceder al contenido de la aplicación, ideas, comentarios y demás contenidos sociales, de una forma agradable para el usuario, ya que estos “Portlets” se comunican entre sí y hacen peticiones asíncronas a la API RESTful sin necesidad de recargar toda la estructura de la página. Además, los usuarios pueden registrarse en el sistema para aportar más contenidos u obtener roles que les dan permisos para realizar acciones de administración. Se ha seguido una metodología “Scrum” para la realización del proyecto, con el objetivo de dividir el proyecto en tareas pequeñas y desarrollarlas de una forma ágil. Herramientas como “Jenkins” me han ayudado a una integración continua y asegurando mediante la ejecución de los test de prueba, que todos los componentes funcionan. La calidad ha sido un aspecto principal en el proyecto, se han seguido metodologías software y patrones de diseño para garantizar un diseño de calidad, reutilizable, óptimo y modulado. El uso de la herramienta “Sonar” ha ayudado a este cometido. Además, se ha implementado un sistema de pruebas muy completo de todos los componentes de la aplicación. En definitiva, se ha diseñado una aplicación innovadora de código abierto, que establece unas bases muy definidas para que si algún día se pone en producción, sirva a las personas para compartir pensamientos o ideas ayudando a mejorar el mundo en el que vivimos. ---ABSTRACT---The Final Degree Project, described in detail in this report, attempts to cover a lot of the knowledge I have acquired during my studies, applying it to a real project. The objective of the project has been to develop a platform capable of hosting ideas from people all over the world, where users can share their ideas, comment on and rate the ideas of others and together help improving them. Since these ideas can be of any kind, it is possible to classify them into suitable categories. The application offers a very descriptive API RESTful, where each resource has been identified and organized in a way that makes it possible to easily manage all the elements using the HTTP verbs, regardless of the client using it. The architecture has been built following the design pattern model-view-controller, using the latest market technologies such as Spring, Liferay, Smart GWT and MongoDB (among others) with the purpose of creating a safe, scalable and adjustable application. The data of the application are persistent in two different kinds of databases, one relational (MySQL) and the other non-relational (MongoDB), taking advantage of all the different features each one of them provides. The suggested client is accessible through a web browser and it is based in Liferay. Various “Portlets" or "Widgets” make up the final content of the page. Thanks to these Portlets, the user can access the application content (ideas, comments and categories) in a pleasant way as the Portlets communicate with each other making asynchronous requests to the API RESTful without the necessity to refresh the whole page. Furthermore, users can log on to the system to contribute with more contents or to obtain administrator privileges. The Project has been developed following a “Scrum” methodology, with the main objective being that of dividing the Project into smaller tasks making it possible to develop each task in a more agile and ultimately faster way. Tools like “Jenkins” have been used to guarantee a continuous integration and to ensure that all the components work correctly thanks to the execution of test runs. Quality has been one of the main aspects in this project, why design patterns and software methodologies have been used to guarantee a high quality, reusable, modular and optimized design. The “Sonar” technology has helped in the achievement of this goal. Furthermore, a comprehensive proofing system of all the application's components has been implemented. In conclusion, this Project has consisted in developing an innovative, free source application that establishes a clearly defined basis so that, if it someday will be put in production, it will allow people to share thoughts and ideas, and by doing so, help them to improve the World we live in.

Acquisition and management of technology in Malaysian companies

This thesis is about the acquisition and diffusion of imported technology. Writers in the field of technology development in developing countries have always recognised that technical progress depends on the diffusion of imported technology and its applications to the provision of products and processes (Rosemberg, 1982). Despite the massive importation of technology by Malaysian companies, little effort has been made to study and understand the diffusion system in local companies. This study analyses: The problems associated with the acquisition of technology, highlighting the technology strategies adopted by the suppliers of technology; the diffusion pattern and key characteristics of the diffusion process; and major factors affecting the diffusion of technology. The policy implications are examined and the framework to manage the diffusion process within the enterprises is suggested. The findings indicated that the diffusion process is not one of passive acceptance but involves systematic efforts to acquire and diffuse the imported technology. A strong system of diffusion in companies had enabled a rapid diffusion of imported technology resulting in higher levels of technical capability. On the other hand, weakness in the company's diffusion system led to limited diffusion and slow technical progress. Characteristics of diffusion system are analysed and discussed extensively. The thesis attempts to develop the idea of `in-house system of diffusion' associated with the acquisition and development of imported technology. It argues for the development ofa stronger theoretical framework on the diffusion and development of technology particularly in countries like Malaysia which relies extensively on the importation of foreign technology.

KEMNAD:a knowledge engineering methodology for negotiating agent development

Automated negotiation is widely applied in various domains. However, the development of such systems is a complex knowledge and software engineering task. So, a methodology there will be helpful. Unfortunately, none of existing methodologies can offer sufficient, detailed support for such system development. To remove this limitation, this paper develops a new methodology made up of: (1) a generic framework (architectural pattern) for the main task, and (2) a library of modular and reusable design pattern (templates) of subtasks. Thus, it is much easier to build a negotiating agent by assembling these standardised components rather than reinventing the wheel each time. Moreover, since these patterns are identified from a wide variety of existing negotiating agents (especially high impact ones), they can also improve the quality of the final systems developed. In addition, our methodology reveals what types of domain knowledge need to be input into the negotiating agents. This in turn provides a basis for developing techniques to acquire the domain knowledge from human users. This is important because negotiation agents act faithfully on the behalf of their human users and thus the relevant domain knowledge must be acquired from the human users. Finally, our methodology is validated with one high impact system.

A green perspective on Structured parallel programming

Structured parallel programming, and in particular programming models using the algorithmic skeleton or parallel design pattern concepts, are increasingly considered to be the only viable means of supporting effective development of scalable and efficient parallel programs. Structured parallel programming models have been assessed in a number of works in the context of performance. In this paper we consider how the use of structured parallel programming models allows knowledge of the parallel patterns present to be harnessed to address both performance and energy consumption. We consider different features of structured parallel programming that may be leveraged to impact the performance/energy trade-off and we discuss a preliminary set of experiments validating our claims.

Garbage collection optimization for non uniform memory access architectures

Cache-coherent non uniform memory access (ccNUMA) architecture is a standard design pattern for contemporary multicore processors, and future generations of architectures are likely to be NUMA. NUMA architectures create new challenges for managed runtime systems. Memory-intensive applications use the system’s distributed memory banks to allocate data, and the automatic memory manager collects garbage left in these memory banks. The garbage collector may need to access remote memory banks, which entails access latency overhead and potential bandwidth saturation for the interconnection between memory banks. This dissertation makes five significant contributions to garbage collection on NUMA systems, with a case study implementation using the Hotspot Java Virtual Machine. It empirically studies data locality for a Stop-The-World garbage collector when tracing connected objects in NUMA heaps. First, it identifies a locality richness which exists naturally in connected objects that contain a root object and its reachable set— ‘rooted sub-graphs’. Second, this dissertation leverages the locality characteristic of rooted sub-graphs to develop a new NUMA-aware garbage collection mechanism. A garbage collector thread processes a local root and its reachable set, which is likely to have a large number of objects in the same NUMA node. Third, a garbage collector thread steals references from sibling threads that run on the same NUMA node to improve data locality. This research evaluates the new NUMA-aware garbage collector using seven benchmarks of an established real-world DaCapo benchmark suite. In addition, evaluation involves a widely used SPECjbb benchmark and Neo4J graph database Java benchmark, as well as an artificial benchmark. The results of the NUMA-aware garbage collector on a multi-hop NUMA architecture show an average of 15% performance improvement. Furthermore, this performance gain is shown to be as a result of an improved NUMA memory access in a ccNUMA system. Fourth, the existing Hotspot JVM adaptive policy for configuring the number of garbage collection threads is shown to be suboptimal for current NUMA machines. The policy uses outdated assumptions and it generates a constant thread count. In fact, the Hotspot JVM still uses this policy in the production version. This research shows that the optimal number of garbage collection threads is application-specific and configuring the optimal number of garbage collection threads yields better collection throughput than the default policy. Fifth, this dissertation designs and implements a runtime technique, which involves heuristics from dynamic collection behavior to calculate an optimal number of garbage collector threads for each collection cycle. The results show an average of 21% improvements to the garbage collection performance for DaCapo benchmarks.

Applicazione ROS 2 di un robot antropomorfo in esecuzione su container VxWorks in architettura IMA

L’elaborato di tesi discute del progetto di integrazione tra ROS 2, framework open-source per lo sviluppo di applicazioni robotiche, e VxWorks, sistema operativo in tempo reale (RTOS), attraverso l’utilizzo di container OCI compliant su VxWorks. L’integrazione è stata svolta all’interno dello stack software di IMA (Industria Macchine Automatiche). Il progetto ha dunque integrato ROS 2 Humble e VxWorks 7 permettendo l’utilizzo di costrutti software di ROS 2 su dei container in esecuzione a livello User su VxWorks. Successivamente è stata creata una applicazione di pick and place con un robot antropomorfo (Universal Robots Ur5e) avvalendosi di ROS 2 Control, framework per l’introduzione e gestione di hardware e controllori, e MoveIt 2, framework per incorporare algoritmi di motion-planning, cinematica, controllo e navigazione. Una volta progettata l’applicazione, il sistema è stato integrato all’interno dell’architettura di controllo di IMA. L’architettura a container VxWorks di IMA è stata estesa per il caso ROS 2, la comunicazione tra campo e applicazione ROS 2 è passata tramite il master EtherCAT e il modulo WebServer presenti nell’architettura IMA. Una volta eseguito il container ROS 2 posizione e velocità dei servo motori sono stati inviati tramite al WebServer di IMA sfruttando la comunicazione VLAN interna. Una volta ricevuto il messaggio, il WebServer si è occupato di trasferirlo al master EtherCAT che in aggiunta si è occupato anche di ottenere le informazioni sullo stato attuale del robot. L’intero progetto è stato sviluppato in prima battuta in ambiente di simulazione per validarne l’architettura. Successivamente si è passati all’installazione in ambiente embedded grazie all’ausilio di IPC sui quali è stato testato l’effettivo funzionamento dell’integrazione all’interno dell’architettura IMA.

Matrix based Key Generation to Enhance Key Avalanche in Advanced Encryption Standard

In symmetric block ciphers, substitution and diffusion operations are performed in multiple rounds using sub-keys generated from a key generation procedure called key schedule. The key schedule plays a very important role in deciding the security of block ciphers. In this paper we propose a complex key generation procedure, based on matrix manipulations, which could be introduced in symmetric ciphers. The proposed key generation procedure offers two advantages. First, the procedure is simple to implement and has complexity in determining the sub-keys through crypt analysis. Secondly, the procedure produces a strong avalanche effect making many bits in the output block of a cipher to undergo changes with one bit change in the secret key. As a case study, matrix based key generation procedure has been introduced in Advanced Encryption Standard (AES) by replacing the existing key schedule of AES. The key avalanche and differential key propagation produced in AES have been observed. The paper describes the matrix based key generation procedure and the enhanced key avalanche and differential key propagation produced in AES. It has been shown that, the key avalanche effect and differential key propagation characteristics of AES have improved by replacing the AES key schedule with the Matrix based key generation procedure

Independent Domain of Symmetric Encryption using Least SignificantBit : Computer Vision, Steganography and Cryptography Techniques

The rapid development of data transfer through internet made it easier to send the data accurate and faster to the destination. There are many transmission media to transfer the data to destination like e-mails; at the same time it is may be easier to modify and misuse the valuable information through hacking. So, in order to transfer the data securely to the destination without any modifications, there are many approaches like cryptography and steganography. This paper deals with the image steganography as well as with the different security issues, general overview of cryptography, steganography and digital watermarking approaches.  The problem of copyright violation of multimedia data has increased due to the enormous growth of computer networks that provides fast and error free transmission of any unauthorized duplicate and possibly manipulated copy of multimedia information. In order to be effective for copyright protection, digital watermark must be robust which are difficult to remove from the object in which they are embedded despite a variety of possible attacks. The message to be send safe and secure, we use watermarking. We use invisible watermarking to embed the message using LSB (Least Significant Bit) steganographic technique. The standard LSB technique embed the message in every pixel, but my contribution for this proposed watermarking, works with the hint for embedding the message only on the image edges alone. If the hacker knows that the system uses LSB technique also, it cannot decrypt correct message. To make my system robust and secure, we added cryptography algorithm as Vigenere square. Whereas the message is transmitted in cipher text and its added advantage to the proposed system. The standard Vigenere square algorithm works with either lower case or upper case. The proposed cryptography algorithm is Vigenere square with extension of numbers also. We can keep the crypto key with combination of characters and numbers. So by using these modifications and updating in this existing algorithm and combination of cryptography and steganography method we develop a secure and strong watermarking method. Performance of this watermarking scheme has been analyzed by evaluating the robustness of the algorithm with PSNR (Peak Signal to Noise Ratio) and MSE (Mean Square Error) against the quality of the image for large amount of data. While coming to see results of the proposed encryption, higher value of 89dB of PSNR with small value of MSE is 0.0017. Then it seems the proposed watermarking system is secure and robust for hiding secure information in any digital system, because this system collect the properties of both steganography and cryptography sciences.

Current density mapping approach for design of clinical magnetic resonance imaging magnets

Novel current density mapping (CDM) schemes are developed for the design of new actively shielded, clinical magnetic resonance imaging (MRI) magnets. This is an extended inverse method in which the entire potential solution space for the superconductors has been considered, rather than single current density layers. The solution provides an insight into the required superconducting coil pattern for a desired magnet configuration. This information is then used as an initial set of parameters for the magnet structure, and a previously developed hybrid numerical optimization technique is used to obtain the final geometry of the magnet. The CDM scheme is applied to the design of compact symmetric, asymmetric, and open architecture 1.0-1.5 T MRI magnet systems of novel geometry and utility. A new symmetric 1.0-T system that is just I m in length with a full 50-cm diameter of the active, or sensitive, volume (DSV) is detailed, as well as an asymmetric system in which a 50-cm DSV begins just 14 cm from the end of the coil structure. Finally a 1.0-T open magnet system with a full 50-cm DSV is presented. These new designs provide clinically useful homogeneous regions and have appropriately restricted stray fields but, in some of the designs, the DSV is much closer to the end of the magnet system than in conventional designs. These new designs have the potential to reduce patient claustrophobia and improve physician access to patients undergoing scans. (C) 2002 Wiley Periodicals, Inc.

Application of the EcoBlock method to eco-design - electric hand dryers versus paper towels

Sustainable Construction, Materials and Practice, p. 426-432

A multicase study for the evaluation of a pattern-based visual design process for collaborative learning

Collage is a pattern-based visual design authoring tool for the creation of collaborative learning scripts computationally modelled with IMS Learning Design (LD). The pattern-based visual approach aims to provide teachers with design ideas that are based on broadly accepted practices. Besides, it seeks hiding the LD notation so that teachers can easily create their own designs. The use of visual representations supports both the understanding of the design ideas and the usability of the authoring tool. This paper presents a multicase study comprising three different cases that evaluate the approach from different perspectives. The first case includes workshops where teachers use Collage. A second case implies the design of a scenario proposed by a third-party using related approaches. The third case analyzes a situation where students follow a design created with Collage. The cross-case analysis provides a global understanding of the possibilities and limitations of the pattern-based visual design approach.

Computer-Aided Business Model Design

There is a lack of dedicated tools for business model design at a strategic level. However, in today's economic world the need to be able to quickly reinvent a company's business model is essential to stay competitive. This research focused on identifying the functionalities that are necessary in a computer-aided design (CAD) tool for the design of business models in a strategic context. Using design science research methodology a series of techniques and prototypes have been designed and evaluated to offer solutions to the problem. The work is a collection of articles which can be grouped into three parts: First establishing the context of how the Business Model Canvas (BMC) is used to design business models and explore the way in which CAD can contribute to the design activity. The second part extends on this by proposing new technics and tools which support elicitation, evaluation (assessment) and evolution of business models design with CAD. This includes features such as multi-color tagging to easily connect elements, rules to validate coherence of business models and features that are adapted to the correct business model proficiency level of its users. A new way to describe and visualize multiple versions of a business model and thereby help in addressing the business model as a dynamic object was also researched. The third part explores extensions to the business model canvas such as an intermediary model which helps IT alignment by connecting business model and enterprise architecture. And a business model pattern for privacy in a mobile environment, using privacy as a key value proposition. The prototyped techniques and proposition for using CAD tools in business model modeling will allow commercial CAD developers to create tools that are better suited to the needs of practitioners.